电导率是稀土矿渣玻璃陶瓷熔融过程中最重要的物性参数之一,研究电导率对玻璃熔体熔炼工艺优化有指导作用。为了研究尾矿玻璃陶瓷生产制造的熔融过程中稀土对熔体电导率的作用,使用分析纯试剂根据玻璃陶瓷主要化学成分制备玻璃陶瓷熔体...电导率是稀土矿渣玻璃陶瓷熔融过程中最重要的物性参数之一,研究电导率对玻璃熔体熔炼工艺优化有指导作用。为了研究尾矿玻璃陶瓷生产制造的熔融过程中稀土对熔体电导率的作用,使用分析纯试剂根据玻璃陶瓷主要化学成分制备玻璃陶瓷熔体样品,采用交流四电极法研究稀土对玻璃熔体电导率的影响规律,并结合红外光谱技术分析解释熔体电导率的变化机理。研究结果表明,硅酸盐熔体中添加La_(2)O_(3)或提高CaO/SiO_(2)比值会使熔体网络结构解聚,有效提高熔体电导率,且电导率的活化能(Activation energy of electrical conductivity)与La_(2)O_(3)含量和CaO/SiO_(2)比呈负相关关系;CaO/SiO_(2)比值较低时,La_(2)O_(3)含量对活化能影响更加显著,且红外光谱曲线硅酸盐结构带高波数段变化更明显,说明熔体结构发生更强烈的解聚效应;La_(2)O_(3)在CaO/SiO_(2)比值较低时对熔体网络结构和电导率的影响更大。展开更多
The SiO_(2)'-CaO/(CaO+K_(2)O)(S'CK)diagram is an empirically derived major element-based equivalent to the modal IUGS alkali feldspar-quartz-plagioclase classification scheme for granitoids.It employs the cont...The SiO_(2)'-CaO/(CaO+K_(2)O)(S'CK)diagram is an empirically derived major element-based equivalent to the modal IUGS alkali feldspar-quartz-plagioclase classification scheme for granitoids.It employs the content of SiO_(2)and CaO/(CaO+K_(2)O)ratio to approximate the IUGS classification diagram and a normative-based Q'-ANOR plot.Four trends have been superimposed onto the SiO_(2)'-CaO/(CaO+K_(2)O)diagram based on published datasets from the Peninsular Ranges(calcic:C),Tuolumne(calc-alkalic:CA),Sherman(alkali-calcic:AC),and Bjerkreim-Sokndal(alkalic:A)batholiths,which were employed to constrain the positions of the C-CA,CA-AC and AC-A suite boundaries on the SiO_(2)versus(Na_(2)O+K_(2)O-CaO)(or modified alkali-lime index,MALI)granitic classification diagram.A merit of the SiO_(2)'-CaO/(CaO+K_(2)O)plot is identifying rock types comprising a suite and their relative abundances.The distinguished projections of five typical granitoid assemblages,which are summarized by Bonin et al.(2020),demonstrate the ability of SiO_(2)'-CaO/(CaO+K_(2)O)diagram to decipher their petrogenesis.The SiO_(2)'-CaO/(CaO+K_(2)O)plots for the plutonic suites of'known'tectonic settings can reveal their evolution paths and the lithological statistics.Accordingly,it is suggested that the SiO_(2)'-CaO/(CaO+K_(2)O)plot can distinguish the tectonic environments of plutonic suits by comparing the plutonic suites or batholiths of'unknown'tectonic context to the published datasets from granitoid suites formed within'known'tectonic settings.The modified SiO_(2)'-CaO/(CaO+K_(2)O)diagram links the bulk chemical composition of granitoid suites to the likely source,magmatic evolution,and tectonic setting;thus,it may be a useful tectono-magmatic classification scheme for granitoid suites.展开更多
High-temperature experiments were carried out for the slag systems of“FeO”−SiO_(2)−CaO−Al_(2)O_(3)and“FeO”−SiO_(2)−CaO−MgO at 1200℃and p(O_(2))of 10^(−7)kPa.The equilibrated samples were quenched,and the phase co...High-temperature experiments were carried out for the slag systems of“FeO”−SiO_(2)−CaO−Al_(2)O_(3)and“FeO”−SiO_(2)−CaO−MgO at 1200℃and p(O_(2))of 10^(−7)kPa.The equilibrated samples were quenched,and the phase compositions were measured by electron probe microanalysis(EPMA).A series of pseudo-ternary and pseudo-binary phase diagrams are constructed to demonstrate their applications in copper smelting process and evaluation of the thermodynamic database.Spinel and tridymite are identified to be the major primary phases in the composition range related to the copper smelting slags.It is found that the operating window of the smelting slag is primarily determined by w_(Fe)/w_(SiO_(2))ratio in the slag.Both MgO and Al_(2)O_(3)in the slag reduce the operating window which requires extra fluxing agent to keep the slag to be fully liquid.Complex spinel solid solutions cause inaccurate predictions of the current thermodynamic database.展开更多
The high-carbon ferrochrome is an essential raw material for producing stainless steel,and the demand of it increases with the increase of stainless steel.So increasing Cr recovery rate from chromite is essential for ...The high-carbon ferrochrome is an essential raw material for producing stainless steel,and the demand of it increases with the increase of stainless steel.So increasing Cr recovery rate from chromite is essential for lower costs and higher economic benefits in high-carbon ferrochrome production process.This study calculated the activity of CrO_(x)in slag and investigated the distribution behavior of Cr between slag and alloy.Theω(MgO)/ω(Al_(2)O_(3))was 1.0,and the w(CaO)/w(SiO_(2))was from 0.2 to 0.6 in this study.The calculation and experimental results showed that the main phases of the slag were chrome-containing spinel,magnesium-aluminum spinel,olivine and melilite.The content of spinel in slag decreased with the increasing w(CaO)/w(SiO_(2)),and the w(CrO_(x))in spinel also reduced,but the content of melilite increased.The distribution ratio of Cr between slag and alloy decreased with the increase of slag basicity at 1600℃,meansning that increasing the w(CaO)/w(SiO_(2))of slag can improve the recovery of Cr in chromite smelting process.展开更多
The formation characteristics of calcium aluminates in the CaO-Al2O3-SiO2 system with sodium oxide was investigated by XRD, SEM-EDS and DSC-TG technologies. The main phases in the clinker after sintering at 1350 °...The formation characteristics of calcium aluminates in the CaO-Al2O3-SiO2 system with sodium oxide was investigated by XRD, SEM-EDS and DSC-TG technologies. The main phases in the clinker after sintering at 1350 °C are 12CaO?7Al2O3, 2CaO?Al2O3?SiO2 and 2CaO?SiO2 when the mass ratio of Al2O3 to SiO2 is 3.0 and the molar ratio of CaO to Al2O3 is 1.0. The proportion of 12CaO?7Al2O3 increases with the increase of Na2O addition when the molar ratio of Na2O to Al2O3 is from 0 to 0.4, while the proportion of 2CaO?Al2O3?SiO2 decreases with the increase of Na2O addition. Na2O forms solid solution in 12CaO?7Al2O3, which increases the volume of elementary cell of 12CaO?7Al2O3. The formation temperature of 12CaO?7Al2O3 is decreased by 30 °C when the molar ratio of Na2O to Al2O3 increases from 0 to 0.4 determined by DSC. The alumina leaching property of clinker increases obviously with the increase of Na2O addition.展开更多
文摘电导率是稀土矿渣玻璃陶瓷熔融过程中最重要的物性参数之一,研究电导率对玻璃熔体熔炼工艺优化有指导作用。为了研究尾矿玻璃陶瓷生产制造的熔融过程中稀土对熔体电导率的作用,使用分析纯试剂根据玻璃陶瓷主要化学成分制备玻璃陶瓷熔体样品,采用交流四电极法研究稀土对玻璃熔体电导率的影响规律,并结合红外光谱技术分析解释熔体电导率的变化机理。研究结果表明,硅酸盐熔体中添加La_(2)O_(3)或提高CaO/SiO_(2)比值会使熔体网络结构解聚,有效提高熔体电导率,且电导率的活化能(Activation energy of electrical conductivity)与La_(2)O_(3)含量和CaO/SiO_(2)比呈负相关关系;CaO/SiO_(2)比值较低时,La_(2)O_(3)含量对活化能影响更加显著,且红外光谱曲线硅酸盐结构带高波数段变化更明显,说明熔体结构发生更强烈的解聚效应;La_(2)O_(3)在CaO/SiO_(2)比值较低时对熔体网络结构和电导率的影响更大。
文摘The SiO_(2)'-CaO/(CaO+K_(2)O)(S'CK)diagram is an empirically derived major element-based equivalent to the modal IUGS alkali feldspar-quartz-plagioclase classification scheme for granitoids.It employs the content of SiO_(2)and CaO/(CaO+K_(2)O)ratio to approximate the IUGS classification diagram and a normative-based Q'-ANOR plot.Four trends have been superimposed onto the SiO_(2)'-CaO/(CaO+K_(2)O)diagram based on published datasets from the Peninsular Ranges(calcic:C),Tuolumne(calc-alkalic:CA),Sherman(alkali-calcic:AC),and Bjerkreim-Sokndal(alkalic:A)batholiths,which were employed to constrain the positions of the C-CA,CA-AC and AC-A suite boundaries on the SiO_(2)versus(Na_(2)O+K_(2)O-CaO)(or modified alkali-lime index,MALI)granitic classification diagram.A merit of the SiO_(2)'-CaO/(CaO+K_(2)O)plot is identifying rock types comprising a suite and their relative abundances.The distinguished projections of five typical granitoid assemblages,which are summarized by Bonin et al.(2020),demonstrate the ability of SiO_(2)'-CaO/(CaO+K_(2)O)diagram to decipher their petrogenesis.The SiO_(2)'-CaO/(CaO+K_(2)O)plots for the plutonic suites of'known'tectonic settings can reveal their evolution paths and the lithological statistics.Accordingly,it is suggested that the SiO_(2)'-CaO/(CaO+K_(2)O)plot can distinguish the tectonic environments of plutonic suits by comparing the plutonic suites or batholiths of'unknown'tectonic context to the published datasets from granitoid suites formed within'known'tectonic settings.The modified SiO_(2)'-CaO/(CaO+K_(2)O)diagram links the bulk chemical composition of granitoid suites to the likely source,magmatic evolution,and tectonic setting;thus,it may be a useful tectono-magmatic classification scheme for granitoid suites.
文摘High-temperature experiments were carried out for the slag systems of“FeO”−SiO_(2)−CaO−Al_(2)O_(3)and“FeO”−SiO_(2)−CaO−MgO at 1200℃and p(O_(2))of 10^(−7)kPa.The equilibrated samples were quenched,and the phase compositions were measured by electron probe microanalysis(EPMA).A series of pseudo-ternary and pseudo-binary phase diagrams are constructed to demonstrate their applications in copper smelting process and evaluation of the thermodynamic database.Spinel and tridymite are identified to be the major primary phases in the composition range related to the copper smelting slags.It is found that the operating window of the smelting slag is primarily determined by w_(Fe)/w_(SiO_(2))ratio in the slag.Both MgO and Al_(2)O_(3)in the slag reduce the operating window which requires extra fluxing agent to keep the slag to be fully liquid.Complex spinel solid solutions cause inaccurate predictions of the current thermodynamic database.
基金Project(2023XQLH055)supported by Central South University Graduate Research Innovation Project(University-Enterprise Joint Project),China。
文摘The high-carbon ferrochrome is an essential raw material for producing stainless steel,and the demand of it increases with the increase of stainless steel.So increasing Cr recovery rate from chromite is essential for lower costs and higher economic benefits in high-carbon ferrochrome production process.This study calculated the activity of CrO_(x)in slag and investigated the distribution behavior of Cr between slag and alloy.Theω(MgO)/ω(Al_(2)O_(3))was 1.0,and the w(CaO)/w(SiO_(2))was from 0.2 to 0.6 in this study.The calculation and experimental results showed that the main phases of the slag were chrome-containing spinel,magnesium-aluminum spinel,olivine and melilite.The content of spinel in slag decreased with the increasing w(CaO)/w(SiO_(2)),and the w(CrO_(x))in spinel also reduced,but the content of melilite increased.The distribution ratio of Cr between slag and alloy decreased with the increase of slag basicity at 1600℃,meansning that increasing the w(CaO)/w(SiO_(2))of slag can improve the recovery of Cr in chromite smelting process.
基金Projects(51174054,51104041)supported by the National Natural Science Foundation of China
文摘The formation characteristics of calcium aluminates in the CaO-Al2O3-SiO2 system with sodium oxide was investigated by XRD, SEM-EDS and DSC-TG technologies. The main phases in the clinker after sintering at 1350 °C are 12CaO?7Al2O3, 2CaO?Al2O3?SiO2 and 2CaO?SiO2 when the mass ratio of Al2O3 to SiO2 is 3.0 and the molar ratio of CaO to Al2O3 is 1.0. The proportion of 12CaO?7Al2O3 increases with the increase of Na2O addition when the molar ratio of Na2O to Al2O3 is from 0 to 0.4, while the proportion of 2CaO?Al2O3?SiO2 decreases with the increase of Na2O addition. Na2O forms solid solution in 12CaO?7Al2O3, which increases the volume of elementary cell of 12CaO?7Al2O3. The formation temperature of 12CaO?7Al2O3 is decreased by 30 °C when the molar ratio of Na2O to Al2O3 increases from 0 to 0.4 determined by DSC. The alumina leaching property of clinker increases obviously with the increase of Na2O addition.
