Reducing the power and energy required by the device/circuit to operate is the main aim of this paper. Here the new design is implemented to reduce the power consumption of the device using the triggering pulses. The ...Reducing the power and energy required by the device/circuit to operate is the main aim of this paper. Here the new design is implemented to reduce the power consumption of the device using the triggering pulses. The proposed triggering method uses a complementary MOS transistor (pMOS and nMOS) as a voltage divider and ground leakage suppressor (i.e.);these designs are named as Trig01 and Trig10 designs. In Trig01 design the pair of CMOS is placed in the voltage divider part;similarly in Trig10 design the pair of CMOS is placed at the ground leakage suppressor part. Standard CMOS gates like NOT, NAND, NOR, EX-OR etc. are designed with these technologies and these gates are designed with 180 nm technology file in the cadence tool suite;compared to the normal CMOS gates, the Bi-Trig gate contains 4 inputs and 2 outputs. The two extra inputs are used as Bi-Trig control signaling inputs. There are 2 control inputs and thus 2<sup>2</sup> = 4 combination of controlling is done (i.e.);both pMOS and nMOS are ON, both pMOS and nMOS are OFF, pMOS ON and nMOS OFF and pMOS ON and nMOS ON. Depending on the usage of the circuit, the mode of operation is switched to any one of the combination. If the output of the circuit is not used anywhere in the total block, that specified circuit can be switched into idle mode by means of switched OFF both the pMOS and nMOS transistor in the control unit. This reduces the leakage current and also the power wastage of the circuits in the total block. Bi-Trig controlled circuit reduces the power consumption and leakage power of the circuit without affecting a performance of the circuits.展开更多
Dear Editor,This letter deals with the controller synthesis problem of networked Takagi-Sugeno(T-S)fuzzy systems.Due to the introduction of network communications,the same premise is no longer shared by fuzzy plants a...Dear Editor,This letter deals with the controller synthesis problem of networked Takagi-Sugeno(T-S)fuzzy systems.Due to the introduction of network communications,the same premise is no longer shared by fuzzy plants and fuzzy controllers.This makes the classic parallel distribution compensation(PDC)control infeasible.To overcome this situation,a novel method for reconstructing the membership functions'grades is proposed,which synchronizes the time scales.Then,the membership function dependent method is adopted to introduce asynchronous errors and detailed membership function information.For the event-triggered control strategy,a series of robust H∞stable conditions in LMI form are derived.Finally,a simulation of a practical system is used to demonstrate the method proposed in this letter can reduce conservatism.展开更多
In this study,the vertical components of broadband teleseismic P wave data recorded by China Earthquake Network are used to image the rupture processes of the February 6th,2023 Turkish earthquake doublet via back proj...In this study,the vertical components of broadband teleseismic P wave data recorded by China Earthquake Network are used to image the rupture processes of the February 6th,2023 Turkish earthquake doublet via back projection analysis.Data in two frequency bands(0.5-2 Hz and 1-3 Hz)are used in the imaging processes.The results show that the rupture of the first event extends about 200 km to the northeast and about 150 km to the southwest,lasting~90 s in total.The southwestern rupture is triggered by the northeastern rupture,demonstrating a sequential bidirectional unilateral rupture pattern.The rupture of the second event extends approximately 80 km in both northeast and west directions,lasting~35 s in total and demonstrates a typical bilateral rupture feature.The cascading ruptures on both sides also reflect the occurrence of selective rupture behaviors on bifurcated faults.In addition,we observe super-shear ruptures on certain fault sections with relatively straight fault structures and sparse aftershocks.展开更多
网络控制系统通过通信网络连接传感器、控制器和执行器,实现远程监控和智能控制,具有突破地域限制的优势,但其开放性和网络依赖性也引入了诸多问题。首先,系统分析了网络控制系统中存在的信号量化误差、数据包丢失、网络时延、带宽占用...网络控制系统通过通信网络连接传感器、控制器和执行器,实现远程监控和智能控制,具有突破地域限制的优势,但其开放性和网络依赖性也引入了诸多问题。首先,系统分析了网络控制系统中存在的信号量化误差、数据包丢失、网络时延、带宽占用和网络安全威胁等问题;其次,在回顾网络控制系统研究成果的基础上,提出了新的控制策略,包括新型量化控制、随机丢包控制、时变时延的自触发控制、变采样周期智能调度控制、动态事件触发控制、DoS(denial of service)攻击的网络控制等;再次,归纳了相关的控制理论方法,包括随机系统法、预测控制法、时延估算与补偿、模糊反馈法、神经网络预测法;最后,提出了网络控制系统研究在未来面临的挑战。展开更多
利用无狭缝摄谱技术获取了中国广东一次人工触发闪电通道等离子体的光谱.基于光谱诊断方法确定了该触发闪电通道电流的最大值与最小值分别为30.9 kA和25.6 kA,并采用线性电流衰减传输线模型(modified transmission line with linear cur...利用无狭缝摄谱技术获取了中国广东一次人工触发闪电通道等离子体的光谱.基于光谱诊断方法确定了该触发闪电通道电流的最大值与最小值分别为30.9 kA和25.6 kA,并采用线性电流衰减传输线模型(modified transmission line with linear current decay,MTLL)对电流进行了模拟.在此基础上,采用时域有限差分方法(finite-difference time-domain,FDTD)和传输线模型研究了不同距离处的电场分布特征,并对58 m处产生的电场进行了比较.结果发现:当回击速度取1.3×10^(8) m/s时,辐射电场与实验垂直电场偏差较大,但与FDTD方法模拟的垂直电场符合一致.进一步,采用FDTD方法、偶极子方法、电荷-磁场极限估算法研究了58 m,90 m,1.6 km的磁场分布.与实验数据比较发现:不同计算方法与实验值在58 m和90 m处有一定差异,但在1.6 km处符合一致.展开更多
为解决四自由度(4 degree-of-freedom,4-DOF)无人水面船在动态不确定性和外部扰动下的路径跟踪问题,提出一种基于有限时间积分视线(finite-time integral line-of-sight,FT-ILOS)制导的自适应神经网络路径跟踪控制方法。在视线(line-of-...为解决四自由度(4 degree-of-freedom,4-DOF)无人水面船在动态不确定性和外部扰动下的路径跟踪问题,提出一种基于有限时间积分视线(finite-time integral line-of-sight,FT-ILOS)制导的自适应神经网络路径跟踪控制方法。在视线(line-of-sight,LOS)制导框架下,利用有限时间理论,引入积分机制和新的制导机制,实现船舶位置跟踪误差的有限时间收敛,且避免制导积分项引起的饱和风险。基于反步控制法设计框架,结合FT-ILOS制导方法,利用自适应神经网络逼近复合扰动项,利用虚拟参数学习技术解决“维数灾难”问题,同时利用动态面控制技术降低计算复杂度。为减少执行器响应频率和磨损,在控制律与执行器之间建立周期事件触发协议。通过李雅普诺夫稳定性分析证明闭环控制系统中所有信号均有界,通过MATLAB仿真对比实验验证所提控制方法的有效性和鲁棒性。展开更多
文摘Reducing the power and energy required by the device/circuit to operate is the main aim of this paper. Here the new design is implemented to reduce the power consumption of the device using the triggering pulses. The proposed triggering method uses a complementary MOS transistor (pMOS and nMOS) as a voltage divider and ground leakage suppressor (i.e.);these designs are named as Trig01 and Trig10 designs. In Trig01 design the pair of CMOS is placed in the voltage divider part;similarly in Trig10 design the pair of CMOS is placed at the ground leakage suppressor part. Standard CMOS gates like NOT, NAND, NOR, EX-OR etc. are designed with these technologies and these gates are designed with 180 nm technology file in the cadence tool suite;compared to the normal CMOS gates, the Bi-Trig gate contains 4 inputs and 2 outputs. The two extra inputs are used as Bi-Trig control signaling inputs. There are 2 control inputs and thus 2<sup>2</sup> = 4 combination of controlling is done (i.e.);both pMOS and nMOS are ON, both pMOS and nMOS are OFF, pMOS ON and nMOS OFF and pMOS ON and nMOS ON. Depending on the usage of the circuit, the mode of operation is switched to any one of the combination. If the output of the circuit is not used anywhere in the total block, that specified circuit can be switched into idle mode by means of switched OFF both the pMOS and nMOS transistor in the control unit. This reduces the leakage current and also the power wastage of the circuits in the total block. Bi-Trig controlled circuit reduces the power consumption and leakage power of the circuit without affecting a performance of the circuits.
基金supported by the National Natural Science Foundation of China(62173218,61833011)International International Cooperation Project of Shanghai Science and Technology Commission(21190780300).
文摘Dear Editor,This letter deals with the controller synthesis problem of networked Takagi-Sugeno(T-S)fuzzy systems.Due to the introduction of network communications,the same premise is no longer shared by fuzzy plants and fuzzy controllers.This makes the classic parallel distribution compensation(PDC)control infeasible.To overcome this situation,a novel method for reconstructing the membership functions'grades is proposed,which synchronizes the time scales.Then,the membership function dependent method is adopted to introduce asynchronous errors and detailed membership function information.For the event-triggered control strategy,a series of robust H∞stable conditions in LMI form are derived.Finally,a simulation of a practical system is used to demonstrate the method proposed in this letter can reduce conservatism.
基金supported by the National Key R&D Program of China(No.2022YFF0800601)National Scientific Foundation of China(Nos.41930103 and 41774047).
文摘In this study,the vertical components of broadband teleseismic P wave data recorded by China Earthquake Network are used to image the rupture processes of the February 6th,2023 Turkish earthquake doublet via back projection analysis.Data in two frequency bands(0.5-2 Hz and 1-3 Hz)are used in the imaging processes.The results show that the rupture of the first event extends about 200 km to the northeast and about 150 km to the southwest,lasting~90 s in total.The southwestern rupture is triggered by the northeastern rupture,demonstrating a sequential bidirectional unilateral rupture pattern.The rupture of the second event extends approximately 80 km in both northeast and west directions,lasting~35 s in total and demonstrates a typical bilateral rupture feature.The cascading ruptures on both sides also reflect the occurrence of selective rupture behaviors on bifurcated faults.In addition,we observe super-shear ruptures on certain fault sections with relatively straight fault structures and sparse aftershocks.
文摘网络控制系统通过通信网络连接传感器、控制器和执行器,实现远程监控和智能控制,具有突破地域限制的优势,但其开放性和网络依赖性也引入了诸多问题。首先,系统分析了网络控制系统中存在的信号量化误差、数据包丢失、网络时延、带宽占用和网络安全威胁等问题;其次,在回顾网络控制系统研究成果的基础上,提出了新的控制策略,包括新型量化控制、随机丢包控制、时变时延的自触发控制、变采样周期智能调度控制、动态事件触发控制、DoS(denial of service)攻击的网络控制等;再次,归纳了相关的控制理论方法,包括随机系统法、预测控制法、时延估算与补偿、模糊反馈法、神经网络预测法;最后,提出了网络控制系统研究在未来面临的挑战。
文摘利用无狭缝摄谱技术获取了中国广东一次人工触发闪电通道等离子体的光谱.基于光谱诊断方法确定了该触发闪电通道电流的最大值与最小值分别为30.9 kA和25.6 kA,并采用线性电流衰减传输线模型(modified transmission line with linear current decay,MTLL)对电流进行了模拟.在此基础上,采用时域有限差分方法(finite-difference time-domain,FDTD)和传输线模型研究了不同距离处的电场分布特征,并对58 m处产生的电场进行了比较.结果发现:当回击速度取1.3×10^(8) m/s时,辐射电场与实验垂直电场偏差较大,但与FDTD方法模拟的垂直电场符合一致.进一步,采用FDTD方法、偶极子方法、电荷-磁场极限估算法研究了58 m,90 m,1.6 km的磁场分布.与实验数据比较发现:不同计算方法与实验值在58 m和90 m处有一定差异,但在1.6 km处符合一致.
文摘为解决四自由度(4 degree-of-freedom,4-DOF)无人水面船在动态不确定性和外部扰动下的路径跟踪问题,提出一种基于有限时间积分视线(finite-time integral line-of-sight,FT-ILOS)制导的自适应神经网络路径跟踪控制方法。在视线(line-of-sight,LOS)制导框架下,利用有限时间理论,引入积分机制和新的制导机制,实现船舶位置跟踪误差的有限时间收敛,且避免制导积分项引起的饱和风险。基于反步控制法设计框架,结合FT-ILOS制导方法,利用自适应神经网络逼近复合扰动项,利用虚拟参数学习技术解决“维数灾难”问题,同时利用动态面控制技术降低计算复杂度。为减少执行器响应频率和磨损,在控制律与执行器之间建立周期事件触发协议。通过李雅普诺夫稳定性分析证明闭环控制系统中所有信号均有界,通过MATLAB仿真对比实验验证所提控制方法的有效性和鲁棒性。
