The two-dimensional grating serves as a critical component in plane grating interferometers for achieving high-precision multidimensional displacement measurements.The calibration of grating groove density and orthogo...The two-dimensional grating serves as a critical component in plane grating interferometers for achieving high-precision multidimensional displacement measurements.The calibration of grating groove density and orthogonality error of grating grooves not only improves the positioning accuracy of grating interferometers but also provides essential feedback for optimizing two-dimensional grating fabrication.This study proposes a method for simultaneous calibration of these parameters using orthogonal heterodyne laser interferometry.A two-dimensional grating interferometer is built with the grating to be measured,and a biaxial laser interferometer provides a displacement reference for it.The phase mapping relationship between grating interference and laser interference is established.The interference phase information obtained by any two displacements can simultaneously solve the above three parameters and obtain the grating installation error.The feasibility of the proposed method is verified by using a 1200 gr/mm two-dimensional grating.The standard deviation of the grating groove density in the X and Y directions is 0.012 gr/mm and 0.014 gr/mm,respectively.The standard deviation of the orthogonality error of grating grooves is 0.004°,and the standard deviation of the installation error is 0.002°.Compared with the atomic force microscope method,the consistency of the grating groove density in the X and Y directions is better than 0.03 gr/mm and 0.06 gr/mm,and the orthogonality error of grating grooves is better than 0.008°.The experimental results show that the proposed method can be simply and efficiently applied to the calibration of the grating line parameters of the two-dimensional grating.展开更多
Catalytic decomposition of methane,which produces high-purity hydrogen and high-value-added carbon nanomaterials,has shown considerable potential for development and is expected to yield significant economic benefits ...Catalytic decomposition of methane,which produces high-purity hydrogen and high-value-added carbon nanomaterials,has shown considerable potential for development and is expected to yield significant economic benefits in the future.However,designing catalysts that simultaneously exhibit high activity and long-term stability remains a significant challenge.Tuning the catalyst’s structure and electronic properties is an effective strategy for enhancing the reaction performance.In this work,a series of NixZr/ZSM-5 catalysts were prepared using the incipient wetness impregnation method,and the effect of Zr loadings on catalyst properties and performance was systematically investigated.The calcined and reduced catalysts were characterized by low-temperature N_(2)adsorption-desorption,XRD,SEM,H_(2)-TPR and XPS.The results showed that the addition of Zr significantly increased the specific surface area of the catalyst and reduced the metal particle size.Smaller NiO particles were found to enter the pores of the HZSM-5 support,and electronic interactions between NiO and ZrO_(2)markedly enhanced the metal-support interaction.The catalyst exhibited optimal catalytic performance at a Zr loading of 5%,achieving a maximum methane conversion of 68%at 625℃,maintaining activity for 900 min,and delivering a carbon yield of 1927%.Further increasing the Zr loading yielded only limited improvements in catalytic performance.Characterization of the spent catalysts and carbon products via TEM,Raman spectroscopy,and TGA revealed that the introduction of ZrO_(2)reduced metal sintering and promoted a shift in carbon nanofibers growth mode from tip-growth to base-growth.The mechanism of base-growth enabled the catalyst to maintain reaction activity for an extended period.展开更多
Chemical warfare agents(CWAs)remain a persistent hazard in many parts of the world,necessitating a deeper exploration of their chemical and physical characteristics and reactions under diverse conditions.Diisopropyl m...Chemical warfare agents(CWAs)remain a persistent hazard in many parts of the world,necessitating a deeper exploration of their chemical and physical characteristics and reactions under diverse conditions.Diisopropyl methylphosphonate(DIMP),a commonly used CWA surrogate,is widely studied to enhance our understanding of CWA behavior.The prevailing thermal decomposition model for DIMP,developed approximately 25 years ago,is based on data collected in nitrogen atmospheres at temperatures ranging from 700 K to 800 K.Despite its limitations,this model continues to serve as a foundation for research across various thermal and reactive environments,including combustion studies.Our recent experiments have extended the scope of decomposition analysis by examining DIMP in both nitrogen and zero air across a lower temperature range of 175℃ to 250℃.Infrared spectroscopy results under nitrogen align well with the established model;however,we observed that catalytic effects,stemming from decomposition byproducts and interactions with stainless steel surfaces,alter the reaction kinetics.In zero air environments,we observed a novel infrared absorption band.Spectral fitting suggests this band may represent a combination of propanal and acetone,while GCMS analysis points to vinyl formate and acetone as possible constituents.Although the precise identity of these new products remains unresolved,our findings clearly indicate that the existing decomposition model cannot be reliably extended to lower temperatures or non-nitrogen environments without further revisions.展开更多
As emerging two-dimensional(2D)materials,carbides and nitrides(MXenes)could be solid solutions or organized structures made up of multi-atomic layers.With remarkable and adjustable electrical,optical,mechanical,and el...As emerging two-dimensional(2D)materials,carbides and nitrides(MXenes)could be solid solutions or organized structures made up of multi-atomic layers.With remarkable and adjustable electrical,optical,mechanical,and electrochemical characteristics,MXenes have shown great potential in brain-inspired neuromorphic computing electronics,including neuromorphic gas sensors,pressure sensors and photodetectors.This paper provides a forward-looking review of the research progress regarding MXenes in the neuromorphic sensing domain and discussed the critical challenges that need to be resolved.Key bottlenecks such as insufficient long-term stability under environmental exposure,high costs,scalability limitations in large-scale production,and mechanical mismatch in wearable integration hinder their practical deployment.Furthermore,unresolved issues like interfacial compatibility in heterostructures and energy inefficiency in neu-romorphic signal conversion demand urgent attention.The review offers insights into future research directions enhance the fundamental understanding of MXene properties and promote further integration into neuromorphic computing applications through the convergence with various emerging technologies.展开更多
The sulfation and decomposition process has proven effective in selectively extracting lithium from lepidolite.It is essential to clarify the thermochemical behavior and kinetic parameters of decomposition reactions.A...The sulfation and decomposition process has proven effective in selectively extracting lithium from lepidolite.It is essential to clarify the thermochemical behavior and kinetic parameters of decomposition reactions.Accordingly,comprehensive kinetic study by employing thermalgravimetric analysis at various heating rates was presented in this paper.Two main weight loss regions were observed during heating.The initial region corresponded to the dehydration of crystal water,whereas the subsequent region with overlapping peaks involved complex decomposition reactions.The overlapping peaks were separated into two individual reaction peaks and the activation energy of each peak was calculated using isoconversional kinetics methods.The activation energy of peak 1 exhibited a continual increase as the reaction conversion progressed,while that of peak 2 steadily decreased.The optimal kinetic models,identified as belonging to the random nucleation and subsequent growth category,provided valuable insights into the mechanism of the decomposition reactions.Furthermore,the adjustment factor was introduced to reconstruct the kinetic mechanism models,and the reconstructed models described the kinetic mechanism model more accurately for the decomposition reactions.This study enhanced the understanding of the thermochemical behavior and kinetic parameters of the lepidolite sulfation product decomposition reactions,further providing theoretical basis for promoting the selective extraction of lithium.展开更多
Two-dimensional(2D)multilayer kagome materials hold significant research value for regulating kagome-related physical properties and exploring quantum effects.However,their development is hindered by the scarcity of a...Two-dimensional(2D)multilayer kagome materials hold significant research value for regulating kagome-related physical properties and exploring quantum effects.However,their development is hindered by the scarcity of available material systems,making the identification of novel 2D multilayer kagome candidates particularly important.In this work,three types of 2D materials with trilayer kagome lattices,namely Sc_(6)S_(5)X_(6)(X=Cl,Br,I),are predicted based on first-principles calculations.These 2D materials feature two kagome lattices composed of Sc atoms and one kagome lattice composed of S atoms.Stability analysis indicates that these materials can exist as free-standing 2D materials.Electronic structure calculations reveal that Sc_(6)S_(5)X_(6)are narrow-bandgap semiconductors(0.76–0.95 e V),with their band structures exhibiting flat bands contributed by Sc-based kagome lattices and Dirac band gaps resulting from symmetry breaking.The sulfur-based kagome lattice in the central layer contributes an independent flat band below the Fermi level.Additionally,Sc_(6)S_(5)X_(6)exhibit high carrier mobility,with hole and electron mobilities reaching up to 10^(3)cm^(2)·V^(-1)·s^(-1),indicating potential applications in low-dimensional electronic devices.This work provides an excellent example for the development of novel multilayer 2D kagome materials.展开更多
In the image fusion field,fusing infrared images(IRIs)and visible images(VIs)excelled is a key area.The differences between IRIs and VIs make it challenging to fuse both types into a high-quality image.Accordingly,eff...In the image fusion field,fusing infrared images(IRIs)and visible images(VIs)excelled is a key area.The differences between IRIs and VIs make it challenging to fuse both types into a high-quality image.Accordingly,efficiently combining the advantages of both images while overcoming their shortcomings is necessary.To handle this challenge,we developed an end-to-end IRI andVI fusionmethod based on frequency decomposition and enhancement.By applying concepts from frequency domain analysis,we used the layering mechanism to better capture the salient thermal targets from the IRIs and the rich textural information from the VIs,respectively,significantly boosting the image fusion quality and effectiveness.In addition,the backbone network combined Restormer Blocks and Dense Blocks;Restormer blocks utilize global attention to extract shallow features.Meanwhile,Dense Blocks ensure the integration between shallow and deep features,thereby avoiding the loss of shallow attributes.Extensive experiments on TNO and MSRS datasets demonstrated that the suggested method achieved state-of-the-art(SOTA)performance in various metrics:Entropy(EN),Mutual Information(MI),Standard Deviation(SD),The Structural Similarity Index Measure(SSIM),Fusion quality(Qabf),MI of the pixel(FMI_(pixel)),and modified Visual Information Fidelity(VIF_(m)).展开更多
Upper Andean tropical forests are renowned for their extraordinary biodiversity and heterogeneous environmental conditions.Despite the critical role of litter decomposition in carbon and nutrient cycles,its dynamics i...Upper Andean tropical forests are renowned for their extraordinary biodiversity and heterogeneous environmental conditions.Despite the critical role of litter decomposition in carbon and nutrient cycles,its dynamics in this region remains unexplored at finer scales.This study investigates how micro site conditions influence litter decomposition of 15 upper Andean species over time.A reciprocal translocation field experiment was conducted over 18 months in 14 permanent plots within four sites in Colombian Andean mountain forests.Each plot contained three litterbeds(microsites),each with the 15 species,harvested at 3,6,12 and 18 months,totaling 2520 litterbags.Different forest variables,including canopy openness,leaf area index,slope and depth of litter,were measured in each litterbed.ANOVAs and linear mixed models were used to assess variation between sites and plots respectively,while multiple linear regression analyses evaluated the effects of forest variables on decay rates over time at the micro site scale.Results showed differences in absolute decay rates between sites but consistent relative decay rates,indicating varying magnitudes of decomposition,yet maintaining the same order based on their litter quality.Decay rates varied between species,with more variation in labile species compared to recalcitrant ones.Despite substantial variation in forest characteristics within sites,their influence on litter decomposition was minimal and declined over time.This suggests that,at finer spatial scales,the forest microenvironment plays a lesser role in litter decomposition,with litter quality emerging as the primary driver.This study is a step towards understanding the fine-scale dynamics of litter decomposition in upper Andean tropical forests,highlighting the intricate interplay between microenvironmental factors and decomposition processes.展开更多
Litter decomposition is an essential ecosystem process influenced by multiple factors,including substrate quality,climate,edaphic environment,and decomposer communities.However,the role of canopy species identity and ...Litter decomposition is an essential ecosystem process influenced by multiple factors,including substrate quality,climate,edaphic environment,and decomposer communities.However,the role of canopy species identity and diversity on leaf litter decomposition in forests remains understudied.By controlling for macroclimate,soil properties,and litter substrate in a mature common garden,we investigated whether a three-month tea bag incubation of standardized green and rooibos tea substrate is driven by canopy tree species characteristics and diversity.Our study hypothesized two primary pathways:a chemical engineering effect,where trees alter soil properties and decomposer communities through litter input,and a physical engineering effect,where tree canopy structure modulates the local microclimate.The results showed that even under uniform macroclimatic and initial soil conditions,mass loss rates varied widely for green tea(27.4%–73.2%)and rooibos tea(6.1%–34.7%),comparable as found in other research between distinct biomes.While substrate quality was the dominant factor,both engineering pathways and,to a minor extent,tree diversity modulated mass losses.For green tea,tree chemical and physical characteristics seemed equally important,while the physical environment showed an increased importance for rooibos.Incubation depth played a key role,where forest floor decomposition rates are more susceptible to temporal climate variations,and soil-layer decomposition rates are less susceptible to climate variations and more determined by tree species identity.Our findings suggest that tea bag experiments focusing solely on topsoil burial may underestimate processes in the forest floor and the mineralorganic boundary layer.This study underscores the critical role of litter substrate quality in decomposition while demonstrating that tree community composition and the associated herbaceous layer,through both chemical and physical engineering pathways,strongly modulate decomposition rates.展开更多
Renewable electricity-driven production of value-added sulfur and H_(2)via electrocatalytic H_(2)S decomposition represents a sustainable route to conventional thermocatalysis.Both the electrocatalyst and electrolyte ...Renewable electricity-driven production of value-added sulfur and H_(2)via electrocatalytic H_(2)S decomposition represents a sustainable route to conventional thermocatalysis.Both the electrocatalyst and electrolyte solution strongly impact the H_(2)S decomposition performance.Despite significant progress in developing sophisticated electrocatalysts,a well-designed electrolyte solution in conjunction with industrial catalysts is an attractive strategy to advance the industrialization process of electrocatalytic H_(2)S decomposition,but remains unexplored.Here,for the first time,we design a solid-liquid-gas three-phase indirect electrolysis system based on a kind of CS_(2)-N electrolyte solution and Ni-Mo_(2)C that can efficiently enable H_(2)S decomposition into valuable H_(2)and sulfur.Specifically,the solid-phase Ni-Mo_(2)C as a heterogeneous redox mediator presents excellent electrocatalytic efficiency for the H_(2)S removal efficiency of up to 99%,and the formation of liquid-phase sulfur product(CS_(2)-N electrolyte solution dissolves sulfur,yield up to 95%)with the generation of gas-phase H_(2)product(~1.32 mL min^(-1)),resulting in an interesting three-phase indirect electrolysis system.Remarkably,it enables the scale-up production(~6 g in a batch experiment)of sulfur with continuous operation for 120 h without attenuation.This work may inaugurate a new electrocatalytic H_(2)S decomposition avenue to explore porous metal materials and electrolyte systems in simultaneous production of value-added sulfur and H_(2).展开更多
The integration of a high proportion of renewable energy introduces significant challenges for the adaptability of traditional fault nature identification methods.To address these challenges,this paper presents a nove...The integration of a high proportion of renewable energy introduces significant challenges for the adaptability of traditional fault nature identification methods.To address these challenges,this paper presents a novel fault nature identification method for renewable energy grid-connected interconnection lines,leveraging wavelet packet decomposition and voltage waveform time-frequency morphology comparison algorithms.First,the paper investigates the harmonic injection mechanism during non-full-phase operation following fault isolation in photovoltaic renewable energy systems,and examines the voltage characteristics of faulted phases in renewable energy scenarios.The analysis reveals that substantial differences exist in both the time and frequency domains of phase voltages before and after the extinction of transient faults,whereas permanent faults do not exhibit such variations.Building on this observation,the paper proposes a voltage time-frequency feature extraction method based on wavelet packet decomposition,wherein low-frequency waveform components are selected to characterize fault features.Subsequently,a fault nature identification method is introduced,based on a voltage waveform time-frequency morphology comparison.By employing a windowing technique to quantify waveform differences before and after arc extinction,this method effectively distinguishes between permanent and transient faults and accurately determines the arc extinction time.Finally,a 220 kV renewable energy grid connection line model is developed using PSCAD for verification.The results demonstrate that the proposed method is highly adaptable across various fault locations,transition resistances,and renewable energy control strategies,and can reliably identify fault nature in renewable energy grid connection scenarios.展开更多
Slow Slip Events(SSEs)are critical for understanding subduction zone tectonics and earthquake prediction;however their detection is challenged by low-magnitude-offsets and data gaps.To address these challenges,this pa...Slow Slip Events(SSEs)are critical for understanding subduction zone tectonics and earthquake prediction;however their detection is challenged by low-magnitude-offsets and data gaps.To address these challenges,this paper introduces an optimization-based signal decomposition(OSD)fra mework capable of automatically processing signals with missing data.We applied and validated this framework with GNSS coordinate time series in the Cascadia subduction zone,benchmarking its perfo rmance against the existing SSEs catalog.The proposed high-magnitude-offset detection method achieved an accuracy of67.21%in single-station SSE detection,significantly outperforming traditional methods such as the Relative Strength Index(RSI;32.24%)and deep learning methods like bidirectional Long Short-Term Memory(bi-LSTM;44.41%).Additionally,we proposed a complementary velocity-based screening strategy that successfully identified low-magnitude-offset SSEs and events obscured by data gaps.Through cluster analysis of single-station detection results,we successfully identified the spatiotemporal boundary of the majority of SSEs.Finally,we established an anomaly catalog for uncataloged period from 2018 to 2024,which further demonstrates the method's efficacy in characterizing the spatiotemporal features of SSEs.The OSD-based SSEs detection framework identified SSEs with diverse kinematic patterns using raw geodetic data,facilitating the construction of high-quality SSEs catalogs.These advancements enhance our understanding of subduction zone dynamics and provide a robust technical foundation for seismic hazard assessment.展开更多
The microstructural evolution of Cu−19Ni−6Cr−7Mn alloy during aging treatment was investigated.After aging for 120 min at 500℃,the alloy exhibited excellent mechanical properties,including a tensile strength of 978 M...The microstructural evolution of Cu−19Ni−6Cr−7Mn alloy during aging treatment was investigated.After aging for 120 min at 500℃,the alloy exhibited excellent mechanical properties,including a tensile strength of 978 MPa and an elastic modulus of 145.8 GPa.After aging for 240 min at 500℃,the elastic modulus of the alloy reached 149.5 GPa,which was among the highest values reported for Cu alloys.It was worth mentioning that the tensile strength increased rapidly from 740 to 934 MPa after aging for 5 min at 500℃,which was close to the maximum tensile strength(978 MPa).Analysis of the underlying strengthening mechanisms and phase transformation behavior revealed that the Cu−19Ni−6Cr−7Mn alloy underwent spinodal decomposition and DO_(22) ordering during the first 5 min of aging at 500℃,and L1_(2) ordered phases and bcc-Cr precipitates appeared.Therefore,the enhanced mechanical properties of the Cu−19Ni−6Cr−7Mn alloy can be attributed to the stress field generated by spinodal decomposition and the presence of nanoscale ordered phase and Cr precipitates.展开更多
The segmentation effect of Tsallis entropy method is superior to that of Shannon entropy method, and the computation speed of two-dimensional Shannon cross entropy method can be further improved by optimization. The e...The segmentation effect of Tsallis entropy method is superior to that of Shannon entropy method, and the computation speed of two-dimensional Shannon cross entropy method can be further improved by optimization. The existing two-dimensional Tsallis cross entropy method is not the strict two-dimensional extension. Thus two new methods of image thresholding using two-dimensional Tsallis cross entropy based on either Chaotic Particle Swarm Optimization (CPSO) or decomposition are proposed. The former uses CPSO to find the optimal threshold. The recursive algorithm is adopted to avoid the repetitive computation of fitness function in iterative procedure. The computing speed is improved greatly. The latter converts the two-dimensional computation into two one-dimensional spaces, which makes the computational complexity further reduced from O(L2) to O(L). The experimental results show that, compared with the proposed recently two-dimensional Shannon or Tsallis cross entropy method, the two new methods can achieve superior segmentation results and reduce running time greatly.展开更多
This paper discusses the signal decomposition method using the extreme-lifting scheme and two two-dimensional decomposition schemes: separable one-dimensional scheme and two-dimensional scheme with quincunx sampling. ...This paper discusses the signal decomposition method using the extreme-lifting scheme and two two-dimensional decomposition schemes: separable one-dimensional scheme and two-dimensional scheme with quincunx sampling. The structure of the relation "～" between Ex and Ey of these two schemes is symmetrical and both these two schemes have shortcomings)An unsymmetrical scheme of the extreme-lifting scheme is proposed in this paper, which canbe directly used to decompose two-dimensional image and can get better decomposition result than the two schemes with little computation cost.展开更多
This paper is concerned with establishing a reduced-order extrapolating fi- nite volume element （FVE） format based on proper orthogonal decomposition （POD） for two-dimensional （2D） hyperbolic equations. For this...This paper is concerned with establishing a reduced-order extrapolating fi- nite volume element （FVE） format based on proper orthogonal decomposition （POD） for two-dimensional （2D） hyperbolic equations. For this purpose, a semi discrete variational format relative time and a fully discrete FVE format for the 2D hyperbolic equations are built, and a set of snapshots from the very few FVE solutions are extracted on the first very short time interval. Then, the POD basis from the snapshots is formulated, and the reduced-order POD extrapolating FVE format containing very few degrees of freedom but holding sufficiently high accuracy is built. Next, the error estimates of the reduced-order solutions and the algorithm procedure for solving the reduced-order for- mat are furnished. Finally, a numerical example is shown to confirm the correctness of theoretical conclusions. This means that the format is efficient and feasible to solve the 2D hyperbolic equations.展开更多
A functional interlayer based on two-dimensional(2D)porous modified vermiculite nanosheets(PVS)was obtained by acid-etching vermiculite nanosheets.The as-obtained 2D porous nanosheets exhibited a high specific surface...A functional interlayer based on two-dimensional(2D)porous modified vermiculite nanosheets(PVS)was obtained by acid-etching vermiculite nanosheets.The as-obtained 2D porous nanosheets exhibited a high specific surface area of 427 m^(2)·g^(-1)and rich surface active sites,which help restrain polysulfides(LiPSs)through good physi-cal and chemical adsorption,while simultaneously accelerating the nucleation and dissolution kinetics of Li_(2)S,effec-tively suppressing the shuttle effect.The assembled lithium-sulfur batteries(LSBs)employing the PVS-based inter-layer delivered a high initial discharge capacity of 1386 mAh·g^(-1)at 0.1C(167.5 mAh·g^(-1)),long-term cycling stabil-ity,and good rate property.展开更多
The proliferation of wearable biodevices has boosted the development of soft,innovative,and multifunctional materials for human health monitoring.The integration of wearable sensors with intelligent systems is an over...The proliferation of wearable biodevices has boosted the development of soft,innovative,and multifunctional materials for human health monitoring.The integration of wearable sensors with intelligent systems is an overwhelming tendency,providing powerful tools for remote health monitoring and personal health management.Among many candidates,two-dimensional(2D)materials stand out due to several exotic mechanical,electrical,optical,and chemical properties that can be efficiently integrated into atomic-thin films.While previous reviews on 2D materials for biodevices primarily focus on conventional configurations and materials like graphene,the rapid development of new 2D materials with exotic properties has opened up novel applications,particularly in smart interaction and integrated functionalities.This review aims to consolidate recent progress,highlight the unique advantages of 2D materials,and guide future research by discussing existing challenges and opportunities in applying 2D materials for smart wearable biodevices.We begin with an in-depth analysis of the advantages,sensing mechanisms,and potential applications of 2D materials in wearable biodevice fabrication.Following this,we systematically discuss state-of-the-art biodevices based on 2D materials for monitoring various physiological signals within the human body.Special attention is given to showcasing the integration of multi-functionality in 2D smart devices,mainly including self-power supply,integrated diagnosis/treatment,and human–machine interaction.Finally,the review concludes with a concise summary of existing challenges and prospective solutions concerning the utilization of2D materials for advanced biodevices.展开更多
The surface transfer doping model has been extensively adopted as a mechanism to account for the generation of hole accumulation layers below hydrogen-terminated diamond(H-diamond)surfaces.To achieve effective surface...The surface transfer doping model has been extensively adopted as a mechanism to account for the generation of hole accumulation layers below hydrogen-terminated diamond(H-diamond)surfaces.To achieve effective surface transfer doping,surface electron acceptor materials with high electron affinity(EA)are required to produce a high density of two-dimensional hole gas(2DHG)on the H-diamond subsurface.We have established ingenious theoretical models to demonstrate that even if these solid materials do not have a high EA value,they remain capable of absorbing electrons from the H-diamond surface by forming a negatively charged interface to act as a surface electron acceptor in the surface transfer doping model.Our calculations,particularly for the local density of states,provide compelling evidence that the effect of an interface with negative charges induces an upward band bending on the H-diamond side.Furthermore,the valence band maximum of the diamond atoms at the interface crosses the Fermi level,giving rise to strong surface transfer p-type doping.These results give a strong theoretical interpretation of the origin of 2DHG on H-diamond surfaces.The proposed guidelines contribute to further improvements in the performance of 2DHG H-diamond field effect transistors.展开更多
The deployment of non-precious metal catalysts for the production of COx-free hydrogen via the ammonia decomposition reaction(ADR)presents a promising yet great challenge.In the present study,two crystal structures of...The deployment of non-precious metal catalysts for the production of COx-free hydrogen via the ammonia decomposition reaction(ADR)presents a promising yet great challenge.In the present study,two crystal structures of α-MoC and β-Mo_(2)C catalysts with different Mo/C ratios were synthesized,and their ammonia decomposition performance as well as structural evolution in ADR was investigated.The β-Mo_(2)C catalyst,characterized by a higher Mo/C ratio,demonstrated a remarkable turnover frequency of 1.3 s^(-1),which is over tenfold higher than that ofα-MoC(0.1 s^(-1)).An increase in the Mo/C ratio of molybdenum carbide revealed a direct correlation between the surface Mo/C ratio and the hydrogen yield.The transient response surface reaction indicated that the combination of N*and N*derived from NH_(3) dissociation represents the rate-determining step in the ADR,andβ-Mo2C exhibited exceptional proficiency in facilitating this pivotal step.Concurrently,the accumulation of N*species on the carbide surface could induce the phase transition of molybdenum carbide to nitride,which follows a topological transformation.It is discovered that such phase evolution was affected by the Mo-C surface and reaction temperature simultaneously.When the kinetics of combination of N*was accelerated by rising temperatures and its accumulation on the carbide surface was mitigated,β-Mo_(2)C maintained its carbide phase,preventing nitridation during the ADR at 810℃.Our results contribute to an in-depth understanding of the molybdenum carbides’catalytic properties in ADR and highlight the nature of the carbide-nitride phase transition in the reaction.展开更多
文摘The two-dimensional grating serves as a critical component in plane grating interferometers for achieving high-precision multidimensional displacement measurements.The calibration of grating groove density and orthogonality error of grating grooves not only improves the positioning accuracy of grating interferometers but also provides essential feedback for optimizing two-dimensional grating fabrication.This study proposes a method for simultaneous calibration of these parameters using orthogonal heterodyne laser interferometry.A two-dimensional grating interferometer is built with the grating to be measured,and a biaxial laser interferometer provides a displacement reference for it.The phase mapping relationship between grating interference and laser interference is established.The interference phase information obtained by any two displacements can simultaneously solve the above three parameters and obtain the grating installation error.The feasibility of the proposed method is verified by using a 1200 gr/mm two-dimensional grating.The standard deviation of the grating groove density in the X and Y directions is 0.012 gr/mm and 0.014 gr/mm,respectively.The standard deviation of the orthogonality error of grating grooves is 0.004°,and the standard deviation of the installation error is 0.002°.Compared with the atomic force microscope method,the consistency of the grating groove density in the X and Y directions is better than 0.03 gr/mm and 0.06 gr/mm,and the orthogonality error of grating grooves is better than 0.008°.The experimental results show that the proposed method can be simply and efficiently applied to the calibration of the grating line parameters of the two-dimensional grating.
基金Supported by Innovative Research Groups of the National Natural Science Foundation of China(22021004)。
文摘Catalytic decomposition of methane,which produces high-purity hydrogen and high-value-added carbon nanomaterials,has shown considerable potential for development and is expected to yield significant economic benefits in the future.However,designing catalysts that simultaneously exhibit high activity and long-term stability remains a significant challenge.Tuning the catalyst’s structure and electronic properties is an effective strategy for enhancing the reaction performance.In this work,a series of NixZr/ZSM-5 catalysts were prepared using the incipient wetness impregnation method,and the effect of Zr loadings on catalyst properties and performance was systematically investigated.The calcined and reduced catalysts were characterized by low-temperature N_(2)adsorption-desorption,XRD,SEM,H_(2)-TPR and XPS.The results showed that the addition of Zr significantly increased the specific surface area of the catalyst and reduced the metal particle size.Smaller NiO particles were found to enter the pores of the HZSM-5 support,and electronic interactions between NiO and ZrO_(2)markedly enhanced the metal-support interaction.The catalyst exhibited optimal catalytic performance at a Zr loading of 5%,achieving a maximum methane conversion of 68%at 625℃,maintaining activity for 900 min,and delivering a carbon yield of 1927%.Further increasing the Zr loading yielded only limited improvements in catalytic performance.Characterization of the spent catalysts and carbon products via TEM,Raman spectroscopy,and TGA revealed that the introduction of ZrO_(2)reduced metal sintering and promoted a shift in carbon nanofibers growth mode from tip-growth to base-growth.The mechanism of base-growth enabled the catalyst to maintain reaction activity for an extended period.
基金sponsored by the Department of Defense,Defense Threat Reduction Agency under the Materials Science in Extreme Environments University Research Alliance,HDTRA1-20-2-0001。
文摘Chemical warfare agents(CWAs)remain a persistent hazard in many parts of the world,necessitating a deeper exploration of their chemical and physical characteristics and reactions under diverse conditions.Diisopropyl methylphosphonate(DIMP),a commonly used CWA surrogate,is widely studied to enhance our understanding of CWA behavior.The prevailing thermal decomposition model for DIMP,developed approximately 25 years ago,is based on data collected in nitrogen atmospheres at temperatures ranging from 700 K to 800 K.Despite its limitations,this model continues to serve as a foundation for research across various thermal and reactive environments,including combustion studies.Our recent experiments have extended the scope of decomposition analysis by examining DIMP in both nitrogen and zero air across a lower temperature range of 175℃ to 250℃.Infrared spectroscopy results under nitrogen align well with the established model;however,we observed that catalytic effects,stemming from decomposition byproducts and interactions with stainless steel surfaces,alter the reaction kinetics.In zero air environments,we observed a novel infrared absorption band.Spectral fitting suggests this band may represent a combination of propanal and acetone,while GCMS analysis points to vinyl formate and acetone as possible constituents.Although the precise identity of these new products remains unresolved,our findings clearly indicate that the existing decomposition model cannot be reliably extended to lower temperatures or non-nitrogen environments without further revisions.
基金supported by the NSFC(12474071)Natural Science Foundation of Shandong Province(ZR2024YQ051,ZR2025QB50)+6 种基金Guangdong Basic and Applied Basic Research Foundation(2025A1515011191)the Shanghai Sailing Program(23YF1402200,23YF1402400)funded by Basic Research Program of Jiangsu(BK20240424)Open Research Fund of State Key Laboratory of Crystal Materials(KF2406)Taishan Scholar Foundation of Shandong Province(tsqn202408006,tsqn202507058)Young Talent of Lifting engineering for Science and Technology in Shandong,China(SDAST2024QTB002)the Qilu Young Scholar Program of Shandong University。
文摘As emerging two-dimensional(2D)materials,carbides and nitrides(MXenes)could be solid solutions or organized structures made up of multi-atomic layers.With remarkable and adjustable electrical,optical,mechanical,and electrochemical characteristics,MXenes have shown great potential in brain-inspired neuromorphic computing electronics,including neuromorphic gas sensors,pressure sensors and photodetectors.This paper provides a forward-looking review of the research progress regarding MXenes in the neuromorphic sensing domain and discussed the critical challenges that need to be resolved.Key bottlenecks such as insufficient long-term stability under environmental exposure,high costs,scalability limitations in large-scale production,and mechanical mismatch in wearable integration hinder their practical deployment.Furthermore,unresolved issues like interfacial compatibility in heterostructures and energy inefficiency in neu-romorphic signal conversion demand urgent attention.The review offers insights into future research directions enhance the fundamental understanding of MXene properties and promote further integration into neuromorphic computing applications through the convergence with various emerging technologies.
基金financially supported by the National Natural Science Foundation of China(Nos.52034002 and U2202254)the Fundamental Research Funds for the Central Universities,China(No.FRF-TT-19-001)。
文摘The sulfation and decomposition process has proven effective in selectively extracting lithium from lepidolite.It is essential to clarify the thermochemical behavior and kinetic parameters of decomposition reactions.Accordingly,comprehensive kinetic study by employing thermalgravimetric analysis at various heating rates was presented in this paper.Two main weight loss regions were observed during heating.The initial region corresponded to the dehydration of crystal water,whereas the subsequent region with overlapping peaks involved complex decomposition reactions.The overlapping peaks were separated into two individual reaction peaks and the activation energy of each peak was calculated using isoconversional kinetics methods.The activation energy of peak 1 exhibited a continual increase as the reaction conversion progressed,while that of peak 2 steadily decreased.The optimal kinetic models,identified as belonging to the random nucleation and subsequent growth category,provided valuable insights into the mechanism of the decomposition reactions.Furthermore,the adjustment factor was introduced to reconstruct the kinetic mechanism models,and the reconstructed models described the kinetic mechanism model more accurately for the decomposition reactions.This study enhanced the understanding of the thermochemical behavior and kinetic parameters of the lepidolite sulfation product decomposition reactions,further providing theoretical basis for promoting the selective extraction of lithium.
基金supported by the Fundamental Research Funds for the Central Universities(WUT:2024IVA052 and Grant No.104972025KFYjc0089)。
文摘Two-dimensional(2D)multilayer kagome materials hold significant research value for regulating kagome-related physical properties and exploring quantum effects.However,their development is hindered by the scarcity of available material systems,making the identification of novel 2D multilayer kagome candidates particularly important.In this work,three types of 2D materials with trilayer kagome lattices,namely Sc_(6)S_(5)X_(6)(X=Cl,Br,I),are predicted based on first-principles calculations.These 2D materials feature two kagome lattices composed of Sc atoms and one kagome lattice composed of S atoms.Stability analysis indicates that these materials can exist as free-standing 2D materials.Electronic structure calculations reveal that Sc_(6)S_(5)X_(6)are narrow-bandgap semiconductors(0.76–0.95 e V),with their band structures exhibiting flat bands contributed by Sc-based kagome lattices and Dirac band gaps resulting from symmetry breaking.The sulfur-based kagome lattice in the central layer contributes an independent flat band below the Fermi level.Additionally,Sc_(6)S_(5)X_(6)exhibit high carrier mobility,with hole and electron mobilities reaching up to 10^(3)cm^(2)·V^(-1)·s^(-1),indicating potential applications in low-dimensional electronic devices.This work provides an excellent example for the development of novel multilayer 2D kagome materials.
基金funded by Anhui Province University Key Science and Technology Project(2024AH053415)Anhui Province University Major Science and Technology Project(2024AH040229)+3 种基金Talent Research Initiation Fund Project of Tongling University(2024tlxyrc019)Tongling University School-Level Scientific Research Project(2024tlxyptZD07)TheUniversity Synergy Innovation Programof Anhui Province(GXXT-2023-050)Tongling City Science and Technology Major Special Project(Unveiling and Commanding Model)(200401JB004).
文摘In the image fusion field,fusing infrared images(IRIs)and visible images(VIs)excelled is a key area.The differences between IRIs and VIs make it challenging to fuse both types into a high-quality image.Accordingly,efficiently combining the advantages of both images while overcoming their shortcomings is necessary.To handle this challenge,we developed an end-to-end IRI andVI fusionmethod based on frequency decomposition and enhancement.By applying concepts from frequency domain analysis,we used the layering mechanism to better capture the salient thermal targets from the IRIs and the rich textural information from the VIs,respectively,significantly boosting the image fusion quality and effectiveness.In addition,the backbone network combined Restormer Blocks and Dense Blocks;Restormer blocks utilize global attention to extract shallow features.Meanwhile,Dense Blocks ensure the integration between shallow and deep features,thereby avoiding the loss of shallow attributes.Extensive experiments on TNO and MSRS datasets demonstrated that the suggested method achieved state-of-the-art(SOTA)performance in various metrics:Entropy(EN),Mutual Information(MI),Standard Deviation(SD),The Structural Similarity Index Measure(SSIM),Fusion quality(Qabf),MI of the pixel(FMI_(pixel)),and modified Visual Information Fidelity(VIF_(m)).
基金supported by the Universidad del Rosario(Small grant ID:IV-FPD003)。
文摘Upper Andean tropical forests are renowned for their extraordinary biodiversity and heterogeneous environmental conditions.Despite the critical role of litter decomposition in carbon and nutrient cycles,its dynamics in this region remains unexplored at finer scales.This study investigates how micro site conditions influence litter decomposition of 15 upper Andean species over time.A reciprocal translocation field experiment was conducted over 18 months in 14 permanent plots within four sites in Colombian Andean mountain forests.Each plot contained three litterbeds(microsites),each with the 15 species,harvested at 3,6,12 and 18 months,totaling 2520 litterbags.Different forest variables,including canopy openness,leaf area index,slope and depth of litter,were measured in each litterbed.ANOVAs and linear mixed models were used to assess variation between sites and plots respectively,while multiple linear regression analyses evaluated the effects of forest variables on decay rates over time at the micro site scale.Results showed differences in absolute decay rates between sites but consistent relative decay rates,indicating varying magnitudes of decomposition,yet maintaining the same order based on their litter quality.Decay rates varied between species,with more variation in labile species compared to recalcitrant ones.Despite substantial variation in forest characteristics within sites,their influence on litter decomposition was minimal and declined over time.This suggests that,at finer spatial scales,the forest microenvironment plays a lesser role in litter decomposition,with litter quality emerging as the primary driver.This study is a step towards understanding the fine-scale dynamics of litter decomposition in upper Andean tropical forests,highlighting the intricate interplay between microenvironmental factors and decomposition processes.
基金funded by the Global PhD Scholarship between KU Leuven and UCLouvain。
文摘Litter decomposition is an essential ecosystem process influenced by multiple factors,including substrate quality,climate,edaphic environment,and decomposer communities.However,the role of canopy species identity and diversity on leaf litter decomposition in forests remains understudied.By controlling for macroclimate,soil properties,and litter substrate in a mature common garden,we investigated whether a three-month tea bag incubation of standardized green and rooibos tea substrate is driven by canopy tree species characteristics and diversity.Our study hypothesized two primary pathways:a chemical engineering effect,where trees alter soil properties and decomposer communities through litter input,and a physical engineering effect,where tree canopy structure modulates the local microclimate.The results showed that even under uniform macroclimatic and initial soil conditions,mass loss rates varied widely for green tea(27.4%–73.2%)and rooibos tea(6.1%–34.7%),comparable as found in other research between distinct biomes.While substrate quality was the dominant factor,both engineering pathways and,to a minor extent,tree diversity modulated mass losses.For green tea,tree chemical and physical characteristics seemed equally important,while the physical environment showed an increased importance for rooibos.Incubation depth played a key role,where forest floor decomposition rates are more susceptible to temporal climate variations,and soil-layer decomposition rates are less susceptible to climate variations and more determined by tree species identity.Our findings suggest that tea bag experiments focusing solely on topsoil burial may underestimate processes in the forest floor and the mineralorganic boundary layer.This study underscores the critical role of litter substrate quality in decomposition while demonstrating that tree community composition and the associated herbaceous layer,through both chemical and physical engineering pathways,strongly modulate decomposition rates.
基金supported by the National Natural Science Foundation of China(No.22278439 and 21776313).
文摘Renewable electricity-driven production of value-added sulfur and H_(2)via electrocatalytic H_(2)S decomposition represents a sustainable route to conventional thermocatalysis.Both the electrocatalyst and electrolyte solution strongly impact the H_(2)S decomposition performance.Despite significant progress in developing sophisticated electrocatalysts,a well-designed electrolyte solution in conjunction with industrial catalysts is an attractive strategy to advance the industrialization process of electrocatalytic H_(2)S decomposition,but remains unexplored.Here,for the first time,we design a solid-liquid-gas three-phase indirect electrolysis system based on a kind of CS_(2)-N electrolyte solution and Ni-Mo_(2)C that can efficiently enable H_(2)S decomposition into valuable H_(2)and sulfur.Specifically,the solid-phase Ni-Mo_(2)C as a heterogeneous redox mediator presents excellent electrocatalytic efficiency for the H_(2)S removal efficiency of up to 99%,and the formation of liquid-phase sulfur product(CS_(2)-N electrolyte solution dissolves sulfur,yield up to 95%)with the generation of gas-phase H_(2)product(~1.32 mL min^(-1)),resulting in an interesting three-phase indirect electrolysis system.Remarkably,it enables the scale-up production(~6 g in a batch experiment)of sulfur with continuous operation for 120 h without attenuation.This work may inaugurate a new electrocatalytic H_(2)S decomposition avenue to explore porous metal materials and electrolyte systems in simultaneous production of value-added sulfur and H_(2).
基金supported by State Grid Sichuan Electric Power Company science and technology project“Research on Key Technologies for Reclosing of High-Ratio New Energy Grid Connection Lines.”(Program No:52199723002Q).
文摘The integration of a high proportion of renewable energy introduces significant challenges for the adaptability of traditional fault nature identification methods.To address these challenges,this paper presents a novel fault nature identification method for renewable energy grid-connected interconnection lines,leveraging wavelet packet decomposition and voltage waveform time-frequency morphology comparison algorithms.First,the paper investigates the harmonic injection mechanism during non-full-phase operation following fault isolation in photovoltaic renewable energy systems,and examines the voltage characteristics of faulted phases in renewable energy scenarios.The analysis reveals that substantial differences exist in both the time and frequency domains of phase voltages before and after the extinction of transient faults,whereas permanent faults do not exhibit such variations.Building on this observation,the paper proposes a voltage time-frequency feature extraction method based on wavelet packet decomposition,wherein low-frequency waveform components are selected to characterize fault features.Subsequently,a fault nature identification method is introduced,based on a voltage waveform time-frequency morphology comparison.By employing a windowing technique to quantify waveform differences before and after arc extinction,this method effectively distinguishes between permanent and transient faults and accurately determines the arc extinction time.Finally,a 220 kV renewable energy grid connection line model is developed using PSCAD for verification.The results demonstrate that the proposed method is highly adaptable across various fault locations,transition resistances,and renewable energy control strategies,and can reliably identify fault nature in renewable energy grid connection scenarios.
基金supported by the National Natural Science Foundation of China(Grant No.42274035)the Major Program(JD)of Hubei Province(Grant No.2023BAA026)the Hunan Provincial Land Surveying and Mapping Project(HNGTCH-2023-05)。
文摘Slow Slip Events(SSEs)are critical for understanding subduction zone tectonics and earthquake prediction;however their detection is challenged by low-magnitude-offsets and data gaps.To address these challenges,this paper introduces an optimization-based signal decomposition(OSD)fra mework capable of automatically processing signals with missing data.We applied and validated this framework with GNSS coordinate time series in the Cascadia subduction zone,benchmarking its perfo rmance against the existing SSEs catalog.The proposed high-magnitude-offset detection method achieved an accuracy of67.21%in single-station SSE detection,significantly outperforming traditional methods such as the Relative Strength Index(RSI;32.24%)and deep learning methods like bidirectional Long Short-Term Memory(bi-LSTM;44.41%).Additionally,we proposed a complementary velocity-based screening strategy that successfully identified low-magnitude-offset SSEs and events obscured by data gaps.Through cluster analysis of single-station detection results,we successfully identified the spatiotemporal boundary of the majority of SSEs.Finally,we established an anomaly catalog for uncataloged period from 2018 to 2024,which further demonstrates the method's efficacy in characterizing the spatiotemporal features of SSEs.The OSD-based SSEs detection framework identified SSEs with diverse kinematic patterns using raw geodetic data,facilitating the construction of high-quality SSEs catalogs.These advancements enhance our understanding of subduction zone dynamics and provide a robust technical foundation for seismic hazard assessment.
基金supported by the National Key R&D Program of China (No. 2021YFB3700700)the Henan Province Top Talent Training Program Project, China (No. 244500510020)the High-level Talent Research Start-up Project Funding of Henan Academy of Sciences, China (No. 242017001)。
文摘The microstructural evolution of Cu−19Ni−6Cr−7Mn alloy during aging treatment was investigated.After aging for 120 min at 500℃,the alloy exhibited excellent mechanical properties,including a tensile strength of 978 MPa and an elastic modulus of 145.8 GPa.After aging for 240 min at 500℃,the elastic modulus of the alloy reached 149.5 GPa,which was among the highest values reported for Cu alloys.It was worth mentioning that the tensile strength increased rapidly from 740 to 934 MPa after aging for 5 min at 500℃,which was close to the maximum tensile strength(978 MPa).Analysis of the underlying strengthening mechanisms and phase transformation behavior revealed that the Cu−19Ni−6Cr−7Mn alloy underwent spinodal decomposition and DO_(22) ordering during the first 5 min of aging at 500℃,and L1_(2) ordered phases and bcc-Cr precipitates appeared.Therefore,the enhanced mechanical properties of the Cu−19Ni−6Cr−7Mn alloy can be attributed to the stress field generated by spinodal decomposition and the presence of nanoscale ordered phase and Cr precipitates.
基金supported by National Natural Science Foundation of China under Grant No.60872065Open Foundation of State Key Laboratory for Novel Software Technology at Nanjing University under Grant No.KFKT2010B17
文摘The segmentation effect of Tsallis entropy method is superior to that of Shannon entropy method, and the computation speed of two-dimensional Shannon cross entropy method can be further improved by optimization. The existing two-dimensional Tsallis cross entropy method is not the strict two-dimensional extension. Thus two new methods of image thresholding using two-dimensional Tsallis cross entropy based on either Chaotic Particle Swarm Optimization (CPSO) or decomposition are proposed. The former uses CPSO to find the optimal threshold. The recursive algorithm is adopted to avoid the repetitive computation of fitness function in iterative procedure. The computing speed is improved greatly. The latter converts the two-dimensional computation into two one-dimensional spaces, which makes the computational complexity further reduced from O(L2) to O(L). The experimental results show that, compared with the proposed recently two-dimensional Shannon or Tsallis cross entropy method, the two new methods can achieve superior segmentation results and reduce running time greatly.
文摘This paper discusses the signal decomposition method using the extreme-lifting scheme and two two-dimensional decomposition schemes: separable one-dimensional scheme and two-dimensional scheme with quincunx sampling. The structure of the relation "～" between Ex and Ey of these two schemes is symmetrical and both these two schemes have shortcomings)An unsymmetrical scheme of the extreme-lifting scheme is proposed in this paper, which canbe directly used to decompose two-dimensional image and can get better decomposition result than the two schemes with little computation cost.
基金Project supported by the National Natural Science Foundation of China(Nos.11271127 and11671106)
文摘This paper is concerned with establishing a reduced-order extrapolating fi- nite volume element （FVE） format based on proper orthogonal decomposition （POD） for two-dimensional （2D） hyperbolic equations. For this purpose, a semi discrete variational format relative time and a fully discrete FVE format for the 2D hyperbolic equations are built, and a set of snapshots from the very few FVE solutions are extracted on the first very short time interval. Then, the POD basis from the snapshots is formulated, and the reduced-order POD extrapolating FVE format containing very few degrees of freedom but holding sufficiently high accuracy is built. Next, the error estimates of the reduced-order solutions and the algorithm procedure for solving the reduced-order for- mat are furnished. Finally, a numerical example is shown to confirm the correctness of theoretical conclusions. This means that the format is efficient and feasible to solve the 2D hyperbolic equations.
文摘A functional interlayer based on two-dimensional(2D)porous modified vermiculite nanosheets(PVS)was obtained by acid-etching vermiculite nanosheets.The as-obtained 2D porous nanosheets exhibited a high specific surface area of 427 m^(2)·g^(-1)and rich surface active sites,which help restrain polysulfides(LiPSs)through good physi-cal and chemical adsorption,while simultaneously accelerating the nucleation and dissolution kinetics of Li_(2)S,effec-tively suppressing the shuttle effect.The assembled lithium-sulfur batteries(LSBs)employing the PVS-based inter-layer delivered a high initial discharge capacity of 1386 mAh·g^(-1)at 0.1C(167.5 mAh·g^(-1)),long-term cycling stabil-ity,and good rate property.
基金the support from the National Natural Science Foundation of China(22272004,62272041)the Fundamental Research Funds for the Central Universities(YWF-22-L-1256)+1 种基金the National Key R&D Program of China(2023YFC3402600)the Beijing Institute of Technology Research Fund Program for Young Scholars(No.1870011182126)。
文摘The proliferation of wearable biodevices has boosted the development of soft,innovative,and multifunctional materials for human health monitoring.The integration of wearable sensors with intelligent systems is an overwhelming tendency,providing powerful tools for remote health monitoring and personal health management.Among many candidates,two-dimensional(2D)materials stand out due to several exotic mechanical,electrical,optical,and chemical properties that can be efficiently integrated into atomic-thin films.While previous reviews on 2D materials for biodevices primarily focus on conventional configurations and materials like graphene,the rapid development of new 2D materials with exotic properties has opened up novel applications,particularly in smart interaction and integrated functionalities.This review aims to consolidate recent progress,highlight the unique advantages of 2D materials,and guide future research by discussing existing challenges and opportunities in applying 2D materials for smart wearable biodevices.We begin with an in-depth analysis of the advantages,sensing mechanisms,and potential applications of 2D materials in wearable biodevice fabrication.Following this,we systematically discuss state-of-the-art biodevices based on 2D materials for monitoring various physiological signals within the human body.Special attention is given to showcasing the integration of multi-functionality in 2D smart devices,mainly including self-power supply,integrated diagnosis/treatment,and human–machine interaction.Finally,the review concludes with a concise summary of existing challenges and prospective solutions concerning the utilization of2D materials for advanced biodevices.
基金supported by the National Nat-ural Science Foundation of China(Nos.62174122,U2241244,and 52302046)Major Program(JD)of Hubei Province(No.2023BAA008)+2 种基金the Fundamental Research Funds for the Central Universities(Nos.2042023kf0116 and 2042023kf1041)the Guangdong Basic and Applied Basic Research Foundation(Nos.2024A1515011764 and 2024A1515010383)the Open Fund of Hubei Key Laboratory of Electronic Manufacturing and Packaging Integration(Wuhan University)(No.EMPI2023016).
文摘The surface transfer doping model has been extensively adopted as a mechanism to account for the generation of hole accumulation layers below hydrogen-terminated diamond(H-diamond)surfaces.To achieve effective surface transfer doping,surface electron acceptor materials with high electron affinity(EA)are required to produce a high density of two-dimensional hole gas(2DHG)on the H-diamond subsurface.We have established ingenious theoretical models to demonstrate that even if these solid materials do not have a high EA value,they remain capable of absorbing electrons from the H-diamond surface by forming a negatively charged interface to act as a surface electron acceptor in the surface transfer doping model.Our calculations,particularly for the local density of states,provide compelling evidence that the effect of an interface with negative charges induces an upward band bending on the H-diamond side.Furthermore,the valence band maximum of the diamond atoms at the interface crosses the Fermi level,giving rise to strong surface transfer p-type doping.These results give a strong theoretical interpretation of the origin of 2DHG on H-diamond surfaces.The proposed guidelines contribute to further improvements in the performance of 2DHG H-diamond field effect transistors.
文摘The deployment of non-precious metal catalysts for the production of COx-free hydrogen via the ammonia decomposition reaction(ADR)presents a promising yet great challenge.In the present study,two crystal structures of α-MoC and β-Mo_(2)C catalysts with different Mo/C ratios were synthesized,and their ammonia decomposition performance as well as structural evolution in ADR was investigated.The β-Mo_(2)C catalyst,characterized by a higher Mo/C ratio,demonstrated a remarkable turnover frequency of 1.3 s^(-1),which is over tenfold higher than that ofα-MoC(0.1 s^(-1)).An increase in the Mo/C ratio of molybdenum carbide revealed a direct correlation between the surface Mo/C ratio and the hydrogen yield.The transient response surface reaction indicated that the combination of N*and N*derived from NH_(3) dissociation represents the rate-determining step in the ADR,andβ-Mo2C exhibited exceptional proficiency in facilitating this pivotal step.Concurrently,the accumulation of N*species on the carbide surface could induce the phase transition of molybdenum carbide to nitride,which follows a topological transformation.It is discovered that such phase evolution was affected by the Mo-C surface and reaction temperature simultaneously.When the kinetics of combination of N*was accelerated by rising temperatures and its accumulation on the carbide surface was mitigated,β-Mo_(2)C maintained its carbide phase,preventing nitridation during the ADR at 810℃.Our results contribute to an in-depth understanding of the molybdenum carbides’catalytic properties in ADR and highlight the nature of the carbide-nitride phase transition in the reaction.
