The effect of an adsorbed anionic surfactant sodium dodecyl benzene sulfonate （SDBS） on electron transfer （ET） reaction between ferricyanide aqueous solution and decamethylferrocene （DMFc） located on the adjacen...The effect of an adsorbed anionic surfactant sodium dodecyl benzene sulfonate （SDBS） on electron transfer （ET） reaction between ferricyanide aqueous solution and decamethylferrocene （DMFc） located on the adjacent organic phase was investigated for the first time by thin layer method. The adsorption of SDBS at the interface resulted in a decay in the cathodic plateau current of bimolecular reaction with increasing concentrations of SDBS in aqueous phase. However, the rate constant of electron transfer （ket） increased monotonically as the SDBS concentrations increased from 0 to 200 p, moFL. The experimental results showed that SDBS formed patches on the interface and influenced the structure of electrical double layer. 2009 Xiao Quan Lu. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.展开更多
Thin-walled parts have low stiffness characteristic. Initial residual stress of thin-walled blanks is an important influence factor on machining stability. The present work is to verify the feasibility of an initial r...Thin-walled parts have low stiffness characteristic. Initial residual stress of thin-walled blanks is an important influence factor on machining stability. The present work is to verify the feasibility of an initial residual stress measurement of layer removal method. According to initial residual stress experiment for casting ZL205 A aluminum alloy tapered thin-walled blank by a common method,namely hole-drilling method,three finite element models with initial residual stress are established to simulate the layer removal method in ABAQUS and ANSYS software. By analyzing the results of simulation and experiments,the cutting residual stress inlayer removal process has a significant effect on measurement results. Reducing cutting residual stress is helpful to improve accuracy of layer removal method.展开更多
The study of wave propagation in finite/infinite media has many applications in geotechnical and structural earthquake engineering and has been a focus of research for the past few decades. This paper presents an anal...The study of wave propagation in finite/infinite media has many applications in geotechnical and structural earthquake engineering and has been a focus of research for the past few decades. This paper presents an analysis of 2D anti- plane problems （Love waves） and 2D in-plane problems （Rayleigh waves） in the frequency domain in media consisting of a near-field irregular and a far-field regular part. The near field part may contain structures and its boundaries with the far-field can be of any shape. In this study, the irregular boundaries of the near-field are treated as consistent boundaries, extending the concept of Lysmer＇s vertical consistent boundaries. The presented technique is called the Condensed Hyperelements Method （CHM）. In this method, the irregular boundary is limited to a vertical boundary at each end that is a consistent boundary at the far-field side. Between the two ends, the medium is discretized with hyperelements. Using static condensation, the stiffness matrix of the far-field is derived for the nodes on the irregular boundary. Examples of the application of the CHM illustrate its excellent accuracy and efficiency.展开更多
In recent years, there has been a growing interest in researching and developing new antimicrobial agents from various sources to combat microbial resistance. Therefore, a greater attention has been paid to antimicrob...In recent years, there has been a growing interest in researching and developing new antimicrobial agents from various sources to combat microbial resistance. Therefore, a greater attention has been paid to antimicrobial activity screening and evaluating methods. Several bioassays such as disk-diffusion, well diffusion and broth or agar dilution are well known and commonly used, but others such as flow cy- tofluorometric and bioluminescent methods are not widely used because they require specified equip- ment and further evaluation for reproducibility and standardization, even if they can provide rapid re- sults of the antimicrobial agent＇s effects and a better understanding of their impact on the viability and cell damage inflicted to the tested microorganism. In this review article, an exhaustive list of in vitro antimicrobial susceptibility testing methods and detailed information on their advantages and limita- tions are reported.展开更多
In the present study, vibration analysis of a three-layered cylindrical shell is performed whose inner and outer layers are composed of functionally graded materials whereas the middle one is assumed to be of isotropi...In the present study, vibration analysis of a three-layered cylindrical shell is performed whose inner and outer layers are composed of functionally graded materials whereas the middle one is assumed to be of isotropic material. This formation of a cylindrical shell influences stiffness modulii and the resultant material properties. The shell problem is formulated from the constitutive relations of stresses and strains with the displacement deformations and they are taken from Love’s thin shell theory. This problem is transformed into the integral form by evaluating the expressions for the strain and kinetic energies of the shell. Rayleigh-Ritz method is employed to solve the shell dynamic equations. Vibration characteristics of these cylindrical shells are investigated for a number of physical parameters and configurations of the fabrication of shells. The axial modal dependence is approximated by the characteristic beam functions that satisfy the boundary conditions. Results evaluated, show good agreement with the open literature.展开更多
基金supported by the National Science Foundation of China(No.20775060 and No.20875077)the National Science Foundation of Gansu(No.0701RJZA109 and No.0803RJZA105)and the Key Laboratory of Polymer Materials of Gansu Province
文摘The effect of an adsorbed anionic surfactant sodium dodecyl benzene sulfonate （SDBS） on electron transfer （ET） reaction between ferricyanide aqueous solution and decamethylferrocene （DMFc） located on the adjacent organic phase was investigated for the first time by thin layer method. The adsorption of SDBS at the interface resulted in a decay in the cathodic plateau current of bimolecular reaction with increasing concentrations of SDBS in aqueous phase. However, the rate constant of electron transfer （ket） increased monotonically as the SDBS concentrations increased from 0 to 200 p, moFL. The experimental results showed that SDBS formed patches on the interface and influenced the structure of electrical double layer. 2009 Xiao Quan Lu. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.
基金Supported by the National Natural Science Foundation of China(No.51575014,51505012)Natural Science Foundation of Beijing(No.3154029,KZ201410005010)+2 种基金National Defense Scientific Research Project(No.JCKY2014204B003)Project funded by China Postdoctoral Science Foundation(No.2016M591033)Beijing Postdoctoral Research Foundation(No.2015ZZ-13)
文摘Thin-walled parts have low stiffness characteristic. Initial residual stress of thin-walled blanks is an important influence factor on machining stability. The present work is to verify the feasibility of an initial residual stress measurement of layer removal method. According to initial residual stress experiment for casting ZL205 A aluminum alloy tapered thin-walled blank by a common method,namely hole-drilling method,three finite element models with initial residual stress are established to simulate the layer removal method in ABAQUS and ANSYS software. By analyzing the results of simulation and experiments,the cutting residual stress inlayer removal process has a significant effect on measurement results. Reducing cutting residual stress is helpful to improve accuracy of layer removal method.
文摘The study of wave propagation in finite/infinite media has many applications in geotechnical and structural earthquake engineering and has been a focus of research for the past few decades. This paper presents an analysis of 2D anti- plane problems （Love waves） and 2D in-plane problems （Rayleigh waves） in the frequency domain in media consisting of a near-field irregular and a far-field regular part. The near field part may contain structures and its boundaries with the far-field can be of any shape. In this study, the irregular boundaries of the near-field are treated as consistent boundaries, extending the concept of Lysmer＇s vertical consistent boundaries. The presented technique is called the Condensed Hyperelements Method （CHM）. In this method, the irregular boundary is limited to a vertical boundary at each end that is a consistent boundary at the far-field side. Between the two ends, the medium is discretized with hyperelements. Using static condensation, the stiffness matrix of the far-field is derived for the nodes on the irregular boundary. Examples of the application of the CHM illustrate its excellent accuracy and efficiency.
文摘In recent years, there has been a growing interest in researching and developing new antimicrobial agents from various sources to combat microbial resistance. Therefore, a greater attention has been paid to antimicrobial activity screening and evaluating methods. Several bioassays such as disk-diffusion, well diffusion and broth or agar dilution are well known and commonly used, but others such as flow cy- tofluorometric and bioluminescent methods are not widely used because they require specified equip- ment and further evaluation for reproducibility and standardization, even if they can provide rapid re- sults of the antimicrobial agent＇s effects and a better understanding of their impact on the viability and cell damage inflicted to the tested microorganism. In this review article, an exhaustive list of in vitro antimicrobial susceptibility testing methods and detailed information on their advantages and limita- tions are reported.
文摘In the present study, vibration analysis of a three-layered cylindrical shell is performed whose inner and outer layers are composed of functionally graded materials whereas the middle one is assumed to be of isotropic material. This formation of a cylindrical shell influences stiffness modulii and the resultant material properties. The shell problem is formulated from the constitutive relations of stresses and strains with the displacement deformations and they are taken from Love’s thin shell theory. This problem is transformed into the integral form by evaluating the expressions for the strain and kinetic energies of the shell. Rayleigh-Ritz method is employed to solve the shell dynamic equations. Vibration characteristics of these cylindrical shells are investigated for a number of physical parameters and configurations of the fabrication of shells. The axial modal dependence is approximated by the characteristic beam functions that satisfy the boundary conditions. Results evaluated, show good agreement with the open literature.
