In the paper, a solution of one dimensional fore region pressure build up is put forward. The performance of spring supported thrust bearing is carried out with 3 dimensional thermo elasto hydrodynamic (TEHD) lub...In the paper, a solution of one dimensional fore region pressure build up is put forward. The performance of spring supported thrust bearing is carried out with 3 dimensional thermo elasto hydrodynamic (TEHD) lubrication theory inclusive of inlet pressure build up, thermal elastic distortion of pad and thermal effect. The effects of fore region pressure build up and the variation of some operating conditions on the performance of the pad are studied.展开更多
Audio applications such as mobile communication and hearing aid devices demand a small size but high performance, stable and low cost microphone to reproduce a high quality sound. Capacitive microphone can be designed...Audio applications such as mobile communication and hearing aid devices demand a small size but high performance, stable and low cost microphone to reproduce a high quality sound. Capacitive microphone can be designed to fulfill such requirements with some trade-offs between sensitivity, operating frequency range, and noise level mainly due to the effect of device structure dimensions and viscous damping. Smaller microphone size and air gap will gradually decrease its sensitivity and increase the viscous damping. The aim of this research was to develop a mathematical model of a spring-supported diaphragm capacitive MEMS microphone as well as an approach to optimize a microphone’s performance. Because of the complex shapes in this latest type of diaphragm design trend, analytical modelling has not been previously attempted. A novel diaphragm design is proposed that offers increased mechanical sensitivity of a capacitive microphone by reducing its diaphragm stiffness. A lumped element model of the spring-supported diaphragm microphone is developed to analyze the complex relations between the microphone performance factors and to find the optimum dimensions based on the design requirements. It is shown analytically that the spring dimensions of the spring-supported diaphragm do not have large effects on the microphone performance com pared to the diaphragm and backplate size, diaphragm thickness, and air-gap distance. A 1 mm2 spring-supported diaphragm microphone is designed using several optimized performance parameters to give a –3 dB operating bandwidth of 10.2 kHz, a sensitivity of 4.67 mV/Pa (–46.5 dB ref. 1 V/Pa at 1 kHz using a bias voltage of 3 V), a pull-in voltage of 13 V, and a thermal noise of –22 dBA SPL.展开更多
In civil and mining operations that involve ground excavation and support, the loads are distributed between the ground and support depending on their relative stiffness. This paper presents the development of concept...In civil and mining operations that involve ground excavation and support, the loads are distributed between the ground and support depending on their relative stiffness. This paper presents the development of conceptual single-degree-of-freedom models, which are used to derive equations for estimating displacements and stresses for ground-support interaction problems encountered in pillars in room-andpillar mining(natural support system), and liners for circular vertical shafts(artificial support systems).For pillar assessment, mine-pillar interaction curves can be constructed using a double spring analogy.Additionally, the effectiveness of different support systems can be evaluated depending on their effect upon the mine-pillar system. For shaft design, an initial estimation of the required lining strength and thickness can be readily made based on a double ring analogue. For both problems, the results from the proposed approach compare well with those obtained by finite element numerical simulations.展开更多
文摘In the paper, a solution of one dimensional fore region pressure build up is put forward. The performance of spring supported thrust bearing is carried out with 3 dimensional thermo elasto hydrodynamic (TEHD) lubrication theory inclusive of inlet pressure build up, thermal elastic distortion of pad and thermal effect. The effects of fore region pressure build up and the variation of some operating conditions on the performance of the pad are studied.
文摘Audio applications such as mobile communication and hearing aid devices demand a small size but high performance, stable and low cost microphone to reproduce a high quality sound. Capacitive microphone can be designed to fulfill such requirements with some trade-offs between sensitivity, operating frequency range, and noise level mainly due to the effect of device structure dimensions and viscous damping. Smaller microphone size and air gap will gradually decrease its sensitivity and increase the viscous damping. The aim of this research was to develop a mathematical model of a spring-supported diaphragm capacitive MEMS microphone as well as an approach to optimize a microphone’s performance. Because of the complex shapes in this latest type of diaphragm design trend, analytical modelling has not been previously attempted. A novel diaphragm design is proposed that offers increased mechanical sensitivity of a capacitive microphone by reducing its diaphragm stiffness. A lumped element model of the spring-supported diaphragm microphone is developed to analyze the complex relations between the microphone performance factors and to find the optimum dimensions based on the design requirements. It is shown analytically that the spring dimensions of the spring-supported diaphragm do not have large effects on the microphone performance com pared to the diaphragm and backplate size, diaphragm thickness, and air-gap distance. A 1 mm2 spring-supported diaphragm microphone is designed using several optimized performance parameters to give a –3 dB operating bandwidth of 10.2 kHz, a sensitivity of 4.67 mV/Pa (–46.5 dB ref. 1 V/Pa at 1 kHz using a bias voltage of 3 V), a pull-in voltage of 13 V, and a thermal noise of –22 dBA SPL.
文摘In civil and mining operations that involve ground excavation and support, the loads are distributed between the ground and support depending on their relative stiffness. This paper presents the development of conceptual single-degree-of-freedom models, which are used to derive equations for estimating displacements and stresses for ground-support interaction problems encountered in pillars in room-andpillar mining(natural support system), and liners for circular vertical shafts(artificial support systems).For pillar assessment, mine-pillar interaction curves can be constructed using a double spring analogy.Additionally, the effectiveness of different support systems can be evaluated depending on their effect upon the mine-pillar system. For shaft design, an initial estimation of the required lining strength and thickness can be readily made based on a double ring analogue. For both problems, the results from the proposed approach compare well with those obtained by finite element numerical simulations.
