A Pt-Rh three-way catalyst（M-DS） supported on CeO_2-ZrO_2-La_2O_3-Nd_2O_3 and its analogous supported catalyst（DS） were developed via a modified double-solvent method and conventional double-solvent method, respec...A Pt-Rh three-way catalyst（M-DS） supported on CeO_2-ZrO_2-La_2O_3-Nd_2O_3 and its analogous supported catalyst（DS） were developed via a modified double-solvent method and conventional double-solvent method, respectively. The as-prepared catalysts were characterized by N_2 adsorption-desorption, X-ray diffraction（XRD）, CO-chemisorption, X-ray photoelectron spectroscopy（XPS） and hydrogen temperature-programmed reduction（H_2-TPR）. The preformed Pt nanoparticles generated using ethanol as a reducing agent on M-DS presented enhanced Pt dispersion regardless of aging treatment as confirmed by XRD and CO-chemisorption measurements. The textural properties and reduction ability of M-DS were maintained to a large extent after aging treatment. This result was consistent with those of the N_2 adsorption-desorption and H_2-TPR, respectively. Meanwhile, the XPS analysis demonstrated that higher Pt^0 species and larger Ce^（3＋） concentration could be obtained for M-DS. In the conversion of a simulated compressed natural gas（CNG） vehicle exhaust, both fresh and aged M-DS showed a significant enhancement in the activity and N_2-selectivity. Particularly, the complete conversion temperature（T_（90）） of CH_4 over the aged M-DS catalyst was 65 oC lower than that over the aged catalyst by conventional double-solvent method.展开更多
The nanoparticles of polylactide (PLA) and poly(lactide-co-glycolide) (PLGA) were prepared by the bi-nary organic solvent diffusion method. The yield, particle size and size distribution of these nanoparticles wereeva...The nanoparticles of polylactide (PLA) and poly(lactide-co-glycolide) (PLGA) were prepared by the bi-nary organic solvent diffusion method. The yield, particle size and size distribution of these nanoparticles wereevaluated. The yield of nanoparticles prepared by this method is over 90%, and the average size of the nanoparticlesis between 130-180 nm. In order to clarify the effect of the organic solvent used in the system on nanoparticle yieldand size, the cloud points of PLA and PLGA were examined by cloud point titration. The results indicate that theyields of nanoparticles increase with the increase of ethanol in the acetone solution and attain the maximum at thecloud point of ethanol, while the size of nanoparticles decreases with the increase of ethanol in the acetone solutionand attains the minimum at the cloud point of ethanol. The optimal composition ratio of binary organic solvents coin-cides to that near the cloud point and the optimal condition of binary organic solvents can be predicted.展开更多
An O / W emulsion non-solvent addition method was used to prepare ethyleellulose (EC) microcapsules of water soluble pharmaceutical (theophylline). The solvent and non-solvent reagents used in this work were toluene a...An O / W emulsion non-solvent addition method was used to prepare ethyleellulose (EC) microcapsules of water soluble pharmaceutical (theophylline). The solvent and non-solvent reagents used in this work were toluene and cyclohexane. The effects of polymer concentration, core wall ratio and particle size on the kinetics as well as the dissolution rate of the drug were investigated. The results show that the dissolution rate increases with the increasing of polymer concentration and core wall ratio. The release of microcapsules prepared with different procedures can be selectively profiled with first order and Higuchi matrix kinetic models.展开更多
Rice husk high boiling solvent lignin （RHL） was prepared by high boiling solvent method, and its characteristics was analyzed by using chemical composition analysis, infrared spectroscopy, and ^1H-NMR and ^13C-NMR s...Rice husk high boiling solvent lignin （RHL） was prepared by high boiling solvent method, and its characteristics was analyzed by using chemical composition analysis, infrared spectroscopy, and ^1H-NMR and ^13C-NMR spectroscopy. The optimum prepared condition was that the rice husk with 70%-90% aqueous solution of 1, 4-butanediol was mixed with autoclave, under a certain weight ratio of solid raw material and solvent, heated to 200-220℃ for 1.0-3.0 h, then water-insoluble RHL was separated from the liquor reaction mixture by water precipitation. Results suggested that the lower digestion temperature and concentration of 1,4-butanediol were both unfavorable for extracting lignin. Chemical weight-average molecular weight of RHL was 1939 g·mol^-1, and the residual polysaccharide content was 5.12%. The ^1H-NMR spectra of RHL showed the relative intensity ratio, aliphatic over aromatic methoxyl groups, situated at 3.5-3.8 and 3.8-4.0 ppm, respectively. The results from ^13C-NMR spectra showed that β-O-4 bond and β-5 carbon-carbon linkage were the major linkages between RHL units. The C9-formula of RHL was calculated by the experiment data.展开更多
The influence of solvent and the rate of addition of water on the characteristics of alumina-zirconia powders obtained by sol-gel method were investigated. The Al2O3-ZrO2 powders (1:1 molar ratio) were prepared using ...The influence of solvent and the rate of addition of water on the characteristics of alumina-zirconia powders obtained by sol-gel method were investigated. The Al2O3-ZrO2 powders (1:1 molar ratio) were prepared using aluminum tri-sec-butoxide and zirconium n-propoxide as precursors. Ethanol (EtOH), isopropanol (iPrOH) and isobutanol (iBuOH) were used as solvents. The Al2O3-ZrO2 powders were characterized by nitrogen physisorption (SBET), Fourier transformed infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), differential thermal analysis (DTA), X-ray diffraction (XRD) and scanning electron microscopy (SEM). Prepared oxides calcined at 700℃ showed high specific surface area (200 - 240 m2/g). Obtained results suggest that the homogeneity of the mixed oxides is favored by using a water addition rate of 0.06 and 0.10 mL/min with ethanol as solvent.展开更多
In this work,a novel in situ auto-reduction strategy was developed to encapsulate uniformly dispersed Pd clusters/nanoparticles in MIL-125-NH_(2).It is demonstrated that the amino groups in MIL-125-NH_(2)can react wit...In this work,a novel in situ auto-reduction strategy was developed to encapsulate uniformly dispersed Pd clusters/nanoparticles in MIL-125-NH_(2).It is demonstrated that the amino groups in MIL-125-NH_(2)can react with formaldehyde to form novel reducing groups(-NH-CH_(2)OH),which can in situ auto-reduce the encapsulated Pd^(2+)ions to metallic Pd clusters/nanoparticles.As no additional reductants are required,the strategy limits the aggregation and migration of Pd clusters and the formation of large Pd nanoparticles via controlling the amount of Pd^(2+)precursor.When applied as catalysts in the hydrogenation of phenol in the aqueous phase,the obtained Pd(1.5)/MIL-125-NH-CH_(2)OH catalyst with highly dispersed Pd clusters/nanoparticles with the size of around 2 nm exhibited 100%of phenol conversion and 100%of cyclohexanone selectivity at 70℃ after 5 h,as well as remarkable reusability for at least five cycles due to the large MOF surface area,the highly dispersed Pd clusters/nanoparticles and their excellent stability within the MIL-125-NH-CH_(2)OH framework.展开更多
Novel cobalt Fischer-Tropsch synthesis （FTS） catalysts were prepared from natural halloysite nanotubes （HNT） by double-solvent and wet- impregnation methods, and characterized by TEM, XRD, TPR and N2 adsorption-de...Novel cobalt Fischer-Tropsch synthesis （FTS） catalysts were prepared from natural halloysite nanotubes （HNT） by double-solvent and wet- impregnation methods, and characterized by TEM, XRD, TPR and N2 adsorption-desorption. Comparing with the catalyst prepared by wet- impregnation method, the catalyst prepared by double-solvent method reduces Co3O4 particle migration and agglomeration due to size-induced effect, thus showing higher catalytic activity for Fischer-Tropsch synthesis.展开更多
Orthorhombic AgInS2 nanoplate and nanoparticle were synthesized using pyridine and 1-dodecanethiol as the solvent.The obtained products were characterized by X-ray diffraction（XRD）,field-emission scanning electron m...Orthorhombic AgInS2 nanoplate and nanoparticle were synthesized using pyridine and 1-dodecanethiol as the solvent.The obtained products were characterized by X-ray diffraction（XRD）,field-emission scanning electron microscope（FESEM）,field-emission transmission electron microscope（FETEM）,and the possible growth mechanism of AgInS2 was also proposed by the exploration of reaction temperature and time.Meanwhile,the bandgap of AgInS2 was calculated by the UV-Vis diffuse reflectance spectrum,and the photocatalytic activity was also investigated.Those experimental results indicate that the reaction temperature,reaction time and solvent have an influence on phase and morphology of AgInS2,and both AgInS2 nanoplate and nanoparticle have some ability on photocatalytic degradation of organic dyes under UV-Vis light irradiation.展开更多
Rechargeable aqueous Zn-ion batteries(AZIBs)are one of the most promising energy storage devices for large-scale energy storage owing to their high specific capacity,eco-friendliness,low cost and high safety.Neverthel...Rechargeable aqueous Zn-ion batteries(AZIBs)are one of the most promising energy storage devices for large-scale energy storage owing to their high specific capacity,eco-friendliness,low cost and high safety.Nevertheless,zinc metal anodes suffer from severe dendrite growth and side reactions,resulting in the inferior electrochemical performance of AZIBs.To address these problems,surface modification of zinc metal anodes is a facile and effective method to regulate the interaction between the zinc anode and an electrolyte.In this review,the current challenges and strategies for zinc metal anodes are presented.Furthermore,recent advances in surface modification strategies to improve their electrochemical performance are concluded and discussed.Finally,challenges and prospects for future development of zinc metal anodes are proposed.We hope this review will be useful for designing and fabricating highperformance AZIBs and boosting their practical applications.展开更多
In this study, in order to explain the solvent and spin state effects on the molecular structure of catechol-Fe complex [Fe(cat)3]n﹣?where n = 2 and 3, Hartree Fock (HF)-Density Functional Theory (DFT) hybrid calcula...In this study, in order to explain the solvent and spin state effects on the molecular structure of catechol-Fe complex [Fe(cat)3]n﹣?where n = 2 and 3, Hartree Fock (HF)-Density Functional Theory (DFT) hybrid calculations are performed at the B3LYP/6-311g(d,p) level of theory. The binding energies of Fe2+ and Fe3+ in high-spin state are higher than intermediate and low-spin states which show that the complex formation in a high spin state is more favorable. The calculated binding energies at different solvents indicate that the binding energies in polar solvents are lower than non-polar solvents. Furthermore, spectroscopic studies including FTIR and Raman spectrum in various solvents reveal that the formation of intermolecular bonds between the oxygen atom of carbonyl group and the hydrogen atom of solvent causes a spectral red shift. The calculated FTIR and geometry parameters are in good agreement with previous experimental data. Donor-acceptor interaction energies are evaluated due to the importance of the charge transfer in the complex formation. It is observed that the free electrons of oxygen atom interact with the antibonding orbitals of the iron. Finally, some correlations between the quantum chemical reactivity indices of the complexes and solvent polarity are considered. The study indicates a linear correlation between chemical hardness and binding energies of [Fe(cat)3]3﹣?complex.展开更多
A simple and efficient solvent-free method was developed for the acetylation of alcohols, phenols and amines in excellent yields employing glycerol-based sulfonic acid (-SO3H) functionalized carbon catalyst under envi...A simple and efficient solvent-free method was developed for the acetylation of alcohols, phenols and amines in excellent yields employing glycerol-based sulfonic acid (-SO3H) functionalized carbon catalyst under environmentally benign reaction conditions. The salient features of this protocol are the short reaction time, ease of product isolation and reusability of the carbon catalyst.展开更多
Eu3+ is extracted at pH 6 with 5. 0×10-2 mol/L benzo-15-crown-5 in dichloromethane from 5. 0×10-2 mol/L aqueous solution of lithium picrate. The enriched extractability has been investigated. In a concentrat...Eu3+ is extracted at pH 6 with 5. 0×10-2 mol/L benzo-15-crown-5 in dichloromethane from 5. 0×10-2 mol/L aqueous solution of lithium picrate. The enriched extractability has been investigated. In a concentration range from 2. 4 ×10-4 to 1. 8 ×10-3 mol/L solution of europium nitrates, the enrichment coefficients are calculated with the phasc ratio (organic/aqueous) of 1: 5 or 4: 25. The ability of 0. 5 mol/L HNO3 as a back-extractant is discussed with the volume ratio [organic/(0. 5 mol/L HNO3)] of 1 : 3. Crown ether and picric acid exist in the back-extractivephase. Eu3+ is effectively separated from the organic phase by the electrochemical method. The separation efficiency is more than 84%. The optimum electrolysis time or cell voltage is obtained from the relation between the electrolysis current and the time or the voltage.展开更多
In this study we used the deep eutectic solvents (ionic liquids) to investigate the reaction between copper (II) with ethylene diamine (en). Two of the existing methods for analyzing spectrophotometric measurements ha...In this study we used the deep eutectic solvents (ionic liquids) to investigate the reaction between copper (II) with ethylene diamine (en). Two of the existing methods for analyzing spectrophotometric measurements have been applied for establishing, the stoichiometry and whenever possible, the stability constants of the chelates formed. The method of continuous variations was necessary to determine first whether, the metal ion and the ligand ethylene diamine form one or more than one chelate, when more than one chelate formed, the results obtained depend on the wavelength and for meaningful conclusions the wavelengths were carefully selected. The empirical formulae of the chelates were further substantiated by the molar ratio method. The effect of time and temperature on the formation and stability of these chelates in solution is also studied. The stability constants, K1 and K2 for the copper (II) chelates were calculated, though reliable, and are comparable to literature values.展开更多
基金supported by the National Key Research and Development Program of China(2016YFC0204902)
文摘A Pt-Rh three-way catalyst（M-DS） supported on CeO_2-ZrO_2-La_2O_3-Nd_2O_3 and its analogous supported catalyst（DS） were developed via a modified double-solvent method and conventional double-solvent method, respectively. The as-prepared catalysts were characterized by N_2 adsorption-desorption, X-ray diffraction（XRD）, CO-chemisorption, X-ray photoelectron spectroscopy（XPS） and hydrogen temperature-programmed reduction（H_2-TPR）. The preformed Pt nanoparticles generated using ethanol as a reducing agent on M-DS presented enhanced Pt dispersion regardless of aging treatment as confirmed by XRD and CO-chemisorption measurements. The textural properties and reduction ability of M-DS were maintained to a large extent after aging treatment. This result was consistent with those of the N_2 adsorption-desorption and H_2-TPR, respectively. Meanwhile, the XPS analysis demonstrated that higher Pt^0 species and larger Ce^（3＋） concentration could be obtained for M-DS. In the conversion of a simulated compressed natural gas（CNG） vehicle exhaust, both fresh and aged M-DS showed a significant enhancement in the activity and N_2-selectivity. Particularly, the complete conversion temperature（T_（90）） of CH_4 over the aged M-DS catalyst was 65 oC lower than that over the aged catalyst by conventional double-solvent method.
基金Project ( 2001AA218011) supported by the National High Technology Development "863" Program of China
文摘The nanoparticles of polylactide (PLA) and poly(lactide-co-glycolide) (PLGA) were prepared by the bi-nary organic solvent diffusion method. The yield, particle size and size distribution of these nanoparticles wereevaluated. The yield of nanoparticles prepared by this method is over 90%, and the average size of the nanoparticlesis between 130-180 nm. In order to clarify the effect of the organic solvent used in the system on nanoparticle yieldand size, the cloud points of PLA and PLGA were examined by cloud point titration. The results indicate that theyields of nanoparticles increase with the increase of ethanol in the acetone solution and attain the maximum at thecloud point of ethanol, while the size of nanoparticles decreases with the increase of ethanol in the acetone solutionand attains the minimum at the cloud point of ethanol. The optimal composition ratio of binary organic solvents coin-cides to that near the cloud point and the optimal condition of binary organic solvents can be predicted.
文摘An O / W emulsion non-solvent addition method was used to prepare ethyleellulose (EC) microcapsules of water soluble pharmaceutical (theophylline). The solvent and non-solvent reagents used in this work were toluene and cyclohexane. The effects of polymer concentration, core wall ratio and particle size on the kinetics as well as the dissolution rate of the drug were investigated. The results show that the dissolution rate increases with the increasing of polymer concentration and core wall ratio. The release of microcapsules prepared with different procedures can be selectively profiled with first order and Higuchi matrix kinetic models.
基金This study was sponsored by the Research Funding for Key Laboratory of Cellulose and Ligno cellulosics Chemistry, Guangzhou Institute of Chemistry, Chinese Academy of Sciences (No. LCLC-2004-158)the National Natural Science Foundation of Fujian(No. Z0513015)
文摘Rice husk high boiling solvent lignin （RHL） was prepared by high boiling solvent method, and its characteristics was analyzed by using chemical composition analysis, infrared spectroscopy, and ^1H-NMR and ^13C-NMR spectroscopy. The optimum prepared condition was that the rice husk with 70%-90% aqueous solution of 1, 4-butanediol was mixed with autoclave, under a certain weight ratio of solid raw material and solvent, heated to 200-220℃ for 1.0-3.0 h, then water-insoluble RHL was separated from the liquor reaction mixture by water precipitation. Results suggested that the lower digestion temperature and concentration of 1,4-butanediol were both unfavorable for extracting lignin. Chemical weight-average molecular weight of RHL was 1939 g·mol^-1, and the residual polysaccharide content was 5.12%. The ^1H-NMR spectra of RHL showed the relative intensity ratio, aliphatic over aromatic methoxyl groups, situated at 3.5-3.8 and 3.8-4.0 ppm, respectively. The results from ^13C-NMR spectra showed that β-O-4 bond and β-5 carbon-carbon linkage were the major linkages between RHL units. The C9-formula of RHL was calculated by the experiment data.
文摘The influence of solvent and the rate of addition of water on the characteristics of alumina-zirconia powders obtained by sol-gel method were investigated. The Al2O3-ZrO2 powders (1:1 molar ratio) were prepared using aluminum tri-sec-butoxide and zirconium n-propoxide as precursors. Ethanol (EtOH), isopropanol (iPrOH) and isobutanol (iBuOH) were used as solvents. The Al2O3-ZrO2 powders were characterized by nitrogen physisorption (SBET), Fourier transformed infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), differential thermal analysis (DTA), X-ray diffraction (XRD) and scanning electron microscopy (SEM). Prepared oxides calcined at 700℃ showed high specific surface area (200 - 240 m2/g). Obtained results suggest that the homogeneity of the mixed oxides is favored by using a water addition rate of 0.06 and 0.10 mL/min with ethanol as solvent.
基金financial support from the National Natural Science Foundation of China(Grant No.51802015)the Research Department Closed Carbon Cycle Economy(CCCE)at the Ruhr-University Bochum,Fundamental Research Funds for the Central Universities(No.FRF-TP-20-005A3)the Fundamental Research Funds for the Central Universities and the Youth Teacher International Exchange&Growth Program(Grant No.QNXM20210016)。
文摘In this work,a novel in situ auto-reduction strategy was developed to encapsulate uniformly dispersed Pd clusters/nanoparticles in MIL-125-NH_(2).It is demonstrated that the amino groups in MIL-125-NH_(2)can react with formaldehyde to form novel reducing groups(-NH-CH_(2)OH),which can in situ auto-reduce the encapsulated Pd^(2+)ions to metallic Pd clusters/nanoparticles.As no additional reductants are required,the strategy limits the aggregation and migration of Pd clusters and the formation of large Pd nanoparticles via controlling the amount of Pd^(2+)precursor.When applied as catalysts in the hydrogenation of phenol in the aqueous phase,the obtained Pd(1.5)/MIL-125-NH-CH_(2)OH catalyst with highly dispersed Pd clusters/nanoparticles with the size of around 2 nm exhibited 100%of phenol conversion and 100%of cyclohexanone selectivity at 70℃ after 5 h,as well as remarkable reusability for at least five cycles due to the large MOF surface area,the highly dispersed Pd clusters/nanoparticles and their excellent stability within the MIL-125-NH-CH_(2)OH framework.
基金supported by the National Natural Science foundation of China (21073238)the National Basic Research Program of China(2011CB211704)the Special Fund for Basic Scientific Research of Central Colleges,South-Central University for Nationalities
文摘Novel cobalt Fischer-Tropsch synthesis （FTS） catalysts were prepared from natural halloysite nanotubes （HNT） by double-solvent and wet- impregnation methods, and characterized by TEM, XRD, TPR and N2 adsorption-desorption. Comparing with the catalyst prepared by wet- impregnation method, the catalyst prepared by double-solvent method reduces Co3O4 particle migration and agglomeration due to size-induced effect, thus showing higher catalytic activity for Fischer-Tropsch synthesis.
基金Supported by the Natural Science Foundation of Chongqing(Nos.cstc2013jcyj A50033,cstc2015jcyj A0317)the Project Foundation of Chongqing Municipal Education Committee(Nos.KJ1601403,KJ1601412)+1 种基金Key Laboratory for Green Chemical Technology of Chongqing University of Education(No.2016xjpt08)the Project Foundation of Chongqing University of Education(Nos.JG201715,XK20170210)
文摘Orthorhombic AgInS2 nanoplate and nanoparticle were synthesized using pyridine and 1-dodecanethiol as the solvent.The obtained products were characterized by X-ray diffraction（XRD）,field-emission scanning electron microscope（FESEM）,field-emission transmission electron microscope（FETEM）,and the possible growth mechanism of AgInS2 was also proposed by the exploration of reaction temperature and time.Meanwhile,the bandgap of AgInS2 was calculated by the UV-Vis diffuse reflectance spectrum,and the photocatalytic activity was also investigated.Those experimental results indicate that the reaction temperature,reaction time and solvent have an influence on phase and morphology of AgInS2,and both AgInS2 nanoplate and nanoparticle have some ability on photocatalytic degradation of organic dyes under UV-Vis light irradiation.
基金supported by the National Key Research and Development Program of China(2020YFB1713500)the Chinese 02 Special Fund(2017ZX02408003)+2 种基金the Open Fund of National Joint Engineering Research Center for abrasion control and molding of metal materials(HKDNM201807)the Student Research Training Plan of Henan University of Science and Technology(2020026)the National Undergraduate Innovation and Entrepreneurship Training Program(202010464031,202110464005)。
文摘Rechargeable aqueous Zn-ion batteries(AZIBs)are one of the most promising energy storage devices for large-scale energy storage owing to their high specific capacity,eco-friendliness,low cost and high safety.Nevertheless,zinc metal anodes suffer from severe dendrite growth and side reactions,resulting in the inferior electrochemical performance of AZIBs.To address these problems,surface modification of zinc metal anodes is a facile and effective method to regulate the interaction between the zinc anode and an electrolyte.In this review,the current challenges and strategies for zinc metal anodes are presented.Furthermore,recent advances in surface modification strategies to improve their electrochemical performance are concluded and discussed.Finally,challenges and prospects for future development of zinc metal anodes are proposed.We hope this review will be useful for designing and fabricating highperformance AZIBs and boosting their practical applications.
文摘In this study, in order to explain the solvent and spin state effects on the molecular structure of catechol-Fe complex [Fe(cat)3]n﹣?where n = 2 and 3, Hartree Fock (HF)-Density Functional Theory (DFT) hybrid calculations are performed at the B3LYP/6-311g(d,p) level of theory. The binding energies of Fe2+ and Fe3+ in high-spin state are higher than intermediate and low-spin states which show that the complex formation in a high spin state is more favorable. The calculated binding energies at different solvents indicate that the binding energies in polar solvents are lower than non-polar solvents. Furthermore, spectroscopic studies including FTIR and Raman spectrum in various solvents reveal that the formation of intermolecular bonds between the oxygen atom of carbonyl group and the hydrogen atom of solvent causes a spectral red shift. The calculated FTIR and geometry parameters are in good agreement with previous experimental data. Donor-acceptor interaction energies are evaluated due to the importance of the charge transfer in the complex formation. It is observed that the free electrons of oxygen atom interact with the antibonding orbitals of the iron. Finally, some correlations between the quantum chemical reactivity indices of the complexes and solvent polarity are considered. The study indicates a linear correlation between chemical hardness and binding energies of [Fe(cat)3]3﹣?complex.
文摘A simple and efficient solvent-free method was developed for the acetylation of alcohols, phenols and amines in excellent yields employing glycerol-based sulfonic acid (-SO3H) functionalized carbon catalyst under environmentally benign reaction conditions. The salient features of this protocol are the short reaction time, ease of product isolation and reusability of the carbon catalyst.
文摘Eu3+ is extracted at pH 6 with 5. 0×10-2 mol/L benzo-15-crown-5 in dichloromethane from 5. 0×10-2 mol/L aqueous solution of lithium picrate. The enriched extractability has been investigated. In a concentration range from 2. 4 ×10-4 to 1. 8 ×10-3 mol/L solution of europium nitrates, the enrichment coefficients are calculated with the phasc ratio (organic/aqueous) of 1: 5 or 4: 25. The ability of 0. 5 mol/L HNO3 as a back-extractant is discussed with the volume ratio [organic/(0. 5 mol/L HNO3)] of 1 : 3. Crown ether and picric acid exist in the back-extractivephase. Eu3+ is effectively separated from the organic phase by the electrochemical method. The separation efficiency is more than 84%. The optimum electrolysis time or cell voltage is obtained from the relation between the electrolysis current and the time or the voltage.
文摘In this study we used the deep eutectic solvents (ionic liquids) to investigate the reaction between copper (II) with ethylene diamine (en). Two of the existing methods for analyzing spectrophotometric measurements have been applied for establishing, the stoichiometry and whenever possible, the stability constants of the chelates formed. The method of continuous variations was necessary to determine first whether, the metal ion and the ligand ethylene diamine form one or more than one chelate, when more than one chelate formed, the results obtained depend on the wavelength and for meaningful conclusions the wavelengths were carefully selected. The empirical formulae of the chelates were further substantiated by the molar ratio method. The effect of time and temperature on the formation and stability of these chelates in solution is also studied. The stability constants, K1 and K2 for the copper (II) chelates were calculated, though reliable, and are comparable to literature values.
