Multi-layer slopes are widely found in clay residue receiving fields.A generalized horizontal slice method(GHSM)for assessing the stability of multi-layer slopes that considers the energy dissipation between adjacent ...Multi-layer slopes are widely found in clay residue receiving fields.A generalized horizontal slice method(GHSM)for assessing the stability of multi-layer slopes that considers the energy dissipation between adjacent horizontal slices is presented.In view of the upper-bound limit analysis theory,the energy equation is derived and the ultimate failure mode is generated by comparing the sliding surface passing through the slope toe(mode A)with that below(mode B).In addition,the influence of the number of slices on the stability coefficients in the GHSM is studied and the stable value is obtained.Compared to the original method(Chen’s method),the GHSM can acquire more precise results,which takes into account the energy dissipation in the inner sliding soil mass.Moreover,the GHSM,limit equilibrium method(LEM)and numerical simulation method(NSM)are applied to analyze the stability of a multi-layer slope with different slope angles and the results of the safety factor and failure mode are very close in each case.The ultimate failure modes are shown to be mode B when the slope angle is not more than 28°.It illustrates that the determination of the ultimate sliding surface requires comparison of multiple failure modes,not only mode A.展开更多
Although slice methods are simple and effective slope stability analysis approaches,they are statically indeterminate.Several modifications of the slice method,such as the Spencer,MorgensternPrice,and Chen-Morgenstern...Although slice methods are simple and effective slope stability analysis approaches,they are statically indeterminate.Several modifications of the slice method,such as the Spencer,MorgensternPrice,and Chen-Morgenstern methods,are statically determinate and solvable as they assume the inter-slice force inclination angle;however,there is a small gap between the assumptions and actual landslide stability analysis.Through reasonable theoretical analysis,the Su slice method provides a reliable approach for determining the inter-slice force inclination angle that can be used in slice analysis to accurately analyse,calculate,and evaluate the stability of landslides.However,the Su slice method requires further research and analysis,especially in terms of the parameter values sinλbiandρ.In this study,we investigated more accurate methods for calculating the parameters sinλbiandρ.In addition,an adjustment coefficient(μ)was introduced to improve the solution method for the inter-slice force inclination angle.The inter-slice force inclination and safety factors of three landslides with arc-shaped slip surfaces and one landslide with a polyline-shaped slip surface were analysed and compared using the different slice methods.The improved inter-slice force inclination not only satisfies the calculation of static force equilibrium condition but also satisfies the calculation of both the force and moment equilibrium conditions.The improved method for calculating inter-slice force inclination presented the best correlation.The safety factors calculated using the improved Su slice method were close to those obtained using numerical simulations and the Morgenstern-Price method.Despite negligible differences among the safety factors calculated using the Su slice,improved Su slice,and M-P methods,the accuracy of the improved Su slice method was better than the M-P method in terms of inter-slice force inclination angles which can be useful to improve protection engineering design.展开更多
The original temporal clustering analysis (OTCA) is an effective technique for obtaining brain activation maps when the timing and location of the activation are completely unknown, but its deficiency of sensitivity i...The original temporal clustering analysis (OTCA) is an effective technique for obtaining brain activation maps when the timing and location of the activation are completely unknown, but its deficiency of sensitivity is exposed in processing brain activation signal which is relatively weak. The time slice analysis method based on OTCA is proposed considering the weakness of the functional magnetic resonance imaging (fMRI) signal of the rat model. By dividing the stimulation period into several time slices and analyzing each slice to detect the activated pixels respectively after the background removal, the sensitivity is significantly improved. The inhibitory response in the hypothalamus after glucose loading is detected successfully with this method in the experiment on rat. Combined with the OTCA method, the time slice analysis method based on OTCA is effective on detecting when, where and which type of response will happen after stimulation, even if the fMRI signal is weak.展开更多
The searching method of failure surface which consists of complex geological structures in high and steep rock slopes was studied. Based on computer simulation technology and Monte-Carlo method, three dimensional mult...The searching method of failure surface which consists of complex geological structures in high and steep rock slopes was studied. Based on computer simulation technology and Monte-Carlo method, three dimensional multi-scale geological structures such as engineering scale and statistical scale structures of the slope were simulated. The searching method of failure route which consists of joints and rock bridges was determined via simulation annealing method by considering the shear strength of joints or rock bridges in one supposed route. When shear strengths of all the supposed routes were computed, the least shear strength route was considered failure route. Then, the inclined slice of joint slices and rock bridge slices were separated according to the position of joints and rock bridges. For the rock bridge slices, by distinguishing the failure model, the force direction to the next slice was defined. Finally, the limit equilibrium equations for every slice were established, and the slope stability factor was obtained. One practical example indicates that the discussed method is more closely to the real condition.展开更多
Reasonable assessment of slope deformation under cyclic loading is of great significance for securing the safety of slopes. The observations of centrifuge model tests are analyzed on the slope deformation behavior und...Reasonable assessment of slope deformation under cyclic loading is of great significance for securing the safety of slopes. The observations of centrifuge model tests are analyzed on the slope deformation behavior under cyclic loading conditions. The potential slip surface is the key for slope failure and follows two rules:(i) the relative horizontal displacement along the potential slip surface is invariable at an elevation, and(ii) the soil along the slip surface exhibits the same degradation pattern. These rules are effective regardless of the location of the potential slip surface throughout the entire deformation process of a homogeneous slope, ranging from the initial deformation stage to the failure process and to the post-failure stage. A new, simplified method is proposed by deriving the displacement compatibility equation and unified degradation equation according to the fundamental rules. The method has few parameters that can be determined through traditional element tests. The predictions from the proposed method agree with the centrifuge test results with vertical loading and shaking table loading. This result confirms that the proposed method is effective in predicting the full deformation process of slopes under different cyclic loading conditions.展开更多
Landslide is common phenomena in construction field. Nowadays the cylindrical surface method has been used widely to analyze slope stability. However, this method contains two main disadvantages： firstly, the slip su...Landslide is common phenomena in construction field. Nowadays the cylindrical surface method has been used widely to analyze slope stability. However, this method contains two main disadvantages： firstly, the slip surface is assumed to be in circular shape while in fact it is ellipsoid commonly; and secondly, resolve by difference method causing immensely complicated process due to statically indeterminate equations. In this paper, the authors have presented a method that allows transferring of ellipsoid slip surface to cylindrical shape and carries out a single variable equation （by applying integration method）. Also thanks to this method, the current cylindrical surface method has been proved that its application is proper for man-made slopes but usually inappropriate for natural ones. Those results help analysis of slope stability reaching closer to reality.展开更多
基金support provided by the National Key R&D Program of China(No.2017YFC1501304)the National Natural Science Foundation of China(Nos.42090054,41922055 and 41931295)the Fundamental Research Funds for the Central Universities,China University of Geosciences(Wuhan)(No.CUGGC09).
文摘Multi-layer slopes are widely found in clay residue receiving fields.A generalized horizontal slice method(GHSM)for assessing the stability of multi-layer slopes that considers the energy dissipation between adjacent horizontal slices is presented.In view of the upper-bound limit analysis theory,the energy equation is derived and the ultimate failure mode is generated by comparing the sliding surface passing through the slope toe(mode A)with that below(mode B).In addition,the influence of the number of slices on the stability coefficients in the GHSM is studied and the stable value is obtained.Compared to the original method(Chen’s method),the GHSM can acquire more precise results,which takes into account the energy dissipation in the inner sliding soil mass.Moreover,the GHSM,limit equilibrium method(LEM)and numerical simulation method(NSM)are applied to analyze the stability of a multi-layer slope with different slope angles and the results of the safety factor and failure mode are very close in each case.The ultimate failure modes are shown to be mode B when the slope angle is not more than 28°.It illustrates that the determination of the ultimate sliding surface requires comparison of multiple failure modes,not only mode A.
基金evolution mechanism and prevention countermeasures of the Outang landslide in the Three Gorges Reservoir Area(No.20C0023)research projectthe geological safety risk investigation,evaluation and control of key resettlement towns in the Three Gorges Reservoir Area(No.HBHDZFCG2021025)+2 种基金the National Natural Science Foundation of China(No.42077268)the Chongqing Geological Disaster Prevention and Control Center of China(No.20C0023)the open fund of state key laboratory of geohazard prevention and geoenvironment protection(No.SKLGP2020K015)。
文摘Although slice methods are simple and effective slope stability analysis approaches,they are statically indeterminate.Several modifications of the slice method,such as the Spencer,MorgensternPrice,and Chen-Morgenstern methods,are statically determinate and solvable as they assume the inter-slice force inclination angle;however,there is a small gap between the assumptions and actual landslide stability analysis.Through reasonable theoretical analysis,the Su slice method provides a reliable approach for determining the inter-slice force inclination angle that can be used in slice analysis to accurately analyse,calculate,and evaluate the stability of landslides.However,the Su slice method requires further research and analysis,especially in terms of the parameter values sinλbiandρ.In this study,we investigated more accurate methods for calculating the parameters sinλbiandρ.In addition,an adjustment coefficient(μ)was introduced to improve the solution method for the inter-slice force inclination angle.The inter-slice force inclination and safety factors of three landslides with arc-shaped slip surfaces and one landslide with a polyline-shaped slip surface were analysed and compared using the different slice methods.The improved inter-slice force inclination not only satisfies the calculation of static force equilibrium condition but also satisfies the calculation of both the force and moment equilibrium conditions.The improved method for calculating inter-slice force inclination presented the best correlation.The safety factors calculated using the improved Su slice method were close to those obtained using numerical simulations and the Morgenstern-Price method.Despite negligible differences among the safety factors calculated using the Su slice,improved Su slice,and M-P methods,the accuracy of the improved Su slice method was better than the M-P method in terms of inter-slice force inclination angles which can be useful to improve protection engineering design.
基金the National Natural Science Foundation of China (30370432)
文摘The original temporal clustering analysis (OTCA) is an effective technique for obtaining brain activation maps when the timing and location of the activation are completely unknown, but its deficiency of sensitivity is exposed in processing brain activation signal which is relatively weak. The time slice analysis method based on OTCA is proposed considering the weakness of the functional magnetic resonance imaging (fMRI) signal of the rat model. By dividing the stimulation period into several time slices and analyzing each slice to detect the activated pixels respectively after the background removal, the sensitivity is significantly improved. The inhibitory response in the hypothalamus after glucose loading is detected successfully with this method in the experiment on rat. Combined with the OTCA method, the time slice analysis method based on OTCA is effective on detecting when, where and which type of response will happen after stimulation, even if the fMRI signal is weak.
基金Project(50539100) supported by the National Natural Science Foundation of ChinaProject(BK2006171) supported by the Jiangsu Natural Science Foundation
文摘The searching method of failure surface which consists of complex geological structures in high and steep rock slopes was studied. Based on computer simulation technology and Monte-Carlo method, three dimensional multi-scale geological structures such as engineering scale and statistical scale structures of the slope were simulated. The searching method of failure route which consists of joints and rock bridges was determined via simulation annealing method by considering the shear strength of joints or rock bridges in one supposed route. When shear strengths of all the supposed routes were computed, the least shear strength route was considered failure route. Then, the inclined slice of joint slices and rock bridge slices were separated according to the position of joints and rock bridges. For the rock bridge slices, by distinguishing the failure model, the force direction to the next slice was defined. Finally, the limit equilibrium equations for every slice were established, and the slope stability factor was obtained. One practical example indicates that the discussed method is more closely to the real condition.
基金Tsinghua University Initiative Scientific Research Program,State key Laboratory of Hydroscience and Engineering (Grant No. 2020-KY-04)National Natural Science Foundation of China (Grant No. 52039005)。
文摘Reasonable assessment of slope deformation under cyclic loading is of great significance for securing the safety of slopes. The observations of centrifuge model tests are analyzed on the slope deformation behavior under cyclic loading conditions. The potential slip surface is the key for slope failure and follows two rules:(i) the relative horizontal displacement along the potential slip surface is invariable at an elevation, and(ii) the soil along the slip surface exhibits the same degradation pattern. These rules are effective regardless of the location of the potential slip surface throughout the entire deformation process of a homogeneous slope, ranging from the initial deformation stage to the failure process and to the post-failure stage. A new, simplified method is proposed by deriving the displacement compatibility equation and unified degradation equation according to the fundamental rules. The method has few parameters that can be determined through traditional element tests. The predictions from the proposed method agree with the centrifuge test results with vertical loading and shaking table loading. This result confirms that the proposed method is effective in predicting the full deformation process of slopes under different cyclic loading conditions.
文摘Landslide is common phenomena in construction field. Nowadays the cylindrical surface method has been used widely to analyze slope stability. However, this method contains two main disadvantages： firstly, the slip surface is assumed to be in circular shape while in fact it is ellipsoid commonly; and secondly, resolve by difference method causing immensely complicated process due to statically indeterminate equations. In this paper, the authors have presented a method that allows transferring of ellipsoid slip surface to cylindrical shape and carries out a single variable equation （by applying integration method）. Also thanks to this method, the current cylindrical surface method has been proved that its application is proper for man-made slopes but usually inappropriate for natural ones. Those results help analysis of slope stability reaching closer to reality.
