This paper describes a commonly used pseudo-static method in seismic resistant design of the cross section of underground structures. Based on dynamic theory and the vibration characteristics of underground structures...This paper describes a commonly used pseudo-static method in seismic resistant design of the cross section of underground structures. Based on dynamic theory and the vibration characteristics of underground structures, the sources of errors when using this method are analyzed. The traditional seismic motion loading approach is replaced by a method in which a one-dimensional soil layer response stress is differentiated and then converted into seismic live loads. To validate the improved method, a comparison of analytical results is conducted for internal forces under earthquake shaking of a typical shallow embedded box-shaped subway station structure using four methods： the response displacement method, finite element response acceleration method, the finite element dynamic analysis method and the improved pseudo-static calculation method. It is shown that the improved finite element pseudo-static method proposed in this paper provides an effective tool for the seismic design of underground structures. The evaluation yields results close to those obtained by the finite element dynamic analysis method, and shows that the improved finite element pseudo-static method provides a higher degree of precision.展开更多
traditional In this paper, two drawbacks pseudo-static method （vertical of the slice method） in the slope stability evaluation have been studied. First, the sliding mass is divided into vertical slices according to...traditional In this paper, two drawbacks pseudo-static method （vertical of the slice method） in the slope stability evaluation have been studied. First, the sliding mass is divided into vertical slices according to this method, which is irrational to some extent in the seismic design of slope. Second, only peak ground acceleration （PGA） is considered, and the effects of shaking frequency and duration on slope stability are neglected. And then, based on the theory of elastic wave and the summarized geological model, this paper put forwards an improved method of pseudo-method by using the theory of elastic wave and Hilbert-Huang transform. The improved pseudostatic method gives reasonable considerations to the time-frequency effects of seismic wave and its rationality has been verified by the shaking table test. This method can evaluate the safety of a slope, the happening time and the scale of landslides. At the same time, this method also can improve the high accuracy of the evaluation of the safety of the slope.展开更多
Sudden and unforeseen seismic failures of coal mine overburden(OB)dump slopes interrupt mining operations,cause loss of lives and delay the production of coal.Consideration of the spatial heterogeneity of OB dump mate...Sudden and unforeseen seismic failures of coal mine overburden(OB)dump slopes interrupt mining operations,cause loss of lives and delay the production of coal.Consideration of the spatial heterogeneity of OB dump materials is imperative for an adequate evaluation of the seismic stability of OB dump slopes.In this study,pseudo-static seismic stability analyses are carried out for an OB dump slope by considering the material parameters obtained from an insitu field investigation.Spatial heterogeneity is simulated through use of the random finite element method(RFEM)and the random limit equilibrium method(RLEM)and a comparative study is presented.Combinations of horizontal and vertical spatial correlation lengths were considered for simulating isotropic and anisotropic random fields within the OB dump slope.Seismic performances of the slope have been reported through the probability of failure and reliability index.It was observed that the RLEM approach overestimates failure probability(P_(f))by considering seismic stability with spatial heterogeneity.The P_(f)was observed to increase with an increase in the coefficient of variation of friction angle of the dump materials.Further,it was inferred that the RLEM approach may not be adequately applicable for assessing the seismic stability of an OB dump slope for a horizontal seismic coefficient that is more than or equal to 0.1.展开更多
In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to ...In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to obtain the maximal positive definite solution of nonlinear matrix equation X+A^(*)X|^(-α)A=Q with the case 0<α≤1.Based on this method,a new iterative algorithm is developed,and its convergence proof is given.Finally,two numerical examples are provided to show the effectiveness of the proposed method.展开更多
Objectives This review aimed to systematically synthesize the available research on the disclosure of diagnosis and related issues in childhood cancer from the perspectives of healthcare professionals,with the goal of...Objectives This review aimed to systematically synthesize the available research on the disclosure of diagnosis and related issues in childhood cancer from the perspectives of healthcare professionals,with the goal of informing the optimization of disclosure processes and meeting the communication needs of affected families.Methods In accordance with the Joanna Briggs Institute(JBI)methodology for mixed methods systematic reviews,the convergent segregated approach was used in this review.Articles were retrieved from 11 databases,including PubMed,Web of Science,CINAHL,CENTRAL,Embase,Ovid/Medline,PsycINFO,PsycArticles,Scopus,ERIC,and China National Knowledge Infrastructure(CNKI).The quality of the selected articles was assessed using the Mixed Method Appraisal Tool(MMAT).The review protocol was registered on PROSPERO(CRD42024542746).Results A total of 21 studies from 10 countries were included.Their methodological quality was generally medium to high,with MMAT scores ranging from 60%to 100%.The synthesis yielded three core themes:1)the spectrum of professional and societal attitudes toward disclosure;2)the dynamic practices of navigating disclosure amid uncertainty,including timing and environment,stakeholders,and content of disclosure;and 3)factors influencing disclosure,including children’s,parental,healthcare professionals’,and socio-cultural factors.Conclusions This review synthesized the perspectives and experiences of healthcare professionals regarding disclosure in childhood cancer,highlighting the complexity and multidimensional nature of this process in clinical practice.Future research should further investigate the experiences and needs of children and their parents,explore cultural variations in disclosure practices,develop context-appropriate assessment tools,and construct multidimensional intervention strategies to enhance the humanistic care and professional effectiveness of the disclosure process.展开更多
As binary geological media,soil-rock mixtures(SRMs)exhibit a distinct gradational composition,leading to their unique mechanical behaviors.To appraise the stability of SRM slopes,it is essential to determine equivalen...As binary geological media,soil-rock mixtures(SRMs)exhibit a distinct gradational composition,leading to their unique mechanical behaviors.To appraise the stability of SRM slopes,it is essential to determine equivalent parameters of SRMs,which are typically obtained through experimental and numerical methods.In contrasted to other numerical methods,the numerical manifold method(NMM)is more effective in addressing SRM problems.This is because the high-precision regular mathematical meshes in NMM can be used without aligning with the soil-rock interfaces and boundaries of SRMs.In the current research,the equivalent strength parameters of SRMs,i.e.the equivalent cohesion ce and internal friction angleϕ_(e),are determined using NMM.Initially,an NMM triaxial numerical model is established and validated based on triaxial experiments.Subsequently,the soil and rock parameters are derived through parameter inversion.Moreover,the impacts of rock content,size,shape and rock blocks'major-axis orientation on ce andϕ_(e) of SRMs are thoroughly examined using the NMM triaxial numerical model.Additionally,a fitting function is proposed to linkϕ_(e) to the rock content and size of SRMs.When other influencing factors are fixed,the above fitting model leads to the following conclusions:(1)the predictedϕ_(e) of SRMs increase with the increase of rock content;and(2)SRM samples with smaller rocks display a higher predictedϕ_(e).展开更多
The Good Wife is an American TV series that focuses on women’s independence,politics,and law.The drama has been remade in China,Japan,and South Korea.This research aims to use Nida’s Functional Equivalence Theory to...The Good Wife is an American TV series that focuses on women’s independence,politics,and law.The drama has been remade in China,Japan,and South Korea.This research aims to use Nida’s Functional Equivalence Theory to analyze the methods of its English-to-Chinese subtitle translation by considering social,cultural,and historic backgrounds between China and America.After data collection and case analysis,the study found that:(1)Five major translation methods are adopted in the subtitle translation of The Good Wife.They are free translation,variation,literal translation,addition,and omission.Among them,free translation is the most frequently used,while omission is used least.(2)The subtitle translation of films and TV series is limited by time and space restrictions,social-cultural differences,and other factors.When translating,translators should try to use humorous words,euphemism,intonation,and other ways,and combine different methods such as literal translation,free translation,variation,addition,omission,and other methods to seek equivalence both in the meaning and function of subtitles under the guidance of Functional Equivalence Theory.展开更多
This paper develops a semi-analytical solution for pile penetration in natural soft clays using the strain path method(SPM).The stress-strain behavior of soils is characterized by the S-CLAY1S model,which can capture ...This paper develops a semi-analytical solution for pile penetration in natural soft clays using the strain path method(SPM).The stress-strain behavior of soils is characterized by the S-CLAY1S model,which can capture the anisotropic evolution and destructuring nature of soft clays.By integrating the S-CLAY1S model into the theoretical framework of the SPM,a set of ordinary differential equations is formulated with respect to the vertical coordinate of soil particles.The distribution of excess pore water pressure(EPWP)following pile installation is approximated through one-dimensional(1D)radial integration around the pile shaft.The distribution of stresses and EPWP,along with the evolution of fabric anisotropy within the soil surrounding the pile,is presented to illustrate the response of pile penetration in natural soft clays.The proposed solution is validated against existing theoretical solutions using the SPM and cavity expansion method(CEM),along with experimental data.The findings demonstrate that the SPM reveals lower radial effective stresses and EPWP at the pile shaft than that of CEM.Pile penetration alters the soil's anisotropic properties,inducing rotational hardening and affecting post-installation stress distribution.Soil destructuration eliminates bonding among particles near the pile,resulting in a complete disruption of soil structure at the pile surface,which is particularly pronounced for higher initial soil structure ratios.Minimal variation was observed in the three principal stresses and shear stress on the cone side surface as the angle increased from 18°to 60°,except for a slight reduction in EPWP.展开更多
In this paper,a novel method for investigating the particle-crushing behavior of breeding particles in a fusion blanket is proposed.The fractal theory and Weibull distribution are combined to establish a theoretical m...In this paper,a novel method for investigating the particle-crushing behavior of breeding particles in a fusion blanket is proposed.The fractal theory and Weibull distribution are combined to establish a theoretical model,and its validity was verified using a simple impact test.A crushable discrete element method(DEM)framework is built based on the previously established theoretical model.The tensile strength,which considers the fractal theory,size effect,and Weibull variation,was assigned to each generated particle.The assigned strength is then used for crush detection by comparing it with its maximum tensile stress.Mass conservation is ensured by inserting a series of sub-particles whose total mass was equal to the quality loss.Based on the crushable DEM framework,a numerical simulation of the crushing behavior of a pebble bed with hollow cylindrical geometry under a uniaxial compression test was performed.The results of this investigation showed that the particle withstands the external load by contact and sliding at the beginning of the compression process,and the results confirmed that crushing can be considered an important method of resisting the increasing external load.A relatively regular particle arrangement aids in resisting the load and reduces the occurrence of particle crushing.However,a limit exists to the promotion of resistance.When the strain increases beyond this limit,the distribution of the crushing position tends to be isotropic over the entire pebble bed.The theoretical model and crushable DEM framework provide a new method for exploring the pebble bed in a fusion reactor,considering particle crushing.展开更多
Convex feasibility problems are widely used in image reconstruction, sparse signal recovery, and other areas. This paper is devoted to considering a class of convex feasibility problem arising from sparse signal recov...Convex feasibility problems are widely used in image reconstruction, sparse signal recovery, and other areas. This paper is devoted to considering a class of convex feasibility problem arising from sparse signal recovery. We first derive the projection formulas for a vector onto the feasible sets. The centralized circumcentered-reflection method is designed to solve the convex feasibility problem. Some numerical experiments demonstrate the feasibility and effectiveness of the proposed algorithm, showing superior performance compared to conventional alternating projection methods.展开更多
Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The t...Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The traditional thermal elastic-plastic finite element method(TEP-FEM)can accurately predict welding deformation.However,its efficiency is low because of the complex nonlinear transient computation,making it difficult to meet the needs of rapid engineering evaluation.To address this challenge,this study proposes an efficient prediction method for welding deformation in marine thin plate butt welds.This method is based on the coupled temperature gradient-thermal strain method(TG-TSM)that integrates inherent strain theory with a shell element finite element model.The proposed method first extracts the distribution pattern and characteristic value of welding-induced inherent strain through TEP-FEM analysis.This strain is then converted into the equivalent thermal load applied to the shell element model for rapid computation.The proposed method-particularly,the gradual temperature gradient-thermal strain method(GTG-TSM)-achieved improved computational efficiency and consistent precision.Furthermore,the proposed method required much less computation time than the traditional TEP-FEM.Thus,this study lays the foundation for future prediction of welding deformation in more complex marine thin plates.展开更多
To investigate the damage evolution caused by stress-driven and sub-critical crack propagation within the Beishan granite under multi-creep triaxial compressive conditions,the distributed optical fiber sensing and X-r...To investigate the damage evolution caused by stress-driven and sub-critical crack propagation within the Beishan granite under multi-creep triaxial compressive conditions,the distributed optical fiber sensing and X-ray computed tomography were combined to obtain the strain distribution over the sample surface and internal fractures of the samples.The Gini and skewness(G-S)coefficients were used to quantify strain localization during tests,where the Gini coefficient reflects the degree of clustering of elements with high strain values,i.e.,strain localization/delocalization.The strain localization-induced asymmetry of data distribution is quantified by the skewness coefficient.A precursor to granite failure is defined by the rapid and simultaneous increase of the G-S coefficients,which are calculated from strain increment,giving an earlier warning of failure by about 8%peak stress than those from absolute strain values.Moreover,the process of damage accumulation due to stress-driven crack propagation in Beishan granite is different at various confining pressures as the stress exceeds the crack initiation stress.Concretely,strain localization is continuous until brittle failure at higher confining pressure,while both strain localization and delocalization occur at lower confining pressure.Despite the different stress conditions,a similar statistical characteristic of strain localization during the creep stage is observed.The Gini coefficient increases,and the skewness coefficient decreases slightly as the creep stress is below 95%peak stress.When the accelerated strain localization begins,the Gini and skewness coefficients increase rapidly and simultaneously.展开更多
In this work,the Hierarchical Quadrature Element Method(HQEM)formulation of geometrically exact shells is proposed and applied for geometrically nonlinear analyses of both isotropic and laminated shells.The stress res...In this work,the Hierarchical Quadrature Element Method(HQEM)formulation of geometrically exact shells is proposed and applied for geometrically nonlinear analyses of both isotropic and laminated shells.The stress resultant formulation is developed within the HQEM framework,consequently significantly simplifying the computations of residual force and stiffness matrix.The present formulation inherently avoids shear and membrane locking,benefiting from its high-order approximation property.Furthermore,HQEM’s independent nodal distribution capability conveniently supports local p-refinement and flexibly facilitates mesh generation in various structural configurations through the combination of quadrilateral and triangular elements.Remarkably,in lateral buckling analysis,the HQEM outperforms the weak-form quadrilateral element(QEM)in accuracy with identical nodal degrees of freedom(three displacements and two rotations).Under high-load nonlinear response,the QEM exhibits a maximum relative deviation of approximately 9.5%from the reference,while the HQEM remains closely aligned with the benchmark results.In addition,for the cantilever beam under tip moment,HQEM produces virtually no out-of-plane deviation,compared to a slight deviation of 0.00001 with QEM,confirming its superior numerical reliability.In summary,the method demonstrates high accuracy,superior convergence,and robustness in handling large rotations and complex post-buckling behaviors across a series of benchmark problems.展开更多
Geological prospecting and the identification of adverse geological features are essential in tunnel construction,providing critical information to ensure safety and guide engineering decisions.As tunnel projects exte...Geological prospecting and the identification of adverse geological features are essential in tunnel construction,providing critical information to ensure safety and guide engineering decisions.As tunnel projects extend into deeper and more mountainous terrains,engineers face increasingly complex geological conditions,including high water pressure,intense geo-stress,elevated geothermal gradients,and active fault zones.These conditions pose substantial risks such as high-pressure water inrush,largescale collapses,and tunnel boring machine(TBM)blockages.Addressing these challenges requires advanced detection technologies capable of long-distance,high-precision,and intelligent assessments of adverse geology.This paper presents a comprehensive review of recent advancements in tunnel geological ahead prospecting methods.It summarizes the fundamental principles,technical maturity,key challenges,development trends,and real-world applications of various detection techniques.Airborne and semi-airborne geophysical methods enable large-scale reconnaissance for initial surveys in complex terrain.Tunnel-and borehole-based approaches offer high-resolution detection during excavation,including seismic ahead prospecting(SAP),TBM rock-breaking source seismic methods,fulltime-domain tunnel induced polarization(TIP),borehole electrical resistivity,and ground penetrating radar(GPR).To address scenarios involving multiple,coexisting adverse geologies,intelligent inversion and geological identification methods have been developed based on multi-source data fusion and artificial intelligence(AI)techniques.Overall,these advances significantly improve detection range,resolution,and geological characterization capabilities.The methods demonstrate strong adaptability to complex environments and provide reliable subsurface information,supporting safer and more efficient tunnel construction.展开更多
Many researchers have developed new calculation methods to analyze seismic slope stability problems, but the conventional pseudo-static method is still widely used in engineering design due to its simplicity. Based on...Many researchers have developed new calculation methods to analyze seismic slope stability problems, but the conventional pseudo-static method is still widely used in engineering design due to its simplicity. Based on the Technical Code for Building Slope Engineering（GB 50330-2013） of China and the Guidelines for Evaluating and Mitigating Seismic Hazards in California（SP117）, a comparative study on the pseudo-static method was performed. The results indicate that the largest difference between these two design codes lies in determination of the seismic equivalence reduction factor( f;). The GB 50330-2013 code specifies a single value for f;of 0.25. In SP117, numerous factors,such as magnitude and distance, are considered in determining f;. Two case studies show that the types of slope stability status evaluated by SP117 are in agreement with those evaluated by the seismic time-history stability analysis and Newmark displacement analysis. The factors of safety evaluated by SP117 can be used in practice for safe design. However, the factors of safety evaluated by GB 50330-2013 are risky for slope seismic design.展开更多
Stand age plays a crucial role in forest biomass estimation and carbon cycle modeling.Assessing the uncertainty of stand age prediction models and identifying the key driving factors in the modeling process have becom...Stand age plays a crucial role in forest biomass estimation and carbon cycle modeling.Assessing the uncertainty of stand age prediction models and identifying the key driving factors in the modeling process have become major challenges in forestry research.In this study,we selected the Shaanxi-Gansu-Ningxia region of Northeast China as the research area and utilized multi-source datasets from the summer of 2019 to extract information on spectral,textural,climatic,water balance,and stand characteristics.By integrating the Random Forest(RF)model with Monte Carlo(MC)simulation,we constructed six regression models based on different combina-tions of features and evaluated the uncertainty of each model.Furthermore,we investigated the driving factors influencing stand age modeling by analyzing the effects of different types of features on age inversion.Model performance and accuracy were assessed using the root mean square error(RMSE),mean absolute error(MAE),and the coefficient of determination(R^(2)),while the relative root mean square error(rRMSE)was employed to quantify model uncertainty.The results indicate that the scenarios with more obvious improve-ment in accuracy and effective reduction in uncertainty were Scenario 3 with the inclusion of climate and water balance information(RMSE=25.54 yr,MAE=18.03 yr,R^(2)=0.51,rRMSE=19.17%)and Scenario 5 with the inclusion of stand characterization informa-tion(RMSE=18.47 yr,MAE=13.05 yr,R^(2)=0.74,rRMSE=16.99%).Scenario 6,incorporating all feature types,achieved the highest accuracy(RMSE=17.60 yr,MAE=12.06 yr,R^(2)=0.77,rRMSE=14.19%).In this study,elevation,minimum temperature,and diameter at breast height(DBH)emerged as the key drivers of stand-age modeling.The proposed method can be used to identify drivers and to quantify uncertainty in stand-age estimation,providing a useful reference for improving model accuracy and uncertainty assessment.展开更多
Given the extensive utilization of cantilever retaining walls in construction and development projects,their optimal design and analysis with proper attention to seismic loads is a typical engineering problem.This res...Given the extensive utilization of cantilever retaining walls in construction and development projects,their optimal design and analysis with proper attention to seismic loads is a typical engineering problem.This research presents a new algorithm for pseudo-static analysis of retaining walls employing upper bound method.The algorithm can be utilized to design and check the external and internal stability of the wall based on the proposed mechanism.One of the main features of this algorithm is its ability to determine the critical condition of failure wedges,the minimum safety factor and maximum force acting on the wall,as well as the minimum weight of the wall,simultaneously,by effectively using the multi-objective optimization.The results obtained by the proposed failure mechanisms show that,while using the upper bound limit analysis approach,the active force should be maximized concurrent with optimizing the direction of the plane passing through the back of the heel.The present study also applies the proposed algorithm to determine the critical direction of the earthquake acceleration coefficient.The critical direction of earthquake acceleration coefficient is defined as the direction that maximizes the active force exerted on the wall and minimizes the safety factor for wall stability.The results obtained in this study are in good agreement with those of similar studies carried out based on the limit equilibrium method and finite element analysis.The critical failure mechanisms were determined via optimization with genetic algorithm.展开更多
This paper presents a procedure for assessing the reinforcement force of geosynthetics required for maintaining dynamic stability of a steep soil slope. Such a procedure is achieved with the use of the discretization ...This paper presents a procedure for assessing the reinforcement force of geosynthetics required for maintaining dynamic stability of a steep soil slope. Such a procedure is achieved with the use of the discretization technique and kinematic analysis of plasticity theory, i.e. discretization-based kinematic analysis. The discretization technique allows discretization of the analyzed slope into various components and generation of a kinematically admissible failure mechanism based on an associated flow rule.Accordingly, variations in soil properties including soil cohesion, internal friction angle and unit weight are accounted for with ease, while the conventional kinematic analysis fails to consider the changes in soil properties. The spatialetemporal effects of dynamic accelerations represented by primary and shear seismic waves are considered using the pseudo-dynamic approach. In the presence of geosynthetic reinforcement, tensile failure is discussed providing that the geosynthetics are installed with sufficient length. Equating the total rates of work done by external forces to the internal rates of work yields the upper bound solution of required reinforcement force, below which slopes fail. The reinforcement force is sought by optimizing the objective function with regard to independent variables, and presented in a normalized form. Pseudo-static analysis is a special case and hence readily transformed from pseudodynamic analysis. Comparisons of the pseudo-static/dynamic solutions calculated in this study are highlighted. Although the pseudo-static approach yields a conservative solution, its ability to give a reasonable result is substantiated for steep slopes. In order to provide a more meaningful solution to a stability analysis, the pseudo-dynamic approach is recommended due to considerations of spatial etemporal effect of earthquake input.展开更多
Based on the nonlinear Barton–Bandis(B–B)failure criterion,this study considers the system reliability of rock wedge stability under the pseudo-static seismic load.The failure probability(Pf)of the system is calcula...Based on the nonlinear Barton–Bandis(B–B)failure criterion,this study considers the system reliability of rock wedge stability under the pseudo-static seismic load.The failure probability(Pf)of the system is calculated based on the Monte−Carlo method when considering parameter correlation and variability.Parameter analysis and sensitivity analysis are carried out to explore the influence of parameters on reliability.The relationships among the failure probability,safety factor(Fs),and variation coefficient are explored,and then stability probability curves of the rock wedge under the pseudo-static seismic load are drawn.The results show that the parameter correlation of the B–B failure criterion has a significant influence on the failure probability,but correlation increases system reliability or decreases system reliability affected by other parameters.Under the pseudo-static seismic action,sliding on both planes is the main failure mode of wedge system.In addition,the parameters with relatively high sensitivity are two angles related to the joint dip.When the coefficient of variation is consistent,the probability of system failure is a function of the safety factor.展开更多
Modal parameters can accurately characterize the structural dynamic properties and assess the physical state of the structure.Therefore,it is particularly significant to identify the structural modal parameters accordi...Modal parameters can accurately characterize the structural dynamic properties and assess the physical state of the structure.Therefore,it is particularly significant to identify the structural modal parameters according to the monitoring data information in the structural health monitoring(SHM)system,so as to provide a scientific basis for structural damage identification and dynamic model modification.In view of this,this paper reviews methods for identifying structural modal parameters under environmental excitation and briefly describes how to identify structural damages based on the derived modal parameters.The paper primarily introduces data-driven modal parameter recognition methods(e.g.,time-domain,frequency-domain,and time-frequency-domain methods,etc.),briefly describes damage identification methods based on the variations of modal parameters(e.g.,natural frequency,modal shapes,and curvature modal shapes,etc.)and modal validation methods(e.g.,Stability Diagram and Modal Assurance Criterion,etc.).The current status of the application of artificial intelligence(AI)methods in the direction of modal parameter recognition and damage identification is further discussed.Based on the pre-vious analysis,the main development trends of structural modal parameter recognition and damage identification methods are given to provide scientific references for the optimized design and functional upgrading of SHM systems.展开更多
基金China Earthquake Administration Association Fund Under Grant No. 106060 and Institute of Engineering Mechanics Director Fund
文摘This paper describes a commonly used pseudo-static method in seismic resistant design of the cross section of underground structures. Based on dynamic theory and the vibration characteristics of underground structures, the sources of errors when using this method are analyzed. The traditional seismic motion loading approach is replaced by a method in which a one-dimensional soil layer response stress is differentiated and then converted into seismic live loads. To validate the improved method, a comparison of analytical results is conducted for internal forces under earthquake shaking of a typical shallow embedded box-shaped subway station structure using four methods： the response displacement method, finite element response acceleration method, the finite element dynamic analysis method and the improved pseudo-static calculation method. It is shown that the improved finite element pseudo-static method proposed in this paper provides an effective tool for the seismic design of underground structures. The evaluation yields results close to those obtained by the finite element dynamic analysis method, and shows that the improved finite element pseudo-static method provides a higher degree of precision.
基金supported in part by National Science Foundation of China (Contract NO. 41030742)Guangxi Science Foundation and the Program for Science & Technology of Henan Province in China (Grant No. 142300410200)
文摘traditional In this paper, two drawbacks pseudo-static method （vertical of the slice method） in the slope stability evaluation have been studied. First, the sliding mass is divided into vertical slices according to this method, which is irrational to some extent in the seismic design of slope. Second, only peak ground acceleration （PGA） is considered, and the effects of shaking frequency and duration on slope stability are neglected. And then, based on the theory of elastic wave and the summarized geological model, this paper put forwards an improved method of pseudo-method by using the theory of elastic wave and Hilbert-Huang transform. The improved pseudostatic method gives reasonable considerations to the time-frequency effects of seismic wave and its rationality has been verified by the shaking table test. This method can evaluate the safety of a slope, the happening time and the scale of landslides. At the same time, this method also can improve the high accuracy of the evaluation of the safety of the slope.
基金the financial support provided by MHRD,Govt.of IndiaCoal India Limited for providing financial assistance for the research(Project No.CIL/R&D/01/73/2021)the partial financial support provided by the Ministry of Education,Government of India,under SPARC project(Project No.P1207)。
文摘Sudden and unforeseen seismic failures of coal mine overburden(OB)dump slopes interrupt mining operations,cause loss of lives and delay the production of coal.Consideration of the spatial heterogeneity of OB dump materials is imperative for an adequate evaluation of the seismic stability of OB dump slopes.In this study,pseudo-static seismic stability analyses are carried out for an OB dump slope by considering the material parameters obtained from an insitu field investigation.Spatial heterogeneity is simulated through use of the random finite element method(RFEM)and the random limit equilibrium method(RLEM)and a comparative study is presented.Combinations of horizontal and vertical spatial correlation lengths were considered for simulating isotropic and anisotropic random fields within the OB dump slope.Seismic performances of the slope have been reported through the probability of failure and reliability index.It was observed that the RLEM approach overestimates failure probability(P_(f))by considering seismic stability with spatial heterogeneity.The P_(f)was observed to increase with an increase in the coefficient of variation of friction angle of the dump materials.Further,it was inferred that the RLEM approach may not be adequately applicable for assessing the seismic stability of an OB dump slope for a horizontal seismic coefficient that is more than or equal to 0.1.
基金Supported in part by Natural Science Foundation of Guangxi(2023GXNSFAA026246)in part by the Central Government's Guide to Local Science and Technology Development Fund(GuikeZY23055044)in part by the National Natural Science Foundation of China(62363003)。
文摘In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to obtain the maximal positive definite solution of nonlinear matrix equation X+A^(*)X|^(-α)A=Q with the case 0<α≤1.Based on this method,a new iterative algorithm is developed,and its convergence proof is given.Finally,two numerical examples are provided to show the effectiveness of the proposed method.
基金supported by the Fuxing Nursing Research Foundation of Fudan University[FNF202352].
文摘Objectives This review aimed to systematically synthesize the available research on the disclosure of diagnosis and related issues in childhood cancer from the perspectives of healthcare professionals,with the goal of informing the optimization of disclosure processes and meeting the communication needs of affected families.Methods In accordance with the Joanna Briggs Institute(JBI)methodology for mixed methods systematic reviews,the convergent segregated approach was used in this review.Articles were retrieved from 11 databases,including PubMed,Web of Science,CINAHL,CENTRAL,Embase,Ovid/Medline,PsycINFO,PsycArticles,Scopus,ERIC,and China National Knowledge Infrastructure(CNKI).The quality of the selected articles was assessed using the Mixed Method Appraisal Tool(MMAT).The review protocol was registered on PROSPERO(CRD42024542746).Results A total of 21 studies from 10 countries were included.Their methodological quality was generally medium to high,with MMAT scores ranging from 60%to 100%.The synthesis yielded three core themes:1)the spectrum of professional and societal attitudes toward disclosure;2)the dynamic practices of navigating disclosure amid uncertainty,including timing and environment,stakeholders,and content of disclosure;and 3)factors influencing disclosure,including children’s,parental,healthcare professionals’,and socio-cultural factors.Conclusions This review synthesized the perspectives and experiences of healthcare professionals regarding disclosure in childhood cancer,highlighting the complexity and multidimensional nature of this process in clinical practice.Future research should further investigate the experiences and needs of children and their parents,explore cultural variations in disclosure practices,develop context-appropriate assessment tools,and construct multidimensional intervention strategies to enhance the humanistic care and professional effectiveness of the disclosure process.
基金supported by the National Natural Science Foundation of China(Grant Nos.12272393 and 52130905).
文摘As binary geological media,soil-rock mixtures(SRMs)exhibit a distinct gradational composition,leading to their unique mechanical behaviors.To appraise the stability of SRM slopes,it is essential to determine equivalent parameters of SRMs,which are typically obtained through experimental and numerical methods.In contrasted to other numerical methods,the numerical manifold method(NMM)is more effective in addressing SRM problems.This is because the high-precision regular mathematical meshes in NMM can be used without aligning with the soil-rock interfaces and boundaries of SRMs.In the current research,the equivalent strength parameters of SRMs,i.e.the equivalent cohesion ce and internal friction angleϕ_(e),are determined using NMM.Initially,an NMM triaxial numerical model is established and validated based on triaxial experiments.Subsequently,the soil and rock parameters are derived through parameter inversion.Moreover,the impacts of rock content,size,shape and rock blocks'major-axis orientation on ce andϕ_(e) of SRMs are thoroughly examined using the NMM triaxial numerical model.Additionally,a fitting function is proposed to linkϕ_(e) to the rock content and size of SRMs.When other influencing factors are fixed,the above fitting model leads to the following conclusions:(1)the predictedϕ_(e) of SRMs increase with the increase of rock content;and(2)SRM samples with smaller rocks display a higher predictedϕ_(e).
文摘The Good Wife is an American TV series that focuses on women’s independence,politics,and law.The drama has been remade in China,Japan,and South Korea.This research aims to use Nida’s Functional Equivalence Theory to analyze the methods of its English-to-Chinese subtitle translation by considering social,cultural,and historic backgrounds between China and America.After data collection and case analysis,the study found that:(1)Five major translation methods are adopted in the subtitle translation of The Good Wife.They are free translation,variation,literal translation,addition,and omission.Among them,free translation is the most frequently used,while omission is used least.(2)The subtitle translation of films and TV series is limited by time and space restrictions,social-cultural differences,and other factors.When translating,translators should try to use humorous words,euphemism,intonation,and other ways,and combine different methods such as literal translation,free translation,variation,addition,omission,and other methods to seek equivalence both in the meaning and function of subtitles under the guidance of Functional Equivalence Theory.
基金support from the National Natural Science Foundation of China(Grant No.42407256)the State Key Laboratory of Hydraulics and Mountain River Engineering,China(Grant No.SKHL2113)the Sichuan Science and Technology Program(Grant No.2024YFHZ0341).
文摘This paper develops a semi-analytical solution for pile penetration in natural soft clays using the strain path method(SPM).The stress-strain behavior of soils is characterized by the S-CLAY1S model,which can capture the anisotropic evolution and destructuring nature of soft clays.By integrating the S-CLAY1S model into the theoretical framework of the SPM,a set of ordinary differential equations is formulated with respect to the vertical coordinate of soil particles.The distribution of excess pore water pressure(EPWP)following pile installation is approximated through one-dimensional(1D)radial integration around the pile shaft.The distribution of stresses and EPWP,along with the evolution of fabric anisotropy within the soil surrounding the pile,is presented to illustrate the response of pile penetration in natural soft clays.The proposed solution is validated against existing theoretical solutions using the SPM and cavity expansion method(CEM),along with experimental data.The findings demonstrate that the SPM reveals lower radial effective stresses and EPWP at the pile shaft than that of CEM.Pile penetration alters the soil's anisotropic properties,inducing rotational hardening and affecting post-installation stress distribution.Soil destructuration eliminates bonding among particles near the pile,resulting in a complete disruption of soil structure at the pile surface,which is particularly pronounced for higher initial soil structure ratios.Minimal variation was observed in the three principal stresses and shear stress on the cone side surface as the angle increased from 18°to 60°,except for a slight reduction in EPWP.
基金supported by Anhui Provincial Natural Science Foundation(2408085QA030)Natural Science Research Project of Anhui Educational Committee,China(2022AH050825)+3 种基金Medical Special Cultivation Project of Anhui University of Science and Technology(YZ2023H2C008)the Excellent Research and Innovation Team of Anhui Province,China(2022AH010052)the Scientific Research Foundation for High-level Talents of Anhui University of Science and Technology,China(2021yjrc51)Collaborative Innovation Program of Hefei Science Center,CAS,China(2019HSC-CIP006).
文摘In this paper,a novel method for investigating the particle-crushing behavior of breeding particles in a fusion blanket is proposed.The fractal theory and Weibull distribution are combined to establish a theoretical model,and its validity was verified using a simple impact test.A crushable discrete element method(DEM)framework is built based on the previously established theoretical model.The tensile strength,which considers the fractal theory,size effect,and Weibull variation,was assigned to each generated particle.The assigned strength is then used for crush detection by comparing it with its maximum tensile stress.Mass conservation is ensured by inserting a series of sub-particles whose total mass was equal to the quality loss.Based on the crushable DEM framework,a numerical simulation of the crushing behavior of a pebble bed with hollow cylindrical geometry under a uniaxial compression test was performed.The results of this investigation showed that the particle withstands the external load by contact and sliding at the beginning of the compression process,and the results confirmed that crushing can be considered an important method of resisting the increasing external load.A relatively regular particle arrangement aids in resisting the load and reduces the occurrence of particle crushing.However,a limit exists to the promotion of resistance.When the strain increases beyond this limit,the distribution of the crushing position tends to be isotropic over the entire pebble bed.The theoretical model and crushable DEM framework provide a new method for exploring the pebble bed in a fusion reactor,considering particle crushing.
基金Supported by the Natural Science Foundation of Guangxi Province(Grant Nos.2023GXNSFAA026067,2024GXN SFAA010521)the National Natural Science Foundation of China(Nos.12361079,12201149,12261026).
文摘Convex feasibility problems are widely used in image reconstruction, sparse signal recovery, and other areas. This paper is devoted to considering a class of convex feasibility problem arising from sparse signal recovery. We first derive the projection formulas for a vector onto the feasible sets. The centralized circumcentered-reflection method is designed to solve the convex feasibility problem. Some numerical experiments demonstrate the feasibility and effectiveness of the proposed algorithm, showing superior performance compared to conventional alternating projection methods.
基金Supported by the National Natural Science Foundation of China under Grant No.51975138the High-Tech Ship Scientific Research Project from the Ministry of Industry and Information Technology under Grant No.CJ05N20the National Defense Basic Research Project under Grant No.JCKY2023604C006.
文摘Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The traditional thermal elastic-plastic finite element method(TEP-FEM)can accurately predict welding deformation.However,its efficiency is low because of the complex nonlinear transient computation,making it difficult to meet the needs of rapid engineering evaluation.To address this challenge,this study proposes an efficient prediction method for welding deformation in marine thin plate butt welds.This method is based on the coupled temperature gradient-thermal strain method(TG-TSM)that integrates inherent strain theory with a shell element finite element model.The proposed method first extracts the distribution pattern and characteristic value of welding-induced inherent strain through TEP-FEM analysis.This strain is then converted into the equivalent thermal load applied to the shell element model for rapid computation.The proposed method-particularly,the gradual temperature gradient-thermal strain method(GTG-TSM)-achieved improved computational efficiency and consistent precision.Furthermore,the proposed method required much less computation time than the traditional TEP-FEM.Thus,this study lays the foundation for future prediction of welding deformation in more complex marine thin plates.
基金supported by the National Natural Science Foundation of China(Grant No.52339001).
文摘To investigate the damage evolution caused by stress-driven and sub-critical crack propagation within the Beishan granite under multi-creep triaxial compressive conditions,the distributed optical fiber sensing and X-ray computed tomography were combined to obtain the strain distribution over the sample surface and internal fractures of the samples.The Gini and skewness(G-S)coefficients were used to quantify strain localization during tests,where the Gini coefficient reflects the degree of clustering of elements with high strain values,i.e.,strain localization/delocalization.The strain localization-induced asymmetry of data distribution is quantified by the skewness coefficient.A precursor to granite failure is defined by the rapid and simultaneous increase of the G-S coefficients,which are calculated from strain increment,giving an earlier warning of failure by about 8%peak stress than those from absolute strain values.Moreover,the process of damage accumulation due to stress-driven crack propagation in Beishan granite is different at various confining pressures as the stress exceeds the crack initiation stress.Concretely,strain localization is continuous until brittle failure at higher confining pressure,while both strain localization and delocalization occur at lower confining pressure.Despite the different stress conditions,a similar statistical characteristic of strain localization during the creep stage is observed.The Gini coefficient increases,and the skewness coefficient decreases slightly as the creep stress is below 95%peak stress.When the accelerated strain localization begins,the Gini and skewness coefficients increase rapidly and simultaneously.
基金supported by the National Natural Science Foundation of China(Grant Nos.12472194,12002018,11972004,11772031,11402015).
文摘In this work,the Hierarchical Quadrature Element Method(HQEM)formulation of geometrically exact shells is proposed and applied for geometrically nonlinear analyses of both isotropic and laminated shells.The stress resultant formulation is developed within the HQEM framework,consequently significantly simplifying the computations of residual force and stiffness matrix.The present formulation inherently avoids shear and membrane locking,benefiting from its high-order approximation property.Furthermore,HQEM’s independent nodal distribution capability conveniently supports local p-refinement and flexibly facilitates mesh generation in various structural configurations through the combination of quadrilateral and triangular elements.Remarkably,in lateral buckling analysis,the HQEM outperforms the weak-form quadrilateral element(QEM)in accuracy with identical nodal degrees of freedom(three displacements and two rotations).Under high-load nonlinear response,the QEM exhibits a maximum relative deviation of approximately 9.5%from the reference,while the HQEM remains closely aligned with the benchmark results.In addition,for the cantilever beam under tip moment,HQEM produces virtually no out-of-plane deviation,compared to a slight deviation of 0.00001 with QEM,confirming its superior numerical reliability.In summary,the method demonstrates high accuracy,superior convergence,and robustness in handling large rotations and complex post-buckling behaviors across a series of benchmark problems.
基金supported by the National Natural Science Foundation of China(Grant Nos.52021005,52325904,and 51991391)。
文摘Geological prospecting and the identification of adverse geological features are essential in tunnel construction,providing critical information to ensure safety and guide engineering decisions.As tunnel projects extend into deeper and more mountainous terrains,engineers face increasingly complex geological conditions,including high water pressure,intense geo-stress,elevated geothermal gradients,and active fault zones.These conditions pose substantial risks such as high-pressure water inrush,largescale collapses,and tunnel boring machine(TBM)blockages.Addressing these challenges requires advanced detection technologies capable of long-distance,high-precision,and intelligent assessments of adverse geology.This paper presents a comprehensive review of recent advancements in tunnel geological ahead prospecting methods.It summarizes the fundamental principles,technical maturity,key challenges,development trends,and real-world applications of various detection techniques.Airborne and semi-airborne geophysical methods enable large-scale reconnaissance for initial surveys in complex terrain.Tunnel-and borehole-based approaches offer high-resolution detection during excavation,including seismic ahead prospecting(SAP),TBM rock-breaking source seismic methods,fulltime-domain tunnel induced polarization(TIP),borehole electrical resistivity,and ground penetrating radar(GPR).To address scenarios involving multiple,coexisting adverse geologies,intelligent inversion and geological identification methods have been developed based on multi-source data fusion and artificial intelligence(AI)techniques.Overall,these advances significantly improve detection range,resolution,and geological characterization capabilities.The methods demonstrate strong adaptability to complex environments and provide reliable subsurface information,supporting safer and more efficient tunnel construction.
基金supported by the National Key R&D Program of China(Grant No.2017YFC0404804)the National Natural Science Foundation of China(Grant No.51509019)
文摘Many researchers have developed new calculation methods to analyze seismic slope stability problems, but the conventional pseudo-static method is still widely used in engineering design due to its simplicity. Based on the Technical Code for Building Slope Engineering（GB 50330-2013） of China and the Guidelines for Evaluating and Mitigating Seismic Hazards in California（SP117）, a comparative study on the pseudo-static method was performed. The results indicate that the largest difference between these two design codes lies in determination of the seismic equivalence reduction factor( f;). The GB 50330-2013 code specifies a single value for f;of 0.25. In SP117, numerous factors,such as magnitude and distance, are considered in determining f;. Two case studies show that the types of slope stability status evaluated by SP117 are in agreement with those evaluated by the seismic time-history stability analysis and Newmark displacement analysis. The factors of safety evaluated by SP117 can be used in practice for safe design. However, the factors of safety evaluated by GB 50330-2013 are risky for slope seismic design.
基金Under the auspices of the Natural Science Foundation of China(No.32371875,32001249)。
文摘Stand age plays a crucial role in forest biomass estimation and carbon cycle modeling.Assessing the uncertainty of stand age prediction models and identifying the key driving factors in the modeling process have become major challenges in forestry research.In this study,we selected the Shaanxi-Gansu-Ningxia region of Northeast China as the research area and utilized multi-source datasets from the summer of 2019 to extract information on spectral,textural,climatic,water balance,and stand characteristics.By integrating the Random Forest(RF)model with Monte Carlo(MC)simulation,we constructed six regression models based on different combina-tions of features and evaluated the uncertainty of each model.Furthermore,we investigated the driving factors influencing stand age modeling by analyzing the effects of different types of features on age inversion.Model performance and accuracy were assessed using the root mean square error(RMSE),mean absolute error(MAE),and the coefficient of determination(R^(2)),while the relative root mean square error(rRMSE)was employed to quantify model uncertainty.The results indicate that the scenarios with more obvious improve-ment in accuracy and effective reduction in uncertainty were Scenario 3 with the inclusion of climate and water balance information(RMSE=25.54 yr,MAE=18.03 yr,R^(2)=0.51,rRMSE=19.17%)and Scenario 5 with the inclusion of stand characterization informa-tion(RMSE=18.47 yr,MAE=13.05 yr,R^(2)=0.74,rRMSE=16.99%).Scenario 6,incorporating all feature types,achieved the highest accuracy(RMSE=17.60 yr,MAE=12.06 yr,R^(2)=0.77,rRMSE=14.19%).In this study,elevation,minimum temperature,and diameter at breast height(DBH)emerged as the key drivers of stand-age modeling.The proposed method can be used to identify drivers and to quantify uncertainty in stand-age estimation,providing a useful reference for improving model accuracy and uncertainty assessment.
文摘Given the extensive utilization of cantilever retaining walls in construction and development projects,their optimal design and analysis with proper attention to seismic loads is a typical engineering problem.This research presents a new algorithm for pseudo-static analysis of retaining walls employing upper bound method.The algorithm can be utilized to design and check the external and internal stability of the wall based on the proposed mechanism.One of the main features of this algorithm is its ability to determine the critical condition of failure wedges,the minimum safety factor and maximum force acting on the wall,as well as the minimum weight of the wall,simultaneously,by effectively using the multi-objective optimization.The results obtained by the proposed failure mechanisms show that,while using the upper bound limit analysis approach,the active force should be maximized concurrent with optimizing the direction of the plane passing through the back of the heel.The present study also applies the proposed algorithm to determine the critical direction of the earthquake acceleration coefficient.The critical direction of earthquake acceleration coefficient is defined as the direction that maximizes the active force exerted on the wall and minimizes the safety factor for wall stability.The results obtained in this study are in good agreement with those of similar studies carried out based on the limit equilibrium method and finite element analysis.The critical failure mechanisms were determined via optimization with genetic algorithm.
基金financial support for the first author’s PhD program by the President’s Graduate Fellowship in Singapore
文摘This paper presents a procedure for assessing the reinforcement force of geosynthetics required for maintaining dynamic stability of a steep soil slope. Such a procedure is achieved with the use of the discretization technique and kinematic analysis of plasticity theory, i.e. discretization-based kinematic analysis. The discretization technique allows discretization of the analyzed slope into various components and generation of a kinematically admissible failure mechanism based on an associated flow rule.Accordingly, variations in soil properties including soil cohesion, internal friction angle and unit weight are accounted for with ease, while the conventional kinematic analysis fails to consider the changes in soil properties. The spatialetemporal effects of dynamic accelerations represented by primary and shear seismic waves are considered using the pseudo-dynamic approach. In the presence of geosynthetic reinforcement, tensile failure is discussed providing that the geosynthetics are installed with sufficient length. Equating the total rates of work done by external forces to the internal rates of work yields the upper bound solution of required reinforcement force, below which slopes fail. The reinforcement force is sought by optimizing the objective function with regard to independent variables, and presented in a normalized form. Pseudo-static analysis is a special case and hence readily transformed from pseudodynamic analysis. Comparisons of the pseudo-static/dynamic solutions calculated in this study are highlighted. Although the pseudo-static approach yields a conservative solution, its ability to give a reasonable result is substantiated for steep slopes. In order to provide a more meaningful solution to a stability analysis, the pseudo-dynamic approach is recommended due to considerations of spatial etemporal effect of earthquake input.
基金Project(51878668)supported by the National Natural Science Foundation of ChinaProjects(2017-122-058,2018-123-040)supported by the Guizhou Provincial Department of Transportation Foundation,ChinaProject([2018]2815)supported by the Guizhou Provincial Department of Science and Technology Foundation,China。
文摘Based on the nonlinear Barton–Bandis(B–B)failure criterion,this study considers the system reliability of rock wedge stability under the pseudo-static seismic load.The failure probability(Pf)of the system is calculated based on the Monte−Carlo method when considering parameter correlation and variability.Parameter analysis and sensitivity analysis are carried out to explore the influence of parameters on reliability.The relationships among the failure probability,safety factor(Fs),and variation coefficient are explored,and then stability probability curves of the rock wedge under the pseudo-static seismic load are drawn.The results show that the parameter correlation of the B–B failure criterion has a significant influence on the failure probability,but correlation increases system reliability or decreases system reliability affected by other parameters.Under the pseudo-static seismic action,sliding on both planes is the main failure mode of wedge system.In addition,the parameters with relatively high sensitivity are two angles related to the joint dip.When the coefficient of variation is consistent,the probability of system failure is a function of the safety factor.
基金supported by the Innovation Foundation of Provincial Education Department of Gansu(2024B-005)the Gansu Province National Science Foundation(22YF7GA182)the Fundamental Research Funds for the Central Universities(No.lzujbky2022-kb01)。
文摘Modal parameters can accurately characterize the structural dynamic properties and assess the physical state of the structure.Therefore,it is particularly significant to identify the structural modal parameters according to the monitoring data information in the structural health monitoring(SHM)system,so as to provide a scientific basis for structural damage identification and dynamic model modification.In view of this,this paper reviews methods for identifying structural modal parameters under environmental excitation and briefly describes how to identify structural damages based on the derived modal parameters.The paper primarily introduces data-driven modal parameter recognition methods(e.g.,time-domain,frequency-domain,and time-frequency-domain methods,etc.),briefly describes damage identification methods based on the variations of modal parameters(e.g.,natural frequency,modal shapes,and curvature modal shapes,etc.)and modal validation methods(e.g.,Stability Diagram and Modal Assurance Criterion,etc.).The current status of the application of artificial intelligence(AI)methods in the direction of modal parameter recognition and damage identification is further discussed.Based on the pre-vious analysis,the main development trends of structural modal parameter recognition and damage identification methods are given to provide scientific references for the optimized design and functional upgrading of SHM systems.
