Predicting the thermal conductivity of polymeric composites filled with BN sheets is helpful for fabricating ther-mal management material.In this study,a co-training style semi-supervised artificial neural network mod...Predicting the thermal conductivity of polymeric composites filled with BN sheets is helpful for fabricating ther-mal management material.In this study,a co-training style semi-supervised artificial neural network model(Co-ANN)was proposed to take advantage of unlabeled data to refine the prediction.The thermal conductivity of polymer matrix,the diameter,aspect ratio,and volume fraction of the BN sheets are considered as the input variables of the thermal conduction model.Two artificial neural network(ANN)learners with different archi-tecture will label the unlabeled examples.Through estimating the labeling confidence from the mathematical influence and thermal conductive behavior,the most confidently labeled example will be used to augment the training dataset.The lower limit of the labeling confidence is introduced to reduce the data noise.After learn-ing the augmented training information,a combination of two ANN regressors will construct the final Co-ANN thermal conduction model.Compared to other models,the newly developed Co-ANN thermal conduction model remarkably improves the thermal conductivity prediction and exhibits the best accuracy and generalization per-formance.The proposed method shows a vast potential in thermal conductive material design.展开更多
Creating conditions to implement equilibrium processes of damage accumulation under a predictable scenario enables control over the failure of structural elements in critical states.It improves safety and reduces the ...Creating conditions to implement equilibrium processes of damage accumulation under a predictable scenario enables control over the failure of structural elements in critical states.It improves safety and reduces the probability of catastrophic behavior in case of accidents.Equilibrium damage accumulation in some cases leads to a falling part(called a postcritical stage)on the material’s stress-strain curve.It must be taken into account to assess the strength and deformation limits of composite structures.Digital image correlation method,acoustic emission(AE)signals recording,and optical microscopy were used in this paper to study the deformation and failure processes of an orthogonal-layup composite during tension in various directions to orthotropy axes.An elastic-plastic deformation model was proposed for the composite in a plane stress condition.The evolution of strain fields and neck formation were analyzed.The staging of the postcritical deformation process was described.AE signals obtained during tests were studied;characteristic damage types of a material were defined.The rationality and necessity of polymer composites’postcritical deformation stage taken into account in refined strength analysis of structures were concluded.展开更多
Power cables are important pieces of equipment for energy transmission,but achieving a good balance between flame retardancy and mechanical properties of cable sheaths remains a challenge.In this work,a novel intumesc...Power cables are important pieces of equipment for energy transmission,but achieving a good balance between flame retardancy and mechanical properties of cable sheaths remains a challenge.In this work,a novel intumescent flame retardant(IFR)system containing silicone-containing macromolecular charring agent(Si-MCA)and ammonium polyphosphate(APP)was designed to synergistically improve the flame retardancy and mechanical properties of ethylene-butyl acrylate copolymer(EBA)composites.The optimal mass ratio of APP/Si-MCA was 3/1 in EBA composites(EBA/APP-Si-31),corresponding to the best flame retardancy with 31.2% of limited oxygen index(LOI),V-0 rating in UL-94 vertical burning test,and 76.4%reduction on the peak of heat release rate(PHRR)in cone calorimeter test.The enhancement mechanism was attributed to the synergistic effect of APP/Si-MCA during combustion,including the radical-trapping effect,the dilution effect of non-flammable gases,and the barrier effect of the intumescent char layer.Meanwhile,the tensile results indicated that EBA/APP-Si-31 also exhibited good mechanical properties with the addition of maleic anhydride-grafted polyethylene(PE-g-MA)as the compatibilizer.Thus,the APP/Si-MCA combination is an effective IFRs system for preparing high-performance EBA composites,and it will promote their applications as cable sheath materials.展开更多
To address the poor mechanical properties of polydimethylsiloxane(PDMS)and enhance the understanding of the reinforcement mechanisms of aerogel network structures in rubber matrices,this study reinforced PDMS using an...To address the poor mechanical properties of polydimethylsiloxane(PDMS)and enhance the understanding of the reinforcement mechanisms of aerogel network structures in rubber matrices,this study reinforced PDMS using an ordered interconnected three-dimensional montmorillonite(MMT)aerogel network.The average pore diameter of the aerogels was successfully reduced from 11.53μm to 2.51μm by adjusting the ratio of poly(vinyl alcohol)(PVA)to MMT via directional freezing.Changes in the aerogel network were observed in field emission scanning electron microscope(FESEM)images.After vacuum impregnation,the aerogel network structure of the composites was observed using FESEM.Tensile tests indicated that as the pore diameter decreased,the elongation at break of the composites first increased to a peak of329.61%before decreasing,while the tensile strength and Young's modulus continuously increased to their maximum values of 6.29 MPa and24.67 MPa,respectively.Meanwhile,FESEM images of the tensile cracks and fracture surfaces showed that with a reduction in aerogel pore diameter,the degrees of crack deflection and interfacial debonding increased,presenting a rougher fracture surface.These phenomena enable the composites to dissipate substantial energy during tension,thus effectively improving the mechanical strength of the composites.The present work elucidates the bearing of ordered three-dimensional aerogel network structures on the performance of rubber matrices and provides crucial theoretical insights and technical guidance for the creation and optimization of high-performance PDMS-based composites.展开更多
A conductive polymeric composite containing in situ ultra-fine metal particles is prepared by melt blending. Incorporation of elastomeric nano-particles and carbon nanotubes hinders the coalescing of metal particles a...A conductive polymeric composite containing in situ ultra-fine metal particles is prepared by melt blending. Incorporation of elastomeric nano-particles and carbon nanotubes hinders the coalescing of metal particles and causes a shift to the breakup direction in the breakup/coalescence equilibrium of metal particles. The prime metal particles （about 26 μm） are in situ converted into the ultra-fine metal particles （UFMP, about 932 nm）. The network of carbon nanotubes has been improved due to in situ ultra-fine metal particles and the percolation threshold of the composite with 1.96 vol% UFMP is only 0.25 vol% carbon nanotubes.展开更多
The service life and properties of Carbon fiber reinforced polycarbonate (CF/PC) composites are seriously affected by ultraviolet radiation from outdoor exposure during aging. In this work, the changes of structure an...The service life and properties of Carbon fiber reinforced polycarbonate (CF/PC) composites are seriously affected by ultraviolet radiation from outdoor exposure during aging. In this work, the changes of structure and solid particle erosion resistance for CF/PC composites after ultraviolet irradiation were studied. It was shown that ultraviolet irradiation causes photo-oxygen aging and photo-fries re-arrangement of the composite, and the result was confirmed by FTIR. We correlated the solid particle erosion resistance with aging time, and found that the solid particle erosion resistance of CF/PC composites greatly decreased by UVB irradiation during 15 hours. Furthermore, the eroded material surface was analyzed using scanning electron microscope (SEM). It suggests that ultraviolet aging leads to plasticization and degradation, resulting in reduction of erosion resistance of the composite.展开更多
The rapid development of aerospace weapons and equipment,wireless base stations and 5G communication technologies has put forward newer and higher requirements for the comprehensive performances of polymer-based elect...The rapid development of aerospace weapons and equipment,wireless base stations and 5G communication technologies has put forward newer and higher requirements for the comprehensive performances of polymer-based electromagnetic interference(EMI)shielding composites.However,most of currently prepared polymer-based EMI shielding composites are still difficult to combine high performance and multi-functionality.In response to this,based on the research works of relevant researchers as well as our research group,three possible directions to break through the above bottlenecks are proposed,including construction of efficient conductive networks,optimization of multi-interfaces for lightweight and multifunction compatibility design.The future development trends in three directions are prospected,and it is hoped to provide certain theoretical basis and technical guidance for the preparation,research and development of polymer-based EMI shielding composites.展开更多
Rapid development of energy,electrical and electronic technologies has put forward higher requirements for the thermal conductivities of polymers and their composites.However,the thermal conductivity coefficient(λ)va...Rapid development of energy,electrical and electronic technologies has put forward higher requirements for the thermal conductivities of polymers and their composites.However,the thermal conductivity coefficient(λ)values of prepared thermally conductive polymer composites are still difficult to achieve expectations,which has become the bottleneck in the fields of thermally conductive polymer composites.Aimed at that,based on the accumulation of the previous research works by related researchers and our research group,this paper proposes three possible directions for breaking through the bottlenecks:(1)preparing and synthesizing intrinsically thermally conductive polymers,(2)reducing the interfacial thermal resistance in thermally conductive polymer composites,and(3)establishing suitable thermal conduction models and studying inner thermal conduction mechanism to guide experimental optimization.Also,the future development trends of the three above-mentioned directions are foreseen,hoping to provide certain basis and guidance for the preparation,researches and development of thermally conductive polymers and their composites.展开更多
With the widespread application of electronic communication technology,the resulting electromagnetic radiation pollution has been significantly increased.Metal matrix electromagnetic interference(EMI)shielding materia...With the widespread application of electronic communication technology,the resulting electromagnetic radiation pollution has been significantly increased.Metal matrix electromagnetic interference(EMI)shielding materials have disadvantages such as high density,easy corrosion,difficult processing and high price,etc.Polymer matrix EMI shielding composites possess light weight,corrosion resistance and easy processing.However,the current polymer matrix composites present relatively low electrical conductivity and poor EMI shielding performance.This review firstly discusses the key concept,loss mechanism and test method of EMI shielding.Then the current development status of EMI shielding materials is summarized,and the research progress of polymer matrix EMI shielding composites with different structures is illustrated,especially for their preparation methods and evaluation.Finally,the corresponding key scientific and technical problems are proposed,and their development trend is also prospected.展开更多
Composites that can rapidly self-healing their structure and function at room temperature have broad application prospects.However,in view of the complexity of composite structure and composition,its self-heal is faci...Composites that can rapidly self-healing their structure and function at room temperature have broad application prospects.However,in view of the complexity of composite structure and composition,its self-heal is facing challenges.In this article,supramolecular effect is proposed to repair the multistage structure,mechanical and thermal properties of composite materials.A stiff and tough supramolecular frameworks of 2-[[(butylamino)carbonyl]oxy]ethyl ester(PBA)–polydimethylsiloxane(PDMS)were established using a chain extender with double amide bonds in a side chain to extend prepolymers through copolymerization.Then,by introducing the copolymer into a folded graphene film(FGf),a highly thermally conductive composite of PBA–PDMS/FGf with self-healing capacity was fabricated.The ratio of crosslinking and hydrogen bonding was optimized to ensure that PBA–PDMS could completely self-heal at room temperature in 10 min.Additionally,PBA–PDMS/FGf exhibits a high tensile strength of 2.23±0.15 MPa at break and high thermal conductivity of 13±0.2 W m^(−1)K^(−1);of which the self-healing efficiencies were 100%and 98.65%at room temperature for tensile strength and thermal conductivity,respectively.The excellent self-healing performance comes from the efficient supramolecular interaction between polymer molecules,as well as polymer molecule and graphene.This kind of thermal conductive self-healing composite has important application prospects in the heat dissipation field of next generation electronic devices in the future.展开更多
Theoretical and empirical models for predicting the thermal conductivity of polymer composites were summarized since the 1920s.The effects of particle shape,filler amount,dispersion state of fillers,and interfacial th...Theoretical and empirical models for predicting the thermal conductivity of polymer composites were summarized since the 1920s.The effects of particle shape,filler amount,dispersion state of fillers,and interfacial thermal barrier on the thermal conductivity of filled polymer composites were investigated,and the agreement of experimental data with theoretical models in literatures was discussed.Silica with high thermal conductivity was chosen to mix with polyvinyl-acetate （EVA） copolymer to prepare SiO2/EVA co-films.Experimental data of the co-films＇ thermal conductivity were compared with some classical theoretical and empirical models.The results show that Agari＇s model,the mixed model,and the percolation model can predict well the thermal conductivity of SiO2/EVA co-films.展开更多
The integration and miniaturization of chips lead to inevitable overheating and increasing electromagnetic interference (EMI) problems, which threaten the performance, stability, and lifetime of electroniccomponents. ...The integration and miniaturization of chips lead to inevitable overheating and increasing electromagnetic interference (EMI) problems, which threaten the performance, stability, and lifetime of electroniccomponents. Therefore, it is important to improve the heat dissipation and EMI shielding performancein device packaging for the steady operation of electronic products. In recent years, due to its intrinsic superior thermal conductivity, proper electrical conductivity, light-weight, and structural adjustability,graphene has been widely used as high thermal and conductive fillers incorporated in the polymer matrix to improve the thermal conductivity and electrical conductivity of composites. This review concludesthe recent development of graphene/polymer composites by using graphene as fillers to improve thethermal conductivity and EMI shielding effectiveness (EMI SE). The structure of graphene embedded inthe composites varies from zero-dimension (0D), one-dimension (1D) to two-dimensions (2D). Moreover,highly thermally and electrically conductive fillers with different dimensions were also modified on thegraphene to improve the composite performance. Finally, this review also makes prospects for the development trend of graphene/polymer composites with high thermal conductivity and EMI SE in the future.展开更多
The application of natural fibers as reinforcement in composite material has increased due to environmental concerns,low cost,degradability and health concerns.The purpose of this study is to identify the best type of...The application of natural fibers as reinforcement in composite material has increased due to environmental concerns,low cost,degradability and health concerns.The purpose of this study is to identify the best type of bamboo fibers to be used as reinforcement for kenaf(K)/bamboo hybrid composite.There were three types of bamboo fibers evaluated in this study which include bamboo mat(B),bamboo fabric(BF)and bamboo powder(BP).Chemical composition of B,BF,BP and K fibers were analyzed in this study.The effect of different types of bamboo fibers on tensile,impact,and morphological properties were investigated.The B/epoxy composites displayed the highest tensile strength(53.03 MPa)while K/epoxy composite had the highest tensile modulus(4.71 GPa).Scanning electron micrographs of B/epoxy composites displayed better fiber/matrix interfacial bonding in comparison to other studied composites.Results showed that impact strength of BF-based composite was highest(45.70 J/m).In conclusion,the tensile strength of B/epoxy composite is superior to the other bamboo reinforced composites and will be further evaluated in the next study.展开更多
Epoxy-based nano-composites can be ideal electromagnetic interference(EMI)-shielding materials owing to their lightness,chemical inertness,and mechanical durability.However,poor conductivity and brittleness of the epo...Epoxy-based nano-composites can be ideal electromagnetic interference(EMI)-shielding materials owing to their lightness,chemical inertness,and mechanical durability.However,poor conductivity and brittleness of the epoxy resin are challenges for fast-growing portable and flexible EMI-shielding applications,such as smart wristband,medical cloth,aerospace,and military equipment.In this study,we explored hybrid nanofillers of single-walled carbon nanotubes(SWCNT)/reduced graphene oxide(rGO)as conductive inks and polyester fabrics(PFs)as a substrate for flexible EMI-shielding composites.The highest electrical conductivity and fracture toughness of the SWCNT/rGO/PF/epoxy composites were 30.2 S m^(−1)and 38.5 MPa m^(1/2),which are~270 and 65%enhancement over those of the composites without SWCNTs,respectively.Excellent mechanical durability was demonstrated by stable electrical conductivity retention during 1000 cycles of bending test.An EMI-shielding effectiveness of~41 dB in the X-band frequency of 8.2-12.4 GHz with a thickness of 0.6 mm was obtained with an EM absorption-dominant behavior over a 0.7 absorption coefficient.These results are attributed to the hierarchical architecture of the macroscale PF skeleton and nanoscale SWCNT/rGO networks,leading to superior EMI-shielding performance.We believe that this approach provides highly flexible and robust EMI-shielding composites for next-generation wearable electronic devices.展开更多
Photoconductive properties of photodiodes based on composites of CuS nanoparticles and Poly[2-methoxy,5- （2＇-ethylhexyloxy）-p-phenylenevlnylene] （MEH-PPV） are investigated. By comparing composite devices with dif...Photoconductive properties of photodiodes based on composites of CuS nanoparticles and Poly[2-methoxy,5- （2＇-ethylhexyloxy）-p-phenylenevlnylene] （MEH-PPV） are investigated. By comparing composite devices with different MEH-PPV：CuS weight ratios of l：l （D2-1）, 1：1.25 （D2-2）, 1：2.5 （132-3） and 1：5 （D2-4）, it is found that the device D2 3 exhibited the best performance： the short-circuit current density of 17μA/cm^2 with the light intensity of 16.7mW/cm^2, the highest open-circuit voltage of 0,83 V, and the photosensitivity of 132 at reverse bias of - 1 V. The photosensitivity is improved by a factor of 5 compared with the undoped MEH-PPV device.展开更多
The ceramifiable polymer composite of MgO-Al_(2)O_(3)-SiO_(2)/boron phenolic resin(MAS/BPF)with 40wt%of inorganic fillers was calcined at 1200℃for different time to promote ceramification of ceramifiable composite an...The ceramifiable polymer composite of MgO-Al_(2)O_(3)-SiO_(2)/boron phenolic resin(MAS/BPF)with 40wt%of inorganic fillers was calcined at 1200℃for different time to promote ceramification of ceramifiable composite and improve heat resistance.The effects of different calcine time on the macroscopical morphology,mass loss,phase evolution,microstructure and chemical bond evolution of MAS/BPF composites were characterized by XRD,XPS,and SEM analyses.The experimental results reveal that the increase of calcine time result in the fewer holes,relatively denser and smoother top layer of MAS/BPF composites and protect the interior from deeper decomposition.The final residues of composites are amorphous carbon and C-O-Si-Al-Mg ceramic.And MAS/BPF composites show excellent mass stability,low shrinkage and self-supporting features after 2 h holding compared with BPF composites without 40wt%of inorganic fillers.展开更多
The high fire safety of polymer nanocomposites is being pursued by research institutions around the world.In addition to intrinsic flame retardancy strategy,the additive-type flame retardants have attracted increasing...The high fire safety of polymer nanocomposites is being pursued by research institutions around the world.In addition to intrinsic flame retardancy strategy,the additive-type flame retardants have attracted increasing attention due to low commercial cost and easy fabrication craft.However,traditional additive-type flame retardants usually need high addition amount to achieve a desirable effect which causes many side-effects on the overall performance of polymer materials,such as deteriorated mechanical property and processability.At present two-dimensional(2D)nanomaterials have also been applied to reduce the fire hazards of polymer(nano)composites with the coupling of barrier function and catalysis as well as carbonization effect.Even though most research work mainly focus on graphene-based flame retardants,more emerging two-dimensional nanomaterials are taking away research attention,due to their complementary and unique properties,mainly including hexagonal boron nitride(h-BN),molybdenum disulfide(MoS2),metal organic frameworks(MOF),carbon nitride(CN),titanium carbide(MXene)and black phosphorene(BP).In this review,except for graphene,the flame retardant mechanism involving different layered nanomaterials are also reviewed.Meanwhile,the functionalization method and flame retardancy effect of different layered nanomaterials are emphatically discussed for offering an effective reference to solve the fire hazards of polymer materials.Moreover,this work objectively evaluates the practical significance of polymer/layered nanomaterials composites for industrial application.展开更多
Polymer matrix composites(PMC)are extensively been used in many engineering applications.Various natural fibers have emerged as potential replacements to synthetic fibers as reinforcing materials composites owing to t...Polymer matrix composites(PMC)are extensively been used in many engineering applications.Various natural fibers have emerged as potential replacements to synthetic fibers as reinforcing materials composites owing to their fairly better mechanical properties,low cost,environment friendliness and biodegradability.Selection of appropriate constituents of composites for a particular application is a tedious task for a designer/engineer.Impact loading has emerged as the serious threat for the composites used in structural or secondary structural application and demands the usage of appropriate fiber and matrix combination to enhance the energy absorption and mitigate the failure.The objective of the present review is to explore the composite with various fiber and matrix combination used for impact applications,identify the gap in the literature and suggest the potential naturally available fiber and matrix combination of composites for future work in the field of impact loading.The novelty of the present study lies in exploring the combination of naturally available fiber and matrix combination which can help in better energy absorption and mitigate the failure when subjected to impact loading.In addition,the application of multi attributes decision making(MADM)tools is demonstrated for selection of fiber and matrix materials which can serve as a benchmark study for the researchers in future.展开更多
An innovational method that poly(styrene-co-maleic anhydride)(SMA),a compatibilizer of immiscible nylon6/polystyrene(PA6/PS) blends,was first reacted with carbon black(CB) and then blended with PA6/PS,has been employe...An innovational method that poly(styrene-co-maleic anhydride)(SMA),a compatibilizer of immiscible nylon6/polystyrene(PA6/PS) blends,was first reacted with carbon black(CB) and then blended with PA6/PS,has been employed to prepare the PA6/PS/(SMA-CB) composites of which CB localized at the interface.In PA6/PS/CB blends,CB was found to preferentially localize in the PA6 phase.However,in the PA6/PS/(SMA-CB) blends,it was found that CB particles can be induced by SMA to localize at the interface.The electrical porperties of PA6/PS/(SMA-CB) composites were investigated.The results showed that the composites exhibited distinct triple percolation behavior,i.e.the percolation is governed by the percolation of CB in SMA phase,the continuity of SMA-CB at the interface and the continuity of PA6/PS interface.The percolation threshold of PA6/PS/(SMA-CB) was only 0.15 wt%,which is much lower than that of PA6/PS/CB.Moreover,the PTC(positive temperature coefficient) intensity of PA6/PS/(SMA-CB) composites was stronger than that of PA6/PS/CB and the negative temperature coefficient(NTC) effect was eliminated.The electrical properties of PA6/PS/(SMA-CB) were explained in terms of its special interface morphology:SMA and CB localize at interphase to form the conductive pathways.展开更多
基金The research was financially supported by the National Natural Sci-ence Foundation of China(Nos.51776079 and 51736004).
文摘Predicting the thermal conductivity of polymeric composites filled with BN sheets is helpful for fabricating ther-mal management material.In this study,a co-training style semi-supervised artificial neural network model(Co-ANN)was proposed to take advantage of unlabeled data to refine the prediction.The thermal conductivity of polymer matrix,the diameter,aspect ratio,and volume fraction of the BN sheets are considered as the input variables of the thermal conduction model.Two artificial neural network(ANN)learners with different archi-tecture will label the unlabeled examples.Through estimating the labeling confidence from the mathematical influence and thermal conductive behavior,the most confidently labeled example will be used to augment the training dataset.The lower limit of the labeling confidence is introduced to reduce the data noise.After learn-ing the augmented training information,a combination of two ANN regressors will construct the final Co-ANN thermal conduction model.Compared to other models,the newly developed Co-ANN thermal conduction model remarkably improves the thermal conductivity prediction and exhibits the best accuracy and generalization per-formance.The proposed method shows a vast potential in thermal conductive material design.
基金This work was supported by the Russian Science Foundation(Grant No.22-19-00765)at the Perm National Research Polytechnic University.
文摘Creating conditions to implement equilibrium processes of damage accumulation under a predictable scenario enables control over the failure of structural elements in critical states.It improves safety and reduces the probability of catastrophic behavior in case of accidents.Equilibrium damage accumulation in some cases leads to a falling part(called a postcritical stage)on the material’s stress-strain curve.It must be taken into account to assess the strength and deformation limits of composite structures.Digital image correlation method,acoustic emission(AE)signals recording,and optical microscopy were used in this paper to study the deformation and failure processes of an orthogonal-layup composite during tension in various directions to orthotropy axes.An elastic-plastic deformation model was proposed for the composite in a plane stress condition.The evolution of strain fields and neck formation were analyzed.The staging of the postcritical deformation process was described.AE signals obtained during tests were studied;characteristic damage types of a material were defined.The rationality and necessity of polymer composites’postcritical deformation stage taken into account in refined strength analysis of structures were concluded.
基金supported by the National Natural Science Foundation of China(52473059)Taishan Scholar Constructive Engineering Foundation of Shandong Province(tsqn202103079)Key Research and Development Plan of Shandong Province(2024TSGC0264).
文摘Power cables are important pieces of equipment for energy transmission,but achieving a good balance between flame retardancy and mechanical properties of cable sheaths remains a challenge.In this work,a novel intumescent flame retardant(IFR)system containing silicone-containing macromolecular charring agent(Si-MCA)and ammonium polyphosphate(APP)was designed to synergistically improve the flame retardancy and mechanical properties of ethylene-butyl acrylate copolymer(EBA)composites.The optimal mass ratio of APP/Si-MCA was 3/1 in EBA composites(EBA/APP-Si-31),corresponding to the best flame retardancy with 31.2% of limited oxygen index(LOI),V-0 rating in UL-94 vertical burning test,and 76.4%reduction on the peak of heat release rate(PHRR)in cone calorimeter test.The enhancement mechanism was attributed to the synergistic effect of APP/Si-MCA during combustion,including the radical-trapping effect,the dilution effect of non-flammable gases,and the barrier effect of the intumescent char layer.Meanwhile,the tensile results indicated that EBA/APP-Si-31 also exhibited good mechanical properties with the addition of maleic anhydride-grafted polyethylene(PE-g-MA)as the compatibilizer.Thus,the APP/Si-MCA combination is an effective IFRs system for preparing high-performance EBA composites,and it will promote their applications as cable sheath materials.
基金financially supported by the National Natural Science Foundation of China(Nos.21876164 and U2030203)A Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions。
文摘To address the poor mechanical properties of polydimethylsiloxane(PDMS)and enhance the understanding of the reinforcement mechanisms of aerogel network structures in rubber matrices,this study reinforced PDMS using an ordered interconnected three-dimensional montmorillonite(MMT)aerogel network.The average pore diameter of the aerogels was successfully reduced from 11.53μm to 2.51μm by adjusting the ratio of poly(vinyl alcohol)(PVA)to MMT via directional freezing.Changes in the aerogel network were observed in field emission scanning electron microscope(FESEM)images.After vacuum impregnation,the aerogel network structure of the composites was observed using FESEM.Tensile tests indicated that as the pore diameter decreased,the elongation at break of the composites first increased to a peak of329.61%before decreasing,while the tensile strength and Young's modulus continuously increased to their maximum values of 6.29 MPa and24.67 MPa,respectively.Meanwhile,FESEM images of the tensile cracks and fracture surfaces showed that with a reduction in aerogel pore diameter,the degrees of crack deflection and interfacial debonding increased,presenting a rougher fracture surface.These phenomena enable the composites to dissipate substantial energy during tension,thus effectively improving the mechanical strength of the composites.The present work elucidates the bearing of ordered three-dimensional aerogel network structures on the performance of rubber matrices and provides crucial theoretical insights and technical guidance for the creation and optimization of high-performance PDMS-based composites.
文摘A conductive polymeric composite containing in situ ultra-fine metal particles is prepared by melt blending. Incorporation of elastomeric nano-particles and carbon nanotubes hinders the coalescing of metal particles and causes a shift to the breakup direction in the breakup/coalescence equilibrium of metal particles. The prime metal particles （about 26 μm） are in situ converted into the ultra-fine metal particles （UFMP, about 932 nm）. The network of carbon nanotubes has been improved due to in situ ultra-fine metal particles and the percolation threshold of the composite with 1.96 vol% UFMP is only 0.25 vol% carbon nanotubes.
文摘The service life and properties of Carbon fiber reinforced polycarbonate (CF/PC) composites are seriously affected by ultraviolet radiation from outdoor exposure during aging. In this work, the changes of structure and solid particle erosion resistance for CF/PC composites after ultraviolet irradiation were studied. It was shown that ultraviolet irradiation causes photo-oxygen aging and photo-fries re-arrangement of the composite, and the result was confirmed by FTIR. We correlated the solid particle erosion resistance with aging time, and found that the solid particle erosion resistance of CF/PC composites greatly decreased by UVB irradiation during 15 hours. Furthermore, the eroded material surface was analyzed using scanning electron microscope (SEM). It suggests that ultraviolet aging leads to plasticization and degradation, resulting in reduction of erosion resistance of the composite.
基金The authors are grateful for the supports from the National Natural Science Foundation of China(U21A2093)Y.L.Zhang would like to thank the Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University(CX2021107)+1 种基金This work is also financially supported by Polymer Electromagnetic Functional Materials Innovation Team of Shaanxi Sanqin ScholarsOpen access funding provided by Shanghai Jiao Tong University
文摘The rapid development of aerospace weapons and equipment,wireless base stations and 5G communication technologies has put forward newer and higher requirements for the comprehensive performances of polymer-based electromagnetic interference(EMI)shielding composites.However,most of currently prepared polymer-based EMI shielding composites are still difficult to combine high performance and multi-functionality.In response to this,based on the research works of relevant researchers as well as our research group,three possible directions to break through the above bottlenecks are proposed,including construction of efficient conductive networks,optimization of multi-interfaces for lightweight and multifunction compatibility design.The future development trends in three directions are prospected,and it is hoped to provide certain theoretical basis and technical guidance for the preparation,research and development of polymer-based EMI shielding composites.
基金National Natural Science Foundation of China(51773169 and 51973173)Guangdong Basic and Applied Basic Research Foundation(2019B1515120093)+2 种基金Technological Base Scientific Research ProjectsNatural Science Basic Research Plan for Distinguished Young Scholars in Shaanxi Province(2019JC-11)Polymer Electromagnetic Functional Materials Innovation Team of Shaanxi Sanqin Scholars.
文摘Rapid development of energy,electrical and electronic technologies has put forward higher requirements for the thermal conductivities of polymers and their composites.However,the thermal conductivity coefficient(λ)values of prepared thermally conductive polymer composites are still difficult to achieve expectations,which has become the bottleneck in the fields of thermally conductive polymer composites.Aimed at that,based on the accumulation of the previous research works by related researchers and our research group,this paper proposes three possible directions for breaking through the bottlenecks:(1)preparing and synthesizing intrinsically thermally conductive polymers,(2)reducing the interfacial thermal resistance in thermally conductive polymer composites,and(3)establishing suitable thermal conduction models and studying inner thermal conduction mechanism to guide experimental optimization.Also,the future development trends of the three above-mentioned directions are foreseen,hoping to provide certain basis and guidance for the preparation,researches and development of thermally conductive polymers and their composites.
基金funding from the Foundation of National Natural Science Foundation of China(51903145 and 51973173)Natural Science Basic Research Plan for Distinguished Young Scholars in Shaanxi Province of China(2019JC-11)+1 种基金Fundamental Research Funds for the Central Universities(D5000210627)This work is also financially supported by Polymer Electromagnetic Functional Materials Innovation Team of Shaanxi Sanqin Scholars.
文摘With the widespread application of electronic communication technology,the resulting electromagnetic radiation pollution has been significantly increased.Metal matrix electromagnetic interference(EMI)shielding materials have disadvantages such as high density,easy corrosion,difficult processing and high price,etc.Polymer matrix EMI shielding composites possess light weight,corrosion resistance and easy processing.However,the current polymer matrix composites present relatively low electrical conductivity and poor EMI shielding performance.This review firstly discusses the key concept,loss mechanism and test method of EMI shielding.Then the current development status of EMI shielding materials is summarized,and the research progress of polymer matrix EMI shielding composites with different structures is illustrated,especially for their preparation methods and evaluation.Finally,the corresponding key scientific and technical problems are proposed,and their development trend is also prospected.
基金financially supported by National Natural Science Foundation of China (Grant Nos. 52173078, 52130303, 51973158, 51803151, and 51973152)the Science Foundation for Distinguished Young Scholars in Tianjin (No. 19JCJQJC61700)Tianjin Postgraduate Scientific Research Innovation Project in 2019 (2019YJSB181)
文摘Composites that can rapidly self-healing their structure and function at room temperature have broad application prospects.However,in view of the complexity of composite structure and composition,its self-heal is facing challenges.In this article,supramolecular effect is proposed to repair the multistage structure,mechanical and thermal properties of composite materials.A stiff and tough supramolecular frameworks of 2-[[(butylamino)carbonyl]oxy]ethyl ester(PBA)–polydimethylsiloxane(PDMS)were established using a chain extender with double amide bonds in a side chain to extend prepolymers through copolymerization.Then,by introducing the copolymer into a folded graphene film(FGf),a highly thermally conductive composite of PBA–PDMS/FGf with self-healing capacity was fabricated.The ratio of crosslinking and hydrogen bonding was optimized to ensure that PBA–PDMS could completely self-heal at room temperature in 10 min.Additionally,PBA–PDMS/FGf exhibits a high tensile strength of 2.23±0.15 MPa at break and high thermal conductivity of 13±0.2 W m^(−1)K^(−1);of which the self-healing efficiencies were 100%and 98.65%at room temperature for tensile strength and thermal conductivity,respectively.The excellent self-healing performance comes from the efficient supramolecular interaction between polymer molecules,as well as polymer molecule and graphene.This kind of thermal conductive self-healing composite has important application prospects in the heat dissipation field of next generation electronic devices in the future.
基金supported by the High-Tech Research and Development Program of China (863 Program) (No.2006AA050203)
文摘Theoretical and empirical models for predicting the thermal conductivity of polymer composites were summarized since the 1920s.The effects of particle shape,filler amount,dispersion state of fillers,and interfacial thermal barrier on the thermal conductivity of filled polymer composites were investigated,and the agreement of experimental data with theoretical models in literatures was discussed.Silica with high thermal conductivity was chosen to mix with polyvinyl-acetate （EVA） copolymer to prepare SiO2/EVA co-films.Experimental data of the co-films＇ thermal conductivity were compared with some classical theoretical and empirical models.The results show that Agari＇s model,the mixed model,and the percolation model can predict well the thermal conductivity of SiO2/EVA co-films.
基金The authors are grateful for the financial support by the National Natural Science Foundation of China(No.52102055)China Postdoctoral Science Foundation(No.2020M681965)+6 种基金Key Research Program of the Chinese Academy of Sciences(No.ZDRW-CN-2019-3)the Project of the Chinese Academy of Sciences(Nos.XDC07030100,XDA22020602,KFZD-SW-409 and ZDKYYQ20200001)CAS Youth Innovation Promotion Association(No.2020301),Science and Technology Major Project of Ningbo(Nos.2018B10046 and 2016S1002)the Natural Science Foundation of Ningbo(No.2017A610010)Foundation of State Key Laboratory of Solid lubrication(No.LSL-1912)National Key Laboratory of Science and Technology on Advanced Composites in Special Environments(No.6142905192806)the K.C.Wong Education Foundation(No.GJTD-2019-13)。
文摘The integration and miniaturization of chips lead to inevitable overheating and increasing electromagnetic interference (EMI) problems, which threaten the performance, stability, and lifetime of electroniccomponents. Therefore, it is important to improve the heat dissipation and EMI shielding performancein device packaging for the steady operation of electronic products. In recent years, due to its intrinsic superior thermal conductivity, proper electrical conductivity, light-weight, and structural adjustability,graphene has been widely used as high thermal and conductive fillers incorporated in the polymer matrix to improve the thermal conductivity and electrical conductivity of composites. This review concludesthe recent development of graphene/polymer composites by using graphene as fillers to improve thethermal conductivity and EMI shielding effectiveness (EMI SE). The structure of graphene embedded inthe composites varies from zero-dimension (0D), one-dimension (1D) to two-dimensions (2D). Moreover,highly thermally and electrically conductive fillers with different dimensions were also modified on thegraphene to improve the composite performance. Finally, this review also makes prospects for the development trend of graphene/polymer composites with high thermal conductivity and EMI SE in the future.
文摘The application of natural fibers as reinforcement in composite material has increased due to environmental concerns,low cost,degradability and health concerns.The purpose of this study is to identify the best type of bamboo fibers to be used as reinforcement for kenaf(K)/bamboo hybrid composite.There were three types of bamboo fibers evaluated in this study which include bamboo mat(B),bamboo fabric(BF)and bamboo powder(BP).Chemical composition of B,BF,BP and K fibers were analyzed in this study.The effect of different types of bamboo fibers on tensile,impact,and morphological properties were investigated.The B/epoxy composites displayed the highest tensile strength(53.03 MPa)while K/epoxy composite had the highest tensile modulus(4.71 GPa).Scanning electron micrographs of B/epoxy composites displayed better fiber/matrix interfacial bonding in comparison to other studied composites.Results showed that impact strength of BF-based composite was highest(45.70 J/m).In conclusion,the tensile strength of B/epoxy composite is superior to the other bamboo reinforced composites and will be further evaluated in the next study.
基金supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIT)(No.2022M3J7A1062940).
文摘Epoxy-based nano-composites can be ideal electromagnetic interference(EMI)-shielding materials owing to their lightness,chemical inertness,and mechanical durability.However,poor conductivity and brittleness of the epoxy resin are challenges for fast-growing portable and flexible EMI-shielding applications,such as smart wristband,medical cloth,aerospace,and military equipment.In this study,we explored hybrid nanofillers of single-walled carbon nanotubes(SWCNT)/reduced graphene oxide(rGO)as conductive inks and polyester fabrics(PFs)as a substrate for flexible EMI-shielding composites.The highest electrical conductivity and fracture toughness of the SWCNT/rGO/PF/epoxy composites were 30.2 S m^(−1)and 38.5 MPa m^(1/2),which are~270 and 65%enhancement over those of the composites without SWCNTs,respectively.Excellent mechanical durability was demonstrated by stable electrical conductivity retention during 1000 cycles of bending test.An EMI-shielding effectiveness of~41 dB in the X-band frequency of 8.2-12.4 GHz with a thickness of 0.6 mm was obtained with an EM absorption-dominant behavior over a 0.7 absorption coefficient.These results are attributed to the hierarchical architecture of the macroscale PF skeleton and nanoscale SWCNT/rGO networks,leading to superior EMI-shielding performance.We believe that this approach provides highly flexible and robust EMI-shielding composites for next-generation wearable electronic devices.
基金Supported by Trans-Century Training Program Foundation for the Talents of Natural Science by the State Education Commission, the Key Project of the Ministry of Education of China under Grant No 105041, the National Natural Science Foundation of China under Grant Nos 90401006, 10434030 and 90301004, and the National Key Basic Research and Development Programme of China under Grant No 2003CB314707.
文摘Photoconductive properties of photodiodes based on composites of CuS nanoparticles and Poly[2-methoxy,5- （2＇-ethylhexyloxy）-p-phenylenevlnylene] （MEH-PPV） are investigated. By comparing composite devices with different MEH-PPV：CuS weight ratios of l：l （D2-1）, 1：1.25 （D2-2）, 1：2.5 （132-3） and 1：5 （D2-4）, it is found that the device D2 3 exhibited the best performance： the short-circuit current density of 17μA/cm^2 with the light intensity of 16.7mW/cm^2, the highest open-circuit voltage of 0,83 V, and the photosensitivity of 132 at reverse bias of - 1 V. The photosensitivity is improved by a factor of 5 compared with the undoped MEH-PPV device.
基金Funded by the Joint Fund of Ministry of Education for Equipment Pre-research(Nos.6141A02022250 and SAST2018-067)。
文摘The ceramifiable polymer composite of MgO-Al_(2)O_(3)-SiO_(2)/boron phenolic resin(MAS/BPF)with 40wt%of inorganic fillers was calcined at 1200℃for different time to promote ceramification of ceramifiable composite and improve heat resistance.The effects of different calcine time on the macroscopical morphology,mass loss,phase evolution,microstructure and chemical bond evolution of MAS/BPF composites were characterized by XRD,XPS,and SEM analyses.The experimental results reveal that the increase of calcine time result in the fewer holes,relatively denser and smoother top layer of MAS/BPF composites and protect the interior from deeper decomposition.The final residues of composites are amorphous carbon and C-O-Si-Al-Mg ceramic.And MAS/BPF composites show excellent mass stability,low shrinkage and self-supporting features after 2 h holding compared with BPF composites without 40wt%of inorganic fillers.
基金the National Natural Science Foundation of China(Nos.51761135113,51911530127 and 51973203)the Fundamental Research Funds for the Central Universities(No.WK2320000043).
文摘The high fire safety of polymer nanocomposites is being pursued by research institutions around the world.In addition to intrinsic flame retardancy strategy,the additive-type flame retardants have attracted increasing attention due to low commercial cost and easy fabrication craft.However,traditional additive-type flame retardants usually need high addition amount to achieve a desirable effect which causes many side-effects on the overall performance of polymer materials,such as deteriorated mechanical property and processability.At present two-dimensional(2D)nanomaterials have also been applied to reduce the fire hazards of polymer(nano)composites with the coupling of barrier function and catalysis as well as carbonization effect.Even though most research work mainly focus on graphene-based flame retardants,more emerging two-dimensional nanomaterials are taking away research attention,due to their complementary and unique properties,mainly including hexagonal boron nitride(h-BN),molybdenum disulfide(MoS2),metal organic frameworks(MOF),carbon nitride(CN),titanium carbide(MXene)and black phosphorene(BP).In this review,except for graphene,the flame retardant mechanism involving different layered nanomaterials are also reviewed.Meanwhile,the functionalization method and flame retardancy effect of different layered nanomaterials are emphatically discussed for offering an effective reference to solve the fire hazards of polymer materials.Moreover,this work objectively evaluates the practical significance of polymer/layered nanomaterials composites for industrial application.
文摘Polymer matrix composites(PMC)are extensively been used in many engineering applications.Various natural fibers have emerged as potential replacements to synthetic fibers as reinforcing materials composites owing to their fairly better mechanical properties,low cost,environment friendliness and biodegradability.Selection of appropriate constituents of composites for a particular application is a tedious task for a designer/engineer.Impact loading has emerged as the serious threat for the composites used in structural or secondary structural application and demands the usage of appropriate fiber and matrix combination to enhance the energy absorption and mitigate the failure.The objective of the present review is to explore the composite with various fiber and matrix combination used for impact applications,identify the gap in the literature and suggest the potential naturally available fiber and matrix combination of composites for future work in the field of impact loading.The novelty of the present study lies in exploring the combination of naturally available fiber and matrix combination which can help in better energy absorption and mitigate the failure when subjected to impact loading.In addition,the application of multi attributes decision making(MADM)tools is demonstrated for selection of fiber and matrix materials which can serve as a benchmark study for the researchers in future.
基金supported by the Natural Science Foundation of Education Department of Henan Province (No.2009A430008)
文摘An innovational method that poly(styrene-co-maleic anhydride)(SMA),a compatibilizer of immiscible nylon6/polystyrene(PA6/PS) blends,was first reacted with carbon black(CB) and then blended with PA6/PS,has been employed to prepare the PA6/PS/(SMA-CB) composites of which CB localized at the interface.In PA6/PS/CB blends,CB was found to preferentially localize in the PA6 phase.However,in the PA6/PS/(SMA-CB) blends,it was found that CB particles can be induced by SMA to localize at the interface.The electrical porperties of PA6/PS/(SMA-CB) composites were investigated.The results showed that the composites exhibited distinct triple percolation behavior,i.e.the percolation is governed by the percolation of CB in SMA phase,the continuity of SMA-CB at the interface and the continuity of PA6/PS interface.The percolation threshold of PA6/PS/(SMA-CB) was only 0.15 wt%,which is much lower than that of PA6/PS/CB.Moreover,the PTC(positive temperature coefficient) intensity of PA6/PS/(SMA-CB) composites was stronger than that of PA6/PS/CB and the negative temperature coefficient(NTC) effect was eliminated.The electrical properties of PA6/PS/(SMA-CB) were explained in terms of its special interface morphology:SMA and CB localize at interphase to form the conductive pathways.
