Genotyping by Target Sequencing(GBTS)technology,known for its flexibility,high efficiency,high throughput,and low cost,has been increasingly employed in molecular breeding.However,there is still limited study on the d...Genotyping by Target Sequencing(GBTS)technology,known for its flexibility,high efficiency,high throughput,and low cost,has been increasingly employed in molecular breeding.However,there is still limited study on the design and development of high-throughput genotyping tools in watermelon.In this study,we identified 112000 high quality SNPs by analyzing the resequencing data of 43 cultivated watermelon accessions.11921 and 6094 SNPs were selected for developing two sets of watermelon liquid-phase chips with different marker densities,named Watermelon 10K and 5K,respectively.Furthermore,the SNPs and Indels of most mapped gene/QTLs for many agronomic important traits in watermelon were also integrated into the two chips for foreground selection.These chips have been tested using GBTS technology in various applications in watermelon.The genotyping of 76 accessions by Watermelon 5K liquid-phase chip showed an average detection rate of 99.28%and 81.78%for cultivated and wild watermelon accessions,respectively.This provided enough markers information for GWAS and two significant QTLs,ssc1.1 and ssc1.2,associated with soluble sugar content were detected.Furthermore,BSA-seq analysis for non-lobed leaf and dwarf traits were validated by liquid-phase chips,and the candidate region was consistent with our previous studies.Additionally,we precisely introduced the Cldw1 and Clbl genes into an elite inbred line WT2 using Watermelon 5K for assisted selection,resulting in the development of three new germplasm with good plant architecture.As a high-throughput genotyping liquid-phase SNP array,the Watermelon 10K and 5K chips will greatly facilitate functional studies and molecular breeding in watermelon.展开更多
A comprehensive understanding of the structure and dynamic evolution of catalytic active sites is vital for advancing the study of liquid-phase acetylene hydrochlorination.Here,we successfully developed a Ru-DIPEA/TMS...A comprehensive understanding of the structure and dynamic evolution of catalytic active sites is vital for advancing the study of liquid-phase acetylene hydrochlorination.Here,we successfully developed a Ru-DIPEA/TMS catalyst optimised through systematic composition and condition tuning,demonstrating exceptional performance with 95.5%C_(2)H_(2)conversion and sustaining over 91.1%activity along with nearly 100%selectivity for VCM during a continuous 900-h test.Using a combination of characterisation techniques,including UV–vis spectroscopy,FT-IR spectroscopy,X-ray photoelectron spectroscopy,singlecrystal X-ray diffraction,and X-ray absorption spectroscopy,along with density functional theory(DFT)calculations,the structure and dynamic behaviour of the active sites were thoroughly investigated under the synergistic influence of ligands and HCl.The results revealed that HCl activation induces a significant structural transformation of the active sites,leading to the formation of a hexacoordinate complex,Ru(CO)_(2)C_(12)(C_(6)H_(15)N·HCl)_(2).DFT calculations further elucidated the mechanism underlying active site formation,revealing that an increased electron density around the Ru centre and corresponding changes in its coordination environment play critical roles in enhancing catalyst stability and activity.This study contributes to a deeper understanding of the structural basis of active site evolution during acetylene hydrochlorination,offering both practical insights into industrial applications and foundational knowledge for advancing liquid-phase catalysis.展开更多
Recent years have witnessed transformative changes brought about by artificial intelligence(AI)techniques with billions of parameters for the realization of high accuracy,proposing high demand for the advanced and AI ...Recent years have witnessed transformative changes brought about by artificial intelligence(AI)techniques with billions of parameters for the realization of high accuracy,proposing high demand for the advanced and AI chip to solve these AI tasks efficiently and powerfully.Rapid progress has been made in the field of advanced chips recently,such as the development of photonic computing,the advancement of the quantum processors,the boost of the biomimetic chips,and so on.Designs tactics of the advanced chips can be conducted with elaborated consideration of materials,algorithms,models,architectures,and so on.Though a few reviews present the development of the chips from their unique aspects,reviews in the view of the latest design for advanced and AI chips are few.Here,the newest development is systematically reviewed in the field of advanced chips.First,background and mechanisms are summarized,and subsequently most important considerations for co-design of the software and hardware are illustrated.Next,strategies are summed up to obtain advanced and AI chips with high excellent performance by taking the important information processing steps into consideration,after which the design thought for the advanced chips in the future is proposed.Finally,some perspectives are put forward.展开更多
Network-on-Chip(NoC)systems are progressively deployed in connecting massively parallel megacore systems in the new computing architecture.As a result,application mapping has become an important aspect of performance ...Network-on-Chip(NoC)systems are progressively deployed in connecting massively parallel megacore systems in the new computing architecture.As a result,application mapping has become an important aspect of performance and scalability,as current trends require the distribution of computation across network nodes/points.In this paper,we survey a large number of mapping and scheduling techniques designed for NoC architectures.This time,we concentrated on 3D systems.We take a systematic literature review approach to analyze existing methods across static,dynamic,hybrid,and machine-learning-based approaches,alongside preliminary AI-based dynamic models in recent works.We classify them into several main aspects covering power-aware mapping,fault tolerance,load-balancing,and adaptive for dynamic workloads.Also,we assess the efficacy of each method against performance parameters,such as latency,throughput,response time,and error rate.Key challenges,including energy efficiency,real-time adaptability,and reinforcement learning integration,are highlighted as well.To the best of our knowledge,this is one of the recent reviews that identifies both traditional and AI-based algorithms for mapping over a modern NoC,and opens research challenges.Finally,we provide directions for future work toward improved adaptability and scalability via lightweight learned models and hierarchical mapping frameworks.展开更多
[Objectives]This study aimed to evaluate the detection sensitivity of Staphylococcus aureus in dairy products utilizing the chip digital PCR(cdPCR)technique.[Methods]Specific primers and probes were designed and synth...[Objectives]This study aimed to evaluate the detection sensitivity of Staphylococcus aureus in dairy products utilizing the chip digital PCR(cdPCR)technique.[Methods]Specific primers and probes were designed and synthesized based on the conserved sequence of the heat-resistant nuclease gene nuc of S.aureus.cdPCR was employed to detect S.aureus,and the sensitivity of this technique was systematically assessed in samples exhibiting low levels of contamination.[Results]cdPCR demonstrated precise quantification when the initial concentration of the sample enrichment solution was equal to or greater than 50 CFU/mL.The detection dynamic range extended across at least five orders of magnitude,with a minimum DNA detection limit of 0.2304 pg/μL.In artificially contaminated cheese samples,the method s lower limit of quantification for detecting S.aureus was 8×10^(2) CFU/g.Regression analysis demonstrated that the gene copy number concentration measured by cdPCR exhibited a strong linear correlation with bacterial contamination concentration across a broad range.[Conclusions]The cdPCR method developed in this study demonstrates high sensitivity and robust quantitative capabilities,offering a reliable technical approach for the precise detection of low-level S.aureus contamination in dairy products.展开更多
The implementation of multiple pathogen testing is essential for a rapid response to future outbreaks and for reducing disease transmission.This study introduces a 96-channel microfluidic chip,fabricated through a mol...The implementation of multiple pathogen testing is essential for a rapid response to future outbreaks and for reducing disease transmission.This study introduces a 96-channel microfluidic chip,fabricated through a molding process,which enables the batch detection of pathogens.It explores the rapid lysis and elution processes of pathogens within the microfluidic chips to ensure that nucleic acid extraction,elution,and amplification are completed entirely within the chip.This chip can extract nucleic acids from samples in just 10 min,achieving an extraction efficiency comparable to that of traditional in-tube methods.An oil phase is pre-loaded into the chip to effectively prevent aerosol contamination.This approach allows for the simultaneous detection of 21 common respiratory pathogens,with a detection limit of 10 copies per reaction.Furthermore,applications involving clinical samples demonstrate significant practicality.Compared to many traditional in-tube pathogen detection methods and molecular biology technologies that utilize microfluidic chips,this detection chip not only enables simultaneous detection of multiple pathogens but also demonstrates high sensitivity.展开更多
We are sorry for the mistakes of Affiliation,"a State Key Laboratory of Advanced Fiber Materials,Center for Advanced Low-Dimension Materials,Donghua University,Shanghai 201620,China"should be replaced by&quo...We are sorry for the mistakes of Affiliation,"a State Key Laboratory of Advanced Fiber Materials,Center for Advanced Low-Dimension Materials,Donghua University,Shanghai 201620,China"should be replaced by"a State Key Laboratory of Advanced Fiber Materials,Center for Advanced Low-Dimension Materials,College of Materials Science and Engineering,Donghua University,Shanghai 201620,China".We apologized for the inconvenience caused by this error.展开更多
Eggplant(Solanum melongena L.)is a globally important vegetable crop,renowned for its nutritional value and economic significance.It is abundant in bioactive compounds such as anthocyanins and chlorogenic acid,which h...Eggplant(Solanum melongena L.)is a globally important vegetable crop,renowned for its nutritional value and economic significance.It is abundant in bioactive compounds such as anthocyanins and chlorogenic acid,which have been associated with multiple health-promoting properties(Azuma et al.,2008;Gurbuz et al.,2018).Given its significant hybrid vigor,F1 hybrid varieties are widely preferred in commercial cultivation(Mistry et al.,2018).However,traditional breeding practices predominantly rely on phenotypic selection,a process that is not only labor-intensive but also time-consuming.展开更多
Multi-organ-on-a-chip(MOOC)technology represents a pivotal direction in the organ-on-a-chip field,seeking to emulate the complex interactions of multiple human organs in vitro through microfluidic systems.This technol...Multi-organ-on-a-chip(MOOC)technology represents a pivotal direction in the organ-on-a-chip field,seeking to emulate the complex interactions of multiple human organs in vitro through microfluidic systems.This technology overcomes the limitations of traditional single-organ models,providing a novel platform for investigating complex disease mechanisms and evaluating drug efficacy and toxicity.Although it demonstrates broad application prospects,its development still faces critical bottlenecks,including inadequate physiological coupling between organs,short functional maintenance durations,and limited real-time monitoring capabilities.Contemporary research is advancing along three key directions,including functional coupling,sensor integration,and full-process automation systems,to propel the technology toward enhanced levels of physiological relevance and predictive accuracy.展开更多
Pt nanoparticles entrapped in ordered mesoporous CMK-3 carbons with p6mm symmetry were prepared using a facile impregnation method, and the resulting materials were characterized using X-ray diffraction spectroscopy, ...Pt nanoparticles entrapped in ordered mesoporous CMK-3 carbons with p6mm symmetry were prepared using a facile impregnation method, and the resulting materials were characterized using X-ray diffraction spectroscopy, N2 adsorption-desorption, scanning electron microscopy, transmission electron microscopy, energy dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy. The Pt nanoparticles were highly dispersed in the CMK-3 with 43.7% dispersion. The Pt/CMK-3 catalyst was an effective catalyst for the liquid-phase hydrogenation of nitrobenzene and its derivatives under the experimental conditions studied here. The Pt/CMK-3 catalyst was more active than commercial Pt/C catalyst in most cases. A highest turnover frequency of 43.8 s-1 was measured when the Pt/CMK-3 catalyst was applied for the hydrogenation of 2-methyl-nitrobenzene in ethanol under optimal conditions. It is worthy of note that the Pt/CMK-3 catalyst could be recycled easily, and could be reused at least fourteen times without any loss in activity or selectivity for the hydrogenation of nitrobenzene in ethanol.展开更多
Liquid phase oxidation of toluene is an environmental benign route for the production of benzoic acid.In a φ48mm bubble column reactor,the commercial process of toluene liquid phase oxidation was conducted with Co(CH...Liquid phase oxidation of toluene is an environmental benign route for the production of benzoic acid.In a φ48mm bubble column reactor,the commercial process of toluene liquid phase oxidation was conducted with Co(CH3COO)2.4H2O as catalyst.The Co2+ concentration [Co2+] was determined by extraction spectrophotometry and hereby the Co3+ concentration [Co3+] was obtained by mass balance.The results showed that [Co3+] reached the maximum at about 25-30min.[Co3+] increased with increasing Co catalyst amount at total Co concentration<150 mg.L-1 of toluene.The conversion of toluene,yield and selectivity of benzoic acid increased with the increasing [Co3+/Co2+] max.A high [Co3+] and a high [Co3+]/[Co2+] ratio are beneficial to the reaction.展开更多
The homogeneous liquid was separated into two phases, （Fe, Co）-rich LI and Cu-rich L2, once the melt was undercooled below a liquid-phase separation temperature Tsep. If the duration from Tsep to Tsl （solidificatio...The homogeneous liquid was separated into two phases, （Fe, Co）-rich LI and Cu-rich L2, once the melt was undercooled below a liquid-phase separation temperature Tsep. If the duration from Tsep to Tsl （solidification temperature of LI phase）, termed the liquid-phase separation interval Δt, exceeded a critical value, an eggtype structure was observed. By utilizing differential thermal analyses （DTA）, the solidification process of the undercooled Fe-Co-Cu alloys was studied. Additionally, an immiscible boundary was obtained, which was a convex parabola with a symmetrical axis of XCu=0.52. Depending on the relative amounts of LI and L2, the minor phase was nucleated firstly to form liquid droplets and separated from the original liquids at the beginning of liquid-phase separation.展开更多
The liquid-phase furfural （FAL） hydrogenation to furfuryl alcohol （FOL） and tetrahydrofurfuryl alcohol （THFOL） was investigated using sulfonate group （-SO3H） grafted activated carbon （AC） supported Ni cataly...The liquid-phase furfural （FAL） hydrogenation to furfuryl alcohol （FOL） and tetrahydrofurfuryl alcohol （THFOL） was investigated using sulfonate group （-SO3H） grafted activated carbon （AC） supported Ni catalyst, which was prepared and activated simultaneously by liquid phase reduction method. This functionalized nickel catalyst demonstrated an enhanced catalytic performance for selective hydrogenation of FAL, in which almost 100% FOL （〈80℃） and THFOL （〉100℃） selectivity with complete conversion was obtained, respectively. More importantly, the conversion of transfer hydrogenation of FAL to FOL also can reach almost 100% under optimal conditions （140℃, 4.0h）. The effect of -SO3H was evaluated and systematically analyzed by the combination of reaction performance and physico-chemical characterizations. Cycling test proved the prepared catalyst could be recycled and reused for several times without noticeably reducing catalytic activity of hvdrogenation.展开更多
The kinetics of liquid-phase hydrogenation of toluene catalyzed by MlNi_5 was studied by investigating the influences of the reaction temperature and pressure on the mass transfer-reaction processes inside the slurry....The kinetics of liquid-phase hydrogenation of toluene catalyzed by MlNi_5 was studied by investigating the influences of the reaction temperature and pressure on the mass transfer-reaction processes inside the slurry. The results show that the reaction rate accelerates when the reaction temperature increases, and reaches its maximum at about 490 K, but if temperature is higher than 510 K, the reaction rate decreases rapidly. The whole reaction process is controlled by the reaction at the surface of the catalyst particles. The mass transfer resistance at gas-liquid interface and that from the bulk liquid phase to the surface of the catalyst particle can be neglected. The apparent reaction rate is zero order for toluene concentration and first order for hydrogen concentration in the liquid phase. The kinetic model is obtained. The kinetic model fits the experimental data very well. The apparent activation energy of the hydrogen absorption reaction of MlNi_5-toluene slurry system is 41.01 kJ·mol^(-1).展开更多
The main problems with the liquid-phase technology of carbon fiber/aluminum matrix composites include poor wetting of the fiber with liquid aluminum and formation of aluminum carbide on the fibers’surface.This paper ...The main problems with the liquid-phase technology of carbon fiber/aluminum matrix composites include poor wetting of the fiber with liquid aluminum and formation of aluminum carbide on the fibers’surface.This paper aims to solve these problems.The theoretical and experimental dependence of porosity on the applied pressure were determined.The possibility of obtaining a carbon fiber/aluminum matrix composite wire with a strength value of about 1500 MPa was shown.The correlation among the strength of the carbon fiber reinforced aluminum matrix composite,the fracture surface,and the degradation of the carbon fiber surface was discussed.展开更多
Cu-Zn-Al slurry catalysts were prepared using a complete liquid-phase preparation technology under different heat treatment atmospheres.The catalysts were characterized using X-ray diffraction,X-ray photoelectron spec...Cu-Zn-Al slurry catalysts were prepared using a complete liquid-phase preparation technology under different heat treatment atmospheres.The catalysts were characterized using X-ray diffraction,X-ray photoelectron spectroscope,and N2 adsorption-desorption.Their application in the single-step synthesis of dimethyl ether from syngas was also investigated.The results indicate that the type of heat treatment atmosphere has an influence on the Cu species and the Cu0/Cu＋ ratio on the catalyst surface.Moreover,the final Cu/Zn ratio on the catalyst surface is mainly dependent on the composition and reaction environment of the catalyst and less on the type of heat treatment atmosphere.The prepared catalysts can suppress sintering of active sites at high temperatures,and the type of heat treatment atmosphere mainly affects the capability of the catalyst for methanol synthesis.The catalysts perform best using N2 as the heat treatment atmosphere.展开更多
TiO2 nanowire arrays were successfully fabricated by liquid-phase deposition method using porous alumina templates. The obtained TiO2 nanowires were characterized using Raman spectroscopy, X-ray diffraction （XRD）, s...TiO2 nanowire arrays were successfully fabricated by liquid-phase deposition method using porous alumina templates. The obtained TiO2 nanowires were characterized using Raman spectroscopy, X-ray diffraction （XRD）, scanning electron microscopy （SEM）, field emission scanning electron microscopy （FE- SEM）, transmission electron microscopy （TEM）, and selected area electron diffraction （SAED） analysis. Results of electron microscopic observations indicated that the nanowires were smooth and uniform with a diameter of about 50-80 nm and several micrometers in length. SAED, Raman, and XRD mea- surements showed that TiO2 nanowires were single-crystalline with a pure rutile structure after heating at 800 ~C for 10 h. In this situation, the nanowire constituents grew preferentially along the 〈001〉 direction. Furthermore, the formation process and mechanistic study of the Ti02 nanowire arrays were proposed and discussed in detail. The nanowires are clearly produced by the deposition of TiO2 particles on the inner wall of the template nanochannels.展开更多
According to the characteristics of FCC diesel, a technology of liquid-phase hydrodesulfurization of the diesel in tubular reactors was proposed and lab-scale experiments were carried out. A kinetic model for the hydr...According to the characteristics of FCC diesel, a technology of liquid-phase hydrodesulfurization of the diesel in tubular reactors was proposed and lab-scale experiments were carried out. A kinetic model for the hydrodesulfurization process was developed and verified. The model was utilized to predict the sulfur content of products under different operating conditions. The effects of temperature, space velocity, pressure, and hydrogen concentration on the dcsulfurization rate were investigated.展开更多
Olivine LiFePO4/C nanowires have been successfully synthesized by a simple and eco-friendly solution preparation.The phase,structure,morphology and composition of the as-prepared products were characterized by powder ...Olivine LiFePO4/C nanowires have been successfully synthesized by a simple and eco-friendly solution preparation.The phase,structure,morphology and composition of the as-prepared products were characterized by powder X-ray diffraction(XRD),scanning electron microscopy(SEM),thermogravimetric and differential-thermogravimetric analysis(TG-DTA) and energy dispersive X-ray spectrometry(EDS) techniques,showing uniform nanowire shape of LiFePO4/C with a diameter of 80-150 nm and a length of several microns.The heat-treated LiFePO4/C nanowires show excellent electrochemical properties of specific discharge capacity,rate capacity and cycling stability.In particular,the LiFePO4/C nanowires heat-treated at 400 °C show preferable first discharge specific capacity of 161 mA·h/g at 0.1C rate,while the voltage platform is 3.4 V and the first discharge specific capacity is 93 mA·h/g at 20C rate.The specific capacity retention is 98% after 50 cycles at 5C rate.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.32172602,32472739)the Major Science and Technology Project of Henan Province(Grant No.221100110400)+3 种基金the Funding of Joint Research on Agricultural Varietie Improvement of Henan Province(Grant No.2022010503)the Natural Science Foundation of Henan(Grant No.242300421030)the Key Scientifc and Technological Project of Henan Province(Grant Nos.242102111124,242102111115)the Key Research and Development Program of Xinjiang Uygur autonomous region(2023B02017-2).
文摘Genotyping by Target Sequencing(GBTS)technology,known for its flexibility,high efficiency,high throughput,and low cost,has been increasingly employed in molecular breeding.However,there is still limited study on the design and development of high-throughput genotyping tools in watermelon.In this study,we identified 112000 high quality SNPs by analyzing the resequencing data of 43 cultivated watermelon accessions.11921 and 6094 SNPs were selected for developing two sets of watermelon liquid-phase chips with different marker densities,named Watermelon 10K and 5K,respectively.Furthermore,the SNPs and Indels of most mapped gene/QTLs for many agronomic important traits in watermelon were also integrated into the two chips for foreground selection.These chips have been tested using GBTS technology in various applications in watermelon.The genotyping of 76 accessions by Watermelon 5K liquid-phase chip showed an average detection rate of 99.28%and 81.78%for cultivated and wild watermelon accessions,respectively.This provided enough markers information for GWAS and two significant QTLs,ssc1.1 and ssc1.2,associated with soluble sugar content were detected.Furthermore,BSA-seq analysis for non-lobed leaf and dwarf traits were validated by liquid-phase chips,and the candidate region was consistent with our previous studies.Additionally,we precisely introduced the Cldw1 and Clbl genes into an elite inbred line WT2 using Watermelon 5K for assisted selection,resulting in the development of three new germplasm with good plant architecture.As a high-throughput genotyping liquid-phase SNP array,the Watermelon 10K and 5K chips will greatly facilitate functional studies and molecular breeding in watermelon.
基金supported by the National Natural Science Foundation of China(No.22378308)Jing-Jin-Ji Regional Integrated Environmental Improvement-National Science and Technology Major Project(No.2024ZD1200301–2)the Scientific and Technological Project of Yunnan Precious Metal Laboratory(No.YPML2023050202)。
文摘A comprehensive understanding of the structure and dynamic evolution of catalytic active sites is vital for advancing the study of liquid-phase acetylene hydrochlorination.Here,we successfully developed a Ru-DIPEA/TMS catalyst optimised through systematic composition and condition tuning,demonstrating exceptional performance with 95.5%C_(2)H_(2)conversion and sustaining over 91.1%activity along with nearly 100%selectivity for VCM during a continuous 900-h test.Using a combination of characterisation techniques,including UV–vis spectroscopy,FT-IR spectroscopy,X-ray photoelectron spectroscopy,singlecrystal X-ray diffraction,and X-ray absorption spectroscopy,along with density functional theory(DFT)calculations,the structure and dynamic behaviour of the active sites were thoroughly investigated under the synergistic influence of ligands and HCl.The results revealed that HCl activation induces a significant structural transformation of the active sites,leading to the formation of a hexacoordinate complex,Ru(CO)_(2)C_(12)(C_(6)H_(15)N·HCl)_(2).DFT calculations further elucidated the mechanism underlying active site formation,revealing that an increased electron density around the Ru centre and corresponding changes in its coordination environment play critical roles in enhancing catalyst stability and activity.This study contributes to a deeper understanding of the structural basis of active site evolution during acetylene hydrochlorination,offering both practical insights into industrial applications and foundational knowledge for advancing liquid-phase catalysis.
基金supported by the Hong Kong Polytechnic University(1-WZ1Y,1-W34U,4-YWER).
文摘Recent years have witnessed transformative changes brought about by artificial intelligence(AI)techniques with billions of parameters for the realization of high accuracy,proposing high demand for the advanced and AI chip to solve these AI tasks efficiently and powerfully.Rapid progress has been made in the field of advanced chips recently,such as the development of photonic computing,the advancement of the quantum processors,the boost of the biomimetic chips,and so on.Designs tactics of the advanced chips can be conducted with elaborated consideration of materials,algorithms,models,architectures,and so on.Though a few reviews present the development of the chips from their unique aspects,reviews in the view of the latest design for advanced and AI chips are few.Here,the newest development is systematically reviewed in the field of advanced chips.First,background and mechanisms are summarized,and subsequently most important considerations for co-design of the software and hardware are illustrated.Next,strategies are summed up to obtain advanced and AI chips with high excellent performance by taking the important information processing steps into consideration,after which the design thought for the advanced chips in the future is proposed.Finally,some perspectives are put forward.
基金the Deanship of Graduate Studies and Scientific Research at University of Bisha for supporting this work through the Fast-Track Research Support Programthe Deanship of Scientific Research at Northern Border University,Arar,KSA for funding this research work through the project number“NBU-FFR-2025-2903-09”.
文摘Network-on-Chip(NoC)systems are progressively deployed in connecting massively parallel megacore systems in the new computing architecture.As a result,application mapping has become an important aspect of performance and scalability,as current trends require the distribution of computation across network nodes/points.In this paper,we survey a large number of mapping and scheduling techniques designed for NoC architectures.This time,we concentrated on 3D systems.We take a systematic literature review approach to analyze existing methods across static,dynamic,hybrid,and machine-learning-based approaches,alongside preliminary AI-based dynamic models in recent works.We classify them into several main aspects covering power-aware mapping,fault tolerance,load-balancing,and adaptive for dynamic workloads.Also,we assess the efficacy of each method against performance parameters,such as latency,throughput,response time,and error rate.Key challenges,including energy efficiency,real-time adaptability,and reinforcement learning integration,are highlighted as well.To the best of our knowledge,this is one of the recent reviews that identifies both traditional and AI-based algorithms for mapping over a modern NoC,and opens research challenges.Finally,we provide directions for future work toward improved adaptability and scalability via lightweight learned models and hierarchical mapping frameworks.
基金Supported by Science and Technology Program of Inner Mongolia Autonomous Region"Research and Demonstration of Novel Molecular Biological Identification Technology for Multiple Source Components in Milk and Dairy Products"(2025YFSH0029).
文摘[Objectives]This study aimed to evaluate the detection sensitivity of Staphylococcus aureus in dairy products utilizing the chip digital PCR(cdPCR)technique.[Methods]Specific primers and probes were designed and synthesized based on the conserved sequence of the heat-resistant nuclease gene nuc of S.aureus.cdPCR was employed to detect S.aureus,and the sensitivity of this technique was systematically assessed in samples exhibiting low levels of contamination.[Results]cdPCR demonstrated precise quantification when the initial concentration of the sample enrichment solution was equal to or greater than 50 CFU/mL.The detection dynamic range extended across at least five orders of magnitude,with a minimum DNA detection limit of 0.2304 pg/μL.In artificially contaminated cheese samples,the method s lower limit of quantification for detecting S.aureus was 8×10^(2) CFU/g.Regression analysis demonstrated that the gene copy number concentration measured by cdPCR exhibited a strong linear correlation with bacterial contamination concentration across a broad range.[Conclusions]The cdPCR method developed in this study demonstrates high sensitivity and robust quantitative capabilities,offering a reliable technical approach for the precise detection of low-level S.aureus contamination in dairy products.
基金supported by grants from the National Key Research and Development Program of China(Nos.2023YFA0915200,2023YFA0915204)the Equipment Research and Development Projects of the Chinese Academy of Sciences(No.PTYQ2024YZ0010)+3 种基金the Science and Technology Commission of Shanghai Municipality Project(No.XTCX-KJ-2024-038)the Natural Science Foundation of Hebei Province of China(No.H2024206249)the Postdoctoral Fellowship Program of CPSF(No.GZC20232838)Science and Technology Commission of Shanghai Municipality(No.22S31901700).
文摘The implementation of multiple pathogen testing is essential for a rapid response to future outbreaks and for reducing disease transmission.This study introduces a 96-channel microfluidic chip,fabricated through a molding process,which enables the batch detection of pathogens.It explores the rapid lysis and elution processes of pathogens within the microfluidic chips to ensure that nucleic acid extraction,elution,and amplification are completed entirely within the chip.This chip can extract nucleic acids from samples in just 10 min,achieving an extraction efficiency comparable to that of traditional in-tube methods.An oil phase is pre-loaded into the chip to effectively prevent aerosol contamination.This approach allows for the simultaneous detection of 21 common respiratory pathogens,with a detection limit of 10 copies per reaction.Furthermore,applications involving clinical samples demonstrate significant practicality.Compared to many traditional in-tube pathogen detection methods and molecular biology technologies that utilize microfluidic chips,this detection chip not only enables simultaneous detection of multiple pathogens but also demonstrates high sensitivity.
文摘We are sorry for the mistakes of Affiliation,"a State Key Laboratory of Advanced Fiber Materials,Center for Advanced Low-Dimension Materials,Donghua University,Shanghai 201620,China"should be replaced by"a State Key Laboratory of Advanced Fiber Materials,Center for Advanced Low-Dimension Materials,College of Materials Science and Engineering,Donghua University,Shanghai 201620,China".We apologized for the inconvenience caused by this error.
基金supported by Yuelushan Laboratory Breeding Program(Grant No.YLS-2025-ZY02013)The Project of National Key Laboratory for Tropical Crop Breeding(Grant No.NKLTCB202341)+4 种基金The New Variety Breeding Project of the Major Science and Technology Projects of Zhejiang(Grant No.2021C02065-1-3)Hunan Provincial Agricultural Science and Technology Innovation Fund Project(Grant No.2025CX115)Key R&D Projects in Hainan Province(Grant No.ZDYF2023XDNY041)Central Public-interest Scientific Institution Basal Research Fund(Grant No.1630062022003)2024 Sanya Technology Stars Program(Grant No.2024KJFX022).
文摘Eggplant(Solanum melongena L.)is a globally important vegetable crop,renowned for its nutritional value and economic significance.It is abundant in bioactive compounds such as anthocyanins and chlorogenic acid,which have been associated with multiple health-promoting properties(Azuma et al.,2008;Gurbuz et al.,2018).Given its significant hybrid vigor,F1 hybrid varieties are widely preferred in commercial cultivation(Mistry et al.,2018).However,traditional breeding practices predominantly rely on phenotypic selection,a process that is not only labor-intensive but also time-consuming.
基金supported by the Shenzhen Medical Research Fund(Grant No.A2303049)Guangdong Basic and Applied Basic Research(Grant No.2023A1515010647)+1 种基金National Natural Science Foundation of China(Grant No.22004135)Shenzhen Science and Technology Program(Grant No.RCBS20210706092409020,GXWD20201231165807008,20200824162253002).
文摘Multi-organ-on-a-chip(MOOC)technology represents a pivotal direction in the organ-on-a-chip field,seeking to emulate the complex interactions of multiple human organs in vitro through microfluidic systems.This technology overcomes the limitations of traditional single-organ models,providing a novel platform for investigating complex disease mechanisms and evaluating drug efficacy and toxicity.Although it demonstrates broad application prospects,its development still faces critical bottlenecks,including inadequate physiological coupling between organs,short functional maintenance durations,and limited real-time monitoring capabilities.Contemporary research is advancing along three key directions,including functional coupling,sensor integration,and full-process automation systems,to propel the technology toward enhanced levels of physiological relevance and predictive accuracy.
基金supported by the National Natural Science Foundation of China(21273076 and 21373089)the Open Research Fund of Top Key Discipline of Chemistry in Zhejiang Provincial Colleges and Key Laboratory of the Ministry of Education for Catalysis Materials(Zhejiang Normal University,ZJHX2013)Shanghai Leading Academic Discipline Project (B409)~~
文摘Pt nanoparticles entrapped in ordered mesoporous CMK-3 carbons with p6mm symmetry were prepared using a facile impregnation method, and the resulting materials were characterized using X-ray diffraction spectroscopy, N2 adsorption-desorption, scanning electron microscopy, transmission electron microscopy, energy dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy. The Pt nanoparticles were highly dispersed in the CMK-3 with 43.7% dispersion. The Pt/CMK-3 catalyst was an effective catalyst for the liquid-phase hydrogenation of nitrobenzene and its derivatives under the experimental conditions studied here. The Pt/CMK-3 catalyst was more active than commercial Pt/C catalyst in most cases. A highest turnover frequency of 43.8 s-1 was measured when the Pt/CMK-3 catalyst was applied for the hydrogenation of 2-methyl-nitrobenzene in ethanol under optimal conditions. It is worthy of note that the Pt/CMK-3 catalyst could be recycled easily, and could be reused at least fourteen times without any loss in activity or selectivity for the hydrogenation of nitrobenzene in ethanol.
基金Supported by the National Natural Science Foundation of China （20576081, 20736009） and the Ph.D. Programs Foundation of Ministry of Education of China （20070610128）.
文摘Liquid phase oxidation of toluene is an environmental benign route for the production of benzoic acid.In a φ48mm bubble column reactor,the commercial process of toluene liquid phase oxidation was conducted with Co(CH3COO)2.4H2O as catalyst.The Co2+ concentration [Co2+] was determined by extraction spectrophotometry and hereby the Co3+ concentration [Co3+] was obtained by mass balance.The results showed that [Co3+] reached the maximum at about 25-30min.[Co3+] increased with increasing Co catalyst amount at total Co concentration<150 mg.L-1 of toluene.The conversion of toluene,yield and selectivity of benzoic acid increased with the increasing [Co3+/Co2+] max.A high [Co3+] and a high [Co3+]/[Co2+] ratio are beneficial to the reaction.
基金supported by the Natural Science Foundation of China (Grant No.50771084)the Natural Science Foundation of the Education Department of Jiangsu province,China (Grant No.09KJB430004)
文摘The homogeneous liquid was separated into two phases, （Fe, Co）-rich LI and Cu-rich L2, once the melt was undercooled below a liquid-phase separation temperature Tsep. If the duration from Tsep to Tsl （solidification temperature of LI phase）, termed the liquid-phase separation interval Δt, exceeded a critical value, an eggtype structure was observed. By utilizing differential thermal analyses （DTA）, the solidification process of the undercooled Fe-Co-Cu alloys was studied. Additionally, an immiscible boundary was obtained, which was a convex parabola with a symmetrical axis of XCu=0.52. Depending on the relative amounts of LI and L2, the minor phase was nucleated firstly to form liquid droplets and separated from the original liquids at the beginning of liquid-phase separation.
基金the National Natural Science Foundation of China (Nos. 51502297, 51372248, and 51432009)Instrument Developing Project of the Chinese Academy of Sciences (No. yz201421)
文摘The liquid-phase furfural （FAL） hydrogenation to furfuryl alcohol （FOL） and tetrahydrofurfuryl alcohol （THFOL） was investigated using sulfonate group （-SO3H） grafted activated carbon （AC） supported Ni catalyst, which was prepared and activated simultaneously by liquid phase reduction method. This functionalized nickel catalyst demonstrated an enhanced catalytic performance for selective hydrogenation of FAL, in which almost 100% FOL （〈80℃） and THFOL （〉100℃） selectivity with complete conversion was obtained, respectively. More importantly, the conversion of transfer hydrogenation of FAL to FOL also can reach almost 100% under optimal conditions （140℃, 4.0h）. The effect of -SO3H was evaluated and systematically analyzed by the combination of reaction performance and physico-chemical characterizations. Cycling test proved the prepared catalyst could be recycled and reused for several times without noticeably reducing catalytic activity of hvdrogenation.
文摘The kinetics of liquid-phase hydrogenation of toluene catalyzed by MlNi_5 was studied by investigating the influences of the reaction temperature and pressure on the mass transfer-reaction processes inside the slurry. The results show that the reaction rate accelerates when the reaction temperature increases, and reaches its maximum at about 490 K, but if temperature is higher than 510 K, the reaction rate decreases rapidly. The whole reaction process is controlled by the reaction at the surface of the catalyst particles. The mass transfer resistance at gas-liquid interface and that from the bulk liquid phase to the surface of the catalyst particle can be neglected. The apparent reaction rate is zero order for toluene concentration and first order for hydrogen concentration in the liquid phase. The kinetic model is obtained. The kinetic model fits the experimental data very well. The apparent activation energy of the hydrogen absorption reaction of MlNi_5-toluene slurry system is 41.01 kJ·mol^(-1).
基金financially supported by ISSP RAS-Russian Government contracts
文摘The main problems with the liquid-phase technology of carbon fiber/aluminum matrix composites include poor wetting of the fiber with liquid aluminum and formation of aluminum carbide on the fibers’surface.This paper aims to solve these problems.The theoretical and experimental dependence of porosity on the applied pressure were determined.The possibility of obtaining a carbon fiber/aluminum matrix composite wire with a strength value of about 1500 MPa was shown.The correlation among the strength of the carbon fiber reinforced aluminum matrix composite,the fracture surface,and the degradation of the carbon fiber surface was discussed.
基金supported by the National Natural Science Foundation of China(No.20706039)the National Basic Research Program(973 Program) of China (No.2005CB221204)+1 种基金the Program for the Top Young Academic Leaders of Higher Learning Institutions of Shanxi of China in 2010the Young Scientific and the Technical Fund of Shanxi of China (No.2006021010)
文摘Cu-Zn-Al slurry catalysts were prepared using a complete liquid-phase preparation technology under different heat treatment atmospheres.The catalysts were characterized using X-ray diffraction,X-ray photoelectron spectroscope,and N2 adsorption-desorption.Their application in the single-step synthesis of dimethyl ether from syngas was also investigated.The results indicate that the type of heat treatment atmosphere has an influence on the Cu species and the Cu0/Cu＋ ratio on the catalyst surface.Moreover,the final Cu/Zn ratio on the catalyst surface is mainly dependent on the composition and reaction environment of the catalyst and less on the type of heat treatment atmosphere.The prepared catalysts can suppress sintering of active sites at high temperatures,and the type of heat treatment atmosphere mainly affects the capability of the catalyst for methanol synthesis.The catalysts perform best using N2 as the heat treatment atmosphere.
基金supported by the Institute of Science and High Technology and Environmental Sciences(No.1/1859)
文摘TiO2 nanowire arrays were successfully fabricated by liquid-phase deposition method using porous alumina templates. The obtained TiO2 nanowires were characterized using Raman spectroscopy, X-ray diffraction （XRD）, scanning electron microscopy （SEM）, field emission scanning electron microscopy （FE- SEM）, transmission electron microscopy （TEM）, and selected area electron diffraction （SAED） analysis. Results of electron microscopic observations indicated that the nanowires were smooth and uniform with a diameter of about 50-80 nm and several micrometers in length. SAED, Raman, and XRD mea- surements showed that TiO2 nanowires were single-crystalline with a pure rutile structure after heating at 800 ~C for 10 h. In this situation, the nanowire constituents grew preferentially along the 〈001〉 direction. Furthermore, the formation process and mechanistic study of the Ti02 nanowire arrays were proposed and discussed in detail. The nanowires are clearly produced by the deposition of TiO2 particles on the inner wall of the template nanochannels.
基金the financial support from the SINOPEC(No.2014310031600599)
文摘According to the characteristics of FCC diesel, a technology of liquid-phase hydrodesulfurization of the diesel in tubular reactors was proposed and lab-scale experiments were carried out. A kinetic model for the hydrodesulfurization process was developed and verified. The model was utilized to predict the sulfur content of products under different operating conditions. The effects of temperature, space velocity, pressure, and hydrogen concentration on the dcsulfurization rate were investigated.
基金Project(51202066)supported by the National Natural Science Foundation of ChinaProject supported by Scientific Research Fund of Hunan Provincial Science and Technology Department,China+1 种基金Project(2013-26)supported by the State Key Program of Jilin University,ChinaProject(2013001)supported by Key Laboratory of Ecological Impacts of Hydraulic-projects and Restoration of Aquatic Ecosystem,Minister of Water Resources,China
文摘Olivine LiFePO4/C nanowires have been successfully synthesized by a simple and eco-friendly solution preparation.The phase,structure,morphology and composition of the as-prepared products were characterized by powder X-ray diffraction(XRD),scanning electron microscopy(SEM),thermogravimetric and differential-thermogravimetric analysis(TG-DTA) and energy dispersive X-ray spectrometry(EDS) techniques,showing uniform nanowire shape of LiFePO4/C with a diameter of 80-150 nm and a length of several microns.The heat-treated LiFePO4/C nanowires show excellent electrochemical properties of specific discharge capacity,rate capacity and cycling stability.In particular,the LiFePO4/C nanowires heat-treated at 400 °C show preferable first discharge specific capacity of 161 mA·h/g at 0.1C rate,while the voltage platform is 3.4 V and the first discharge specific capacity is 93 mA·h/g at 20C rate.The specific capacity retention is 98% after 50 cycles at 5C rate.
