Two soluble tetraalkyl-substituted zinc phthalocyanines(ZnPcs)for use as anode buffer layer materials in tris(8-hydroxyquinoline)aluminum(Alq3)-based organic light-emitting diodes(OLEDs)are presented in this work.The ...Two soluble tetraalkyl-substituted zinc phthalocyanines(ZnPcs)for use as anode buffer layer materials in tris(8-hydroxyquinoline)aluminum(Alq3)-based organic light-emitting diodes(OLEDs)are presented in this work.The holeblocking properties of these Zn Pc layers slowed the hole injection process into the Alq3 emissive layer greatly and thus reduced the production of unstable cationic Alq3(Alq3^+)species.This led to the enhanced brightness and efficiency when compared with the corresponding properties of OLEDs based on the popular poly-(3,4-ethylenedioxythiophene):poly(styrene sulfonate)(PEDOT:PSS)buffer layer.Furthermore,because of the high thermal and chemical stabilities of these Zn Pcs,a nonaqueous film fabrication process was realized together with improved charge balance in the OLEDs and enhanced OLED lifetimes.展开更多
Inserting a hole-buffer layer is an effective way to enhance emission efficiency of electroluminescence devices. We have successfully synthesized a new hole-buffer material PSB composed of pyrene, Schiff base and trih...Inserting a hole-buffer layer is an effective way to enhance emission efficiency of electroluminescence devices. We have successfully synthesized a new hole-buffer material PSB composed of pyrene, Schiff base and trihydroxy tert-butyl groups by the Suzuki-coupling reaction. The HOMO and LUMO lev-els were -6.33 eV and -2.55 eV, respectively, as estimated from cyclic volt-ammograms. In addition, homogeneous films (rms roughness ~2 nm) were readily obtained by spin-coating process. Multilayer polymer light-emitting diodes, ITO/PEDOT:PSS/PSB/SY/LiF/Al, have been fabricated using PSB as hole-buffer layer (HBL). Inserting PSB as HBL significantly enhances the per-formance (maximum luminance: 26,439 cd/m2, maximum current efficiency: 7.03 cd/A), compared with the one without PSB (9802 cd/m2, 2.43 cd/A). It is also superior to the device with conventional BCP as hole-blocking layer (ITO/PEDOT:PSS/SY/BCP/LiF/Al: 15,496 cd/m2, 5.56 cd/A). Current results strongly indicate that the PSB is a potential hole-buffer material for electrolu-minescent devices.展开更多
A series of white phosphorescent OLED devices with buffer layer and multiple dopant structure is investigated in order to obtain better electro-optic performances and color stability. The color coordinate and color st...A series of white phosphorescent OLED devices with buffer layer and multiple dopant structure is investigated in order to obtain better electro-optic performances and color stability. The color coordinate and color stability are related to the location of multiple dopants layer, and the optimized location can compensate for the change of the blue emission intensity under a high voltage and stabilize the spectrum. The electro-optic performances and color stability can be further improved by changing the composition and thickness of the buffer layer between the emitting layer and the electron transport layer.In device B2, the distance from multiple dopant layer to buffer layer is 2 nm and the thickness of buffer layer is 5 nm,the maximum luminance, current density, and power efficiency can reach 9091 cd/m^2, 364.5 mA/cm^2, and 26.74 lm/W,respectively. The variation of international commission on the illumination（CIE） coordinate of device B2 with voltage increasing from 4 V to 7 V is only（0.006, 0.004）.展开更多
This work presents the synthesis of a new hole-buffering material TAZS and its successful application in polymer light-emitting diodes to enhance device performance. The TAZS is composed of aromatic 1,2,4-triazolylcor...This work presents the synthesis of a new hole-buffering material TAZS and its successful application in polymer light-emitting diodes to enhance device performance. The TAZS is composed of aromatic 1,2,4-triazolylcore linked with three trihydroxy tert-butyl terminals via azomethine linkages. The TAZS forms ashomogeneous film deposited by spin-coating process. The HOMO and LUMO levels of TAZS are -5.23 eV and -2.40 eV, respectively, as estimated from cyclic voltammogram. The current density results of hole-only and electron-only devices confirm strong hole-buffering capability of TAZS layer. Multilayer PLEDs with different thickness of TAZS (ITO/PEDOT: PSS/TAZS (x nm)/SY/ETL/LiF/Al) have been successfully fabricated, using spin-coating process to deposit hole-injecting PEDOT: PSS, TAZS, and emissive SY layers. The PLED with 16 nm TAZS reveals the optimal device performance, with maximum luminance and maximum current efficiency of 19,046 cd/m2 and 4.08 cd/A, respectively, surpassing those without TAZS as HBL (8484 cd/m2, 2.13 cd/A). The hole-buffering characteristic of TAZS contributes greatly to improved charges’ recombination ratio and enhanced emission efficiency.展开更多
基金Project supported by the Shenzhen Personal Maker Project,China(Grant No.GRCK2017082316173208)the Shenzhen Overseas High-level Talents Innovation Plan of Technical Innovation,China(Grant No.KQJSCX20180323140712012)the Special Funds for the Development of Strategic Emerging Industries in Shenzhen,China(Grant No.JCJY20170818154457845)
文摘Two soluble tetraalkyl-substituted zinc phthalocyanines(ZnPcs)for use as anode buffer layer materials in tris(8-hydroxyquinoline)aluminum(Alq3)-based organic light-emitting diodes(OLEDs)are presented in this work.The holeblocking properties of these Zn Pc layers slowed the hole injection process into the Alq3 emissive layer greatly and thus reduced the production of unstable cationic Alq3(Alq3^+)species.This led to the enhanced brightness and efficiency when compared with the corresponding properties of OLEDs based on the popular poly-(3,4-ethylenedioxythiophene):poly(styrene sulfonate)(PEDOT:PSS)buffer layer.Furthermore,because of the high thermal and chemical stabilities of these Zn Pcs,a nonaqueous film fabrication process was realized together with improved charge balance in the OLEDs and enhanced OLED lifetimes.
文摘Inserting a hole-buffer layer is an effective way to enhance emission efficiency of electroluminescence devices. We have successfully synthesized a new hole-buffer material PSB composed of pyrene, Schiff base and trihydroxy tert-butyl groups by the Suzuki-coupling reaction. The HOMO and LUMO lev-els were -6.33 eV and -2.55 eV, respectively, as estimated from cyclic volt-ammograms. In addition, homogeneous films (rms roughness ~2 nm) were readily obtained by spin-coating process. Multilayer polymer light-emitting diodes, ITO/PEDOT:PSS/PSB/SY/LiF/Al, have been fabricated using PSB as hole-buffer layer (HBL). Inserting PSB as HBL significantly enhances the per-formance (maximum luminance: 26,439 cd/m2, maximum current efficiency: 7.03 cd/A), compared with the one without PSB (9802 cd/m2, 2.43 cd/A). It is also superior to the device with conventional BCP as hole-blocking layer (ITO/PEDOT:PSS/SY/BCP/LiF/Al: 15,496 cd/m2, 5.56 cd/A). Current results strongly indicate that the PSB is a potential hole-buffer material for electrolu-minescent devices.
文摘A series of white phosphorescent OLED devices with buffer layer and multiple dopant structure is investigated in order to obtain better electro-optic performances and color stability. The color coordinate and color stability are related to the location of multiple dopants layer, and the optimized location can compensate for the change of the blue emission intensity under a high voltage and stabilize the spectrum. The electro-optic performances and color stability can be further improved by changing the composition and thickness of the buffer layer between the emitting layer and the electron transport layer.In device B2, the distance from multiple dopant layer to buffer layer is 2 nm and the thickness of buffer layer is 5 nm,the maximum luminance, current density, and power efficiency can reach 9091 cd/m^2, 364.5 mA/cm^2, and 26.74 lm/W,respectively. The variation of international commission on the illumination（CIE） coordinate of device B2 with voltage increasing from 4 V to 7 V is only（0.006, 0.004）.
文摘This work presents the synthesis of a new hole-buffering material TAZS and its successful application in polymer light-emitting diodes to enhance device performance. The TAZS is composed of aromatic 1,2,4-triazolylcore linked with three trihydroxy tert-butyl terminals via azomethine linkages. The TAZS forms ashomogeneous film deposited by spin-coating process. The HOMO and LUMO levels of TAZS are -5.23 eV and -2.40 eV, respectively, as estimated from cyclic voltammogram. The current density results of hole-only and electron-only devices confirm strong hole-buffering capability of TAZS layer. Multilayer PLEDs with different thickness of TAZS (ITO/PEDOT: PSS/TAZS (x nm)/SY/ETL/LiF/Al) have been successfully fabricated, using spin-coating process to deposit hole-injecting PEDOT: PSS, TAZS, and emissive SY layers. The PLED with 16 nm TAZS reveals the optimal device performance, with maximum luminance and maximum current efficiency of 19,046 cd/m2 and 4.08 cd/A, respectively, surpassing those without TAZS as HBL (8484 cd/m2, 2.13 cd/A). The hole-buffering characteristic of TAZS contributes greatly to improved charges’ recombination ratio and enhanced emission efficiency.
