This paper deals with a nonlinear control strategy of induction motor that combines an input-output linearization control technique and a nonlinear observer design. It is well known that induction motors are the most ...This paper deals with a nonlinear control strategy of induction motor that combines an input-output linearization control technique and a nonlinear observer design. It is well known that induction motors are the most widely used motors in electrical appliances, industrial control and automation. However, it is also known that induction motor control is a complex task that is due to its nonlinear characteristics. Two main features of the proposed approach are worth to be mentioned. Firstly, a nonlinear control is carried out using a nonlinear feedback linearization technique involving non available state variable measurements of the induction motor system. Secondly, a nonlinear observer is designed to estimate these pertinent but unmeasurable state variables of the machine. The circle-criterion approach is performed to compute the observer gain matrices as a solution of LMI （linear matrix inequalities） that ensure the stability conditions, in the sense of Lyapunov, of the estimated state error dynamics of the designed observer. Simulation results are presented to validate the effectiveness of the proposed approach.展开更多
Cable robots are structurally the same as parallel robots but with the basic difference that cables can only pull the platform and cannot push it. This feature makes control of cable robots a lot more challenging comp...Cable robots are structurally the same as parallel robots but with the basic difference that cables can only pull the platform and cannot push it. This feature makes control of cable robots a lot more challenging compared to parallel robots. This paper introduces a controller for cable robots under force constraint. The controller is based on input-output linearization and linear model predictive control. Performance of input-output linearizing (IOL) controllers suffers due to constraints on input and output variables. This problem is successfully tackled by augmenting IOL controllers with linear model predictive controller (LMPC). The effecttiveness of the proposed method is illustrated by numerical simulation.展开更多
In this paper, the nonlinear control of chaotic oscillations was investigated by using the input output linearization control method. The chaotic attitude of a kind of spacecraft was discussed. It is demonstrated that...In this paper, the nonlinear control of chaotic oscillations was investigated by using the input output linearization control method. The chaotic attitude of a kind of spacecraft was discussed. It is demonstrated that the input output linearization control law is the nonlinear version of the parametric open plus closed loop control law.展开更多
现有电力负荷预测方法面临诸多挑战,尤其是在考虑气象因素对负荷波动的影响时,传统方法往往忽视气象特征与负荷之间复杂的非线性关系,导致预测精度不足。对此文中提出一种基于气象相似日修正(meteorological similar day correction,MS...现有电力负荷预测方法面临诸多挑战,尤其是在考虑气象因素对负荷波动的影响时,传统方法往往忽视气象特征与负荷之间复杂的非线性关系,导致预测精度不足。对此文中提出一种基于气象相似日修正(meteorological similar day correction,MSDC)和改进鹦鹉优化(improved parrot optimizer,IPO)线性分解(decomposition-based linear,DLinear)的日前电力负荷预测模型。首先运用Logistic映射、自适应变异策略、螺旋波动搜索IPO对DLinear超参数进行优化,然后由DLinear提取数据的周期性和趋势性特征,最后通过比对气象特征欧氏距离修正负荷预测值,形成基于IPO-DLinear-MSDC的日前电力负荷预测模型。采用2024年6月至10月湖南株洲地区总电力负荷数据集进行仿真分析,IPO-DLinear-MSDC模型的输出平均绝对百分比误差(mean absolute percentage error,MAPE)、决定系数R2分别为4.67%、0.833,相较于IPO-DLinear与PO-DLinear模型,MAPE分别下降了0.83个百分点、1.43个百分点,R2分别提升了0.074、0.125。展开更多
The exact feedback linearization method implies an accurate knowledge of the model and its parameters.This assumption is an inherent limitation of the method,suffering from robustness issues.In general,the model struc...The exact feedback linearization method implies an accurate knowledge of the model and its parameters.This assumption is an inherent limitation of the method,suffering from robustness issues.In general,the model structure is only partially known and its parameters present uncertainties.The current paper extends the classical exact feedback linearization to the robust feedback linearization by adding an appropriatelydesigned robust control layer.This is then able to ensure robust stability and robust performance for the given uncertain system in a desired region of attraction.We consider the case of full relative degree input-affine nonlinear systems,which are of great practical importance in the literature.The inner loop contains the feedback linearization input for the nominal system and the resulting residual nonlinearities can always be characterized as inverse additive uncertainties.The constructive proofs provide exact representations of the uncertainty models in three considered scenarios:unmatched,fully-matched,and partially-matched uncertainties.The uncertainty model will be a descriptor system,which also represents one of the novelties of the paper.Our approach leads to a simplified control structure and a less conservative coverage of the uncertainty set compared to current alternatives.The end-to-end procedure is emphasized on an illustrative example,in two different hypotheses.展开更多
The growing prevalence of exercise-induced tibial stress fractures demands wearable sensors capable of monitoring dynamic musculoskeletal loads with medical-grade precision.While flexible pressure-sensing insoles show...The growing prevalence of exercise-induced tibial stress fractures demands wearable sensors capable of monitoring dynamic musculoskeletal loads with medical-grade precision.While flexible pressure-sensing insoles show clinical potential,their development has been hindered by the intrinsic trade-off between high sensitivity and full-range linearity(R^(2)>0.99 up to 1 MPa)in conventional designs.Inspired by the tactile sensing mechanism of human skin,where dermal stratification enables wide-range pressure adaptation and ion-channelregulated signaling maintains linear electrical responses,we developed a dual-mechanism flexible iontronic pressure sensor(FIPS).This innovative design synergistically combines two bioinspired components:interdigitated fabric microstructures enabling pressure-proportional contact area expansion(αP1/3)and iontronic film facilitating self-adaptive ion concentration modulation(αP^(2/3)),which together generate a linear capacitance-pressure response(CαP).The FIPS achieves breakthrough performance:242 kPa^(-1)sensitivity with 0.997linearity across 0-1 MPa,yielding a record linear sensing factor(LSF=242,000).The design is validated across various substrates and ionic materials,demonstrating its versatility.Finally,the FIPS-driven design enables a smart insole demonstrating 1.8%error in tibial load assessment during gait analysis,outperforming nonlinear counterparts(6.5%error)in early fracture-risk prediction.The biomimetic design framework establishes a universal approach for developing high-performance linear sensors,establishing generalized principles for medical-grade wearable devices.展开更多
Knowing the precise relationship between fuel loading and reactivity is essential for guiding reactor criticality extrapolation and online refueling in molten salt reactors(MSRs).This study aims to explore and explain...Knowing the precise relationship between fuel loading and reactivity is essential for guiding reactor criticality extrapolation and online refueling in molten salt reactors(MSRs).This study aims to explore and explain the linear relationship between reactivity and the reciprocal of uranium concentration in thermal-spectrum MSRs.By applying neutron balance theory,we analyzed the neutron absorption cross sections of various nuclides in single-lattice models with varying fuel concentrations.Our findings reveal a simple linear correlation between reactivity and the reciprocal of uranium concentration,which can be explained from the perspective of nuclear reaction cross sections that adhere to the 1/v law in the thermal neutron spectrum.Furthermore,we identified that the neutron absorption single-group cross sections of structural materials and carrier salts exhibit an approximately linear relationship with the fission single-group cross section of ^(235) U;similarly,the reciprocal of ^(235)U’s fission cross section exhibits an approximately linear relationship with uranium concentration.This linear relationship deviates as the volume fraction of molten salt increases,due to a greater proportion of neutrons being captured in the resonance energy spectrum.However,it remains valid for molten salt volume fractions up to 25%and demonstrates broad applicability in the physical design and operation of thermal molten salt reactors.展开更多
NaNbO_(3)-based lead-free dielectric ceramics possess significant application prospects in the field of dielectric capacitors.However,their development is hindered by low recoverable energy storage density(W_(rec))and...NaNbO_(3)-based lead-free dielectric ceramics possess significant application prospects in the field of dielectric capacitors.However,their development is hindered by low recoverable energy storage density(W_(rec))and energy storage efficiency(η).Herein,novel NaNbO_(3)-based ceramics,(1-x)[0.7Na_(0.97)Sm_(0.01)NbO_(3)–0.3(Sr_(0.7)Bi_(0.2))(Ti_(0.8)Zr_(0.2))O_(3)]–xCaTiO_(3),were created by adding CaTiO_(3) linear dielectric,aiming to improve their energy storage performance(ESP).The phase structure,microstructure,dielectric properties,energy storage and charge–discharge performances of the ceramics were methodically analyzed.All components of the ceramics exhibit a perovskite structure consisting of two phases:antiferroelectric P-phase(AFE P)and antiferroelectric R-phase(AFE R),with the AFE R phase increasing as x rises.All ceramic surfaces exhibit clear grain morphology.The resultant ceramics have an appropriate dielectric constant and a small dielectric loss,which are beneficial for improving breakdown field strength(E_(b)).Finally,at an E_(b) of 470 kV/cm,0.85[0.7Na_(0.97)Sm_(0.01)NbO_(3)–0.3(Sr_(0.7)Bi_(0.2))(Ti_(0.8)Zr_(0.2))O_(3)]–0.15CaTiO_(3) ceramic achieves optimal ESP:W_(rec)=3.9 J/cm^(3),η=72.49%.In addition,it has remarkable stability with temperature and frequency in energy storage and displays ultrafast speed in the charge–discharge process(t_(0.9)=27 ns).展开更多
During the use of robotics in applications such as antiterrorism or combat,a motion-constrained pursuer vehicle,such as a Dubins unmanned surface vehicle(USV),must get close enough(within a prescribed zero or positive...During the use of robotics in applications such as antiterrorism or combat,a motion-constrained pursuer vehicle,such as a Dubins unmanned surface vehicle(USV),must get close enough(within a prescribed zero or positive distance)to a moving target as quickly as possible,resulting in the extended minimum-time intercept problem(EMTIP).Existing research has primarily focused on the zero-distance intercept problem,MTIP,establishing the necessary or sufficient conditions for MTIP optimality,and utilizing analytic algorithms,such as root-finding algorithms,to calculate the optimal solutions.However,these approaches depend heavily on the properties of the analytic algorithm,making them inapplicable when problem settings change,such as in the case of a positive effective range or complicated target motions outside uniform rectilinear motion.In this study,an approach employing a high-accuracy and quality-guaranteed mixed-integer piecewise-linear program(QG-PWL)is proposed for the EMTIP.This program can accommodate different effective interception ranges and complicated target motions(variable velocity or complicated trajectories).The high accuracy and quality guarantees of QG-PWL originate from elegant strategies such as piecewise linearization and other developed operation strategies.The approximate error in the intercept path length is proved to be bounded to h^(2)/(4√2),where h is the piecewise length.展开更多
In order to investigate the penetration performance of Linear-Shaped Charge(LSC),Embowed LinearShaped Charge(ELSC),and Embowed Linear Explosively Formed Projectile(ELEFP)on T-shaped stiffened plates,a series of near-f...In order to investigate the penetration performance of Linear-Shaped Charge(LSC),Embowed LinearShaped Charge(ELSC),and Embowed Linear Explosively Formed Projectile(ELEFP)on T-shaped stiffened plates,a series of near-field air-burst experiments are conducted.The damage modes and characteristics of the target plates are compared and analyzed.Each flat plate section is completely punctured,resulting in a penetration hole.The damage modes induced by the three charge types on the stiffened plate structure are consistent,characterized by shear failure in the central region of the flat plate due to penetration by the penetrator,localized plastic deformation of the flat plate,and local penetration failure resulting from partial perforation of the central stiffener.The penetration lengths caused by ELSC and ELEFP are 45.1%and 46.1% larger than that of LSC,while the half-width of the penetration hole generated by ELEFP is 54.2% and 24.7% smaller than that of ELSC and LSC,respectively.The penetration height caused by ELEFP are 17.5%and 62.1% larger than that of ELSC and LSC,respectively.The stiffener effectively segments the damage area,enhancing the local structural strength and limiting the extent of plastic deformation in the flat plate section.The comparative results show that the ELSC proves to be more effective for efficient large-scale damage,and ELEFP is more suitable for achieving efficient localized damage.展开更多
Dear Editor,Linear and whorled nevoid hypermelanosis(LWNH)is a rare,sporadic pigmentary disorder characterized by hyperpigmented macules arranged in linear streaks and whorls along Blaschko's lines,typically appea...Dear Editor,Linear and whorled nevoid hypermelanosis(LWNH)is a rare,sporadic pigmentary disorder characterized by hyperpigmented macules arranged in linear streaks and whorls along Blaschko's lines,typically appearing within the first few weeks of life[1],and remains a challenge to treat.Here,we report a case of LWNH and review the relevant literature to help clinicians better understand this disease.展开更多
Aim To present a simple and effective method for the design of nonlinear and time varying control system. Methods A new concept of dynamic equilibrium of a system and its stability were presented first. It was poin...Aim To present a simple and effective method for the design of nonlinear and time varying control system. Methods A new concept of dynamic equilibrium of a system and its stability were presented first. It was pointed out that what is controlled directly by the input of a control system is the system's dynamic equilibrium rather than the states. Based on it, a new feedback linearization method for nonlinear system based on the Lyapunov direct method was given. Simulation studies were also carried out. Results The example and simulation show that by use of the method, the controller design becomes very simple and the control effect is quite satisfying. Conclusion The new method unifies the stabilizing problem(regulating problem) with the tracking problem. It is a very simple and effective method for the design of nonlinear and time varying control system.展开更多
A class of nonlinear and continuous type Leontief model and its corresponding conditional input-output equation are introduced, and two basic problems under the so called positive or negative boundary assumption are p...A class of nonlinear and continuous type Leontief model and its corresponding conditional input-output equation are introduced, and two basic problems under the so called positive or negative boundary assumption are presented. By approaches of nonlinear analysis some solvability results of this equation and continuous perturbation properties of the relative solution sets are obtained, and some economic significance are illustrated by the remark.展开更多
In order to design a nonlinear controller for small-scale autonomous helicopters, the dynamic characteristics of a model helicopter are investigated, and an integrated nonlinear model of a small-scale helicopter for h...In order to design a nonlinear controller for small-scale autonomous helicopters, the dynamic characteristics of a model helicopter are investigated, and an integrated nonlinear model of a small-scale helicopter for hovering control is presented. It is proved that the nonlinear system of the small-scale helicopter can be transformed to a linear system using the dynamic feedback linearization technique. Finally, simulations are carried out to validate the nonlinear controller.展开更多
The equivalent linearization method （ELM） is modified to investigate the nonlinear flut- ter system of an airfoil with a cubic damping. After obtaining the linearization quantity of the cubic nonlinearity by the ELM...The equivalent linearization method （ELM） is modified to investigate the nonlinear flut- ter system of an airfoil with a cubic damping. After obtaining the linearization quantity of the cubic nonlinearity by the ELM, an equivalent system can be deduced and then investigated by linear flut- ter analysis methods. Different from the routine procedures of the ELM, the frequency rather than the amplitude of limit cycle oscillation （LCO） is chosen as an active increment to produce bifurca- tion charts. Numerical examples show that this modification makes the ELM much more efficient. Meanwhile, the LCOs obtained by the ELM are in good agreement with numerical solutions. The nonlinear damping can delay the occurrence of secondary bifurcation. On the other hand, it has marginal influence on bifurcation characteristics or LCOs.展开更多
This paper is focused on developing a tracking controller for a hypersonic cruise vehicle using tangent linearization approach.The design of flight control systems for air-breathing hypersonic vehicles is a highly cha...This paper is focused on developing a tracking controller for a hypersonic cruise vehicle using tangent linearization approach.The design of flight control systems for air-breathing hypersonic vehicles is a highly challenging task due to the unique characteristics of the vehicle dynamics.Motivated by recent results on tangent linearization control,the tracking control problem for the hypersonic cruise vehicle is reduced to that of a feedback stabilizing controller design for a linear time-varying system which can be accomplished by a standard design method of frozen-time control.Through a proper model transformation,it can be proven that the tracking error of the designed closed-loop system decays exponentially.Simulation studies are conducted for trimmed cruise conditions of 110000 ft and Mach 15 where the responses of the vehicle to step changes in altitude and velocity are evaluated.The effectiveness of the controller is demonstrated by simulation results.展开更多
The impact angle control over guidance(IACG) law against stationary targets is proposed by using feedback linearization control(FLC) and finite time control(FTC). First, this paper transforms the kinematics equation o...The impact angle control over guidance(IACG) law against stationary targets is proposed by using feedback linearization control(FLC) and finite time control(FTC). First, this paper transforms the kinematics equation of guidance systems into the feedbackable linearization model, in which the guidance law is obtained without considering the impact angle via FLC. For the purpose of the line of sight(LOS) angle and its rate converging to the desired values, the second-order LOS angle is considered as a double-integral system. Then, this paper utilizes FTC to design a controller which can guarantee the states of the double-integral system converging to the desired values. Numerical simulation illustrates the performance of the IACG, in contrast to the existing guidance law.展开更多
文摘This paper deals with a nonlinear control strategy of induction motor that combines an input-output linearization control technique and a nonlinear observer design. It is well known that induction motors are the most widely used motors in electrical appliances, industrial control and automation. However, it is also known that induction motor control is a complex task that is due to its nonlinear characteristics. Two main features of the proposed approach are worth to be mentioned. Firstly, a nonlinear control is carried out using a nonlinear feedback linearization technique involving non available state variable measurements of the induction motor system. Secondly, a nonlinear observer is designed to estimate these pertinent but unmeasurable state variables of the machine. The circle-criterion approach is performed to compute the observer gain matrices as a solution of LMI （linear matrix inequalities） that ensure the stability conditions, in the sense of Lyapunov, of the estimated state error dynamics of the designed observer. Simulation results are presented to validate the effectiveness of the proposed approach.
文摘Cable robots are structurally the same as parallel robots but with the basic difference that cables can only pull the platform and cannot push it. This feature makes control of cable robots a lot more challenging compared to parallel robots. This paper introduces a controller for cable robots under force constraint. The controller is based on input-output linearization and linear model predictive control. Performance of input-output linearizing (IOL) controllers suffers due to constraints on input and output variables. This problem is successfully tackled by augmenting IOL controllers with linear model predictive controller (LMPC). The effecttiveness of the proposed method is illustrated by numerical simulation.
基金Supported by the National Natural Science Foundation of China!( 19782 0 0 3 ) theChina Postdoctoral Science Foundation and
文摘In this paper, the nonlinear control of chaotic oscillations was investigated by using the input output linearization control method. The chaotic attitude of a kind of spacecraft was discussed. It is demonstrated that the input output linearization control law is the nonlinear version of the parametric open plus closed loop control law.
文摘现有电力负荷预测方法面临诸多挑战,尤其是在考虑气象因素对负荷波动的影响时,传统方法往往忽视气象特征与负荷之间复杂的非线性关系,导致预测精度不足。对此文中提出一种基于气象相似日修正(meteorological similar day correction,MSDC)和改进鹦鹉优化(improved parrot optimizer,IPO)线性分解(decomposition-based linear,DLinear)的日前电力负荷预测模型。首先运用Logistic映射、自适应变异策略、螺旋波动搜索IPO对DLinear超参数进行优化,然后由DLinear提取数据的周期性和趋势性特征,最后通过比对气象特征欧氏距离修正负荷预测值,形成基于IPO-DLinear-MSDC的日前电力负荷预测模型。采用2024年6月至10月湖南株洲地区总电力负荷数据集进行仿真分析,IPO-DLinear-MSDC模型的输出平均绝对百分比误差(mean absolute percentage error,MAPE)、决定系数R2分别为4.67%、0.833,相较于IPO-DLinear与PO-DLinear模型,MAPE分别下降了0.83个百分点、1.43个百分点,R2分别提升了0.074、0.125。
基金funded by the project new smart and adaptive robotics solutions for personalized minimally invasive surgery in cancer treatment−ATHENA,European Union-NextGenerationEU and Romanian Government,under National Recovery and Resilience Plan for Romania(CF116/15.11.2022)through the Romanian Ministry of Research,Innovation and Digitalization(within Component 9,investment I8)。
文摘The exact feedback linearization method implies an accurate knowledge of the model and its parameters.This assumption is an inherent limitation of the method,suffering from robustness issues.In general,the model structure is only partially known and its parameters present uncertainties.The current paper extends the classical exact feedback linearization to the robust feedback linearization by adding an appropriatelydesigned robust control layer.This is then able to ensure robust stability and robust performance for the given uncertain system in a desired region of attraction.We consider the case of full relative degree input-affine nonlinear systems,which are of great practical importance in the literature.The inner loop contains the feedback linearization input for the nominal system and the resulting residual nonlinearities can always be characterized as inverse additive uncertainties.The constructive proofs provide exact representations of the uncertainty models in three considered scenarios:unmatched,fully-matched,and partially-matched uncertainties.The uncertainty model will be a descriptor system,which also represents one of the novelties of the paper.Our approach leads to a simplified control structure and a less conservative coverage of the uncertainty set compared to current alternatives.The end-to-end procedure is emphasized on an illustrative example,in two different hypotheses.
基金supported by the National Natural Science Foundation of China(NSFC 52175281,52475315)Youth Innovation Promotion Association of CAS(2021382)。
文摘The growing prevalence of exercise-induced tibial stress fractures demands wearable sensors capable of monitoring dynamic musculoskeletal loads with medical-grade precision.While flexible pressure-sensing insoles show clinical potential,their development has been hindered by the intrinsic trade-off between high sensitivity and full-range linearity(R^(2)>0.99 up to 1 MPa)in conventional designs.Inspired by the tactile sensing mechanism of human skin,where dermal stratification enables wide-range pressure adaptation and ion-channelregulated signaling maintains linear electrical responses,we developed a dual-mechanism flexible iontronic pressure sensor(FIPS).This innovative design synergistically combines two bioinspired components:interdigitated fabric microstructures enabling pressure-proportional contact area expansion(αP1/3)and iontronic film facilitating self-adaptive ion concentration modulation(αP^(2/3)),which together generate a linear capacitance-pressure response(CαP).The FIPS achieves breakthrough performance:242 kPa^(-1)sensitivity with 0.997linearity across 0-1 MPa,yielding a record linear sensing factor(LSF=242,000).The design is validated across various substrates and ionic materials,demonstrating its versatility.Finally,the FIPS-driven design enables a smart insole demonstrating 1.8%error in tibial load assessment during gait analysis,outperforming nonlinear counterparts(6.5%error)in early fracture-risk prediction.The biomimetic design framework establishes a universal approach for developing high-performance linear sensors,establishing generalized principles for medical-grade wearable devices.
文摘Knowing the precise relationship between fuel loading and reactivity is essential for guiding reactor criticality extrapolation and online refueling in molten salt reactors(MSRs).This study aims to explore and explain the linear relationship between reactivity and the reciprocal of uranium concentration in thermal-spectrum MSRs.By applying neutron balance theory,we analyzed the neutron absorption cross sections of various nuclides in single-lattice models with varying fuel concentrations.Our findings reveal a simple linear correlation between reactivity and the reciprocal of uranium concentration,which can be explained from the perspective of nuclear reaction cross sections that adhere to the 1/v law in the thermal neutron spectrum.Furthermore,we identified that the neutron absorption single-group cross sections of structural materials and carrier salts exhibit an approximately linear relationship with the fission single-group cross section of ^(235) U;similarly,the reciprocal of ^(235)U’s fission cross section exhibits an approximately linear relationship with uranium concentration.This linear relationship deviates as the volume fraction of molten salt increases,due to a greater proportion of neutrons being captured in the resonance energy spectrum.However,it remains valid for molten salt volume fractions up to 25%and demonstrates broad applicability in the physical design and operation of thermal molten salt reactors.
基金Project supported by the Natural Science Foundation of Anhui Provincial Education Department(Grant No.KJ2019A0054)。
文摘NaNbO_(3)-based lead-free dielectric ceramics possess significant application prospects in the field of dielectric capacitors.However,their development is hindered by low recoverable energy storage density(W_(rec))and energy storage efficiency(η).Herein,novel NaNbO_(3)-based ceramics,(1-x)[0.7Na_(0.97)Sm_(0.01)NbO_(3)–0.3(Sr_(0.7)Bi_(0.2))(Ti_(0.8)Zr_(0.2))O_(3)]–xCaTiO_(3),were created by adding CaTiO_(3) linear dielectric,aiming to improve their energy storage performance(ESP).The phase structure,microstructure,dielectric properties,energy storage and charge–discharge performances of the ceramics were methodically analyzed.All components of the ceramics exhibit a perovskite structure consisting of two phases:antiferroelectric P-phase(AFE P)and antiferroelectric R-phase(AFE R),with the AFE R phase increasing as x rises.All ceramic surfaces exhibit clear grain morphology.The resultant ceramics have an appropriate dielectric constant and a small dielectric loss,which are beneficial for improving breakdown field strength(E_(b)).Finally,at an E_(b) of 470 kV/cm,0.85[0.7Na_(0.97)Sm_(0.01)NbO_(3)–0.3(Sr_(0.7)Bi_(0.2))(Ti_(0.8)Zr_(0.2))O_(3)]–0.15CaTiO_(3) ceramic achieves optimal ESP:W_(rec)=3.9 J/cm^(3),η=72.49%.In addition,it has remarkable stability with temperature and frequency in energy storage and displays ultrafast speed in the charge–discharge process(t_(0.9)=27 ns).
基金supported by the National Natural Sci‐ence Foundation of China(Grant No.62306325)。
文摘During the use of robotics in applications such as antiterrorism or combat,a motion-constrained pursuer vehicle,such as a Dubins unmanned surface vehicle(USV),must get close enough(within a prescribed zero or positive distance)to a moving target as quickly as possible,resulting in the extended minimum-time intercept problem(EMTIP).Existing research has primarily focused on the zero-distance intercept problem,MTIP,establishing the necessary or sufficient conditions for MTIP optimality,and utilizing analytic algorithms,such as root-finding algorithms,to calculate the optimal solutions.However,these approaches depend heavily on the properties of the analytic algorithm,making them inapplicable when problem settings change,such as in the case of a positive effective range or complicated target motions outside uniform rectilinear motion.In this study,an approach employing a high-accuracy and quality-guaranteed mixed-integer piecewise-linear program(QG-PWL)is proposed for the EMTIP.This program can accommodate different effective interception ranges and complicated target motions(variable velocity or complicated trajectories).The high accuracy and quality guarantees of QG-PWL originate from elegant strategies such as piecewise linearization and other developed operation strategies.The approximate error in the intercept path length is proved to be bounded to h^(2)/(4√2),where h is the piecewise length.
基金supported by the National Natural Science Foundation of China(Grant Nos.52271307,52061135107,52192692,11802025)the Liao Ning Excellent Youth Fund Program(Grant No.2023JH3/10200012)+1 种基金the Liao Ning Revitalization Tal-ents Program(Grant No.XLYC1908027)the Fundamental Research Funds for the Central Universities(Grant Nos.DUT20RC(3)025,DUT20TD108,DUT20LAB308)。
文摘In order to investigate the penetration performance of Linear-Shaped Charge(LSC),Embowed LinearShaped Charge(ELSC),and Embowed Linear Explosively Formed Projectile(ELEFP)on T-shaped stiffened plates,a series of near-field air-burst experiments are conducted.The damage modes and characteristics of the target plates are compared and analyzed.Each flat plate section is completely punctured,resulting in a penetration hole.The damage modes induced by the three charge types on the stiffened plate structure are consistent,characterized by shear failure in the central region of the flat plate due to penetration by the penetrator,localized plastic deformation of the flat plate,and local penetration failure resulting from partial perforation of the central stiffener.The penetration lengths caused by ELSC and ELEFP are 45.1%and 46.1% larger than that of LSC,while the half-width of the penetration hole generated by ELEFP is 54.2% and 24.7% smaller than that of ELSC and LSC,respectively.The penetration height caused by ELEFP are 17.5%and 62.1% larger than that of ELSC and LSC,respectively.The stiffener effectively segments the damage area,enhancing the local structural strength and limiting the extent of plastic deformation in the flat plate section.The comparative results show that the ELSC proves to be more effective for efficient large-scale damage,and ELEFP is more suitable for achieving efficient localized damage.
文摘Dear Editor,Linear and whorled nevoid hypermelanosis(LWNH)is a rare,sporadic pigmentary disorder characterized by hyperpigmented macules arranged in linear streaks and whorls along Blaschko's lines,typically appearing within the first few weeks of life[1],and remains a challenge to treat.Here,we report a case of LWNH and review the relevant literature to help clinicians better understand this disease.
文摘Aim To present a simple and effective method for the design of nonlinear and time varying control system. Methods A new concept of dynamic equilibrium of a system and its stability were presented first. It was pointed out that what is controlled directly by the input of a control system is the system's dynamic equilibrium rather than the states. Based on it, a new feedback linearization method for nonlinear system based on the Lyapunov direct method was given. Simulation studies were also carried out. Results The example and simulation show that by use of the method, the controller design becomes very simple and the control effect is quite satisfying. Conclusion The new method unifies the stabilizing problem(regulating problem) with the tracking problem. It is a very simple and effective method for the design of nonlinear and time varying control system.
文摘A class of nonlinear and continuous type Leontief model and its corresponding conditional input-output equation are introduced, and two basic problems under the so called positive or negative boundary assumption are presented. By approaches of nonlinear analysis some solvability results of this equation and continuous perturbation properties of the relative solution sets are obtained, and some economic significance are illustrated by the remark.
基金supported by the National Natural Science Foundation of China (No.60975023)
文摘In order to design a nonlinear controller for small-scale autonomous helicopters, the dynamic characteristics of a model helicopter are investigated, and an integrated nonlinear model of a small-scale helicopter for hovering control is presented. It is proved that the nonlinear system of the small-scale helicopter can be transformed to a linear system using the dynamic feedback linearization technique. Finally, simulations are carried out to validate the nonlinear controller.
基金supported by the National Natural Science Foundation of China (Nos.:11002088,11172333,11272361)
文摘The equivalent linearization method （ELM） is modified to investigate the nonlinear flut- ter system of an airfoil with a cubic damping. After obtaining the linearization quantity of the cubic nonlinearity by the ELM, an equivalent system can be deduced and then investigated by linear flut- ter analysis methods. Different from the routine procedures of the ELM, the frequency rather than the amplitude of limit cycle oscillation （LCO） is chosen as an active increment to produce bifurca- tion charts. Numerical examples show that this modification makes the ELM much more efficient. Meanwhile, the LCOs obtained by the ELM are in good agreement with numerical solutions. The nonlinear damping can delay the occurrence of secondary bifurcation. On the other hand, it has marginal influence on bifurcation characteristics or LCOs.
基金supported by the National Natural Science Foundation of China (6071000260904007)+1 种基金the Program for Changjiang Scholars and Innovative Research Team in Universitythe State Key Laboratory of Robotics and System (SKLRS200801AO3)
文摘This paper is focused on developing a tracking controller for a hypersonic cruise vehicle using tangent linearization approach.The design of flight control systems for air-breathing hypersonic vehicles is a highly challenging task due to the unique characteristics of the vehicle dynamics.Motivated by recent results on tangent linearization control,the tracking control problem for the hypersonic cruise vehicle is reduced to that of a feedback stabilizing controller design for a linear time-varying system which can be accomplished by a standard design method of frozen-time control.Through a proper model transformation,it can be proven that the tracking error of the designed closed-loop system decays exponentially.Simulation studies are conducted for trimmed cruise conditions of 110000 ft and Mach 15 where the responses of the vehicle to step changes in altitude and velocity are evaluated.The effectiveness of the controller is demonstrated by simulation results.
基金supported by the National Natural Science Foundation of China(51679201)
文摘The impact angle control over guidance(IACG) law against stationary targets is proposed by using feedback linearization control(FLC) and finite time control(FTC). First, this paper transforms the kinematics equation of guidance systems into the feedbackable linearization model, in which the guidance law is obtained without considering the impact angle via FLC. For the purpose of the line of sight(LOS) angle and its rate converging to the desired values, the second-order LOS angle is considered as a double-integral system. Then, this paper utilizes FTC to design a controller which can guarantee the states of the double-integral system converging to the desired values. Numerical simulation illustrates the performance of the IACG, in contrast to the existing guidance law.
