In this paper,a framework is established for nonlinear flutter and gust response analyses based on an efficient Reduced Order Model(ROM).The proposed method can be used to solve the aeroelastic response problems of wi...In this paper,a framework is established for nonlinear flutter and gust response analyses based on an efficient Reduced Order Model(ROM).The proposed method can be used to solve the aeroelastic response problems of wings containing geometric nonlinearities.A structural modeling approach presented herein describes the stiffness nonlinearities with a modal formulation.Two orthogonal spanwise modes describe the foreshortening effects of the wing.Dynamic linearization of the ROM under nonlinear equilibrium states is applied to a nonlinear flutter analysis,and the fully nonlinear ROM coupled with the non-planar Unsteady Vortex Lattice Method(UVLM)is applied to gust response analysis.Furthermore,extended Precise Integration Method(PIM)ensures accuracy of the dynamic equation solutions.To demonstrate applicability and accuracy of the method presented,a wind tunnel test is conducted and good agreements between theoretical and test results of nonlinear flutter speed and gust response deflection are reached.The method described in this paper is suitable for predicting the nonlinear flutter speed and calculating the gust responses of a large-aspect-ratio wing in time domain.Meanwhile,the results derived highlight the effects of geometric nonlinearities obviously.展开更多
Recently, flutter active control using linear parameter varying（LPV） framework has attracted a lot of attention. LPV control synthesis usually generates controllers that are at least of the same order as the aeroela...Recently, flutter active control using linear parameter varying（LPV） framework has attracted a lot of attention. LPV control synthesis usually generates controllers that are at least of the same order as the aeroelastic models. Therefore, the reduced-order model is required by synthesis for avoidance of large computation cost and high-order controller. This paper proposes a new procedure for generation of accurate reduced-order linear time-invariant（LTI） models by using system identification from flutter testing data. The proposed approach is in two steps. The well-known poly-reference least squares complex frequency（p-LSCF） algorithm is firstly employed for modal parameter identification from frequency response measurement. After parameter identification,the dominant physical modes are determined by clear stabilization diagrams and clustering technique. In the second step, with prior knowledge of physical poles, the improved frequencydomain maximum likelihood（ML） estimator is presented for building accurate reduced-order model. Before ML estimation, an improved subspace identification considering the poles constraint is also proposed for initializing the iterative procedure. Finally, the performance of the proposed procedure is validated by real flight flutter test data.展开更多
A method of equivalent simplification,using equivalent-plate models(EPMs),is developed.It is to achieve goals of rapid modeling and effective analysis in structural dynamics and flutter analysis of complex wing struct...A method of equivalent simplification,using equivalent-plate models(EPMs),is developed.It is to achieve goals of rapid modeling and effective analysis in structural dynamics and flutter analysis of complex wing structures.It is on the assumption that the wing structures discussed are composed of skin,beams and ribs,and the different plate units(such as skin,beam web,rib web)are not distinguished in modeling,which is to avoid the complex pre-processing and make it more generalized.Taking the effect of transverse shear deformation into consideration,the equivalence is based on the first-order shear deformation theory,and it can import the model files of MSC/NASTRAN and process the information to accomplish the equivalent modeling.The Ritz method is applied with the Legendre polynomials,which is used to define the geometry,structure and displacements of the wing.Particularly,the selection of Legendre polynomials as trial functions brings good accuracy to the modeling and can avoid the ill-conditions.This is in contrast to the EPM method based on the classical plate theory.Through vibration and flutter analysis,the results obtained by using EPM agree well with those obtained by the finite element method,which indicates the accuracy and effectiveness in vibration and flutter analysis of the EPM method.展开更多
The present paper aims to reveal the significance of rigid-body motions for the flutter mechanism of a span-morphing wing model. The inclusion of rigid-body motions into aeroelastic formulation and flutter analysis is...The present paper aims to reveal the significance of rigid-body motions for the flutter mechanism of a span-morphing wing model. The inclusion of rigid-body motions into aeroelastic formulation and flutter analysis is presented. A state-space aeroelastic equation combining the dynamics of stepped Euler-Bernoulli beam with unsteady strip aerodynamic theory is developed by quasi-static modeling. Using a numerical example, variations of flutter mechanism from the bending-torsional flutter to the body-freedom flutter are observed as the span increases. In addition,effects of some dimensionless parameters on the variations of flutter mechanism are investigated.The investigated parameters belonging to the fuselage have limited influences on the bendingtorsional flutter but a significant impact on the body-freedom flutter.展开更多
The improved line sampling （LS） technique, an effective numerical simulation method, is employed to analyze the probabilistic characteristics and reliability sensitivity of flutter with random structural parameter i...The improved line sampling （LS） technique, an effective numerical simulation method, is employed to analyze the probabilistic characteristics and reliability sensitivity of flutter with random structural parameter in transonic flow. The improved LS technique is a novel methodology for reliability and sensitivity analysis of high dimensionality and low probability problem with implicit limit state function, and it does not require any approximating surrogate of the implicit limit state equation. The improved LS is used to estimate the flutter reliability and the sensitivity of a two-dimensional wing, in which some structural properties, such as frequency, parameters of gravity center and mass ratio, are considered as random variables. Computational fluid dynamics （CFD） based unsteady aerodynamic reduced order model （ROM） method is used to construct the aerodynamic state equations. Coupling structural state equations with aerodynamic state equations, the safety margin of flutter is founded by using the critical velocity of flutter. The results show that the improved LS technique can effectively decrease the computational cost in the random uncertainty analysis of flutter. The reliability sensitivity, defined by the partial derivative of the failure probability with respect to the distribution parameter of random variable, can help to identify the important parameters and guide the structural optimization design.展开更多
基金supported by the National Key Research and Development Program of China(No.2016YFB 0200703).
文摘In this paper,a framework is established for nonlinear flutter and gust response analyses based on an efficient Reduced Order Model(ROM).The proposed method can be used to solve the aeroelastic response problems of wings containing geometric nonlinearities.A structural modeling approach presented herein describes the stiffness nonlinearities with a modal formulation.Two orthogonal spanwise modes describe the foreshortening effects of the wing.Dynamic linearization of the ROM under nonlinear equilibrium states is applied to a nonlinear flutter analysis,and the fully nonlinear ROM coupled with the non-planar Unsteady Vortex Lattice Method(UVLM)is applied to gust response analysis.Furthermore,extended Precise Integration Method(PIM)ensures accuracy of the dynamic equation solutions.To demonstrate applicability and accuracy of the method presented,a wind tunnel test is conducted and good agreements between theoretical and test results of nonlinear flutter speed and gust response deflection are reached.The method described in this paper is suitable for predicting the nonlinear flutter speed and calculating the gust responses of a large-aspect-ratio wing in time domain.Meanwhile,the results derived highlight the effects of geometric nonlinearities obviously.
基金co-supported by the National Natural Science Foundation of China (Nos. 61134004 and 61573289)Aeronautical Science Foundation of China (No. 20140753010)the Fundamental Research Funds for the Central Universities (No. 3102015BJ004)
文摘Recently, flutter active control using linear parameter varying（LPV） framework has attracted a lot of attention. LPV control synthesis usually generates controllers that are at least of the same order as the aeroelastic models. Therefore, the reduced-order model is required by synthesis for avoidance of large computation cost and high-order controller. This paper proposes a new procedure for generation of accurate reduced-order linear time-invariant（LTI） models by using system identification from flutter testing data. The proposed approach is in two steps. The well-known poly-reference least squares complex frequency（p-LSCF） algorithm is firstly employed for modal parameter identification from frequency response measurement. After parameter identification,the dominant physical modes are determined by clear stabilization diagrams and clustering technique. In the second step, with prior knowledge of physical poles, the improved frequencydomain maximum likelihood（ML） estimator is presented for building accurate reduced-order model. Before ML estimation, an improved subspace identification considering the poles constraint is also proposed for initializing the iterative procedure. Finally, the performance of the proposed procedure is validated by real flight flutter test data.
文摘A method of equivalent simplification,using equivalent-plate models(EPMs),is developed.It is to achieve goals of rapid modeling and effective analysis in structural dynamics and flutter analysis of complex wing structures.It is on the assumption that the wing structures discussed are composed of skin,beams and ribs,and the different plate units(such as skin,beam web,rib web)are not distinguished in modeling,which is to avoid the complex pre-processing and make it more generalized.Taking the effect of transverse shear deformation into consideration,the equivalence is based on the first-order shear deformation theory,and it can import the model files of MSC/NASTRAN and process the information to accomplish the equivalent modeling.The Ritz method is applied with the Legendre polynomials,which is used to define the geometry,structure and displacements of the wing.Particularly,the selection of Legendre polynomials as trial functions brings good accuracy to the modeling and can avoid the ill-conditions.This is in contrast to the EPM method based on the classical plate theory.Through vibration and flutter analysis,the results obtained by using EPM agree well with those obtained by the finite element method,which indicates the accuracy and effectiveness in vibration and flutter analysis of the EPM method.
文摘The present paper aims to reveal the significance of rigid-body motions for the flutter mechanism of a span-morphing wing model. The inclusion of rigid-body motions into aeroelastic formulation and flutter analysis is presented. A state-space aeroelastic equation combining the dynamics of stepped Euler-Bernoulli beam with unsteady strip aerodynamic theory is developed by quasi-static modeling. Using a numerical example, variations of flutter mechanism from the bending-torsional flutter to the body-freedom flutter are observed as the span increases. In addition,effects of some dimensionless parameters on the variations of flutter mechanism are investigated.The investigated parameters belonging to the fuselage have limited influences on the bendingtorsional flutter but a significant impact on the body-freedom flutter.
基金Foundation items： National Natural Science Foundation of China （NSFC 10572117, 10802063, 50875213） National High-tech Research and Development Program （2007AA04Z401）+2 种基金 Aeronautical Science Foundation of China （2007ZA53012） New Century Program For Excellent Talents of Ministry of Education of China （NCET-05-0868） Ph.D. Program Foundation of Northwestern Polytechnical University （CX200801）.
文摘The improved line sampling （LS） technique, an effective numerical simulation method, is employed to analyze the probabilistic characteristics and reliability sensitivity of flutter with random structural parameter in transonic flow. The improved LS technique is a novel methodology for reliability and sensitivity analysis of high dimensionality and low probability problem with implicit limit state function, and it does not require any approximating surrogate of the implicit limit state equation. The improved LS is used to estimate the flutter reliability and the sensitivity of a two-dimensional wing, in which some structural properties, such as frequency, parameters of gravity center and mass ratio, are considered as random variables. Computational fluid dynamics （CFD） based unsteady aerodynamic reduced order model （ROM） method is used to construct the aerodynamic state equations. Coupling structural state equations with aerodynamic state equations, the safety margin of flutter is founded by using the critical velocity of flutter. The results show that the improved LS technique can effectively decrease the computational cost in the random uncertainty analysis of flutter. The reliability sensitivity, defined by the partial derivative of the failure probability with respect to the distribution parameter of random variable, can help to identify the important parameters and guide the structural optimization design.
