Nowadays,studies on the mechanism of macro-scopic nonlinear behavior of materials by accumulation of micro-scopic degradation are attracting more attention from researchers.Among numerous approaches,multiscale methods...Nowadays,studies on the mechanism of macro-scopic nonlinear behavior of materials by accumulation of micro-scopic degradation are attracting more attention from researchers.Among numerous approaches,multiscale methods have been proved as powerful and practical approaches in predicting macro-scopic material status by averaging and homogenizing physical information from associated micro-scopic mate-rial behavior.Usually in mechanical problem,the stress,consistent material modulus,and possible mate-rial state variables are quantities in interest through the upscaling process.However,the energy-related quantities are not studied much.Some initiative work has been done in the early year including but not limited to the Hill-Mandel condition in multiscale framework,which gives that the macro-scopic elastic strain energy density can be computed by volumetric averaging of that in the micro-scale.However,in the nonlinear analysis,the energy dissipation is an important quantity to measure the degradation status.In this manuscript,two typical multiscale methods,the first-order computational homogenization(FOCH)and reduced-order homogenization(ROH),are adopted to numerically analyze a fiber-reinforced compos-ite material with capability in material nonlinearity.With numerical experiments,it can be shown that energy dissipation is the same for both approaches.展开更多
现有电力负荷预测方法面临诸多挑战,尤其是在考虑气象因素对负荷波动的影响时,传统方法往往忽视气象特征与负荷之间复杂的非线性关系,导致预测精度不足。对此文中提出一种基于气象相似日修正(meteorological similar day correction,MS...现有电力负荷预测方法面临诸多挑战,尤其是在考虑气象因素对负荷波动的影响时,传统方法往往忽视气象特征与负荷之间复杂的非线性关系,导致预测精度不足。对此文中提出一种基于气象相似日修正(meteorological similar day correction,MSDC)和改进鹦鹉优化(improved parrot optimizer,IPO)线性分解(decomposition-based linear,DLinear)的日前电力负荷预测模型。首先运用Logistic映射、自适应变异策略、螺旋波动搜索IPO对DLinear超参数进行优化,然后由DLinear提取数据的周期性和趋势性特征,最后通过比对气象特征欧氏距离修正负荷预测值,形成基于IPO-DLinear-MSDC的日前电力负荷预测模型。采用2024年6月至10月湖南株洲地区总电力负荷数据集进行仿真分析,IPO-DLinear-MSDC模型的输出平均绝对百分比误差(mean absolute percentage error,MAPE)、决定系数R2分别为4.67%、0.833,相较于IPO-DLinear与PO-DLinear模型,MAPE分别下降了0.83个百分点、1.43个百分点,R2分别提升了0.074、0.125。展开更多
In this paper,we present a novel first-order digitalΣΔconverter tailored for digital-to-analog applications,focusing on achieving both high yield and reduced silicon estate.Our approach incorporates a substantial le...In this paper,we present a novel first-order digitalΣΔconverter tailored for digital-to-analog applications,focusing on achieving both high yield and reduced silicon estate.Our approach incorporates a substantial level of dithering noise into the input signal,strategically aimed at mitigating the spurious frequencies commonly encountered in such converters.Validation of our design is performed through simulations using a high-level simulator specialized in mixed-signal circuit analysis.The results underscore the enhanced performance of our circuit,especially in reducing spurious frequencies,highlighting its efficiency and effectiveness.The final circuit exhibits an effective number of bits of 13.展开更多
Long-term responses of floating structures pose a great concern in their design phase. Existing approaches for addressing long-term extreme responses are extremely cumbersome for adoption. This work aims to develop an...Long-term responses of floating structures pose a great concern in their design phase. Existing approaches for addressing long-term extreme responses are extremely cumbersome for adoption. This work aims to develop an approach for the long-term extreme-response analysis of floating structures. A modified gradient-based retrieval algorithm in conjunction with the inverse first-order reliability method(IFORM) is proposed to enable the use of convolution models in long-term extreme analysis of structures with an analytical formula of response amplitude operator(RAO). The proposed algorithm ensures convergence stability and iteration accuracy and exhibits a higher computational efficiency than the traditional backtracking method. However, when the RAO of general offshore structures cannot be analytically expressed, the convolutional integration method fails to function properly. A numerical discretization approach is further proposed for offshore structures in the case when the analytical expression of the RAO is not feasible. Through iterative discretization of environmental contours(ECs) and RAOs, a detailed procedure is proposed to calculate the long-term response extremes of offshore structures. The validity and accuracy of the proposed approach are tested using a floating offshore wind turbine as a numerical example. The long-term extreme heave responses of various return periods are calculated via the IFORM in conjunction with a numerical discretization approach. The environmental data corresponding to N-year structural responses are located inside the ECs, which indicates that the selection of design points directly along the ECs yields conservative design results.展开更多
In this paper, we propose a log-normal linear model whose errors are first-order correlated, and suggest a two-stage method for the efficient estimation of the conditional mean of the response variable at the original...In this paper, we propose a log-normal linear model whose errors are first-order correlated, and suggest a two-stage method for the efficient estimation of the conditional mean of the response variable at the original scale. We obtain two estimators which minimize the asymptotic mean squared error （MM） and the asymptotic bias （MB）, respectively. Both the estimators are very easy to implement, and simulation studies show that they are perform better.展开更多
Two new linear furocoumarins were isolated from Notopterygium incisum using silica gel,gel Sephadex LH-20 column chromatography,and preparative high-performance liquid chromatography.The structures of the new compound...Two new linear furocoumarins were isolated from Notopterygium incisum using silica gel,gel Sephadex LH-20 column chromatography,and preparative high-performance liquid chromatography.The structures of the new compounds were elucidated through analysis of spectroscopic evidence,including data obtained from high-resolution electrospray ionization mass spectrometry(HRESIMS)and nuclear magnetic resonance(NMR).The absolute configurations of Notoprenylate L(1)and Nototerprinol K(2)were further confirmed using electronic circular dichroism(ECD)calculations.Compound 1 demonstrated the ability to inhibit the expression of nitric oxide(NO),a pro-inflammatory factor,in lipopolysaccharide-induced RAW264.7 macrophages at a concentration of 7.5μmol/L,indicating its potential for anti-inflammatory activity.展开更多
The growing prevalence of exercise-induced tibial stress fractures demands wearable sensors capable of monitoring dynamic musculoskeletal loads with medical-grade precision.While flexible pressure-sensing insoles show...The growing prevalence of exercise-induced tibial stress fractures demands wearable sensors capable of monitoring dynamic musculoskeletal loads with medical-grade precision.While flexible pressure-sensing insoles show clinical potential,their development has been hindered by the intrinsic trade-off between high sensitivity and full-range linearity(R^(2)>0.99 up to 1 MPa)in conventional designs.Inspired by the tactile sensing mechanism of human skin,where dermal stratification enables wide-range pressure adaptation and ion-channelregulated signaling maintains linear electrical responses,we developed a dual-mechanism flexible iontronic pressure sensor(FIPS).This innovative design synergistically combines two bioinspired components:interdigitated fabric microstructures enabling pressure-proportional contact area expansion(αP1/3)and iontronic film facilitating self-adaptive ion concentration modulation(αP^(2/3)),which together generate a linear capacitance-pressure response(CαP).The FIPS achieves breakthrough performance:242 kPa^(-1)sensitivity with 0.997linearity across 0-1 MPa,yielding a record linear sensing factor(LSF=242,000).The design is validated across various substrates and ionic materials,demonstrating its versatility.Finally,the FIPS-driven design enables a smart insole demonstrating 1.8%error in tibial load assessment during gait analysis,outperforming nonlinear counterparts(6.5%error)in early fracture-risk prediction.The biomimetic design framework establishes a universal approach for developing high-performance linear sensors,establishing generalized principles for medical-grade wearable devices.展开更多
Rydberg-atom-based superheterodyne receivers integrate self-calibration,high sensitivity,a wide operational frequency range,and phase/frequency resolved detection capabilities,demonstrating broad application prospects...Rydberg-atom-based superheterodyne receivers integrate self-calibration,high sensitivity,a wide operational frequency range,and phase/frequency resolved detection capabilities,demonstrating broad application prospects as nextgeneration microwave receivers.Linear gain and linear dynamic range(LDR)are critical metrics for assessing receiver sensitivity and demodulation fidelity,respectively.We numerically solve the four-level master equation and then employ particle swarm optimization(PSO)algorithm to co-optimize linear gain and LDR in atomic superheterodyne receivers based on balanced homodyne detection.Further,we systematically account for dominant dephasing mechanisms in the simulation,encompassing spontaneous decay,transit dephasing,collision dephasing,laser linewidth dephasing,and Doppler averaging.Homodyne readout utilizes both the real and imaginary parts of polarizability for sensing.In the case of the photon shot noise limit,its signal-to-noise ratio(SNR)expression resembles that of direct optical-intensity readout.However,the inherent coherent subtraction operation in homodyne detection significantly suppresses common-mode noise,while appropriately increasing the reference beam power enhances the gain in practical experiments.Indeed,this co-optimization problem,characterized by a high-dimensional variable space,two objectives,and non-convexity,is well-suited for solution by PSO.In addition,probe and coupling detuning contribute equivalently to polarizability and compensate for each other owing to Doppler averaging,thereby reducing the optimization variable space by one.By adopting a product form of linear gain and LDR as the fitness function,the PSO achieves rapid convergence.Here,the effectiveness of the PSO results is verified via the total harmonic distortion(THD).The relative error-based LDR calculation method we proposed efficiently measures receiver response linearity with consuming fewer computational resources.This research is expected to offer valuable insights into enhancing the performance of Rydberg-atom-based superheterodyne receivers.展开更多
In this paper,we study a class of Linear Fractional Programming on a nonempty bounded set,called the Problem(LFP),and design a branch and bound algorithm to find the global optimal solution of the problem(LFP).First,w...In this paper,we study a class of Linear Fractional Programming on a nonempty bounded set,called the Problem(LFP),and design a branch and bound algorithm to find the global optimal solution of the problem(LFP).First,we convert the problem(LFP)to the equivalent problem(EP2).Secondly,by applying the linear relaxation technique to the problem(EP2),the linear relaxation programming problem(LRP2Y)was obtained.Then,the overall framework of the algorithm is given,and the convergence and complexity of the algorithm are analyzed.Finally,experimental results are listed to illustrate the effectiveness of the algorithm.展开更多
Knowing the precise relationship between fuel loading and reactivity is essential for guiding reactor criticality extrapolation and online refueling in molten salt reactors(MSRs).This study aims to explore and explain...Knowing the precise relationship between fuel loading and reactivity is essential for guiding reactor criticality extrapolation and online refueling in molten salt reactors(MSRs).This study aims to explore and explain the linear relationship between reactivity and the reciprocal of uranium concentration in thermal-spectrum MSRs.By applying neutron balance theory,we analyzed the neutron absorption cross sections of various nuclides in single-lattice models with varying fuel concentrations.Our findings reveal a simple linear correlation between reactivity and the reciprocal of uranium concentration,which can be explained from the perspective of nuclear reaction cross sections that adhere to the 1/v law in the thermal neutron spectrum.Furthermore,we identified that the neutron absorption single-group cross sections of structural materials and carrier salts exhibit an approximately linear relationship with the fission single-group cross section of ^(235) U;similarly,the reciprocal of ^(235)U’s fission cross section exhibits an approximately linear relationship with uranium concentration.This linear relationship deviates as the volume fraction of molten salt increases,due to a greater proportion of neutrons being captured in the resonance energy spectrum.However,it remains valid for molten salt volume fractions up to 25%and demonstrates broad applicability in the physical design and operation of thermal molten salt reactors.展开更多
This article studies the consensus problem with directed graphs for general linear multi-agent systems.New distributed state-feedback protocols with dynamic event-triggered(DET)mechanisms are proposed for directed gra...This article studies the consensus problem with directed graphs for general linear multi-agent systems.New distributed state-feedback protocols with dynamic event-triggered(DET)mechanisms are proposed for directed graphs that are strongly connected and weight-balanced,general strongly connected,and have spanning trees,respectively.It is proven that strictly positive minimum inter-event times(MIETs)are ensured using the designed DET mechanisms.Several numerical examples are presented to illustrate the effectiveness of the theoretical results.Compared with existing results,our results have the following merits:1)DET mechanisms are designed to determine the sampling instants,which can reduce the communication frequency between agents compared with static mechanisms;2)We focus on the consensus problem on directed graphs,which is more general than existing related results on undirected graphs;3)The existence of positive MIETs is shown to be guaranteed by the designed DET sampling strategies while existing related results can only exclude Zeno behavior.展开更多
The operational demands of a wide range significantly exacerbate combustion instability issues within ramjet combustor.To suppress combustion oscillations,an open-loop control system utilizing Linear Genetic Programmi...The operational demands of a wide range significantly exacerbate combustion instability issues within ramjet combustor.To suppress combustion oscillations,an open-loop control system utilizing Linear Genetic Programming(LGP)has been developed for a full-scale annular ramjet combustor.The LGP is used to generate control laws that include multi-frequency forcing.These laws are then transformed into square waves to actuate the solenoid valve,which modulates the kerosene supply for open-loop control.The results show that the duty cycle has little effect on instability amplitude,whereas an increase in frequency leads to a remarked reduction in combustion amplitude.After five generations evolvements,the pressure amplitude is reduced by 40.6% under the optimal control law generated by LGP.Furthermore,the machine learning process is depicted using a proximity map of control law similarity,with the search pathway visualized by the steepest descent.All individuals go forward to the upper left corner of the map with the evolution process,terminating at the optimal individual of the fifth generation.展开更多
NaNbO_(3)-based lead-free dielectric ceramics possess significant application prospects in the field of dielectric capacitors.However,their development is hindered by low recoverable energy storage density(W_(rec))and...NaNbO_(3)-based lead-free dielectric ceramics possess significant application prospects in the field of dielectric capacitors.However,their development is hindered by low recoverable energy storage density(W_(rec))and energy storage efficiency(η).Herein,novel NaNbO_(3)-based ceramics,(1-x)[0.7Na_(0.97)Sm_(0.01)NbO_(3)–0.3(Sr_(0.7)Bi_(0.2))(Ti_(0.8)Zr_(0.2))O_(3)]–xCaTiO_(3),were created by adding CaTiO_(3) linear dielectric,aiming to improve their energy storage performance(ESP).The phase structure,microstructure,dielectric properties,energy storage and charge–discharge performances of the ceramics were methodically analyzed.All components of the ceramics exhibit a perovskite structure consisting of two phases:antiferroelectric P-phase(AFE P)and antiferroelectric R-phase(AFE R),with the AFE R phase increasing as x rises.All ceramic surfaces exhibit clear grain morphology.The resultant ceramics have an appropriate dielectric constant and a small dielectric loss,which are beneficial for improving breakdown field strength(E_(b)).Finally,at an E_(b) of 470 kV/cm,0.85[0.7Na_(0.97)Sm_(0.01)NbO_(3)–0.3(Sr_(0.7)Bi_(0.2))(Ti_(0.8)Zr_(0.2))O_(3)]–0.15CaTiO_(3) ceramic achieves optimal ESP:W_(rec)=3.9 J/cm^(3),η=72.49%.In addition,it has remarkable stability with temperature and frequency in energy storage and displays ultrafast speed in the charge–discharge process(t_(0.9)=27 ns).展开更多
During the use of robotics in applications such as antiterrorism or combat,a motion-constrained pursuer vehicle,such as a Dubins unmanned surface vehicle(USV),must get close enough(within a prescribed zero or positive...During the use of robotics in applications such as antiterrorism or combat,a motion-constrained pursuer vehicle,such as a Dubins unmanned surface vehicle(USV),must get close enough(within a prescribed zero or positive distance)to a moving target as quickly as possible,resulting in the extended minimum-time intercept problem(EMTIP).Existing research has primarily focused on the zero-distance intercept problem,MTIP,establishing the necessary or sufficient conditions for MTIP optimality,and utilizing analytic algorithms,such as root-finding algorithms,to calculate the optimal solutions.However,these approaches depend heavily on the properties of the analytic algorithm,making them inapplicable when problem settings change,such as in the case of a positive effective range or complicated target motions outside uniform rectilinear motion.In this study,an approach employing a high-accuracy and quality-guaranteed mixed-integer piecewise-linear program(QG-PWL)is proposed for the EMTIP.This program can accommodate different effective interception ranges and complicated target motions(variable velocity or complicated trajectories).The high accuracy and quality guarantees of QG-PWL originate from elegant strategies such as piecewise linearization and other developed operation strategies.The approximate error in the intercept path length is proved to be bounded to h^(2)/(4√2),where h is the piecewise length.展开更多
In order to investigate the penetration performance of Linear-Shaped Charge(LSC),Embowed LinearShaped Charge(ELSC),and Embowed Linear Explosively Formed Projectile(ELEFP)on T-shaped stiffened plates,a series of near-f...In order to investigate the penetration performance of Linear-Shaped Charge(LSC),Embowed LinearShaped Charge(ELSC),and Embowed Linear Explosively Formed Projectile(ELEFP)on T-shaped stiffened plates,a series of near-field air-burst experiments are conducted.The damage modes and characteristics of the target plates are compared and analyzed.Each flat plate section is completely punctured,resulting in a penetration hole.The damage modes induced by the three charge types on the stiffened plate structure are consistent,characterized by shear failure in the central region of the flat plate due to penetration by the penetrator,localized plastic deformation of the flat plate,and local penetration failure resulting from partial perforation of the central stiffener.The penetration lengths caused by ELSC and ELEFP are 45.1%and 46.1% larger than that of LSC,while the half-width of the penetration hole generated by ELEFP is 54.2% and 24.7% smaller than that of ELSC and LSC,respectively.The penetration height caused by ELEFP are 17.5%and 62.1% larger than that of ELSC and LSC,respectively.The stiffener effectively segments the damage area,enhancing the local structural strength and limiting the extent of plastic deformation in the flat plate section.The comparative results show that the ELSC proves to be more effective for efficient large-scale damage,and ELEFP is more suitable for achieving efficient localized damage.展开更多
The Haicheng region,Liaoning,China,likely hosts a conjugate fault system comprising the NW-trending Haichenghe fault and NE-trending secondary faults.On February 4,1975,at 19:36 CST,an earthquake of M_(S)7.3 and inten...The Haicheng region,Liaoning,China,likely hosts a conjugate fault system comprising the NW-trending Haichenghe fault and NE-trending secondary faults.On February 4,1975,at 19:36 CST,an earthquake of M_(S)7.3 and intensity(MMI)IX hit the city of Haicheng,Liaoning,China.Although deep seismic profiling was previously conducted along the Haichenghe fault,the limited horizontal resolution in the shallow part prevented the recognition of kilometer-scale anomalies.The velocity structure characteristics of the Haichenghe fault and its NE-trending conjugate faults remain unclear.Using the extended range phase shift method,the high-resolution S-wave velocity structures are obtained by deploying a long,dense linear array of 55 short-period seismometers across the fault and NE-trending conjugate faults.The array length was 32 km and inter-station spacing was approximately 600 m,facilitating the collection of approximately 22 days of continuous waveform data.Employing the Extended Range Phase Shift(ERPS)method enabled the extraction of broadband 0.2–5 s Rayleigh wave phase velocity dispersion curves.The broadband dispersion data were used for inversion of the high-resolution S-wave velocity structure to a depth of 8 km from the surface.The velocity structure characteristics and seismicity of the Haichenghe fault and NE-trending conjugate faults were analyzed and compared with nearby fault gas measurements.Results show(1)shallow S-wave velocities show a low-high-low horizontal distribution,corresponding to basin-uplift-basin topography;(2)significant velocity contrasts occur across the Haichenghe fault:its SW segment(0–17 km)exhibits high velocities consistent with Paleoproterozoic crystalline basement(Pt_(1)),while the NE segment(17–32 km)shows low velocities related to Yanshanian intrusions(γ_(5))and Quaternary sediments.NE-trending conjugate faults display sharp velocity gradients marking fracture locations,with all faults being near-vertical to~8 km depth;(3)seismicity at 1–6 km depth mainly clusters in high-velocity zones;at 6–8 km depth,it concentrates beneath the Haichenghe fault in low-velocity areas and along NE-trending faults;(4)the seismic activity characteristics and fault zone width of the Haicheng he fault reflected by velocity imaging results are basically consistent with those obtained by the fault gas measurement method.展开更多
Dear Editor,Linear and whorled nevoid hypermelanosis(LWNH)is a rare,sporadic pigmentary disorder characterized by hyperpigmented macules arranged in linear streaks and whorls along Blaschko's lines,typically appea...Dear Editor,Linear and whorled nevoid hypermelanosis(LWNH)is a rare,sporadic pigmentary disorder characterized by hyperpigmented macules arranged in linear streaks and whorls along Blaschko's lines,typically appearing within the first few weeks of life[1],and remains a challenge to treat.Here,we report a case of LWNH and review the relevant literature to help clinicians better understand this disease.展开更多
Conventional PI control encounters some problems when dealing with large lag process in the presence of parameter uncertainties.For the typical first-order process,an observerbased linear active disturbance rejection ...Conventional PI control encounters some problems when dealing with large lag process in the presence of parameter uncertainties.For the typical first-order process,an observerbased linear active disturbance rejection control(LADRC)scheme is presented to cope with the difficulties,and a reduced-order observer scheme is proposed further.Some quantitative dynamic results with regard to non-overshoot characteristics are obtained.Finally,the performance boundaries of LADRC and PI control are explicitly compared with each other,which shows that the former is more superior in most cases.展开更多
Consensus problems of first-order multi-agent systems with multiple time delays are investigated in this paper. We discuss three cases： 1） continuous, 2） discrete, and 3） a continuous system with a proportional pl...Consensus problems of first-order multi-agent systems with multiple time delays are investigated in this paper. We discuss three cases： 1） continuous, 2） discrete, and 3） a continuous system with a proportional plus derivative controller. In each case, the system contains simultaneous communication and input time delays. Supposing a dynamic multi-agent system with directed topology that contains a globally reachable node, the sufficient convergence condition of the system is discussed with respect to each of the three cases based on the generalized Nyquist criterion and the frequency-domain analysis approach, yielding conclusions that are either less conservative than or agree with previously published results. We know that the convergence condition of the system depends mainly on each agent’s input time delay and the adjacent weights but is independent of the communication delay between agents, whether the system is continuous or discrete. Finally, simulation examples are given to verify the theoretical analysis.展开更多
The use of peat for the removal of nickel from aqueous solutions has been investigated at various pH values by means of static conditions. The present research shows that the ability of Ni to bind to peat increases as...The use of peat for the removal of nickel from aqueous solutions has been investigated at various pH values by means of static conditions. The present research shows that the ability of Ni to bind to peat increases as the pH value increases. The solutions reach adsorption equilibrium rapidly. A reasonable kinetic model, first-order in nickel concentration, has been developed and fitted to the adsorption of nickel （Ⅱ） onto peat. The first-order model provides a good correlation to the experimental data. The characteristic parameters of the Langmuir isotherm were determined at various temperatures. The relationship between kinetics and equilibrium isotherms was established through the forward- and backward-rate-constants, k~ and k2, and the equilibrium constant, K.展开更多
基金the National Natural Science Foundation of China(Grant No.11988102)is gratefully acknowledged.
文摘Nowadays,studies on the mechanism of macro-scopic nonlinear behavior of materials by accumulation of micro-scopic degradation are attracting more attention from researchers.Among numerous approaches,multiscale methods have been proved as powerful and practical approaches in predicting macro-scopic material status by averaging and homogenizing physical information from associated micro-scopic mate-rial behavior.Usually in mechanical problem,the stress,consistent material modulus,and possible mate-rial state variables are quantities in interest through the upscaling process.However,the energy-related quantities are not studied much.Some initiative work has been done in the early year including but not limited to the Hill-Mandel condition in multiscale framework,which gives that the macro-scopic elastic strain energy density can be computed by volumetric averaging of that in the micro-scale.However,in the nonlinear analysis,the energy dissipation is an important quantity to measure the degradation status.In this manuscript,two typical multiscale methods,the first-order computational homogenization(FOCH)and reduced-order homogenization(ROH),are adopted to numerically analyze a fiber-reinforced compos-ite material with capability in material nonlinearity.With numerical experiments,it can be shown that energy dissipation is the same for both approaches.
文摘现有电力负荷预测方法面临诸多挑战,尤其是在考虑气象因素对负荷波动的影响时,传统方法往往忽视气象特征与负荷之间复杂的非线性关系,导致预测精度不足。对此文中提出一种基于气象相似日修正(meteorological similar day correction,MSDC)和改进鹦鹉优化(improved parrot optimizer,IPO)线性分解(decomposition-based linear,DLinear)的日前电力负荷预测模型。首先运用Logistic映射、自适应变异策略、螺旋波动搜索IPO对DLinear超参数进行优化,然后由DLinear提取数据的周期性和趋势性特征,最后通过比对气象特征欧氏距离修正负荷预测值,形成基于IPO-DLinear-MSDC的日前电力负荷预测模型。采用2024年6月至10月湖南株洲地区总电力负荷数据集进行仿真分析,IPO-DLinear-MSDC模型的输出平均绝对百分比误差(mean absolute percentage error,MAPE)、决定系数R2分别为4.67%、0.833,相较于IPO-DLinear与PO-DLinear模型,MAPE分别下降了0.83个百分点、1.43个百分点,R2分别提升了0.074、0.125。
文摘In this paper,we present a novel first-order digitalΣΔconverter tailored for digital-to-analog applications,focusing on achieving both high yield and reduced silicon estate.Our approach incorporates a substantial level of dithering noise into the input signal,strategically aimed at mitigating the spurious frequencies commonly encountered in such converters.Validation of our design is performed through simulations using a high-level simulator specialized in mixed-signal circuit analysis.The results underscore the enhanced performance of our circuit,especially in reducing spurious frequencies,highlighting its efficiency and effectiveness.The final circuit exhibits an effective number of bits of 13.
基金Supported by the National Natural Science Foundation of China (Grant Nos.52088102 and 51879287)National Key Research and Development Program of China (Grant No.2022YFB2602301)。
文摘Long-term responses of floating structures pose a great concern in their design phase. Existing approaches for addressing long-term extreme responses are extremely cumbersome for adoption. This work aims to develop an approach for the long-term extreme-response analysis of floating structures. A modified gradient-based retrieval algorithm in conjunction with the inverse first-order reliability method(IFORM) is proposed to enable the use of convolution models in long-term extreme analysis of structures with an analytical formula of response amplitude operator(RAO). The proposed algorithm ensures convergence stability and iteration accuracy and exhibits a higher computational efficiency than the traditional backtracking method. However, when the RAO of general offshore structures cannot be analytically expressed, the convolutional integration method fails to function properly. A numerical discretization approach is further proposed for offshore structures in the case when the analytical expression of the RAO is not feasible. Through iterative discretization of environmental contours(ECs) and RAOs, a detailed procedure is proposed to calculate the long-term response extremes of offshore structures. The validity and accuracy of the proposed approach are tested using a floating offshore wind turbine as a numerical example. The long-term extreme heave responses of various return periods are calculated via the IFORM in conjunction with a numerical discretization approach. The environmental data corresponding to N-year structural responses are located inside the ECs, which indicates that the selection of design points directly along the ECs yields conservative design results.
基金The NSF(11271155) of ChinaResearch Fund(20070183023) for the Doctoral Program of Higher Education
文摘In this paper, we propose a log-normal linear model whose errors are first-order correlated, and suggest a two-stage method for the efficient estimation of the conditional mean of the response variable at the original scale. We obtain two estimators which minimize the asymptotic mean squared error （MM） and the asymptotic bias （MB）, respectively. Both the estimators are very easy to implement, and simulation studies show that they are perform better.
文摘Two new linear furocoumarins were isolated from Notopterygium incisum using silica gel,gel Sephadex LH-20 column chromatography,and preparative high-performance liquid chromatography.The structures of the new compounds were elucidated through analysis of spectroscopic evidence,including data obtained from high-resolution electrospray ionization mass spectrometry(HRESIMS)and nuclear magnetic resonance(NMR).The absolute configurations of Notoprenylate L(1)and Nototerprinol K(2)were further confirmed using electronic circular dichroism(ECD)calculations.Compound 1 demonstrated the ability to inhibit the expression of nitric oxide(NO),a pro-inflammatory factor,in lipopolysaccharide-induced RAW264.7 macrophages at a concentration of 7.5μmol/L,indicating its potential for anti-inflammatory activity.
基金supported by the National Natural Science Foundation of China(NSFC 52175281,52475315)Youth Innovation Promotion Association of CAS(2021382)。
文摘The growing prevalence of exercise-induced tibial stress fractures demands wearable sensors capable of monitoring dynamic musculoskeletal loads with medical-grade precision.While flexible pressure-sensing insoles show clinical potential,their development has been hindered by the intrinsic trade-off between high sensitivity and full-range linearity(R^(2)>0.99 up to 1 MPa)in conventional designs.Inspired by the tactile sensing mechanism of human skin,where dermal stratification enables wide-range pressure adaptation and ion-channelregulated signaling maintains linear electrical responses,we developed a dual-mechanism flexible iontronic pressure sensor(FIPS).This innovative design synergistically combines two bioinspired components:interdigitated fabric microstructures enabling pressure-proportional contact area expansion(αP1/3)and iontronic film facilitating self-adaptive ion concentration modulation(αP^(2/3)),which together generate a linear capacitance-pressure response(CαP).The FIPS achieves breakthrough performance:242 kPa^(-1)sensitivity with 0.997linearity across 0-1 MPa,yielding a record linear sensing factor(LSF=242,000).The design is validated across various substrates and ionic materials,demonstrating its versatility.Finally,the FIPS-driven design enables a smart insole demonstrating 1.8%error in tibial load assessment during gait analysis,outperforming nonlinear counterparts(6.5%error)in early fracture-risk prediction.The biomimetic design framework establishes a universal approach for developing high-performance linear sensors,establishing generalized principles for medical-grade wearable devices.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.62331024 and 62571549)the National Key Research and Development Program of China(Grant No.2022YFB2802804)。
文摘Rydberg-atom-based superheterodyne receivers integrate self-calibration,high sensitivity,a wide operational frequency range,and phase/frequency resolved detection capabilities,demonstrating broad application prospects as nextgeneration microwave receivers.Linear gain and linear dynamic range(LDR)are critical metrics for assessing receiver sensitivity and demodulation fidelity,respectively.We numerically solve the four-level master equation and then employ particle swarm optimization(PSO)algorithm to co-optimize linear gain and LDR in atomic superheterodyne receivers based on balanced homodyne detection.Further,we systematically account for dominant dephasing mechanisms in the simulation,encompassing spontaneous decay,transit dephasing,collision dephasing,laser linewidth dephasing,and Doppler averaging.Homodyne readout utilizes both the real and imaginary parts of polarizability for sensing.In the case of the photon shot noise limit,its signal-to-noise ratio(SNR)expression resembles that of direct optical-intensity readout.However,the inherent coherent subtraction operation in homodyne detection significantly suppresses common-mode noise,while appropriately increasing the reference beam power enhances the gain in practical experiments.Indeed,this co-optimization problem,characterized by a high-dimensional variable space,two objectives,and non-convexity,is well-suited for solution by PSO.In addition,probe and coupling detuning contribute equivalently to polarizability and compensate for each other owing to Doppler averaging,thereby reducing the optimization variable space by one.By adopting a product form of linear gain and LDR as the fitness function,the PSO achieves rapid convergence.Here,the effectiveness of the PSO results is verified via the total harmonic distortion(THD).The relative error-based LDR calculation method we proposed efficiently measures receiver response linearity with consuming fewer computational resources.This research is expected to offer valuable insights into enhancing the performance of Rydberg-atom-based superheterodyne receivers.
基金Supported by the National Natural Science Foundation of China(Grant Nos.12571317 and 12071133).
文摘In this paper,we study a class of Linear Fractional Programming on a nonempty bounded set,called the Problem(LFP),and design a branch and bound algorithm to find the global optimal solution of the problem(LFP).First,we convert the problem(LFP)to the equivalent problem(EP2).Secondly,by applying the linear relaxation technique to the problem(EP2),the linear relaxation programming problem(LRP2Y)was obtained.Then,the overall framework of the algorithm is given,and the convergence and complexity of the algorithm are analyzed.Finally,experimental results are listed to illustrate the effectiveness of the algorithm.
基金supported by the Youth Innovation Promotion Association of the Chinese Academy of Sciences(No.2020261)the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDA02010000)the Young Potential Program of the Shanghai Institute of Applied Physics,Chinese Academy of Sciences(No.SINAP-YXJH-202412)。
文摘Knowing the precise relationship between fuel loading and reactivity is essential for guiding reactor criticality extrapolation and online refueling in molten salt reactors(MSRs).This study aims to explore and explain the linear relationship between reactivity and the reciprocal of uranium concentration in thermal-spectrum MSRs.By applying neutron balance theory,we analyzed the neutron absorption cross sections of various nuclides in single-lattice models with varying fuel concentrations.Our findings reveal a simple linear correlation between reactivity and the reciprocal of uranium concentration,which can be explained from the perspective of nuclear reaction cross sections that adhere to the 1/v law in the thermal neutron spectrum.Furthermore,we identified that the neutron absorption single-group cross sections of structural materials and carrier salts exhibit an approximately linear relationship with the fission single-group cross section of ^(235) U;similarly,the reciprocal of ^(235)U’s fission cross section exhibits an approximately linear relationship with uranium concentration.This linear relationship deviates as the volume fraction of molten salt increases,due to a greater proportion of neutrons being captured in the resonance energy spectrum.However,it remains valid for molten salt volume fractions up to 25%and demonstrates broad applicability in the physical design and operation of thermal molten salt reactors.
基金supported in part by the Natural Science Foundation of China(62273227,92367203)the Open Research Project of the State Key Laboratory of Industrial Control Technology,China(ICT2024B68)。
文摘This article studies the consensus problem with directed graphs for general linear multi-agent systems.New distributed state-feedback protocols with dynamic event-triggered(DET)mechanisms are proposed for directed graphs that are strongly connected and weight-balanced,general strongly connected,and have spanning trees,respectively.It is proven that strictly positive minimum inter-event times(MIETs)are ensured using the designed DET mechanisms.Several numerical examples are presented to illustrate the effectiveness of the theoretical results.Compared with existing results,our results have the following merits:1)DET mechanisms are designed to determine the sampling instants,which can reduce the communication frequency between agents compared with static mechanisms;2)We focus on the consensus problem on directed graphs,which is more general than existing related results on undirected graphs;3)The existence of positive MIETs is shown to be guaranteed by the designed DET sampling strategies while existing related results can only exclude Zeno behavior.
基金support from the National Natural Science Foundation of China(No.12002372)the Young Elite Scientists Sponsorship Program by China Association for Science and Technology(No.2022QNRC001)the Natural Science Foundation of Hunan Province,China(No.2021JJ40674)。
文摘The operational demands of a wide range significantly exacerbate combustion instability issues within ramjet combustor.To suppress combustion oscillations,an open-loop control system utilizing Linear Genetic Programming(LGP)has been developed for a full-scale annular ramjet combustor.The LGP is used to generate control laws that include multi-frequency forcing.These laws are then transformed into square waves to actuate the solenoid valve,which modulates the kerosene supply for open-loop control.The results show that the duty cycle has little effect on instability amplitude,whereas an increase in frequency leads to a remarked reduction in combustion amplitude.After five generations evolvements,the pressure amplitude is reduced by 40.6% under the optimal control law generated by LGP.Furthermore,the machine learning process is depicted using a proximity map of control law similarity,with the search pathway visualized by the steepest descent.All individuals go forward to the upper left corner of the map with the evolution process,terminating at the optimal individual of the fifth generation.
基金Project supported by the Natural Science Foundation of Anhui Provincial Education Department(Grant No.KJ2019A0054)。
文摘NaNbO_(3)-based lead-free dielectric ceramics possess significant application prospects in the field of dielectric capacitors.However,their development is hindered by low recoverable energy storage density(W_(rec))and energy storage efficiency(η).Herein,novel NaNbO_(3)-based ceramics,(1-x)[0.7Na_(0.97)Sm_(0.01)NbO_(3)–0.3(Sr_(0.7)Bi_(0.2))(Ti_(0.8)Zr_(0.2))O_(3)]–xCaTiO_(3),were created by adding CaTiO_(3) linear dielectric,aiming to improve their energy storage performance(ESP).The phase structure,microstructure,dielectric properties,energy storage and charge–discharge performances of the ceramics were methodically analyzed.All components of the ceramics exhibit a perovskite structure consisting of two phases:antiferroelectric P-phase(AFE P)and antiferroelectric R-phase(AFE R),with the AFE R phase increasing as x rises.All ceramic surfaces exhibit clear grain morphology.The resultant ceramics have an appropriate dielectric constant and a small dielectric loss,which are beneficial for improving breakdown field strength(E_(b)).Finally,at an E_(b) of 470 kV/cm,0.85[0.7Na_(0.97)Sm_(0.01)NbO_(3)–0.3(Sr_(0.7)Bi_(0.2))(Ti_(0.8)Zr_(0.2))O_(3)]–0.15CaTiO_(3) ceramic achieves optimal ESP:W_(rec)=3.9 J/cm^(3),η=72.49%.In addition,it has remarkable stability with temperature and frequency in energy storage and displays ultrafast speed in the charge–discharge process(t_(0.9)=27 ns).
基金supported by the National Natural Sci‐ence Foundation of China(Grant No.62306325)。
文摘During the use of robotics in applications such as antiterrorism or combat,a motion-constrained pursuer vehicle,such as a Dubins unmanned surface vehicle(USV),must get close enough(within a prescribed zero or positive distance)to a moving target as quickly as possible,resulting in the extended minimum-time intercept problem(EMTIP).Existing research has primarily focused on the zero-distance intercept problem,MTIP,establishing the necessary or sufficient conditions for MTIP optimality,and utilizing analytic algorithms,such as root-finding algorithms,to calculate the optimal solutions.However,these approaches depend heavily on the properties of the analytic algorithm,making them inapplicable when problem settings change,such as in the case of a positive effective range or complicated target motions outside uniform rectilinear motion.In this study,an approach employing a high-accuracy and quality-guaranteed mixed-integer piecewise-linear program(QG-PWL)is proposed for the EMTIP.This program can accommodate different effective interception ranges and complicated target motions(variable velocity or complicated trajectories).The high accuracy and quality guarantees of QG-PWL originate from elegant strategies such as piecewise linearization and other developed operation strategies.The approximate error in the intercept path length is proved to be bounded to h^(2)/(4√2),where h is the piecewise length.
基金supported by the National Natural Science Foundation of China(Grant Nos.52271307,52061135107,52192692,11802025)the Liao Ning Excellent Youth Fund Program(Grant No.2023JH3/10200012)+1 种基金the Liao Ning Revitalization Tal-ents Program(Grant No.XLYC1908027)the Fundamental Research Funds for the Central Universities(Grant Nos.DUT20RC(3)025,DUT20TD108,DUT20LAB308)。
文摘In order to investigate the penetration performance of Linear-Shaped Charge(LSC),Embowed LinearShaped Charge(ELSC),and Embowed Linear Explosively Formed Projectile(ELEFP)on T-shaped stiffened plates,a series of near-field air-burst experiments are conducted.The damage modes and characteristics of the target plates are compared and analyzed.Each flat plate section is completely punctured,resulting in a penetration hole.The damage modes induced by the three charge types on the stiffened plate structure are consistent,characterized by shear failure in the central region of the flat plate due to penetration by the penetrator,localized plastic deformation of the flat plate,and local penetration failure resulting from partial perforation of the central stiffener.The penetration lengths caused by ELSC and ELEFP are 45.1%and 46.1% larger than that of LSC,while the half-width of the penetration hole generated by ELEFP is 54.2% and 24.7% smaller than that of ELSC and LSC,respectively.The penetration height caused by ELEFP are 17.5%and 62.1% larger than that of ELSC and LSC,respectively.The stiffener effectively segments the damage area,enhancing the local structural strength and limiting the extent of plastic deformation in the flat plate section.The comparative results show that the ELSC proves to be more effective for efficient large-scale damage,and ELEFP is more suitable for achieving efficient localized damage.
基金supported by the Special Fund of the Institute of Geophysics,China Earthquake Administration,(No.DQJB21B34).
文摘The Haicheng region,Liaoning,China,likely hosts a conjugate fault system comprising the NW-trending Haichenghe fault and NE-trending secondary faults.On February 4,1975,at 19:36 CST,an earthquake of M_(S)7.3 and intensity(MMI)IX hit the city of Haicheng,Liaoning,China.Although deep seismic profiling was previously conducted along the Haichenghe fault,the limited horizontal resolution in the shallow part prevented the recognition of kilometer-scale anomalies.The velocity structure characteristics of the Haichenghe fault and its NE-trending conjugate faults remain unclear.Using the extended range phase shift method,the high-resolution S-wave velocity structures are obtained by deploying a long,dense linear array of 55 short-period seismometers across the fault and NE-trending conjugate faults.The array length was 32 km and inter-station spacing was approximately 600 m,facilitating the collection of approximately 22 days of continuous waveform data.Employing the Extended Range Phase Shift(ERPS)method enabled the extraction of broadband 0.2–5 s Rayleigh wave phase velocity dispersion curves.The broadband dispersion data were used for inversion of the high-resolution S-wave velocity structure to a depth of 8 km from the surface.The velocity structure characteristics and seismicity of the Haichenghe fault and NE-trending conjugate faults were analyzed and compared with nearby fault gas measurements.Results show(1)shallow S-wave velocities show a low-high-low horizontal distribution,corresponding to basin-uplift-basin topography;(2)significant velocity contrasts occur across the Haichenghe fault:its SW segment(0–17 km)exhibits high velocities consistent with Paleoproterozoic crystalline basement(Pt_(1)),while the NE segment(17–32 km)shows low velocities related to Yanshanian intrusions(γ_(5))and Quaternary sediments.NE-trending conjugate faults display sharp velocity gradients marking fracture locations,with all faults being near-vertical to~8 km depth;(3)seismicity at 1–6 km depth mainly clusters in high-velocity zones;at 6–8 km depth,it concentrates beneath the Haichenghe fault in low-velocity areas and along NE-trending faults;(4)the seismic activity characteristics and fault zone width of the Haicheng he fault reflected by velocity imaging results are basically consistent with those obtained by the fault gas measurement method.
文摘Dear Editor,Linear and whorled nevoid hypermelanosis(LWNH)is a rare,sporadic pigmentary disorder characterized by hyperpigmented macules arranged in linear streaks and whorls along Blaschko's lines,typically appearing within the first few weeks of life[1],and remains a challenge to treat.Here,we report a case of LWNH and review the relevant literature to help clinicians better understand this disease.
基金supported by the National Natural Science Foundation of China(60774088)the National High Technology Research and Development Program of China(863 Program)(2009AA04Z132)the Specialized Research Fund for the Doctoral Program of Higher Education of China(20090031110029)
文摘Conventional PI control encounters some problems when dealing with large lag process in the presence of parameter uncertainties.For the typical first-order process,an observerbased linear active disturbance rejection control(LADRC)scheme is presented to cope with the difficulties,and a reduced-order observer scheme is proposed further.Some quantitative dynamic results with regard to non-overshoot characteristics are obtained.Finally,the performance boundaries of LADRC and PI control are explicitly compared with each other,which shows that the former is more superior in most cases.
基金Project supported in part by the National Natural Science Foundation of China (Grant Nos. 60973114 and 61170249)in part by the Natural Science Foundation of CQCSTC (Grant Nos. 2009BA2024 and cstc2011jjA1320)in part by the State Key Laboratory of Power Transmission Equipment & System Securityand New Technology, Chongqing University (Grant No. 2007DA10512711206)
文摘Consensus problems of first-order multi-agent systems with multiple time delays are investigated in this paper. We discuss three cases： 1） continuous, 2） discrete, and 3） a continuous system with a proportional plus derivative controller. In each case, the system contains simultaneous communication and input time delays. Supposing a dynamic multi-agent system with directed topology that contains a globally reachable node, the sufficient convergence condition of the system is discussed with respect to each of the three cases based on the generalized Nyquist criterion and the frequency-domain analysis approach, yielding conclusions that are either less conservative than or agree with previously published results. We know that the convergence condition of the system depends mainly on each agent’s input time delay and the adjacent weights but is independent of the communication delay between agents, whether the system is continuous or discrete. Finally, simulation examples are given to verify the theoretical analysis.
基金Projects [2006]331 supported by the Scientific Research Foundation for the Returned Overseas Chinese Scholars070712 by the Key Laboratory ofNuclear Resources and Environment,Ministry of Education of China
文摘The use of peat for the removal of nickel from aqueous solutions has been investigated at various pH values by means of static conditions. The present research shows that the ability of Ni to bind to peat increases as the pH value increases. The solutions reach adsorption equilibrium rapidly. A reasonable kinetic model, first-order in nickel concentration, has been developed and fitted to the adsorption of nickel （Ⅱ） onto peat. The first-order model provides a good correlation to the experimental data. The characteristic parameters of the Langmuir isotherm were determined at various temperatures. The relationship between kinetics and equilibrium isotherms was established through the forward- and backward-rate-constants, k~ and k2, and the equilibrium constant, K.
