Wood nondestructive testing （NDT） is one of the high efficient methods in utilizing wood. This paper explained the principle of log defect testing by using stress wave, and analyzed the effects of sensor quantity on...Wood nondestructive testing （NDT） is one of the high efficient methods in utilizing wood. This paper explained the principle of log defect testing by using stress wave, and analyzed the effects of sensor quantity on defect testing results by using stress wave in terms of image fitting degree and error rate. The results showed that for logs with diameter ranging from 20 to 40 cm, at least 12 sensors were needed to meet the requirement which ensure a high testing accuracy of roughly 90% of fitness with 0.1 of error rate. And 10 sensors were recommended to judge the possible locations of defects and 6 sensors were sufficient to decide whether there were defects or not.展开更多
Based on the variational theory, a wavelet-based numerical method is developed to calculate the defect states of acoustic waves in two-dimensional phononic crystals with point and line defects. The supercell technique...Based on the variational theory, a wavelet-based numerical method is developed to calculate the defect states of acoustic waves in two-dimensional phononic crystals with point and line defects. The supercell technique is applied. By expanding the displacement field and the material constants （mass density and elastic stiffness） in periodic wavelets, the explicit formulations of an eigenvalue problem for the plane harmonic bulk waves in such a phononic structure are derived. The point and line defect states in solid-liquid and solid-solid systems are calculated. Comparisons of the present results with those measured experimentally or those from the plane wave expansion method show that the present method can yield accurate results with faster convergence and less computing time.展开更多
In this paper, defects detection in brazed weldment with lattice structure is studied using ultrasonic Lamb wave. Based on the ultrasonic guided wave theory, the frequency dispersion curves for phase and group velocit...In this paper, defects detection in brazed weldment with lattice structure is studied using ultrasonic Lamb wave. Based on the ultrasonic guided wave theory, the frequency dispersion curves for phase and group velocity of I Cr18Ni9Ti are obtained by solving the Rayleigh-Lamb equation. The incident angles of different modes are determined through theoretical calculation and experimental analyses. Artificial defects of through-wall slots with different dimensions are made and tested. Experimental scattering effects of the fundamental symmetric mode S2 and asymmetric modes A1 and A0 are analysed and compared. The results show that mode Ao is suitable for detecting artificial defect, and the amplitude of the received signals are in good agreement with the defect size. Brazed weldment specimen containing lack of brazing with certain dimensions is made. Using the same methodology, scattering effects produced by weld defects are measured. The results show that the clutter wave brought about by the filler metal will certainly disturbs the identification of defect signal. But, when the defect is 3.0 mm in width, the presented mode Ao could be used potentially.展开更多
Using a stiffness matrix method, we in- vestigate the propagation behaviors of elastic waves in one-dimensional （1D） piezoelectric/piezomagnetic （PE/PM） phononic crystals （PCs） with line defects by calculating e...Using a stiffness matrix method, we in- vestigate the propagation behaviors of elastic waves in one-dimensional （1D） piezoelectric/piezomagnetic （PE/PM） phononic crystals （PCs） with line defects by calculating energy reflection/transmittion coefficients of quasi-pressure and quasi-shear waves. Line defects are created by the re- placement of PE or PM constituent layer. The defect modes existing in the first gap are considered and the influences on defect modes of the material properties and volume fraction of the defect layers, the type of incident waves, the location of defect layer and the number of structural layers are discussed in detail. Numerical results indicate that defect modes are the most obvious when the defect layers are inserted in the middle of the perfect PCs; the types of incidence wave and material properties of the defect layers have important effects on the numbers, the location of frequencies and the peaks of defect modes, and the defect modes are strongly de- pendent on volume fraction of the defect layers. We hope this paper will be found useful for the design of PE/PM acoustic filters or acoustic transducer with PCs structures.展开更多
The evolution and transition of planar wave trains propagating through defects(obstacles) in an excitable medium are studied. When the frequency of the planar wave trains is increased, three different dynamical regime...The evolution and transition of planar wave trains propagating through defects(obstacles) in an excitable medium are studied. When the frequency of the planar wave trains is increased, three different dynamical regimes,namely fusion, "V" waves, and spiral waves, are observed in turn and the underlying mechanism is discussed. The dynamics is concerned with the shapes of the defects. Circle, triangle, and rectangle defects with different sizes are considered. The increase of pacing frequency broadens the fan-shaped broken region in the behind of a rectangle defect.The increase of width of a triangle defect leads to breakup of wave trains easier while the change of height shows opposite effect, which is presented in a phase diagram. Dynamical comparison on defects with different shapes indicates that the decrease of the defect width along the propagation of wave trains makes the fan-shaped region and the minimal frequency for breakup of spiral both increased.展开更多
We consider a discrete model that describes a linear chain of particles coupled to an isolated ring composed of N defects. This simple system can be regarded as a generalization of the familiar Fano Anderson model. It...We consider a discrete model that describes a linear chain of particles coupled to an isolated ring composed of N defects. This simple system can be regarded as a generalization of the familiar Fano Anderson model. It can be used to model discrete networks of coupled defect modes in photonic crystals and simple waveguide arrays in two-dimensional lattices. The analytical result of the transmission coefficient is obtained, along with the conditions for perfect reflections and transmissions due to either destructive or constructive interferences. Using a simple example, we further investigate the relationship between the resonant frequencies and the number of defects N, and study how to affect the numbers of perfect reflections and transmissions. In addition, we demonstrate how these resonance transmissions and refections can be tuned by one nonlinear defect of the network that possesses a nonlinear Kerr-like response.展开更多
A rockbolt acting in the rock mass is subjected to the combined action of the pull-out load and confining pressure, and the bond quality of the rockbolt directly affects the stability of the roadway and cavern. Theref...A rockbolt acting in the rock mass is subjected to the combined action of the pull-out load and confining pressure, and the bond quality of the rockbolt directly affects the stability of the roadway and cavern. Therefore, in this study, confining pressure and pull-out load are applied to grouted rockbolt systems with bond defects by a numerical simulation method, and the rockbolt is detected by ultrasonic guided waves to study the propagation law of ultrasonic guided waves in defective rockbolt systems and the bond quality of rockbolts under the combined action of pull-out load and confining pressure. The numerical simulation results show that the length and location of bond defects can be detected by ultrasonic guided waves under the combined action of pull-out load and confining pressure. Under no pull-out load, with increasing confining pressure, the low-frequency part of the guided wave frequency in the rockbolt increases, the high-frequency part decreases, the weakening effect of the confining pressure on the guided wave propagation law increases, and the bond quality of the rockbolt increases. The existence of defects cannot change the strengthening effect of the confining pressure on the guided wave propagation law under the same pull-out load or the weakening effect of the pull-out load on the guided wave propagation law under the same confining pressure.展开更多
基金This paper was supported by the project "Devel-opment of Portable NDT Instrument (2002(39-1))" sponsored by Na-tional Forestry Administrative Bureau of China
文摘Wood nondestructive testing （NDT） is one of the high efficient methods in utilizing wood. This paper explained the principle of log defect testing by using stress wave, and analyzed the effects of sensor quantity on defect testing results by using stress wave in terms of image fitting degree and error rate. The results showed that for logs with diameter ranging from 20 to 40 cm, at least 12 sensors were needed to meet the requirement which ensure a high testing accuracy of roughly 90% of fitness with 0.1 of error rate. And 10 sensors were recommended to judge the possible locations of defects and 6 sensors were sufficient to decide whether there were defects or not.
基金the National Natural Science Foundation of China(No.10632020)the German Research Foundation(No.ZH 15/11-1)jointly by the China Scholarship Council and the German Academic Exchange Service(No.D/08/01795).
文摘Based on the variational theory, a wavelet-based numerical method is developed to calculate the defect states of acoustic waves in two-dimensional phononic crystals with point and line defects. The supercell technique is applied. By expanding the displacement field and the material constants （mass density and elastic stiffness） in periodic wavelets, the explicit formulations of an eigenvalue problem for the plane harmonic bulk waves in such a phononic structure are derived. The point and line defect states in solid-liquid and solid-solid systems are calculated. Comparisons of the present results with those measured experimentally or those from the plane wave expansion method show that the present method can yield accurate results with faster convergence and less computing time.
基金This project is supported by International Cooperation Project （2007DFR70070）, National Natural Science Foundation （50775054）, Fundamental Research Funds for the Central Universities （ Grant No. HIT. NSRIF. 2009035 ） and China Postdoctoral Seienee Foundation （20080440873）.
文摘In this paper, defects detection in brazed weldment with lattice structure is studied using ultrasonic Lamb wave. Based on the ultrasonic guided wave theory, the frequency dispersion curves for phase and group velocity of I Cr18Ni9Ti are obtained by solving the Rayleigh-Lamb equation. The incident angles of different modes are determined through theoretical calculation and experimental analyses. Artificial defects of through-wall slots with different dimensions are made and tested. Experimental scattering effects of the fundamental symmetric mode S2 and asymmetric modes A1 and A0 are analysed and compared. The results show that mode Ao is suitable for detecting artificial defect, and the amplitude of the received signals are in good agreement with the defect size. Brazed weldment specimen containing lack of brazing with certain dimensions is made. Using the same methodology, scattering effects produced by weld defects are measured. The results show that the clutter wave brought about by the filler metal will certainly disturbs the identification of defect signal. But, when the defect is 3.0 mm in width, the presented mode Ao could be used potentially.
基金supported by the National Natural Science Foundation of China(11102122)
文摘Using a stiffness matrix method, we in- vestigate the propagation behaviors of elastic waves in one-dimensional （1D） piezoelectric/piezomagnetic （PE/PM） phononic crystals （PCs） with line defects by calculating energy reflection/transmittion coefficients of quasi-pressure and quasi-shear waves. Line defects are created by the re- placement of PE or PM constituent layer. The defect modes existing in the first gap are considered and the influences on defect modes of the material properties and volume fraction of the defect layers, the type of incident waves, the location of defect layer and the number of structural layers are discussed in detail. Numerical results indicate that defect modes are the most obvious when the defect layers are inserted in the middle of the perfect PCs; the types of incidence wave and material properties of the defect layers have important effects on the numbers, the location of frequencies and the peaks of defect modes, and the defect modes are strongly de- pendent on volume fraction of the defect layers. We hope this paper will be found useful for the design of PE/PM acoustic filters or acoustic transducer with PCs structures.
基金Supported by the Natural Science Foundation of Zhejiang Province under Grant Nos.LQ14A050003 and LR17A050001Zhejiang Province Commonweal Projects under Grant No.GK180906288001China Scholarship Council under Grant No.201708330401
文摘The evolution and transition of planar wave trains propagating through defects(obstacles) in an excitable medium are studied. When the frequency of the planar wave trains is increased, three different dynamical regimes,namely fusion, "V" waves, and spiral waves, are observed in turn and the underlying mechanism is discussed. The dynamics is concerned with the shapes of the defects. Circle, triangle, and rectangle defects with different sizes are considered. The increase of pacing frequency broadens the fan-shaped broken region in the behind of a rectangle defect.The increase of width of a triangle defect leads to breakup of wave trains easier while the change of height shows opposite effect, which is presented in a phase diagram. Dynamical comparison on defects with different shapes indicates that the decrease of the defect width along the propagation of wave trains makes the fan-shaped region and the minimal frequency for breakup of spiral both increased.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 11147173 and 61106052)the Zhejiang Education Department, China (Grant No. Y201018926 and Y200908466)+2 种基金the Basic Research Foundation of Jilin University,China (Grant No. 93K172011K02)the Basic Research Foundation of Zhejiang Ocean University, the Nature Science Foundation of Zhejiang Province, China (Grant No. 1047172)the Open Foundation from Ocean Fishery Science and Technology in the Most Important Subjects of Zhejiang, China (No. 20110105)
文摘We consider a discrete model that describes a linear chain of particles coupled to an isolated ring composed of N defects. This simple system can be regarded as a generalization of the familiar Fano Anderson model. It can be used to model discrete networks of coupled defect modes in photonic crystals and simple waveguide arrays in two-dimensional lattices. The analytical result of the transmission coefficient is obtained, along with the conditions for perfect reflections and transmissions due to either destructive or constructive interferences. Using a simple example, we further investigate the relationship between the resonant frequencies and the number of defects N, and study how to affect the numbers of perfect reflections and transmissions. In addition, we demonstrate how these resonance transmissions and refections can be tuned by one nonlinear defect of the network that possesses a nonlinear Kerr-like response.
文摘A rockbolt acting in the rock mass is subjected to the combined action of the pull-out load and confining pressure, and the bond quality of the rockbolt directly affects the stability of the roadway and cavern. Therefore, in this study, confining pressure and pull-out load are applied to grouted rockbolt systems with bond defects by a numerical simulation method, and the rockbolt is detected by ultrasonic guided waves to study the propagation law of ultrasonic guided waves in defective rockbolt systems and the bond quality of rockbolts under the combined action of pull-out load and confining pressure. The numerical simulation results show that the length and location of bond defects can be detected by ultrasonic guided waves under the combined action of pull-out load and confining pressure. Under no pull-out load, with increasing confining pressure, the low-frequency part of the guided wave frequency in the rockbolt increases, the high-frequency part decreases, the weakening effect of the confining pressure on the guided wave propagation law increases, and the bond quality of the rockbolt increases. The existence of defects cannot change the strengthening effect of the confining pressure on the guided wave propagation law under the same pull-out load or the weakening effect of the pull-out load on the guided wave propagation law under the same confining pressure.
