Catalytic decomposition of methane,which produces high-purity hydrogen and high-value-added carbon nanomaterials,has shown considerable potential for development and is expected to yield significant economic benefits ...Catalytic decomposition of methane,which produces high-purity hydrogen and high-value-added carbon nanomaterials,has shown considerable potential for development and is expected to yield significant economic benefits in the future.However,designing catalysts that simultaneously exhibit high activity and long-term stability remains a significant challenge.Tuning the catalyst’s structure and electronic properties is an effective strategy for enhancing the reaction performance.In this work,a series of NixZr/ZSM-5 catalysts were prepared using the incipient wetness impregnation method,and the effect of Zr loadings on catalyst properties and performance was systematically investigated.The calcined and reduced catalysts were characterized by low-temperature N_(2)adsorption-desorption,XRD,SEM,H_(2)-TPR and XPS.The results showed that the addition of Zr significantly increased the specific surface area of the catalyst and reduced the metal particle size.Smaller NiO particles were found to enter the pores of the HZSM-5 support,and electronic interactions between NiO and ZrO_(2)markedly enhanced the metal-support interaction.The catalyst exhibited optimal catalytic performance at a Zr loading of 5%,achieving a maximum methane conversion of 68%at 625℃,maintaining activity for 900 min,and delivering a carbon yield of 1927%.Further increasing the Zr loading yielded only limited improvements in catalytic performance.Characterization of the spent catalysts and carbon products via TEM,Raman spectroscopy,and TGA revealed that the introduction of ZrO_(2)reduced metal sintering and promoted a shift in carbon nanofibers growth mode from tip-growth to base-growth.The mechanism of base-growth enabled the catalyst to maintain reaction activity for an extended period.展开更多
Chemical warfare agents(CWAs)remain a persistent hazard in many parts of the world,necessitating a deeper exploration of their chemical and physical characteristics and reactions under diverse conditions.Diisopropyl m...Chemical warfare agents(CWAs)remain a persistent hazard in many parts of the world,necessitating a deeper exploration of their chemical and physical characteristics and reactions under diverse conditions.Diisopropyl methylphosphonate(DIMP),a commonly used CWA surrogate,is widely studied to enhance our understanding of CWA behavior.The prevailing thermal decomposition model for DIMP,developed approximately 25 years ago,is based on data collected in nitrogen atmospheres at temperatures ranging from 700 K to 800 K.Despite its limitations,this model continues to serve as a foundation for research across various thermal and reactive environments,including combustion studies.Our recent experiments have extended the scope of decomposition analysis by examining DIMP in both nitrogen and zero air across a lower temperature range of 175℃ to 250℃.Infrared spectroscopy results under nitrogen align well with the established model;however,we observed that catalytic effects,stemming from decomposition byproducts and interactions with stainless steel surfaces,alter the reaction kinetics.In zero air environments,we observed a novel infrared absorption band.Spectral fitting suggests this band may represent a combination of propanal and acetone,while GCMS analysis points to vinyl formate and acetone as possible constituents.Although the precise identity of these new products remains unresolved,our findings clearly indicate that the existing decomposition model cannot be reliably extended to lower temperatures or non-nitrogen environments without further revisions.展开更多
The sulfation and decomposition process has proven effective in selectively extracting lithium from lepidolite.It is essential to clarify the thermochemical behavior and kinetic parameters of decomposition reactions.A...The sulfation and decomposition process has proven effective in selectively extracting lithium from lepidolite.It is essential to clarify the thermochemical behavior and kinetic parameters of decomposition reactions.Accordingly,comprehensive kinetic study by employing thermalgravimetric analysis at various heating rates was presented in this paper.Two main weight loss regions were observed during heating.The initial region corresponded to the dehydration of crystal water,whereas the subsequent region with overlapping peaks involved complex decomposition reactions.The overlapping peaks were separated into two individual reaction peaks and the activation energy of each peak was calculated using isoconversional kinetics methods.The activation energy of peak 1 exhibited a continual increase as the reaction conversion progressed,while that of peak 2 steadily decreased.The optimal kinetic models,identified as belonging to the random nucleation and subsequent growth category,provided valuable insights into the mechanism of the decomposition reactions.Furthermore,the adjustment factor was introduced to reconstruct the kinetic mechanism models,and the reconstructed models described the kinetic mechanism model more accurately for the decomposition reactions.This study enhanced the understanding of the thermochemical behavior and kinetic parameters of the lepidolite sulfation product decomposition reactions,further providing theoretical basis for promoting the selective extraction of lithium.展开更多
In the image fusion field,fusing infrared images(IRIs)and visible images(VIs)excelled is a key area.The differences between IRIs and VIs make it challenging to fuse both types into a high-quality image.Accordingly,eff...In the image fusion field,fusing infrared images(IRIs)and visible images(VIs)excelled is a key area.The differences between IRIs and VIs make it challenging to fuse both types into a high-quality image.Accordingly,efficiently combining the advantages of both images while overcoming their shortcomings is necessary.To handle this challenge,we developed an end-to-end IRI andVI fusionmethod based on frequency decomposition and enhancement.By applying concepts from frequency domain analysis,we used the layering mechanism to better capture the salient thermal targets from the IRIs and the rich textural information from the VIs,respectively,significantly boosting the image fusion quality and effectiveness.In addition,the backbone network combined Restormer Blocks and Dense Blocks;Restormer blocks utilize global attention to extract shallow features.Meanwhile,Dense Blocks ensure the integration between shallow and deep features,thereby avoiding the loss of shallow attributes.Extensive experiments on TNO and MSRS datasets demonstrated that the suggested method achieved state-of-the-art(SOTA)performance in various metrics:Entropy(EN),Mutual Information(MI),Standard Deviation(SD),The Structural Similarity Index Measure(SSIM),Fusion quality(Qabf),MI of the pixel(FMI_(pixel)),and modified Visual Information Fidelity(VIF_(m)).展开更多
Upper Andean tropical forests are renowned for their extraordinary biodiversity and heterogeneous environmental conditions.Despite the critical role of litter decomposition in carbon and nutrient cycles,its dynamics i...Upper Andean tropical forests are renowned for their extraordinary biodiversity and heterogeneous environmental conditions.Despite the critical role of litter decomposition in carbon and nutrient cycles,its dynamics in this region remains unexplored at finer scales.This study investigates how micro site conditions influence litter decomposition of 15 upper Andean species over time.A reciprocal translocation field experiment was conducted over 18 months in 14 permanent plots within four sites in Colombian Andean mountain forests.Each plot contained three litterbeds(microsites),each with the 15 species,harvested at 3,6,12 and 18 months,totaling 2520 litterbags.Different forest variables,including canopy openness,leaf area index,slope and depth of litter,were measured in each litterbed.ANOVAs and linear mixed models were used to assess variation between sites and plots respectively,while multiple linear regression analyses evaluated the effects of forest variables on decay rates over time at the micro site scale.Results showed differences in absolute decay rates between sites but consistent relative decay rates,indicating varying magnitudes of decomposition,yet maintaining the same order based on their litter quality.Decay rates varied between species,with more variation in labile species compared to recalcitrant ones.Despite substantial variation in forest characteristics within sites,their influence on litter decomposition was minimal and declined over time.This suggests that,at finer spatial scales,the forest microenvironment plays a lesser role in litter decomposition,with litter quality emerging as the primary driver.This study is a step towards understanding the fine-scale dynamics of litter decomposition in upper Andean tropical forests,highlighting the intricate interplay between microenvironmental factors and decomposition processes.展开更多
Shock waves in the nozzle during supersonic separation under different conditions can disrupt the flow field’s thermodynamic equilibrium.While it contributes to the recovery of pressure energy,it also leads to the di...Shock waves in the nozzle during supersonic separation under different conditions can disrupt the flow field’s thermodynamic equilibrium.While it contributes to the recovery of pressure energy,it also leads to the dissipation of mechanical energy.This study aimed to investigate the effects of changes in back pressure on the shock wave position and its subsequent impact on the refrigeration performance of nozzles.A mathematical model for the supersonic gas in a nozzle was established and evaluated via experiments.The results show that when the back pressure is less than 0.2 MPa,no shock wave is generated in the nozzle,and high refrigeration and liquefaction efficiency can be ensured while effective pressure recovery is achieved.When the back pressure(pb)is increased from 0.3 to 0.6 MPa,the refrigeration efficiency of the nozzle decreases,and the shock wave position(x shock)is advanced from 157 to 118 mm.The maximum Mach number(Ma)that can be reached by the fluid in the nozzle is reduced from 1.97 to 1.27.When the back pressure is increased from 0.2 to 0.6 MPa,the minimum temperature is increased by 55.18 K.When the back pressure is greater than 0.3 MPa,the Mach number upstream of the shock wave is reduced from 1.97 to 1.27,the shock wave intensity is weakened,and the thickness of the boundary layer separation caused by the shock wave is also decreased accordingly.Therefore,to ensure refrigeration efficiency,measures should be taken to control the back pressure within a reasonable range.展开更多
Evaluating the effectivenes s of forest restoration projects is crucial for designing adaptive restoration strategies.However,existing studies have primarily focused on ecological outcomes while overlooking cost input...Evaluating the effectivenes s of forest restoration projects is crucial for designing adaptive restoration strategies.However,existing studies have primarily focused on ecological outcomes while overlooking cost inputs.This gap can lead to increased uncertainties in restoration planning.Here we investigated forest dynamics in China's Upper Yangtze River Basin(UYRB)using kernel Normalized Difference Vegetation Index(kNDVI),Leaf Area Index(LAI),Gross Primary Productivity(GPP),Ku-band Vegetation Optical Depth(Ku-VOD)time series and climate data from1982 to 2020.Subsequently,we employed a residual trend analysis integrating temporal effects to determine the relative contributions of climate change and human activities to forest dynamics before and after the implementation of forest restoration engineering in 1998.Additionally,we developed an Afforestation Efficiency Index(AEI)to quantitatively assess the cost efficiency of afforestation projects.Results indicated that forest in the UYRB showed sustained increases during 1982-2020,with most areas experiencing greater growth after 1998 than before.Temporal effects of climatic factors influenced over 42.7%of the forest,and incorporating time-lag and cumulative effects enhanced climate-based explanations of forest variations by 1.61-24.73%.Human activities emerged as the dominant driver of forest dynamics post 1998,whereas climate variables predominated before this period.The cost-effectiveness of forest restoration projects in the UYRB typically ranges from moderate to high,with higher success predominantly observed in the northeastern and eastern counties,while the central,western,and northwestern counties mainly showed relatively low efficiency.These findings stress the need for assessing forest restoration outcomes from both ecological and cost perspectives,and can offer valuable insights for optimizing the layout of forest restoration initiatives in the UYRB.展开更多
Theauthor proposes a dual layer source grid load storage collaborative planning model based on Benders decomposition to optimize the low-carbon and economic performance of the distribution network.The model plans the ...Theauthor proposes a dual layer source grid load storage collaborative planning model based on Benders decomposition to optimize the low-carbon and economic performance of the distribution network.The model plans the configuration of photovoltaic(3.8 MW),wind power(2.5 MW),energy storage(2.2 MWh),and SVC(1.2 Mvar)through interaction between upper and lower layers,and modifies lines 2–3,8–9,etc.to improve transmission capacity and voltage stability.The author uses normal distribution and Monte Carlo method to model load uncertainty,and combines Weibull distribution to describe wind speed characteristics.Compared to the traditional three-layer model(TLM),Benders decomposition-based two-layer model(BLBD)has a 58.1%reduction in convergence time(5.36 vs.12.78 h),a 51.1%reduction in iteration times(23 vs.47 times),a 8.07%reduction in total cost(12.436 vs.13.528 million yuan),and a 9.62%reduction in carbon emissions(12,456 vs.13,782 t).After optimization,the peak valley difference decreased from4.1 to 2.9MW,the renewable energy consumption rate reached 93.4%,and the energy storage efficiency was 87.6%.Themodel has been validated in the IEEE 33 node system,demonstrating its superiority in terms of economy,low-carbon,and reliability.展开更多
The goal of the present work is to demonstrate the potential of Artificial Neural Network(ANN)-driven Genetic Algorithm(GA)methods for energy efficiency and economic performance optimization of energy efficiency measu...The goal of the present work is to demonstrate the potential of Artificial Neural Network(ANN)-driven Genetic Algorithm(GA)methods for energy efficiency and economic performance optimization of energy efficiency measures in a multi-family house building in Greece.The energy efficiency measures include different heating/cooling systems(such as low-temperature and high-temperature heat pumps,natural gas boilers,split units),building envelope components for floor,walls,roof and windows of variable heat transfer coefficients,the installation of solar thermal collectors and PVs.The calculations of the building loads and investment and operating and maintenance costs of the measures are based on the methodology defined in Directive 2010/31/EU,while economic assumptions are based on EN 15459-1 standard.Typically,multi-objective optimization of energy efficiency measures often requires the simulation of very large numbers of cases involving numerous possible combinations,resulting in intense computational load.The results of the study indicate that ANN-driven GA methods can be used as an alternative,valuable tool for reliably predicting the optimal measures which minimize primary energy consumption and life cycle cost of the building with greatly reduced computational requirements.Through GA methods,the computational time needed for obtaining the optimal solutions is reduced by 96.4%-96.8%.展开更多
A nonfused ring electron acceptor(NFREA),designated as TT-Ph-C6,has been synthesized with the aim of enhancing the power conversion efficiency(PCE)of organic solar cells(OSCs).By integrating asymmetric phenylalkylamin...A nonfused ring electron acceptor(NFREA),designated as TT-Ph-C6,has been synthesized with the aim of enhancing the power conversion efficiency(PCE)of organic solar cells(OSCs).By integrating asymmetric phenylalkylamino side groups,TT-Ph-C6 demonstrates excellent solubility and its crystal structure exhibits compact packing structures with a three-dimensional molecular stacking network.These structural attributes markedly promote exciton diffusion and charge carrier mobility,particularly advantageous for the fabrication of thick-film devices.TT-Ph-C6-based devices have attained a PCE of 18.01%at a film thickness of 100 nm,and even at a film thickness of 300 nm,the PCE remains at 14.64%,surpassing that of devices based on 2BTh-2F.These remarkable properties position TT-Ph-C6 as a highly promising NFREA material for boosting the efficiency of OSCs.展开更多
Hard carbon is a vital anode material for sodium-ion batteries;however,the nonuniform growth of solid electrolyte interphase(SEI)film substantially diminishes its initial coulombic efficiency(ICE)and cycle life.The ch...Hard carbon is a vital anode material for sodium-ion batteries;however,the nonuniform growth of solid electrolyte interphase(SEI)film substantially diminishes its initial coulombic efficiency(ICE)and cycle life.The chemical and morphological properties of surface highly influence the electrode/electrolyte interfacial reactions.In this study,we have tuned orbital hybridization states forming an interface enriched with sp^(2) hybridized carbon(sp^(2)-C),which decreases the binding energy to solvent molecules and inhibits excessive solvent decomposition during SEI formation.Benefiting from successfully constructed inorganic-rich SEI,the ICE increased to 91%and sodium storage capacity reached 346 mAh/g.Besides,the capacity retention rate was 90.7%after 700 cycles at 1 A/g higher than pristine electrode(83.8%).展开更多
The microstructural evolution of Cu−19Ni−6Cr−7Mn alloy during aging treatment was investigated.After aging for 120 min at 500℃,the alloy exhibited excellent mechanical properties,including a tensile strength of 978 M...The microstructural evolution of Cu−19Ni−6Cr−7Mn alloy during aging treatment was investigated.After aging for 120 min at 500℃,the alloy exhibited excellent mechanical properties,including a tensile strength of 978 MPa and an elastic modulus of 145.8 GPa.After aging for 240 min at 500℃,the elastic modulus of the alloy reached 149.5 GPa,which was among the highest values reported for Cu alloys.It was worth mentioning that the tensile strength increased rapidly from 740 to 934 MPa after aging for 5 min at 500℃,which was close to the maximum tensile strength(978 MPa).Analysis of the underlying strengthening mechanisms and phase transformation behavior revealed that the Cu−19Ni−6Cr−7Mn alloy underwent spinodal decomposition and DO_(22) ordering during the first 5 min of aging at 500℃,and L1_(2) ordered phases and bcc-Cr precipitates appeared.Therefore,the enhanced mechanical properties of the Cu−19Ni−6Cr−7Mn alloy can be attributed to the stress field generated by spinodal decomposition and the presence of nanoscale ordered phase and Cr precipitates.展开更多
A series of blue and blue‑green Ir(Ⅲ)complexes has been investigated theoretically to explore their electronic structures,photophysical properties,efficiency roll‑off effect,and thermal activation delayed fluorescenc...A series of blue and blue‑green Ir(Ⅲ)complexes has been investigated theoretically to explore their electronic structures,photophysical properties,efficiency roll‑off effect,and thermal activation delayed fluorescence(TADF)properties.All calculations were performed using density functional theory(DFT)and time‑dependent density functional theory(TDDFT).Calculations for electronic structures,frontier molecular orbital characteristics(which determine the efficiency roll‑off effect of the complexes),and photophysical properties were conducted using the Gaussian 09 software package.The calculation of spin‑orbit coupling matrix elements<T|HSOC|S>,which determine the TADF properties of the complexes,was performed using the ORCA software package.The calculation results show that the auxiliary ligand tetraphenylimidodiphosphinate(tpip),a strong electron‑withdrawing group,can mitigate the efficiency roll‑off effect of the complex.Furthermore,TADF is observed in one of the designed complexes,(F_(3)Phppy)_(2)Ir(tpip),where F_(3)Phppy=2‑[4‑(2,4,6‑trifluorophenyl)phenyl]pyridine.展开更多
Coordinating light and nitrogen(N)distribution within a canopy is essential for improving rice yield and resource use efficiency.However,limited research has examined light and N distribution in response to planting d...Coordinating light and nitrogen(N)distribution within a canopy is essential for improving rice yield and resource use efficiency.However,limited research has examined light and N distribution in response to planting density and N rate,and their relationships with grain yield,radiation use efficiency(RUE),and N use efficiency for grain production(NUEg)in rice.A two-year field experiment was conducted with two hybrid varieties under three N levels,0 kg ha^(-1)(N1),90 kg ha^(-1)(N2)and 180 kg ha^(-1)(N3),and two planting densities,22.2 hills m-2(D1)and 33.3 hills m^(-2)(D2).Results showed 3.4%higher yield and 4.4%higher NUEg under N2D2 compared with N3D1.The extinction coefficient for N(K_(N))and light(K_(L))and their ratio(K_(N)/K_(L))at heading stage were significantly influenced by N rate,planting density,and their interaction.K_(N)decreased with the increase of N input or planting density.Compared to N1,K_(N)decreased by 43.5 and 58.8%under N2 and N3,respectively,while K_(N)under D2 decreased by 16.0%compared to D1.Higher K_(L)and K_(N)/K_(L)values occurred under low N rates,with opposite trends under high N rates.Increased planting density led to decreased K_(L)and K_(N)/K_(L)values.N2D2 demonstrated higher K_(L)and K_(N),and thus comparable K_(N)/K_(L),compared to N3D1.Correlation analysis revealed K_(L)negatively correlated with RUE,while K_(N)and K_(N)/K_(L)positively correlated with NUEg.These findings indicate that increasing planting density under reduced N input could maintain rice yield while enhancing resource use efficiency through regulation of canopy light and N distribution.展开更多
In dry-coupled ultrasonic thickness measurement,thick rubber layers introduce high-amplitude parasitic echoes that obscure defect signals and degrade thickness accuracy.Existing methods struggle to resolve overlap-pin...In dry-coupled ultrasonic thickness measurement,thick rubber layers introduce high-amplitude parasitic echoes that obscure defect signals and degrade thickness accuracy.Existing methods struggle to resolve overlap-ping echoes under variable coupling conditions and non-stationary noise.This study proposes a novel dual-criterion framework integrating energy contribution and statistical impulsivity metrics to isolate specimen re-flections from coupling-layer interference.By decomposing A-scan signals into Intrinsic Mode Functions(IMFs),the framework employs energy contribution thresholds(>85%)and kurtosis indices(>3)to autonomously select IMFs containing valid specimen echoes.Hybrid time-frequency thresholding further suppresses interference through amplitude filtering and spectral focusing.Experimental results demonstrate the framework’s robustness,achieving 92.3%thickness accuracy for 5 mm steel specimens with 5 mm rubber coupling,outperforming conventional methods by up to 18.7%.The dual-criterion approach reduces operator dependency by 37%and maintainsΔT<0.03 mm under surface roughness up to 6.3μm,offering a practical solution for industrial nondestructive testing with thick dry-coupled interfaces.展开更多
Transforming urban spatial structures to promote green and low-carbon development is an effective strategy.Although prior studies have examined the impact of urban polycentricity on carbon emissions and economic devel...Transforming urban spatial structures to promote green and low-carbon development is an effective strategy.Although prior studies have examined the impact of urban polycentricity on carbon emissions and economic development,research on its role in the synergistic relationship between these factors regarding carbon emission efficiency is limited.Furthermore,existing literature often overlooks nonlinear effects and interactions with other urban variables.This paper analyzed data from 295 Chinese cities in 2020,calculating urban population polycentricity,population dispersion indices,and carbon emission efficiency.Utilizing local spatial autocorrelation tools,we reveal interactions among urban population polycentricity,dispersion,carbon emissions,and carbon emission efficiency.We then employ a gradient boosting decision tree model(GBDT)to explore nonlinear and synergistic effects of polycentric urbanization.Key findings include:1)polycentric urbanization in Chinese cities exhibits significant spatial differentiation characteristics.The Polycentricity index is relatively high in economically developed eastern coastal regions with an overall low level,carbon emissions are concentrated in industrialized north-central cities and some Yangtze River Delta hubs,and carbon emission efficiency is the highest in the Yangtze River Delta while relatively low in Northeast China;there are significant spatially heterogeneous interaction characteristics among population polycentricity,population dispersion,carbon emissions,and carbon emission efficiency.2)Urban population polycentricity contributes 9.42%to total carbon emissions and 6.24%to carbon emission efficiency.3)The polycentricity index has a nonlinear impact on carbon emissions and carbon emission efficiency:no significant effect when below 0.50 or above 0.55,increased carbon emissions in 0.50-0.53,and reduced carbon emissions with improved efficiency in 0.53-0.55.4)The polycentricity index has an interaction effect with other variables;specifically,when the polycentricity index is between 0.53 and 0.55,its interaction with urban gross domestic product(GDP),urban population,urban built-up area,green coverage rate in built-up areas,urban technological expenditure,and the proportion of the output value of the secondary industry will reduce carbon emissions and improve carbon emission efficiency.These findings enhance the understanding of urban spatial structures and carbon emissions,providing valuable insights for policymakers in developing green and low-carbon strategies.展开更多
A high-sensitivity,low-noise single photon avalanche diode(SPAD)detector was presented based on a 180 nm BCD process.The proposed device utilizes a p-implant layer/high-voltage n-well(HVNW)junction to form a deep aval...A high-sensitivity,low-noise single photon avalanche diode(SPAD)detector was presented based on a 180 nm BCD process.The proposed device utilizes a p-implant layer/high-voltage n-well(HVNW)junction to form a deep avalanche multiplication region for near-infrared(NIR)sensitivity enhancement.By optimizing the device size and electric field of the guard ring,the fill factor(FF)is significantly improved,further increasing photon detection efficiency(PDE).To solve the dark noise caused by the increasing active diameter,a field polysilicon gate structure connected to the p+anode was investigated,effectively suppressing dark count noise by 76.6%.It is experimentally shown that when the active diameter increases from 5 to 10μm,the FF is significantly improved from 20.7%to 39.1%,and thus the peak PDE also rises from 13.3%to 25.8%.At an excess bias voltage of 5 V,a NIR photon detection probability(PDP)of 6.8%at 905 nm,a dark count rate(DCR)of 2.12 cps/μm^(2),an afterpulsing probability(AP)of 1.2%,and a timing jitter of 216 ps are achieved,demonstrating excellent single photon detection performance.展开更多
Emerging and powerful genome editing tools,particularly CRISPR/Cas9,are facilitating functional genomics research and accelerating crop improvement(Jiang et al.2021;Cao et al.2023;Chen C et al.2023;Liu et al.2023a).Ho...Emerging and powerful genome editing tools,particularly CRISPR/Cas9,are facilitating functional genomics research and accelerating crop improvement(Jiang et al.2021;Cao et al.2023;Chen C et al.2023;Liu et al.2023a).However,the detection and screening of transgenic lines remain major bottlenecks,being time-consuming,labor-intensive,and inefficient during transformation and subsequent mutation identification.A simple and efficient visual marker system plays a critical role in addressing these challenges.Recent studies demonstrated that the GmW1 and RUBY reporter systems were used to obtain visual transgenic soybean(Glycine max) plants(Chen L et al.2023;Chen et al.2024).展开更多
Nanoporous Gd2O3 powders(NGPs) with different specific surface areas were prepared by a nonaqueous sol-gel method and utilized to tune the exothermal decomposition of ammonium perchlorate(AP) for enhanced propellant e...Nanoporous Gd2O3 powders(NGPs) with different specific surface areas were prepared by a nonaqueous sol-gel method and utilized to tune the exothermal decomposition of ammonium perchlorate(AP) for enhanced propellant efficiency and improved safety.It is found that with the increasing dosage of NGPs into AP,the two exothermal peaks of AP merge into one intense exothermal peak,indicating that an "energy stacking" has been achieved.Meanwhile,the unique delay of the first exothermal peak of AP is conducive to the safety of AP in application process.Furthermore,the dependence of decomposition heat of AP on dosage and calcination temperature is more evident than on the surface areas of NGPs,suggesting that the promotion effect of NGPs on the thermal decomposition of AP does not only rely on the surface interaction.Therefore,an electron transfer mechanism is proposed to illustrate the decomposition process of AP tuned by NGPs.展开更多
In order to find the dominant factor of energy efficiency change, this paper uses the modified structural model to analyze energy efficiency change from 1990 to 2012 in Xinjiang. The result shows that the energy effic...In order to find the dominant factor of energy efficiency change, this paper uses the modified structural model to analyze energy efficiency change from 1990 to 2012 in Xinjiang. The result shows that the energy efficiency increase is largely due to energy technological innovation especially by the industrial sector, and the contribution from structural shift is limited. Therefore, we should vigorously support energy-saving technological progress in the industrial sector and develop the modern service industries with lower energy consumption, in order to realize the goal of improving energy efficiency.展开更多
基金Supported by Innovative Research Groups of the National Natural Science Foundation of China(22021004)。
文摘Catalytic decomposition of methane,which produces high-purity hydrogen and high-value-added carbon nanomaterials,has shown considerable potential for development and is expected to yield significant economic benefits in the future.However,designing catalysts that simultaneously exhibit high activity and long-term stability remains a significant challenge.Tuning the catalyst’s structure and electronic properties is an effective strategy for enhancing the reaction performance.In this work,a series of NixZr/ZSM-5 catalysts were prepared using the incipient wetness impregnation method,and the effect of Zr loadings on catalyst properties and performance was systematically investigated.The calcined and reduced catalysts were characterized by low-temperature N_(2)adsorption-desorption,XRD,SEM,H_(2)-TPR and XPS.The results showed that the addition of Zr significantly increased the specific surface area of the catalyst and reduced the metal particle size.Smaller NiO particles were found to enter the pores of the HZSM-5 support,and electronic interactions between NiO and ZrO_(2)markedly enhanced the metal-support interaction.The catalyst exhibited optimal catalytic performance at a Zr loading of 5%,achieving a maximum methane conversion of 68%at 625℃,maintaining activity for 900 min,and delivering a carbon yield of 1927%.Further increasing the Zr loading yielded only limited improvements in catalytic performance.Characterization of the spent catalysts and carbon products via TEM,Raman spectroscopy,and TGA revealed that the introduction of ZrO_(2)reduced metal sintering and promoted a shift in carbon nanofibers growth mode from tip-growth to base-growth.The mechanism of base-growth enabled the catalyst to maintain reaction activity for an extended period.
基金sponsored by the Department of Defense,Defense Threat Reduction Agency under the Materials Science in Extreme Environments University Research Alliance,HDTRA1-20-2-0001。
文摘Chemical warfare agents(CWAs)remain a persistent hazard in many parts of the world,necessitating a deeper exploration of their chemical and physical characteristics and reactions under diverse conditions.Diisopropyl methylphosphonate(DIMP),a commonly used CWA surrogate,is widely studied to enhance our understanding of CWA behavior.The prevailing thermal decomposition model for DIMP,developed approximately 25 years ago,is based on data collected in nitrogen atmospheres at temperatures ranging from 700 K to 800 K.Despite its limitations,this model continues to serve as a foundation for research across various thermal and reactive environments,including combustion studies.Our recent experiments have extended the scope of decomposition analysis by examining DIMP in both nitrogen and zero air across a lower temperature range of 175℃ to 250℃.Infrared spectroscopy results under nitrogen align well with the established model;however,we observed that catalytic effects,stemming from decomposition byproducts and interactions with stainless steel surfaces,alter the reaction kinetics.In zero air environments,we observed a novel infrared absorption band.Spectral fitting suggests this band may represent a combination of propanal and acetone,while GCMS analysis points to vinyl formate and acetone as possible constituents.Although the precise identity of these new products remains unresolved,our findings clearly indicate that the existing decomposition model cannot be reliably extended to lower temperatures or non-nitrogen environments without further revisions.
基金financially supported by the National Natural Science Foundation of China(Nos.52034002 and U2202254)the Fundamental Research Funds for the Central Universities,China(No.FRF-TT-19-001)。
文摘The sulfation and decomposition process has proven effective in selectively extracting lithium from lepidolite.It is essential to clarify the thermochemical behavior and kinetic parameters of decomposition reactions.Accordingly,comprehensive kinetic study by employing thermalgravimetric analysis at various heating rates was presented in this paper.Two main weight loss regions were observed during heating.The initial region corresponded to the dehydration of crystal water,whereas the subsequent region with overlapping peaks involved complex decomposition reactions.The overlapping peaks were separated into two individual reaction peaks and the activation energy of each peak was calculated using isoconversional kinetics methods.The activation energy of peak 1 exhibited a continual increase as the reaction conversion progressed,while that of peak 2 steadily decreased.The optimal kinetic models,identified as belonging to the random nucleation and subsequent growth category,provided valuable insights into the mechanism of the decomposition reactions.Furthermore,the adjustment factor was introduced to reconstruct the kinetic mechanism models,and the reconstructed models described the kinetic mechanism model more accurately for the decomposition reactions.This study enhanced the understanding of the thermochemical behavior and kinetic parameters of the lepidolite sulfation product decomposition reactions,further providing theoretical basis for promoting the selective extraction of lithium.
基金funded by Anhui Province University Key Science and Technology Project(2024AH053415)Anhui Province University Major Science and Technology Project(2024AH040229)+3 种基金Talent Research Initiation Fund Project of Tongling University(2024tlxyrc019)Tongling University School-Level Scientific Research Project(2024tlxyptZD07)TheUniversity Synergy Innovation Programof Anhui Province(GXXT-2023-050)Tongling City Science and Technology Major Special Project(Unveiling and Commanding Model)(200401JB004).
文摘In the image fusion field,fusing infrared images(IRIs)and visible images(VIs)excelled is a key area.The differences between IRIs and VIs make it challenging to fuse both types into a high-quality image.Accordingly,efficiently combining the advantages of both images while overcoming their shortcomings is necessary.To handle this challenge,we developed an end-to-end IRI andVI fusionmethod based on frequency decomposition and enhancement.By applying concepts from frequency domain analysis,we used the layering mechanism to better capture the salient thermal targets from the IRIs and the rich textural information from the VIs,respectively,significantly boosting the image fusion quality and effectiveness.In addition,the backbone network combined Restormer Blocks and Dense Blocks;Restormer blocks utilize global attention to extract shallow features.Meanwhile,Dense Blocks ensure the integration between shallow and deep features,thereby avoiding the loss of shallow attributes.Extensive experiments on TNO and MSRS datasets demonstrated that the suggested method achieved state-of-the-art(SOTA)performance in various metrics:Entropy(EN),Mutual Information(MI),Standard Deviation(SD),The Structural Similarity Index Measure(SSIM),Fusion quality(Qabf),MI of the pixel(FMI_(pixel)),and modified Visual Information Fidelity(VIF_(m)).
基金supported by the Universidad del Rosario(Small grant ID:IV-FPD003)。
文摘Upper Andean tropical forests are renowned for their extraordinary biodiversity and heterogeneous environmental conditions.Despite the critical role of litter decomposition in carbon and nutrient cycles,its dynamics in this region remains unexplored at finer scales.This study investigates how micro site conditions influence litter decomposition of 15 upper Andean species over time.A reciprocal translocation field experiment was conducted over 18 months in 14 permanent plots within four sites in Colombian Andean mountain forests.Each plot contained three litterbeds(microsites),each with the 15 species,harvested at 3,6,12 and 18 months,totaling 2520 litterbags.Different forest variables,including canopy openness,leaf area index,slope and depth of litter,were measured in each litterbed.ANOVAs and linear mixed models were used to assess variation between sites and plots respectively,while multiple linear regression analyses evaluated the effects of forest variables on decay rates over time at the micro site scale.Results showed differences in absolute decay rates between sites but consistent relative decay rates,indicating varying magnitudes of decomposition,yet maintaining the same order based on their litter quality.Decay rates varied between species,with more variation in labile species compared to recalcitrant ones.Despite substantial variation in forest characteristics within sites,their influence on litter decomposition was minimal and declined over time.This suggests that,at finer spatial scales,the forest microenvironment plays a lesser role in litter decomposition,with litter quality emerging as the primary driver.This study is a step towards understanding the fine-scale dynamics of litter decomposition in upper Andean tropical forests,highlighting the intricate interplay between microenvironmental factors and decomposition processes.
基金supported by the National Science and Technology Major Project of China(2025ZD1406703)the Open Fund of Key Laboratory of Oil&Gas Equipment,Ministry of Education(Southwest Petroleum University)(Grant No.OGE20230206).
文摘Shock waves in the nozzle during supersonic separation under different conditions can disrupt the flow field’s thermodynamic equilibrium.While it contributes to the recovery of pressure energy,it also leads to the dissipation of mechanical energy.This study aimed to investigate the effects of changes in back pressure on the shock wave position and its subsequent impact on the refrigeration performance of nozzles.A mathematical model for the supersonic gas in a nozzle was established and evaluated via experiments.The results show that when the back pressure is less than 0.2 MPa,no shock wave is generated in the nozzle,and high refrigeration and liquefaction efficiency can be ensured while effective pressure recovery is achieved.When the back pressure(pb)is increased from 0.3 to 0.6 MPa,the refrigeration efficiency of the nozzle decreases,and the shock wave position(x shock)is advanced from 157 to 118 mm.The maximum Mach number(Ma)that can be reached by the fluid in the nozzle is reduced from 1.97 to 1.27.When the back pressure is increased from 0.2 to 0.6 MPa,the minimum temperature is increased by 55.18 K.When the back pressure is greater than 0.3 MPa,the Mach number upstream of the shock wave is reduced from 1.97 to 1.27,the shock wave intensity is weakened,and the thickness of the boundary layer separation caused by the shock wave is also decreased accordingly.Therefore,to ensure refrigeration efficiency,measures should be taken to control the back pressure within a reasonable range.
基金supported by the National Natural Science Foundation of China(42071238)the Jiuzhaigou Post-Disaster Restoration and Reconstruction Program(5132202020000046)+1 种基金the Second Tibetan Plateau Scientific Expedition and Research Program(STEP)the Ministry of Science and Technology of the People's Republic of China(2019QZKK0402)。
文摘Evaluating the effectivenes s of forest restoration projects is crucial for designing adaptive restoration strategies.However,existing studies have primarily focused on ecological outcomes while overlooking cost inputs.This gap can lead to increased uncertainties in restoration planning.Here we investigated forest dynamics in China's Upper Yangtze River Basin(UYRB)using kernel Normalized Difference Vegetation Index(kNDVI),Leaf Area Index(LAI),Gross Primary Productivity(GPP),Ku-band Vegetation Optical Depth(Ku-VOD)time series and climate data from1982 to 2020.Subsequently,we employed a residual trend analysis integrating temporal effects to determine the relative contributions of climate change and human activities to forest dynamics before and after the implementation of forest restoration engineering in 1998.Additionally,we developed an Afforestation Efficiency Index(AEI)to quantitatively assess the cost efficiency of afforestation projects.Results indicated that forest in the UYRB showed sustained increases during 1982-2020,with most areas experiencing greater growth after 1998 than before.Temporal effects of climatic factors influenced over 42.7%of the forest,and incorporating time-lag and cumulative effects enhanced climate-based explanations of forest variations by 1.61-24.73%.Human activities emerged as the dominant driver of forest dynamics post 1998,whereas climate variables predominated before this period.The cost-effectiveness of forest restoration projects in the UYRB typically ranges from moderate to high,with higher success predominantly observed in the northeastern and eastern counties,while the central,western,and northwestern counties mainly showed relatively low efficiency.These findings stress the need for assessing forest restoration outcomes from both ecological and cost perspectives,and can offer valuable insights for optimizing the layout of forest restoration initiatives in the UYRB.
文摘Theauthor proposes a dual layer source grid load storage collaborative planning model based on Benders decomposition to optimize the low-carbon and economic performance of the distribution network.The model plans the configuration of photovoltaic(3.8 MW),wind power(2.5 MW),energy storage(2.2 MWh),and SVC(1.2 Mvar)through interaction between upper and lower layers,and modifies lines 2–3,8–9,etc.to improve transmission capacity and voltage stability.The author uses normal distribution and Monte Carlo method to model load uncertainty,and combines Weibull distribution to describe wind speed characteristics.Compared to the traditional three-layer model(TLM),Benders decomposition-based two-layer model(BLBD)has a 58.1%reduction in convergence time(5.36 vs.12.78 h),a 51.1%reduction in iteration times(23 vs.47 times),a 8.07%reduction in total cost(12.436 vs.13.528 million yuan),and a 9.62%reduction in carbon emissions(12,456 vs.13,782 t).After optimization,the peak valley difference decreased from4.1 to 2.9MW,the renewable energy consumption rate reached 93.4%,and the energy storage efficiency was 87.6%.Themodel has been validated in the IEEE 33 node system,demonstrating its superiority in terms of economy,low-carbon,and reliability.
文摘The goal of the present work is to demonstrate the potential of Artificial Neural Network(ANN)-driven Genetic Algorithm(GA)methods for energy efficiency and economic performance optimization of energy efficiency measures in a multi-family house building in Greece.The energy efficiency measures include different heating/cooling systems(such as low-temperature and high-temperature heat pumps,natural gas boilers,split units),building envelope components for floor,walls,roof and windows of variable heat transfer coefficients,the installation of solar thermal collectors and PVs.The calculations of the building loads and investment and operating and maintenance costs of the measures are based on the methodology defined in Directive 2010/31/EU,while economic assumptions are based on EN 15459-1 standard.Typically,multi-objective optimization of energy efficiency measures often requires the simulation of very large numbers of cases involving numerous possible combinations,resulting in intense computational load.The results of the study indicate that ANN-driven GA methods can be used as an alternative,valuable tool for reliably predicting the optimal measures which minimize primary energy consumption and life cycle cost of the building with greatly reduced computational requirements.Through GA methods,the computational time needed for obtaining the optimal solutions is reduced by 96.4%-96.8%.
基金Financial support from the National Natural Science Foundation of China(22375024,21975031,21734009,51933001,22109080,and 52173174)the Natural Science Foundation of Shandong Province(No.ZR2022YQ45)+2 种基金the Taishan Scholars Program(Nos.tstp20221121 and tsqnz20221134)The Beijing Natural Science Foundation(No.2244073)supported by State Key Laboratory of Bio-Fibers and Eco-Textiles(Qingdao University)(RZ2200002821)is acknowledged.
文摘A nonfused ring electron acceptor(NFREA),designated as TT-Ph-C6,has been synthesized with the aim of enhancing the power conversion efficiency(PCE)of organic solar cells(OSCs).By integrating asymmetric phenylalkylamino side groups,TT-Ph-C6 demonstrates excellent solubility and its crystal structure exhibits compact packing structures with a three-dimensional molecular stacking network.These structural attributes markedly promote exciton diffusion and charge carrier mobility,particularly advantageous for the fabrication of thick-film devices.TT-Ph-C6-based devices have attained a PCE of 18.01%at a film thickness of 100 nm,and even at a film thickness of 300 nm,the PCE remains at 14.64%,surpassing that of devices based on 2BTh-2F.These remarkable properties position TT-Ph-C6 as a highly promising NFREA material for boosting the efficiency of OSCs.
基金support from the Heilongjiang Province"Double First Class"Discipline Collaborative Innovation Project(No.LJGXCG2023-061).
文摘Hard carbon is a vital anode material for sodium-ion batteries;however,the nonuniform growth of solid electrolyte interphase(SEI)film substantially diminishes its initial coulombic efficiency(ICE)and cycle life.The chemical and morphological properties of surface highly influence the electrode/electrolyte interfacial reactions.In this study,we have tuned orbital hybridization states forming an interface enriched with sp^(2) hybridized carbon(sp^(2)-C),which decreases the binding energy to solvent molecules and inhibits excessive solvent decomposition during SEI formation.Benefiting from successfully constructed inorganic-rich SEI,the ICE increased to 91%and sodium storage capacity reached 346 mAh/g.Besides,the capacity retention rate was 90.7%after 700 cycles at 1 A/g higher than pristine electrode(83.8%).
基金supported by the National Key R&D Program of China (No. 2021YFB3700700)the Henan Province Top Talent Training Program Project, China (No. 244500510020)the High-level Talent Research Start-up Project Funding of Henan Academy of Sciences, China (No. 242017001)。
文摘The microstructural evolution of Cu−19Ni−6Cr−7Mn alloy during aging treatment was investigated.After aging for 120 min at 500℃,the alloy exhibited excellent mechanical properties,including a tensile strength of 978 MPa and an elastic modulus of 145.8 GPa.After aging for 240 min at 500℃,the elastic modulus of the alloy reached 149.5 GPa,which was among the highest values reported for Cu alloys.It was worth mentioning that the tensile strength increased rapidly from 740 to 934 MPa after aging for 5 min at 500℃,which was close to the maximum tensile strength(978 MPa).Analysis of the underlying strengthening mechanisms and phase transformation behavior revealed that the Cu−19Ni−6Cr−7Mn alloy underwent spinodal decomposition and DO_(22) ordering during the first 5 min of aging at 500℃,and L1_(2) ordered phases and bcc-Cr precipitates appeared.Therefore,the enhanced mechanical properties of the Cu−19Ni−6Cr−7Mn alloy can be attributed to the stress field generated by spinodal decomposition and the presence of nanoscale ordered phase and Cr precipitates.
文摘A series of blue and blue‑green Ir(Ⅲ)complexes has been investigated theoretically to explore their electronic structures,photophysical properties,efficiency roll‑off effect,and thermal activation delayed fluorescence(TADF)properties.All calculations were performed using density functional theory(DFT)and time‑dependent density functional theory(TDDFT).Calculations for electronic structures,frontier molecular orbital characteristics(which determine the efficiency roll‑off effect of the complexes),and photophysical properties were conducted using the Gaussian 09 software package.The calculation of spin‑orbit coupling matrix elements<T|HSOC|S>,which determine the TADF properties of the complexes,was performed using the ORCA software package.The calculation results show that the auxiliary ligand tetraphenylimidodiphosphinate(tpip),a strong electron‑withdrawing group,can mitigate the efficiency roll‑off effect of the complex.Furthermore,TADF is observed in one of the designed complexes,(F_(3)Phppy)_(2)Ir(tpip),where F_(3)Phppy=2‑[4‑(2,4,6‑trifluorophenyl)phenyl]pyridine.
基金supported by the Hubei Provincial Science and Technology Project,China(2025CSA039)the National Natural Science Foundation of China(32001467)。
文摘Coordinating light and nitrogen(N)distribution within a canopy is essential for improving rice yield and resource use efficiency.However,limited research has examined light and N distribution in response to planting density and N rate,and their relationships with grain yield,radiation use efficiency(RUE),and N use efficiency for grain production(NUEg)in rice.A two-year field experiment was conducted with two hybrid varieties under three N levels,0 kg ha^(-1)(N1),90 kg ha^(-1)(N2)and 180 kg ha^(-1)(N3),and two planting densities,22.2 hills m-2(D1)and 33.3 hills m^(-2)(D2).Results showed 3.4%higher yield and 4.4%higher NUEg under N2D2 compared with N3D1.The extinction coefficient for N(K_(N))and light(K_(L))and their ratio(K_(N)/K_(L))at heading stage were significantly influenced by N rate,planting density,and their interaction.K_(N)decreased with the increase of N input or planting density.Compared to N1,K_(N)decreased by 43.5 and 58.8%under N2 and N3,respectively,while K_(N)under D2 decreased by 16.0%compared to D1.Higher K_(L)and K_(N)/K_(L)values occurred under low N rates,with opposite trends under high N rates.Increased planting density led to decreased K_(L)and K_(N)/K_(L)values.N2D2 demonstrated higher K_(L)and K_(N),and thus comparable K_(N)/K_(L),compared to N3D1.Correlation analysis revealed K_(L)negatively correlated with RUE,while K_(N)and K_(N)/K_(L)positively correlated with NUEg.These findings indicate that increasing planting density under reduced N input could maintain rice yield while enhancing resource use efficiency through regulation of canopy light and N distribution.
基金funded by the National Natural Science Foundation of China,grant number U24A20135Inner Mongolia Natural Science Foundation major project,grant number 2023ZD12+7 种基金Inner Mongolia Autonomous Region key research and development and achievement transformation plan project,grant number 2023YFHH0090Natural Science Foundation of Inner Mongolia,grant number 2022MS05006Inner Mongolia Autonomous Region Talent Development FundUniversity basic research business expenses,grant number 2023RCTD012University basic research business expenses,grant number 2023QNJS075Postgraduate Research Innovation Program and of Inner Mongolia Autonomous Region,grant number KC2024053BUniversity basic research business expenses,grant number 2024YXXS012National Key Laboratory of Special Vehicle Design and Manufacturing Integration Technology,grant number GZ2023KF012.
文摘In dry-coupled ultrasonic thickness measurement,thick rubber layers introduce high-amplitude parasitic echoes that obscure defect signals and degrade thickness accuracy.Existing methods struggle to resolve overlap-ping echoes under variable coupling conditions and non-stationary noise.This study proposes a novel dual-criterion framework integrating energy contribution and statistical impulsivity metrics to isolate specimen re-flections from coupling-layer interference.By decomposing A-scan signals into Intrinsic Mode Functions(IMFs),the framework employs energy contribution thresholds(>85%)and kurtosis indices(>3)to autonomously select IMFs containing valid specimen echoes.Hybrid time-frequency thresholding further suppresses interference through amplitude filtering and spectral focusing.Experimental results demonstrate the framework’s robustness,achieving 92.3%thickness accuracy for 5 mm steel specimens with 5 mm rubber coupling,outperforming conventional methods by up to 18.7%.The dual-criterion approach reduces operator dependency by 37%and maintainsΔT<0.03 mm under surface roughness up to 6.3μm,offering a practical solution for industrial nondestructive testing with thick dry-coupled interfaces.
基金Under the auspices of National Natural Science Foundation of China(No.42571300)。
文摘Transforming urban spatial structures to promote green and low-carbon development is an effective strategy.Although prior studies have examined the impact of urban polycentricity on carbon emissions and economic development,research on its role in the synergistic relationship between these factors regarding carbon emission efficiency is limited.Furthermore,existing literature often overlooks nonlinear effects and interactions with other urban variables.This paper analyzed data from 295 Chinese cities in 2020,calculating urban population polycentricity,population dispersion indices,and carbon emission efficiency.Utilizing local spatial autocorrelation tools,we reveal interactions among urban population polycentricity,dispersion,carbon emissions,and carbon emission efficiency.We then employ a gradient boosting decision tree model(GBDT)to explore nonlinear and synergistic effects of polycentric urbanization.Key findings include:1)polycentric urbanization in Chinese cities exhibits significant spatial differentiation characteristics.The Polycentricity index is relatively high in economically developed eastern coastal regions with an overall low level,carbon emissions are concentrated in industrialized north-central cities and some Yangtze River Delta hubs,and carbon emission efficiency is the highest in the Yangtze River Delta while relatively low in Northeast China;there are significant spatially heterogeneous interaction characteristics among population polycentricity,population dispersion,carbon emissions,and carbon emission efficiency.2)Urban population polycentricity contributes 9.42%to total carbon emissions and 6.24%to carbon emission efficiency.3)The polycentricity index has a nonlinear impact on carbon emissions and carbon emission efficiency:no significant effect when below 0.50 or above 0.55,increased carbon emissions in 0.50-0.53,and reduced carbon emissions with improved efficiency in 0.53-0.55.4)The polycentricity index has an interaction effect with other variables;specifically,when the polycentricity index is between 0.53 and 0.55,its interaction with urban gross domestic product(GDP),urban population,urban built-up area,green coverage rate in built-up areas,urban technological expenditure,and the proportion of the output value of the secondary industry will reduce carbon emissions and improve carbon emission efficiency.These findings enhance the understanding of urban spatial structures and carbon emissions,providing valuable insights for policymakers in developing green and low-carbon strategies.
基金supported by the National Natural Science Foundation of China under Grant 62171233the Natural Science Foundation of China,Jiangsu Province under Grant BK20241891the Jiangsu Province Graduate Research and Practice Innovation Plan under Grants SJCX24_0313 and KYCX24_1169。
文摘A high-sensitivity,low-noise single photon avalanche diode(SPAD)detector was presented based on a 180 nm BCD process.The proposed device utilizes a p-implant layer/high-voltage n-well(HVNW)junction to form a deep avalanche multiplication region for near-infrared(NIR)sensitivity enhancement.By optimizing the device size and electric field of the guard ring,the fill factor(FF)is significantly improved,further increasing photon detection efficiency(PDE).To solve the dark noise caused by the increasing active diameter,a field polysilicon gate structure connected to the p+anode was investigated,effectively suppressing dark count noise by 76.6%.It is experimentally shown that when the active diameter increases from 5 to 10μm,the FF is significantly improved from 20.7%to 39.1%,and thus the peak PDE also rises from 13.3%to 25.8%.At an excess bias voltage of 5 V,a NIR photon detection probability(PDP)of 6.8%at 905 nm,a dark count rate(DCR)of 2.12 cps/μm^(2),an afterpulsing probability(AP)of 1.2%,and a timing jitter of 216 ps are achieved,demonstrating excellent single photon detection performance.
基金supported by the Jilin Science and Technology Development Program,China (20240602032RC)the Jilin Agricultural Science and Technology Innovation Project,China (CXGC2024ZD001)+1 种基金the Jilin Agricultural Science and Technology Innovation Project,China (CXGC2024ZY012)the Jilin Province Development and Reform Commission-Project for Improving the Independent Innovation Capacity of Major Grain Crops,China (2024C002)。
文摘Emerging and powerful genome editing tools,particularly CRISPR/Cas9,are facilitating functional genomics research and accelerating crop improvement(Jiang et al.2021;Cao et al.2023;Chen C et al.2023;Liu et al.2023a).However,the detection and screening of transgenic lines remain major bottlenecks,being time-consuming,labor-intensive,and inefficient during transformation and subsequent mutation identification.A simple and efficient visual marker system plays a critical role in addressing these challenges.Recent studies demonstrated that the GmW1 and RUBY reporter systems were used to obtain visual transgenic soybean(Glycine max) plants(Chen L et al.2023;Chen et al.2024).
基金Project supported by the National Natural Science Foundation of China(51864033,51274123,21761020)the National Key Basic Research Program of China(973 Program,2012CBA01204)Jiangxi Provincial Scientific&Technological Support Project of China(20132BBE500041)
文摘Nanoporous Gd2O3 powders(NGPs) with different specific surface areas were prepared by a nonaqueous sol-gel method and utilized to tune the exothermal decomposition of ammonium perchlorate(AP) for enhanced propellant efficiency and improved safety.It is found that with the increasing dosage of NGPs into AP,the two exothermal peaks of AP merge into one intense exothermal peak,indicating that an "energy stacking" has been achieved.Meanwhile,the unique delay of the first exothermal peak of AP is conducive to the safety of AP in application process.Furthermore,the dependence of decomposition heat of AP on dosage and calcination temperature is more evident than on the surface areas of NGPs,suggesting that the promotion effect of NGPs on the thermal decomposition of AP does not only rely on the surface interaction.Therefore,an electron transfer mechanism is proposed to illustrate the decomposition process of AP tuned by NGPs.
基金supported by the National Natural Science Foundation of China (Grant No.71463057)the Young Innovative Talent Training Project of Xinjiang Uygur Autonomous Region (Grant No. 2013731005)+1 种基金the Natural Science Foundation of Xinjiang Uygur Autonomous Region (Grant No. 2012211B02)the Humanities and Social Science Project of Ministry of Education of China (Grant No. 11YJC790148)
文摘In order to find the dominant factor of energy efficiency change, this paper uses the modified structural model to analyze energy efficiency change from 1990 to 2012 in Xinjiang. The result shows that the energy efficiency increase is largely due to energy technological innovation especially by the industrial sector, and the contribution from structural shift is limited. Therefore, we should vigorously support energy-saving technological progress in the industrial sector and develop the modern service industries with lower energy consumption, in order to realize the goal of improving energy efficiency.
