Volatile organic compounds(VOCs) emitted from three types of carpets used in aircrafts were compared by using headspace and dynamic chamber tests. The headspace samples contained many compounds that were not detected ...Volatile organic compounds(VOCs) emitted from three types of carpets used in aircrafts were compared by using headspace and dynamic chamber tests. The headspace samples contained many compounds that were not detected in the dynamic chamber test; in addition, the dominant VOCs found by these two methods were different. The findings indicate that for highly sorptive materials such as carpets, headspace analysis may give inaccurate indication of actual VOC emissions, and it is necessary to conduct dynamic chamber tests over a certain period of time in order to identify the true emission characteristics. From the dynamic chamber tests, 2-ethyl-1-hexanol was the main VOC emitted from all three carpets. The study also examined the emission characteristics of aircraft carpets. In all experiments, total VOC(TVOC) concentration peaked within a few hours after the start of the experiment and was followed by rapid decay. The emission parameters of TVOC emitted by all three carpets were calculated and the simulated data matched the measured data well.展开更多
[Objectives] This study was conducted to establish a method for microbial limit test of Compound Yu E Nose Drops.[Methods] According to the Chinese Pharmacopoei (General Rules in the fourth part of the 2015 edition),t...[Objectives] This study was conducted to establish a method for microbial limit test of Compound Yu E Nose Drops.[Methods] According to the Chinese Pharmacopoei (General Rules in the fourth part of the 2015 edition),the microbial limit test method for Compound Yu E Nose Drops was verified.[Results] Compound Yu E Nose Drops has a strong inhibitory effect on Staphylococcus aureus and Bacillus subtilis,and the inhibitory activity was significantly eliminated after increasing the diluent (1∶ 20).The recoveries were all in the range of 0.5-2.0 when the total quantities of aerobic microbes were determined by the dilution method (1∶ 20).When the total quantities of mould and yeast were determined by the conventional method,the recoveries were both in the range of 0.5-2.0.When examining control bacteria,Escherichia coli,S.aureus and Pseudomonas aeruginosa can all be detected in the test groups by the test liquid dilution method.[Conclusions] For Compound Yu E Nose Drops,the total quantities of aerobic microbe can be counted by the dilution method;the quantities of mould and yeast can be examined by the conventional plate method;and the conventional method can be used for control microbe examination.展开更多
Based on SIMA, the Al-Si alloy semi-solid billets were successfully fabricated by means of strain inducement and isothermal treatment for AlSi9Mg poured in the range of near-liquidus. Through orthogonal test, the effe...Based on SIMA, the Al-Si alloy semi-solid billets were successfully fabricated by means of strain inducement and isothermal treatment for AlSi9Mg poured in the range of near-liquidus. Through orthogonal test, the effects of combination action of near-liquidus casting, strain inducement and isothermal treatment on the morphology of primaryα-Al phase of AlSi9Mg close to eutectic point were investigated, and the optimal match relation between the processing parameters of solidification, deformation parameters of strain inducement, processing parameters of isothermal treatment and microstructure parameters of semi-solid alloy was established. The results indicate that compared with the single near-liquidus casting or SIMA, the microstructure of primaryα-Al phase in AlSi9Mg alloy prepared by compound fabrication process is more homogeneous, with more globular and finer particles, which has average grain size of 40-50 urn and shape factor of greater than 0.75. After holding at 605℃for 30-40 min under a certain cooling rate, increased deformation volume in SIMA benefits the refinement of the grain and the improvement of the morphology for primary phase.展开更多
The P ＋ Sr ＋ Ce compound modification technologies of as-cast Al-21Si-1.5Cu-1.5Ni- 2.5Fe- 0.5Mg alloy were investigated by means of orthogonal test. Orthogonal test results show that 3% （CaH2PO4 ＋ 2CASO4）＋ 0.2%...The P ＋ Sr ＋ Ce compound modification technologies of as-cast Al-21Si-1.5Cu-1.5Ni- 2.5Fe- 0.5Mg alloy were investigated by means of orthogonal test. Orthogonal test results show that 3% （CaH2PO4 ＋ 2CASO4）＋ 0.2%Sr ＋ 0.2%Ce is the optimum additive of modification treatment which can fine eutectic and primary silicon also can change the form of rich-iron phase at same time. The needle form of rich-iron phase is Al9FeSi3, which is prored by X-ray diffraction analysis and X-ray energy spectrum analysis. After compound modification treatment, the needle form of rich-iron phase disappeared and the fish bone form of rich-iron and rich-Ce phase that is AlsCeFe emerged. Both at room temperature and at 300℃, the tensile strength of the alloy after the modification treatment with the optimum additive is 30% lager than that of the alloy unmodified. Observed by SEM, the brittle intercrystalline tensile fracture changed into a blended one in which has many dimples.展开更多
The objective of this research was to show a way to conduct rejuvenation of aged polymer modified asphalt binder（PMB） successfully.To fully evaluate and understand the rejuvenation of aged PMB,the Penetration grade ...The objective of this research was to show a way to conduct rejuvenation of aged polymer modified asphalt binder（PMB） successfully.To fully evaluate and understand the rejuvenation of aged PMB,the Penetration grade tests including penetration,soften point,ductility and elastic recovery and SuperpaveTM PG grade tests including DSR,BBR and DDT were conducted.The rejuvenation effect of aged PMB by utilizing a fluid recycling agent in common use for binder rejuvenation was evaluated.And then the compound rejuvenation effect of aged PMB by utilizing the recycling agent with a new modifying additive for binder modification was evaluated.The experimental results indicated that the recycling agent in common use currently does not apply to polymer modified asphalt binder rejuvenation.But the recycling agent together with the modifying additive can restore the characteristics of aged polymer modified binder very well.Therefore,compound rejuvenation of polymer modified asphalt binder is recommended.展开更多
[Objectives] To determine the optimal preparation process of compound Ban Huang oral liquid. [Methods] Orthogonal test and other methods were used to optimize the preparation conditions of compound Ban Huang oral liqu...[Objectives] To determine the optimal preparation process of compound Ban Huang oral liquid. [Methods] Orthogonal test and other methods were used to optimize the preparation conditions of compound Ban Huang oral liquid. [Results] The optimal conditions determined were as follows: soaking for 12 h,decocting twice with 2 h per time,concentrating filtrate to 1. 18-1. 25 g/m L at 80 ℃,ethanol precipitating twice with ethanol contents of 600 and 750 ml/L,standing for 24 h. [Conclusions] The optimized preparation process is simple,feasible and stable,and can be used for preparing compound Ban Huang oral liquid.展开更多
Objective In this study, a pilot-scale investigation was conducted to examine and compare the biotoxicity of the organic compounds in effluents from five treatment processes (P1-P5) where each process was combination ...Objective In this study, a pilot-scale investigation was conducted to examine and compare the biotoxicity of the organic compounds in effluents from five treatment processes (P1-P5) where each process was combination of preoxidation (O3), coagulation, sedimentation, sand filtration, ozonation, granular activated carbon, biological activated carbon and chlorination (NaClO). Methods Organic compounds were extracted by XAD-2 resins and eluted with acetone and dichlormethane (DCM). The eluents were evaporated and redissolved with DMSO or DCM. The mutagenicity and estrogenicity of the extracts were assayed with the Ames test and yeast estrogen screen (YES assay), respectively. The organic compounds were detected by GC-MS. Results The results indicated that the mutation ratio (MR) of organic compounds in source water was higher than that for treated water. GC-MS showed that more than 48 organic compounds were identified in all samples and that treated water had significantly fewer types and concentrations of organic compounds than source water. Conclusion To different extents, all water treatment processes could reduce both the mutagenicity and estrogenicity, relative to source water. P2, P3, and P5 reduced mutagenicity more effectively, while P1 reduced estrogenicity, most effectively. Water treatment processes in this pilot plant had weak abilities to remove Di-n-butyl phthalate or 1, 2-Benzene dicarboxylic acid.展开更多
基金Funded by the National Basic Research Program of China(973 Program) under Grant No.2012CB720100
文摘Volatile organic compounds(VOCs) emitted from three types of carpets used in aircrafts were compared by using headspace and dynamic chamber tests. The headspace samples contained many compounds that were not detected in the dynamic chamber test; in addition, the dominant VOCs found by these two methods were different. The findings indicate that for highly sorptive materials such as carpets, headspace analysis may give inaccurate indication of actual VOC emissions, and it is necessary to conduct dynamic chamber tests over a certain period of time in order to identify the true emission characteristics. From the dynamic chamber tests, 2-ethyl-1-hexanol was the main VOC emitted from all three carpets. The study also examined the emission characteristics of aircraft carpets. In all experiments, total VOC(TVOC) concentration peaked within a few hours after the start of the experiment and was followed by rapid decay. The emission parameters of TVOC emitted by all three carpets were calculated and the simulated data matched the measured data well.
基金Supported by Traditional Chinese Medicine Modern Technology Industry Research and Development Special Project of Guizhou Province(QKHZYZ[2013]5018)First-class Construction Discipline Project of Guizhou Province(GNYL[2017]008)+1 种基金Traditional Chinese Medicine Characteristic Technology Inheriting Talent Project of State Administration of Traditional Chinese Medicine(GZYYRJH[2019]43)Traditional Chinese Medicine and Ethnic Minority Medicine Technique Research Subject of Guizhou Administrative Bureau of TCM(QZYY2013-75)
文摘[Objectives] This study was conducted to establish a method for microbial limit test of Compound Yu E Nose Drops.[Methods] According to the Chinese Pharmacopoei (General Rules in the fourth part of the 2015 edition),the microbial limit test method for Compound Yu E Nose Drops was verified.[Results] Compound Yu E Nose Drops has a strong inhibitory effect on Staphylococcus aureus and Bacillus subtilis,and the inhibitory activity was significantly eliminated after increasing the diluent (1∶ 20).The recoveries were all in the range of 0.5-2.0 when the total quantities of aerobic microbes were determined by the dilution method (1∶ 20).When the total quantities of mould and yeast were determined by the conventional method,the recoveries were both in the range of 0.5-2.0.When examining control bacteria,Escherichia coli,S.aureus and Pseudomonas aeruginosa can all be detected in the test groups by the test liquid dilution method.[Conclusions] For Compound Yu E Nose Drops,the total quantities of aerobic microbe can be counted by the dilution method;the quantities of mould and yeast can be examined by the conventional plate method;and the conventional method can be used for control microbe examination.
基金Project(04044058) supported by the Excellent Youths Science and Technology Foundation of Anhui, China
文摘Based on SIMA, the Al-Si alloy semi-solid billets were successfully fabricated by means of strain inducement and isothermal treatment for AlSi9Mg poured in the range of near-liquidus. Through orthogonal test, the effects of combination action of near-liquidus casting, strain inducement and isothermal treatment on the morphology of primaryα-Al phase of AlSi9Mg close to eutectic point were investigated, and the optimal match relation between the processing parameters of solidification, deformation parameters of strain inducement, processing parameters of isothermal treatment and microstructure parameters of semi-solid alloy was established. The results indicate that compared with the single near-liquidus casting or SIMA, the microstructure of primaryα-Al phase in AlSi9Mg alloy prepared by compound fabrication process is more homogeneous, with more globular and finer particles, which has average grain size of 40-50 urn and shape factor of greater than 0.75. After holding at 605℃for 30-40 min under a certain cooling rate, increased deformation volume in SIMA benefits the refinement of the grain and the improvement of the morphology for primary phase.
文摘The P ＋ Sr ＋ Ce compound modification technologies of as-cast Al-21Si-1.5Cu-1.5Ni- 2.5Fe- 0.5Mg alloy were investigated by means of orthogonal test. Orthogonal test results show that 3% （CaH2PO4 ＋ 2CASO4）＋ 0.2%Sr ＋ 0.2%Ce is the optimum additive of modification treatment which can fine eutectic and primary silicon also can change the form of rich-iron phase at same time. The needle form of rich-iron phase is Al9FeSi3, which is prored by X-ray diffraction analysis and X-ray energy spectrum analysis. After compound modification treatment, the needle form of rich-iron phase disappeared and the fish bone form of rich-iron and rich-Ce phase that is AlsCeFe emerged. Both at room temperature and at 300℃, the tensile strength of the alloy after the modification treatment with the optimum additive is 30% lager than that of the alloy unmodified. Observed by SEM, the brittle intercrystalline tensile fracture changed into a blended one in which has many dimples.
基金Funded in Part by the National Natural Science Foundation of China (No. 50878054)
文摘The objective of this research was to show a way to conduct rejuvenation of aged polymer modified asphalt binder（PMB） successfully.To fully evaluate and understand the rejuvenation of aged PMB,the Penetration grade tests including penetration,soften point,ductility and elastic recovery and SuperpaveTM PG grade tests including DSR,BBR and DDT were conducted.The rejuvenation effect of aged PMB by utilizing a fluid recycling agent in common use for binder rejuvenation was evaluated.And then the compound rejuvenation effect of aged PMB by utilizing the recycling agent with a new modifying additive for binder modification was evaluated.The experimental results indicated that the recycling agent in common use currently does not apply to polymer modified asphalt binder rejuvenation.But the recycling agent together with the modifying additive can restore the characteristics of aged polymer modified binder very well.Therefore,compound rejuvenation of polymer modified asphalt binder is recommended.
基金Supported by Earmarked Fund for China Agriculture Research System(CARS-38)Special Fund for Agro-scientific Research in the Public Interest of China(301303038-4)
文摘[Objectives] To determine the optimal preparation process of compound Ban Huang oral liquid. [Methods] Orthogonal test and other methods were used to optimize the preparation conditions of compound Ban Huang oral liquid. [Results] The optimal conditions determined were as follows: soaking for 12 h,decocting twice with 2 h per time,concentrating filtrate to 1. 18-1. 25 g/m L at 80 ℃,ethanol precipitating twice with ethanol contents of 600 and 750 ml/L,standing for 24 h. [Conclusions] The optimized preparation process is simple,feasible and stable,and can be used for preparing compound Ban Huang oral liquid.
文摘Objective In this study, a pilot-scale investigation was conducted to examine and compare the biotoxicity of the organic compounds in effluents from five treatment processes (P1-P5) where each process was combination of preoxidation (O3), coagulation, sedimentation, sand filtration, ozonation, granular activated carbon, biological activated carbon and chlorination (NaClO). Methods Organic compounds were extracted by XAD-2 resins and eluted with acetone and dichlormethane (DCM). The eluents were evaporated and redissolved with DMSO or DCM. The mutagenicity and estrogenicity of the extracts were assayed with the Ames test and yeast estrogen screen (YES assay), respectively. The organic compounds were detected by GC-MS. Results The results indicated that the mutation ratio (MR) of organic compounds in source water was higher than that for treated water. GC-MS showed that more than 48 organic compounds were identified in all samples and that treated water had significantly fewer types and concentrations of organic compounds than source water. Conclusion To different extents, all water treatment processes could reduce both the mutagenicity and estrogenicity, relative to source water. P2, P3, and P5 reduced mutagenicity more effectively, while P1 reduced estrogenicity, most effectively. Water treatment processes in this pilot plant had weak abilities to remove Di-n-butyl phthalate or 1, 2-Benzene dicarboxylic acid.
