Research on chip-scale atomic clocks （CSACs） based on coherent population trapping （CPT） is reviewed. The back- ground and the inspiration for the research are described, including the important schemes proposed t...Research on chip-scale atomic clocks （CSACs） based on coherent population trapping （CPT） is reviewed. The back- ground and the inspiration for the research are described, including the important schemes proposed to improve the CPT signal quality, the selection of atoms and buffer gases, and the development of micro-cell fabrication. With regard to the re- liability, stability, and service life of the CSACs, the research regarding the sensitivity of the CPT resonance to temperature and laser power changes is also reviewed, as well as the CPT resonance＇s collision and light of frequency shifts. The first generation CSACs have already been developed but its characters are still far from our expectations. Our conclusion is that miniaturization and power reduction are the most important aspects calling for further research.展开更多
The physics package of a chip-scale atomic clock （CSAC） has been successfully realized by integrating vertical cavity surface emitting laser （VCSEL）, neutral density （ND） filter, λ/4 wave plate, 87Rb vapor cell...The physics package of a chip-scale atomic clock （CSAC） has been successfully realized by integrating vertical cavity surface emitting laser （VCSEL）, neutral density （ND） filter, λ/4 wave plate, 87Rb vapor cell, photodiode （PD）, and magnetic coil into a cuboid metal package with a volume of about 2.8 cm3. In this physics package, the critical component, 87Rb vapor cell, is batch-fabricated based on MEMS technology and in-situ chemical reaction method. Pt heater and thermistors are integrated in the physics package. A PTFE pillar is used to support the optical elements in the physics package, in order to reduce the power dissipation. The optical absorption spectrum of 87Rb D1 line and the microwave frequency correction signal are successfully observed while connecting the package with the servo circuit system. Using the above mentioned packaging solution, a CSAC with short-term frequency stability of about 7 × 10^-10τ-1/2 has been successfully achieved, which demonstrates that this physics package would become one promising solution for the CSAC.展开更多
We describe the microfabrication of ^85Rb vapour cells using a glass-silicon anodic bonding technique and in situ chemical reaction between rubidium chloride and barium azide to produce Rb. Under controlled conditions...We describe the microfabrication of ^85Rb vapour cells using a glass-silicon anodic bonding technique and in situ chemical reaction between rubidium chloride and barium azide to produce Rb. Under controlled conditions, the pure metallic Rb drops and buffer gases were obtained in the cells with a few mm^3 internal volumes during the cell sealing process. At an ambient temperature of 90 ℃ the optical absorption resonance of ^85Rb D1 transition with proper broadening and the corresponding coherent population trapping （CPT） resonance, with a signal contrast of 1.5% and linewidth of about 1.7 kHz, have been detected. The sealing quality and the stability of the cells have also been demonstrated experimentally by using the helium leaking detection and the after-9-month optoelectronics measurement which shows a similar CPT signal as its original status. In addition, the physics package of chip-scale atomic clock （CSAC） based on the cell was realized. The measured frequency stability of the physics package can reach to 2.1 × 10^-10 at one second when the cell was heated to 100 ℃ which proved that the cell has the quality to be used in portable and battery-operated devices.展开更多
A real time multiprocessor chip paradigm is also called a Network-on-Chip (NoC) which offers a promising architecture for future systems-on-chips. Even though a lot of Double Tail Sense Amplifiers (DTSA) are used in a...A real time multiprocessor chip paradigm is also called a Network-on-Chip (NoC) which offers a promising architecture for future systems-on-chips. Even though a lot of Double Tail Sense Amplifiers (DTSA) are used in architectural approach, the conventional DTSA with transceiver exhibits a difficulty of consuming more energy and latency than its intended design during heavy traffic condition. Variable Energy aware sense amplifier Link for Asynchronous NoC (VELAN) is designed in this research to eliminate the difficulty, which is the combination of Variable DTSA circuitry (V-DTSA) and Transceiver. The V-DTSA circuitry has following components such as bootable DTSA (B-DTSA) and bootable clock gating DTSA (BCG-DTSA), Graph theory based Traffic Estimator (GTE) and controller. Depending upon the traffic rate, the controller activates necessary DTSA modules and transfers information to the receiver. The proposed VELAN design is evaluated on TSMC 90 nm technology, showing 6.157 Gb/s data rate, 0.27 w total link power and 354 ps latency for single stage operation.展开更多
设计了一种用于时钟芯片的Pierce晶体振荡器,通过对传统结构的改进,增加了振幅控制结构和输出频率校准电路,提高了输出频率、振幅的稳定性和输出频率的精度,降低了功耗。同时对电路的工作原理进行了理论分析,电路采用CSMC 0.5μm-5 V C...设计了一种用于时钟芯片的Pierce晶体振荡器,通过对传统结构的改进,增加了振幅控制结构和输出频率校准电路,提高了输出频率、振幅的稳定性和输出频率的精度,降低了功耗。同时对电路的工作原理进行了理论分析,电路采用CSMC 0.5μm-5 V CMOS工艺实现,通过仿真结果验证,显示该设计达到了技术指标要求。展开更多
基金Project support by the National Natural Science Foundation of China(Grant No.11074012)
文摘Research on chip-scale atomic clocks （CSACs） based on coherent population trapping （CPT） is reviewed. The back- ground and the inspiration for the research are described, including the important schemes proposed to improve the CPT signal quality, the selection of atoms and buffer gases, and the development of micro-cell fabrication. With regard to the re- liability, stability, and service life of the CSACs, the research regarding the sensitivity of the CPT resonance to temperature and laser power changes is also reviewed, as well as the CPT resonance＇s collision and light of frequency shifts. The first generation CSACs have already been developed but its characters are still far from our expectations. Our conclusion is that miniaturization and power reduction are the most important aspects calling for further research.
基金supported by the Knowledge Innovation Project of Chinese Academy of Sciences(Grant No.KGCX2-YW-143)
文摘The physics package of a chip-scale atomic clock （CSAC） has been successfully realized by integrating vertical cavity surface emitting laser （VCSEL）, neutral density （ND） filter, λ/4 wave plate, 87Rb vapor cell, photodiode （PD）, and magnetic coil into a cuboid metal package with a volume of about 2.8 cm3. In this physics package, the critical component, 87Rb vapor cell, is batch-fabricated based on MEMS technology and in-situ chemical reaction method. Pt heater and thermistors are integrated in the physics package. A PTFE pillar is used to support the optical elements in the physics package, in order to reduce the power dissipation. The optical absorption spectrum of 87Rb D1 line and the microwave frequency correction signal are successfully observed while connecting the package with the servo circuit system. Using the above mentioned packaging solution, a CSAC with short-term frequency stability of about 7 × 10^-10τ-1/2 has been successfully achieved, which demonstrates that this physics package would become one promising solution for the CSAC.
基金Project supported by National 863/973 Plans Projects (Grant Nos. 2006AA04Z361,2006CB932402)NSFC (Grant No. 60971002)
文摘We describe the microfabrication of ^85Rb vapour cells using a glass-silicon anodic bonding technique and in situ chemical reaction between rubidium chloride and barium azide to produce Rb. Under controlled conditions, the pure metallic Rb drops and buffer gases were obtained in the cells with a few mm^3 internal volumes during the cell sealing process. At an ambient temperature of 90 ℃ the optical absorption resonance of ^85Rb D1 transition with proper broadening and the corresponding coherent population trapping （CPT） resonance, with a signal contrast of 1.5% and linewidth of about 1.7 kHz, have been detected. The sealing quality and the stability of the cells have also been demonstrated experimentally by using the helium leaking detection and the after-9-month optoelectronics measurement which shows a similar CPT signal as its original status. In addition, the physics package of chip-scale atomic clock （CSAC） based on the cell was realized. The measured frequency stability of the physics package can reach to 2.1 × 10^-10 at one second when the cell was heated to 100 ℃ which proved that the cell has the quality to be used in portable and battery-operated devices.
文摘A real time multiprocessor chip paradigm is also called a Network-on-Chip (NoC) which offers a promising architecture for future systems-on-chips. Even though a lot of Double Tail Sense Amplifiers (DTSA) are used in architectural approach, the conventional DTSA with transceiver exhibits a difficulty of consuming more energy and latency than its intended design during heavy traffic condition. Variable Energy aware sense amplifier Link for Asynchronous NoC (VELAN) is designed in this research to eliminate the difficulty, which is the combination of Variable DTSA circuitry (V-DTSA) and Transceiver. The V-DTSA circuitry has following components such as bootable DTSA (B-DTSA) and bootable clock gating DTSA (BCG-DTSA), Graph theory based Traffic Estimator (GTE) and controller. Depending upon the traffic rate, the controller activates necessary DTSA modules and transfers information to the receiver. The proposed VELAN design is evaluated on TSMC 90 nm technology, showing 6.157 Gb/s data rate, 0.27 w total link power and 354 ps latency for single stage operation.
文摘设计了一种用于时钟芯片的Pierce晶体振荡器,通过对传统结构的改进,增加了振幅控制结构和输出频率校准电路,提高了输出频率、振幅的稳定性和输出频率的精度,降低了功耗。同时对电路的工作原理进行了理论分析,电路采用CSMC 0.5μm-5 V CMOS工艺实现,通过仿真结果验证,显示该设计达到了技术指标要求。
