Two carborane-containing resol phenolic resins（P1 and P2） with high boron content were synthesized via the reaction of carborane bisphenols（1 and 2） with formaldehyde in the presence of alkaline. HRMS results indi...Two carborane-containing resol phenolic resins（P1 and P2） with high boron content were synthesized via the reaction of carborane bisphenols（1 and 2） with formaldehyde in the presence of alkaline. HRMS results indicate that P1 is mainly composed of hydroxymethylated o-carborane bisphenols, the Mw of which was restrained around 500 due to the strong steric hindrance of o-carborane bisphenol. In contrast, the molecular weight of P2 was well regulated under various reaction conditions. The obtained resins were characterized with spectroscopic techniques including FTIR, 1H-NMR, ^13C-NMR, and 11B-NMR, which gave satisfactory results. TGA studies show that P2 shows char yield of 88.9% and 92.9% at 900 ℃ under nitrogen and air respectively. The imported carborane cage endows phenolic resin with ultrahigh char yield. Particularly, the char yield of the obtained carborane-containing phenolic resin under air is higher than that under nitrogen. FTIR and XRD confirm that the carborane cage could react with oxygen to form B2O3 at elevated temperatures, which postpones the thermal decomposition of phenolic resin and accounts for the high char yield.展开更多
The curing behavior of diglycidyl ether of bisphenol-A(DGEBA) with aromatic diamide-diimide-diamines having aryl ether,sulfone and methylene linkages was studied by differential scanning calorimetry(DSC).Nine diamide-...The curing behavior of diglycidyl ether of bisphenol-A(DGEBA) with aromatic diamide-diimide-diamines having aryl ether,sulfone and methylene linkages was studied by differential scanning calorimetry(DSC).Nine diamide-diimide-diamines of varying structure were synthesized by reacting 1 mole of dianhydride with 2 moles of L-cysteine(S) in a mixture of acetic acid and pyridine(3:2 V/V) followed by activation with thionyl chloride(SOCl_2) and then condensation with excess of diamines.Structural characterization...展开更多
以o-(3)和m-碳硼烷双酚(4)为原料,经两步法合成了o-(1)和m-碳硼烷双酚二缩水甘油醚(2),FTIR、1H-NMR、GPC和环氧值测试都表明得到了预期结构的碳硼烷环氧树脂.固化反应动力学研究结果显示,1/DDS和2/DDS体系的反应活化能(Ea)分别为79.0和...以o-(3)和m-碳硼烷双酚(4)为原料,经两步法合成了o-(1)和m-碳硼烷双酚二缩水甘油醚(2),FTIR、1H-NMR、GPC和环氧值测试都表明得到了预期结构的碳硼烷环氧树脂.固化反应动力学研究结果显示,1/DDS和2/DDS体系的反应活化能(Ea)分别为79.0和67.1 k J·mol-1,比E-51/DDS略高,说明碳硼烷结构的存在降低了环氧树脂的反应活性.以Ea结果为依据,确定了1(2)/DDS体系的固化工艺为180℃/2h+200℃/2h.热分析结果表明,以DDS为固化剂时,1和2的Tg分别为175.8和167.6℃,高于TDE-85的154.1℃.TGA结果表明,2/DDS固化物在空气气氛下700℃的残炭率高达78.7%,说明碳硼烷结构的存在极大提高了环氧树脂高温稳定性.碳硼烷环氧树脂空气气氛中的高温残炭率比氮气中高,原因是碳硼烷结构中的B-H键与空气中的氧气反应生成B—O—B结构,因而提高了残炭率,并在一定程度上延缓了体系的失重.展开更多
基金financially supported by the Fundamental Research Funds for the Central Universities(No.JD-1512)
文摘Two carborane-containing resol phenolic resins（P1 and P2） with high boron content were synthesized via the reaction of carborane bisphenols（1 and 2） with formaldehyde in the presence of alkaline. HRMS results indicate that P1 is mainly composed of hydroxymethylated o-carborane bisphenols, the Mw of which was restrained around 500 due to the strong steric hindrance of o-carborane bisphenol. In contrast, the molecular weight of P2 was well regulated under various reaction conditions. The obtained resins were characterized with spectroscopic techniques including FTIR, 1H-NMR, ^13C-NMR, and 11B-NMR, which gave satisfactory results. TGA studies show that P2 shows char yield of 88.9% and 92.9% at 900 ℃ under nitrogen and air respectively. The imported carborane cage endows phenolic resin with ultrahigh char yield. Particularly, the char yield of the obtained carborane-containing phenolic resin under air is higher than that under nitrogen. FTIR and XRD confirm that the carborane cage could react with oxygen to form B2O3 at elevated temperatures, which postpones the thermal decomposition of phenolic resin and accounts for the high char yield.
文摘The curing behavior of diglycidyl ether of bisphenol-A(DGEBA) with aromatic diamide-diimide-diamines having aryl ether,sulfone and methylene linkages was studied by differential scanning calorimetry(DSC).Nine diamide-diimide-diamines of varying structure were synthesized by reacting 1 mole of dianhydride with 2 moles of L-cysteine(S) in a mixture of acetic acid and pyridine(3:2 V/V) followed by activation with thionyl chloride(SOCl_2) and then condensation with excess of diamines.Structural characterization...
文摘以o-(3)和m-碳硼烷双酚(4)为原料,经两步法合成了o-(1)和m-碳硼烷双酚二缩水甘油醚(2),FTIR、1H-NMR、GPC和环氧值测试都表明得到了预期结构的碳硼烷环氧树脂.固化反应动力学研究结果显示,1/DDS和2/DDS体系的反应活化能(Ea)分别为79.0和67.1 k J·mol-1,比E-51/DDS略高,说明碳硼烷结构的存在降低了环氧树脂的反应活性.以Ea结果为依据,确定了1(2)/DDS体系的固化工艺为180℃/2h+200℃/2h.热分析结果表明,以DDS为固化剂时,1和2的Tg分别为175.8和167.6℃,高于TDE-85的154.1℃.TGA结果表明,2/DDS固化物在空气气氛下700℃的残炭率高达78.7%,说明碳硼烷结构的存在极大提高了环氧树脂高温稳定性.碳硼烷环氧树脂空气气氛中的高温残炭率比氮气中高,原因是碳硼烷结构中的B-H键与空气中的氧气反应生成B—O—B结构,因而提高了残炭率,并在一定程度上延缓了体系的失重.
