期刊文献+
共找到136篇文章
< 1 2 7 >
每页显示 20 50 100
Er^(3+) activated BaLaGaO_(4) multifunctional green phosphors for optical thermometers and WLEDs
1
作者 Xingyang Peng Ruirui Cui +3 位作者 Xiang Guo Xingyong Gong Jun Zhang Chaoyong Deng 《Journal of Rare Earths》 2025年第10期2077-2089,I0002,共14页
Er^(3+)-doped BaLaGaO_(4)green phosphors was synthesized through a high-temperature solid-state reaction technique.The phase structure and morphology test results of the phosphor indicate that the BaLaGaO_(4)material ... Er^(3+)-doped BaLaGaO_(4)green phosphors was synthesized through a high-temperature solid-state reaction technique.The phase structure and morphology test results of the phosphor indicate that the BaLaGaO_(4)material was successfully synthesized and Er^(3+)ions were successfully doped into the main lattice.This doping does change the basic structure of the crystal.BaLaGaO_(4):Er^(3+)phosphor exhibits bright green emission centered at 545 nm when excited by 381 nm ultraviolet light or 980 nm near-infrared light.The optimal doping concentration is found to be x=0.04.To quantify the temperature sensitivity of the phosphor,the fluorescence intensity ratio method was used.Within the temperature range of 298-473 K,the maximum relative sensitivities are 1.35%/K(298 K,381 nm)and 1.45%/K(298 K,980 nm),respectively.The maximum absolute sensitivities are 0.67%/K(473 K,381 nm)and 0.69%/K(473 K,980 nm),respectively.Finally,white light-emitting diodes(WLEDs)with a high colour index of Ra=82and a relatively low correlated colour temperature of CCT=5064 K are obtained by integrating the synthesized BaLaGaO_(4):0.04Er^(3+)green phosphor into warm WLEDs devices.These results suggest that Er^(3+)-activated BaLaGaO_(4)multifunctional phosphors hold considerable promise in the areas of optical temperature sensing and WLEDs phosphor conversion. 展开更多
关键词 PHOSPHOR Down/upconversion Opticaltemperature sensor wledS Rare earths
原文传递
Garnet-type cyan-green-emitting SrLu_(2)Ga_(1.5)Al_(2.5)SiO_(12):Ce^(3+) phosphor with high quantum efficiency,thermal stability,and water resistance for blue-excited WLEDs
2
作者 Jing Yan Junyu Hong +4 位作者 Xiaohui Li Bojana Milićević Lei Zhou Chunyan Jiang Mingmei Wu 《Journal of Rare Earths》 2025年第10期2100-2107,I0002,共9页
Nowadays,high-quality phosphor-converted white light-emitting diodes(pc-WLEDs)ought to include cyan-emitting phosphors allowing for full-spectrum light similar to sunlight.Herein,we report a garnetstructured Ce^(3+)-d... Nowadays,high-quality phosphor-converted white light-emitting diodes(pc-WLEDs)ought to include cyan-emitting phosphors allowing for full-spectrum light similar to sunlight.Herein,we report a garnetstructured Ce^(3+)-doped SrLu_(2)Ga_(1.5)Al_(2.5)SiO_(12)(SLGASO)phosphor that significantly compensates for the absence of cyan light,known as the"cyan cavity".The SLGASO host crystallizes into a cubic structure with the Ia3d space group.The cell parameters were determined using Rietveld refinement.Under430 nm blue excitation,SLGASO:Ce^(3+)emits intense cyan-green light in the 450-700 nm wavelength range.The representative SLGASO:0.07Ce^(3+)phosphor has an internal quantum efficiency(IQE)of 95.4%and excellent thermal stability,remaining 92.7%of its initial emission intensity at 152℃.After 155 d of immersion in water,the luminous intensity of SLGASO:0.07Ce^(3+)remains constant,confirming its waterproofness.Furthermore,a pc-WLED device with luminous efficiency(LE)of 101.58 lm/W,color rendering index(Ra)of 91,correlated color temperature(CCT)of 4536 K,and Commission Internationale de L'Eclairage(CIE)chromaticity coordinates of(0.3555,0.3390)was fabricated by combining asprepared cyan-green-emitting SLGASO:0.07Ce^(3+),yellow-emitting Y_(3)Al_(5)O_(12):Ce^(3+)(YAG:Ce^(3+)),and redemitting(Ca,Sr)AlSiN_(3):Eu^(2+)phosphors,as well as a 450 nm blue chip.These findings indicate that SLGASO:0.07Ce^(3+)phosphor can bridge the cyan gap and improve the performance of as-fabricated fullvisible-spectrum WLEDs. 展开更多
关键词 Cyan-green phosphor Photoluminescence Thermal stability Water resistance White light-emitting diodes(wleds) Rare earths
原文传递
AgInS_(2)量子点调控及其在WLED应用上的研究进展 被引量:1
3
作者 刘汉语 谢志翔 +5 位作者 陈婷 董延茂 周兴 袁妍 吴海涛 陈勇号 《功能材料》 CAS CSCD 北大核心 2024年第2期2041-2051,2104,共12页
AgInS_(2)量子点是一种有趣的材料,其近红外带隙范围从1.87到1.98 eV,作为直接带隙半导体,它能通过调节Ag/In比例来调节带隙,它还具有较宽的PL峰和较大的Stokes位移,同时低毒环保的特性也使它成为有望替代含Cd、Hg和Pb等重金属元素的二... AgInS_(2)量子点是一种有趣的材料,其近红外带隙范围从1.87到1.98 eV,作为直接带隙半导体,它能通过调节Ag/In比例来调节带隙,它还具有较宽的PL峰和较大的Stokes位移,同时低毒环保的特性也使它成为有望替代含Cd、Hg和Pb等重金属元素的二元量子点的理想材料,在光电器件领域尤其在发光二极管中有着广泛的应用前景。本文详细阐述了AgInS_(2)量子点晶体结构和发光机制,总结了其合成方法的特点并综述了通过壳体工程和掺杂的方法对AgInS_(2)量子点进行调控的策略,最后介绍了该类量子点在发光二极管方面的应用进展。 展开更多
关键词 AgInS_(2) 量子点 合成 优化 wled
在线阅读 下载PDF
蓝光LD激发pc-WLED的发光性能
4
作者 杨一涵 黄俐皓 +3 位作者 王鼎成 李阳 王轩宇 隋国荣 《光学仪器》 2024年第4期64-73,共10页
为了提升白光LED的光源亮度,同时降低LED效率骤降的影响,采用了蓝光LD激发pc-WLED的技术方案。研究了荧光陶瓷片与反射基板的关系,并分析了不同掺杂的荧光陶瓷片的性能。对荧光陶瓷片进行封装后,进行了性能比较。最后,将不同掺杂的荧光... 为了提升白光LED的光源亮度,同时降低LED效率骤降的影响,采用了蓝光LD激发pc-WLED的技术方案。研究了荧光陶瓷片与反射基板的关系,并分析了不同掺杂的荧光陶瓷片的性能。对荧光陶瓷片进行封装后,进行了性能比较。最后,将不同掺杂的荧光陶瓷片装配到RC激光模组中进行了对比实验。从结果可知,GaN基蓝光LED芯片是非常理想的反射基板,最适用于照明的荧光陶瓷为4xAl_(2)O_(3)+(Ce_(0.01)Y_(0.93)Gd_(0.06))_(3)Al_(5)O_(12),因为其氧化铝含量高,热导率好,且该荧光陶瓷不仅可以进一步提升白光LED的光源亮度,而且可以减小LED效率骤降的影响。 展开更多
关键词 蓝光LD pc-wled 荧光陶瓷片 LED
在线阅读 下载PDF
CsPbX_(3)(X=Br,I)@ZIF-8复合材料用于高效WLED器件
5
作者 纪宇昂 杜超男 +1 位作者 施惟恒 林东海 《上海第二工业大学学报》 2024年第3期240-246,共7页
纯无机铯铅卤钙钛矿材料由于其高光致发光量子产率(PLQY)、高色纯度、可调带隙、高载流子迁移率在光电子器件中引起了广泛的关注。然而,水、氧条件下稳定性较差使其实际用途受到限制,为了提升水氧环境下的稳定性,在典型热注射法合成步... 纯无机铯铅卤钙钛矿材料由于其高光致发光量子产率(PLQY)、高色纯度、可调带隙、高载流子迁移率在光电子器件中引起了广泛的关注。然而,水、氧条件下稳定性较差使其实际用途受到限制,为了提升水氧环境下的稳定性,在典型热注射法合成步骤中加入干燥的纳米粒子自组装方法合成的ZIF-8粉末使钙钛矿纳米晶体在ZIF-8孔隙中原位生长得到CsPbX_(3)@ZIF-8(X=Br,I)复合材料,该合成方法步骤简单,成本低廉,合成样品具有优异的稳定性,在空气中可以稳定2年以上,水中15 d后依然观察到明亮的荧光发射。以PMMA为基体材料制备的CsPbX_(3)@ZIF-8/PMMA(X=Br,I)复合膜具有良好的光学特性,分别制成绿光CsPbBr3@ZIF-8/PMMA膜发射峰波长为525 nm与红光CsPbI3@ZIF-8/PMMA膜发射峰波长为697 nm。以蓝光LED为光源制备成的WLED器件达到白光色度坐标为(0.3112,0.3334),色温6552 K,显色指数(CRI)为73.6。 展开更多
关键词 纯无机铯铅卤钙钛矿 ZIF-8 热注射法 稳定性 原位生长 wled
在线阅读 下载PDF
新型WLED荧光粉Ca_2MgSi_2O_7:Ce^(3+),Eu^(2+)的能量传递和光色研究 被引量:1
6
作者 丘志海 林林 +4 位作者 龚慧 陈海滨 吴彬 冯颖 郑志强 《中国稀土学报》 CAS CSCD 北大核心 2011年第5期544-548,共5页
用高温固相法制备了Ca2MgSi2O7:Ce3+,Eu2+,并研究其发光特性。Ce3+的发射带峰值位于410 nm,对应于Ce3+的5d→4f跃迁;Eu2+的发射带峰值位于530 nm,对应于Eu2+的5d→4f跃迁。双掺样品的发射光谱表明两种离子间存在高效的电偶极-电偶极能... 用高温固相法制备了Ca2MgSi2O7:Ce3+,Eu2+,并研究其发光特性。Ce3+的发射带峰值位于410 nm,对应于Ce3+的5d→4f跃迁;Eu2+的发射带峰值位于530 nm,对应于Eu2+的5d→4f跃迁。双掺样品的发射光谱表明两种离子间存在高效的电偶极-电偶极能量传递。当Ce3+和Eu2+浓度分别为2%和0.125%时,样品发射光谱(λex=360 nm)色坐标为(0.221,0.312),落在白光区。以上研究说明Ca2MgSi2O7:Ce3+,Eu2+是一种适用于近紫外芯片的新型WLED荧光粉,其光色可调谐。 展开更多
关键词 wled 荧光粉 硅酸盐 能量传递 稀土
原文传递
WLED照明应急控制电路的设计
7
作者 杨婷 景占荣 高田 《电源技术应用》 2010年第1期28-32,共5页
本文设计了一种宽范围输入的白光LED(WLED)恒流控制电路,内置锂电池应急照明模块,并具有对电池自动充电、应急自启动以及恒流供电等功能,实验证明控制电路所需各项性能指标均较好地实现。
关键词 wled光源 稳压 恒流 应急照明
在线阅读 下载PDF
YAG∶Ce Phosphors for WLED via Nano-Pesudoboehmite Sol-Gel Route 被引量:15
8
作者 张纳 王达健 +3 位作者 李岚 蒙延双 张晓松 明楠 《Journal of Rare Earths》 SCIE EI CAS CSCD 2006年第3期294-297,共4页
The sub-micron sized YAG : Ce phosphors were synthesized via a modified sol-gel method by peptizing nano-pesudoboehmite particulate. It is found that YAG phase from the dried gel powders appears at 1000 ℃ then the p... The sub-micron sized YAG : Ce phosphors were synthesized via a modified sol-gel method by peptizing nano-pesudoboehmite particulate. It is found that YAG phase from the dried gel powders appears at 1000 ℃ then the pure YAG phase exists at a relatively lower sintering temperature of 1400 ℃. The smaller sizes of phosphors in the ranges of 1 - 3 μm are obtained due to the contribution of seeding effects of nano-sized alumina particles to strengthen each step of the processes. Both the excitation and emission spectra of photoluminescence of the phosphor obtained at 1400 ℃ meet well with the spectroscopic requirements of the WLED phosphors. 展开更多
关键词 PSEUDO-BOEHMITE sol-gel YAG Ce phosphor wled rare earths
在线阅读 下载PDF
Luminescence properties of a single-host phosphor Ba_(1.8-w)Sr_wLi_(0.4)SiO_4:Ce^(3+),Eu^(2+),Mn^(2+) for WLED 被引量:6
9
作者 黄山 韦先涛 +1 位作者 陈永虎 尹民 《Journal of Rare Earths》 SCIE EI CAS CSCD 2013年第3期227-230,共4页
In order to obtain a single-host-white-light phosphor, a series of Bal.8 -x-y-zSrwLi0.4xCexEuyMnzSi04 (BSLS:Ce3+,Eu2+, Mn2+) powder samples were synthesized via high temperature solid-state reaction. The structu... In order to obtain a single-host-white-light phosphor, a series of Bal.8 -x-y-zSrwLi0.4xCexEuyMnzSi04 (BSLS:Ce3+,Eu2+, Mn2+) powder samples were synthesized via high temperature solid-state reaction. The structure and photoluminescence properties were investigated. Under ultraviolet excitation, the emission spectra contained three bands: the 370-470 nm blue band, the 470-570 nm green band and the 570-700 nm red band, which arose from the 5d---4f transitions of Ce3+ and Eu2+, and the 4TI---6A1 transition of Mn2+, respectively. The excitation spectra of the emissions of Ce3+ and Mn2+ ions showed the energy transfer from Ce3+ to Mn2+. White light emission was obtained from the tri-doped samples of appropriate doping concentration under 31 0-360 nm excitation. 展开更多
关键词 photoluminescence barium strontium lithium silicate energy transfer single-host-white-light phosphor wled rare earths
原文传递
Luminescence of halophosphate solid-solution Ca5(PO4)3(F0.8Cl0.2):Eu^2+,Mn^2+ for WLED 被引量:4
10
作者 Jiashan Mao Hongwei Fang Yonghu Chen 《Journal of Rare Earths》 SCIE EI CAS CSCD 2018年第11期1157-1161,共5页
Solid-solution based luminescent materials have been widely explored due to their tunable optical properties in recent years. In this work, instead of more common cation-substitution approach, we investigated the lumi... Solid-solution based luminescent materials have been widely explored due to their tunable optical properties in recent years. In this work, instead of more common cation-substitution approach, we investigated the luminescence properties of Eu^2+ and Mn^2 + co-doped halophosphate solid solution Ca5(PO4)3(F0.8Cl0.2) via anion substitution synthesized by high temperature solid state reaction method. The formation of the solid solution was confirmed by X-ray diffraction (XRD) characterization, which indicates that the introduction of certain proportion of CI will not make significant change on the CaB(PO4)3F lattice, We also studied the energy transfer from Eu^2+ to Mn^2+ in the host so as to obtain white light emission via adjusting the doping concentrations of Eu^2+ and Mn^2+, The white light emission was achieved through combination of Eu^2+ blue emission and Mn^2+ red-orange emission with appropriate proportions. The results suggest that Ca5(PO4)3(F0.8Cl0.2):0.01Eu^2++,0.18Mn^2+ could be a potential WLED phosphor working under ultraviolet excitation, 展开更多
关键词 wled Rare earth Transition metal LUMINESCENCE Energy transfer
原文传递
Hydrothermal synthesis of uniform CdWO4:Eu^3+microrods as single component for UV-based WLEDs 被引量:3
11
作者 雷芳 殷录桥 +3 位作者 施鹰 谢建军 章蕾 范灵聪 《Journal of Rare Earths》 SCIE EI CAS CSCD 2016年第12期1179-1187,共9页
A series of single-composition emission-tunable CdWO4:Eu^3+ uniform size nanorods were synthesized by polyvinylpyrrolidone(PVP) assisted hydrothermal process. The products were measured by powder X-ray diffraction... A series of single-composition emission-tunable CdWO4:Eu^3+ uniform size nanorods were synthesized by polyvinylpyrrolidone(PVP) assisted hydrothermal process. The products were measured by powder X-ray diffraction(PXRD), scanning electron microscopy(SEM), transmission electron microscopy(TEM), photoluminescence, and fluorescent decay test. The results showed that reaction time, temperature, p H values and Eu^3+ doped concentration played important roles in determining the morphologies and photoluminescent properties. And we also investigated its use in Ga N LED, warm-white-light could be obtained by the combination of the bright blue light originated from the charge transfer transition in the tungstate groups and the near UV light from LED chip with the red emission from 4f-4f transition of Eu^3+, respectively. By properly tuning the doping concentration of Eu^3+, chromaticity coordinates(0.30 0.22) could be achieved under the 380 nm excitation and its color rendering index was 80.6. So it has potential application in warm-WLED and replacing the commercial YAG:Ce phosphor which absence of red band emission. 展开更多
关键词 CdWO4:Eu3+ hydrothermal synthesis wled photoluminescence single-component rare earths
原文传递
A novel Eu^(3+)-doped phosphor-in-glass for WLEDs and the effect of borophosphate matrix 被引量:4
12
作者 Teng Ma Haohong Chen +5 位作者 Luqiao Yin Fang Lei Ying Shi Jianjun Xie Lei Zhang Lingcong Fan 《Journal of Rare Earths》 SCIE EI CAS CSCD 2023年第2期190-199,共10页
Phosphor-in-glass(PiG)is a potential color convertor for high power WLEDs.A novel glass matrix with advanced performance is still a challenge.Recently,Eu^(3+)doped glass matrix has attracted much consideration mainly ... Phosphor-in-glass(PiG)is a potential color convertor for high power WLEDs.A novel glass matrix with advanced performance is still a challenge.Recently,Eu^(3+)doped glass matrix has attracted much consideration mainly due to its red compensation.A new borophosphate matrix to realize Eu^(3+)red light was designed in the Na_(2)O-ZnO-P_(2)O_(5)-B_(2)O_(3)-Eu_(2)O_(3)system.Meanwhile,a series of PiGs composed of different concentrations of Y3Al5O12:Ce phosphor and the matrix were also fabricated by re-sintering.The crystallization of Eu^(3+)based phosphate offers a novel red emission quenching apart from normal concentration quenching in the glass system.No direct energy transfer but only little reabso rption occurs between Eu^(3+)and Ce^(3+)ions.The Ce^(3+)concentration effect is obvious on the electroluminescent color.The optimized color rendering index of 79.7,the CIE coordinates near natural white and the range of CCT from 3943 to 6097 K were obtained for the packaged white light emitting diodes(WLEDs)together with the excellent CCT stability higher than about 97.5%and the quadruple thermal conductivity than that of silicon resin.The work implies borophosphate glass based PiGs with fine transparence and energy conversion efficiency are promising for excellent WLEDs,while the LED by using the PiG sample without any yellow phosphor doped is of high color purity and has a potential use as the 465 nm blue source. 展开更多
关键词 Phosphor-in-glass Eu^(3+)ion Borophosphate glass wleds YAG:Ce Rare earths
原文传递
WLED驱动器芯片升压控制电路设计
13
作者 刘振 邵志标 《微电子学与计算机》 CSCD 北大核心 2014年第7期42-46,51,共6页
设计了一种用于白光LED(WLED)驱动器且具有PWM调光和模拟调光两种工作模式的升压控制电路.电路中,大电容补偿网络的引入和低电压提取电路的设计有效地提高了电路调光性能.利用0.5μm-BCD工艺库仿真,结果表明:PWM调光下,控制电路在零负... 设计了一种用于白光LED(WLED)驱动器且具有PWM调光和模拟调光两种工作模式的升压控制电路.电路中,大电容补偿网络的引入和低电压提取电路的设计有效地提高了电路调光性能.利用0.5μm-BCD工艺库仿真,结果表明:PWM调光下,控制电路在零负载与额定负载之间快速切换,切换时间小于12μs;模拟调光下,输出与调光电压实现自适应,支路电流为20mA时,WLED阵列为6×6、6×8、6×10,输出分别稳定在20.4V、27.0V和33.3V.该设计改善了WLED驱动器的调光比,进而提升LCD显示质量. 展开更多
关键词 wled 升压控制 补偿网络 低电压提取 自适应
在线阅读 下载PDF
Design of luminescence in(Sr,Gd)Li(Al,Mg)_(3)N_(4):Eu^(2+)deep red phosphors via crystal field engineering for full-spectrum WLEDs 被引量:1
14
作者 Qing Lin Tongyu Gao +4 位作者 Yuanhong Liu Ronghui Liu Siwei Chen Xiaole Ma Chunlei Zhao 《Journal of Rare Earths》 SCIE EI CAS CSCD 2023年第8期1127-1134,I0001,共9页
Red phosphor,with longer wavelength,is highly desirable for full-spectrum WLEDs.Targeted deep red phosphors(Sr,Gd)Li(AI,Mg)_(3)N_(4):Eu^(2+)were designed from the initial model of SrLiAl_(3)N_(4):Eu^(2+)by structural ... Red phosphor,with longer wavelength,is highly desirable for full-spectrum WLEDs.Targeted deep red phosphors(Sr,Gd)Li(AI,Mg)_(3)N_(4):Eu^(2+)were designed from the initial model of SrLiAl_(3)N_(4):Eu^(2+)by structural modification.The correlations among structural evolution,crystal-field environment,and luminescence properties were elucidated.Replacing Sr^(2+)with Gd^(3+)in(Sr,Gd)LiAl_(3)N_(4):Eu^(2+)leads to the enhanced crystal field splitting,larger Stokes shift,and increased structural polyhedron distortion differences,consequently resulting in spectral red-shift and broadening.For further spectral tuning,Mg,with lower electronegativity,was also introduced to modify the local crystal structure,consequently resulting in a further red-shift towards 675 nm and enhanced photoluminescence intensity in(Sr,Gd)Li(AI,Mg)_(3)N_(4):Eu^(2+).What’s more,w-LEDs were fabricated by using blue LED chip,blue,green,red and deep red((Sr,Gd)Li(Al,Mg)_(3)N_(4):Eu^(2+))phosphors whose color rendering index were Ra 96.0 and R997.7.All above results demonstrate that the partial replacements of Sr^(2+)by Gd^(3+)and Al^(3+)by Mg^(2+)are effective methods for spectral modulation and(Sr,Gd)Li(AI,Mg)_(3)N_(4):Eu^(2+)phosphors are suitable for highquality full-spectrum WLEDs. 展开更多
关键词 Full-spectrum wleds Structural modulation Deep red phosphor Rare earths
原文传递
驱动WLED不必4V
15
作者 Will Hadden 《电子设计工程》 2009年第2期109-110,共2页
白光LED(WLED)能为便携式电子产品的显示器提供背光,最常见的是需要4 V驱动电压的单个WLED,而单节锂电池平均电压为3.6 V,因此在使用单节锂电池驱动WLED的情况下需用升压转换器。探讨WLED的低电流应用与对其正向电压的影响,并介绍TI的新... 白光LED(WLED)能为便携式电子产品的显示器提供背光,最常见的是需要4 V驱动电压的单个WLED,而单节锂电池平均电压为3.6 V,因此在使用单节锂电池驱动WLED的情况下需用升压转换器。探讨WLED的低电流应用与对其正向电压的影响,并介绍TI的新款LED驱动器TPS7510。 展开更多
关键词 wled TPS7510 驱动器
在线阅读 下载PDF
Green Synthesis and Luminescent Properties of Mn4+ Doped Red Phosphor for WLED
16
作者 Xiaoyi Liu Guixia Liu 《Optics and Photonics Journal》 2023年第6期147-155,共9页
Herein, the K<sub>3</sub>MoO<sub>2</sub>F<sub>5</sub><sup>.</sup>2H<sub>2</sub>O:Mn<sup>4+</sup> phosphor was synthesized by using low toxic NH&l... Herein, the K<sub>3</sub>MoO<sub>2</sub>F<sub>5</sub><sup>.</sup>2H<sub>2</sub>O:Mn<sup>4+</sup> phosphor was synthesized by using low toxic NH<sub>4</sub>HF<sub>2</sub> and HCl instead of highly toxic HF. The K3</sub>MoO2</sub>F<sub>5</sub><sup>.</sup><sub></sub>2H2</sub>O:Mn4+</sup> phosphor has a blocky structure and exhibits sharp red emission at the range of 580 to 670 nm excited by the blue light at 470 nm. The fabricated WLED device at 20 mA current has low correlation color temperature (CCT = 3608 K) and high color rendering index (Ra = 90.1), which can significantly improve the electroluminescence performance of cold WLED devices. These results indicate that the K3</sub>MoO2</sub>F5</sub><sup>.</sup>2H2</sub>O:Mn4+</sup> phosphor has potential application value in warm WLED excited by blue light chip. . 展开更多
关键词 Mn4+ Green Synthesis PHOSPHOR wled
在线阅读 下载PDF
荧光碳点的合成、发光机制、固态发光及其在WLEDs中的应用 被引量:1
17
作者 岳劲松 袁方宇 +4 位作者 邱汉迅 李颖 李静 薛裕华 杨俊和 《新型炭材料(中英文)》 SCIE EI CAS CSCD 北大核心 2023年第3期478-495,共18页
荧光碳点(CDs)作为一种尺寸小于10 nm的新型碳质纳米材料,因其优异的荧光调谐性、良好的生物相容性以及来源广泛和成本低廉等优点而受到了广泛的研究。此外,由于CDs制备工艺简单、性能优异,在光学传感、能源、生物医学成像、白光发光二... 荧光碳点(CDs)作为一种尺寸小于10 nm的新型碳质纳米材料,因其优异的荧光调谐性、良好的生物相容性以及来源广泛和成本低廉等优点而受到了广泛的研究。此外,由于CDs制备工艺简单、性能优异,在光学传感、能源、生物医学成像、白光发光二极管(WLEDs)等领域均有广泛的应用。近年来,大量的CDs基固态光致发光材料被开发出来并应用于WLEDs领域。基于目前的研究,本文首先对CDs的合成策略进行了简要综述,随后详细介绍了CDs的光致发光机理和实现固态光致发光的方法,并且对CDs应用于WLEDs领域的最新进展进行了总结。最后,讨论了目前CDs研究面临的问题与挑战。 展开更多
关键词 碳点 光致发光 固态发光 白色发光二极管
在线阅读 下载PDF
室温批量合成高质量无机钙钛矿量子点及其WLED应用 被引量:2
18
作者 沈亚龙 陈鹏 +2 位作者 胡殷茜 崔磊 王跃 《光子学报》 EI CAS CSCD 北大核心 2023年第11期45-52,共8页
为克服在大批量合成无机钙钛矿量子点(CsPbBr_(3))时出现的材料光学性能下降的问题,提出了一种改进的室温溶液工艺,通过加入HBr促进前驱体的分散溶解,同时引入路易斯酸配体部分取代油胺,实现量子点表面的缺陷态有效钝化,合成出高质量的C... 为克服在大批量合成无机钙钛矿量子点(CsPbBr_(3))时出现的材料光学性能下降的问题,提出了一种改进的室温溶液工艺,通过加入HBr促进前驱体的分散溶解,同时引入路易斯酸配体部分取代油胺,实现量子点表面的缺陷态有效钝化,合成出高质量的CsPbBr_(3)量子点材料。实验测试结果表明,合成出的CsPbBr_(3)量子点荧光发射峰位于517 nm处,发射峰半高宽仅有17 nm,荧光量子效率高达95%。利用制备出的绿光CsPbBr_(3)量子点和商用红色荧光粉混合,和以Ga N为基底的蓝光芯片组装成一个白光LED器件,该器件在20 m A的工作电流下获得流明效率达48.35 lm/W的白光。这种高效白光LED展示出无机钙钛矿量子点在通用照明、背光显示和光通信等领域中具有很大的应用潜力。 展开更多
关键词 钙钛矿量子点 室温溶液法 批量合成 白光LED
在线阅读 下载PDF
基于计算机模拟TiO_(2)改性转光膜及pc-WLED研究 被引量:1
19
作者 薛辉 常睿 《传感器与微系统》 CSCD 北大核心 2021年第10期63-66,共4页
基于蒙特-卡洛计算机模拟方法,研究了TiO_(2)粒子不同掺杂浓度对转光膜和pc-WLED性能的调控。研究结果表明:转光膜的荧光发射强度随着TiO_(2)粒子质量分数的提升先升高后降低,在质量分数为2.0%时具有高值;Mie散射理论计算机模拟显示光... 基于蒙特-卡洛计算机模拟方法,研究了TiO_(2)粒子不同掺杂浓度对转光膜和pc-WLED性能的调控。研究结果表明:转光膜的荧光发射强度随着TiO_(2)粒子质量分数的提升先升高后降低,在质量分数为2.0%时具有高值;Mie散射理论计算机模拟显示光子传播自由程随粒子质量分数升高而降低,有利于光子散射系数提高和蓝光激发光子激发。进一步结合蓝光LED芯片实现pc-WLED的模拟,光谱分布曲线中蓝光强度随TiO_(2)粒子质量分数增加而降低,黄光荧光发射强度则表现升高趋势,均得益于粒子散射效应提高了激发光子与荧光粉粒子作用几率;对应器件在质量分数为2.0%时具有最高光通量415.8 lm,相较于未掺杂提高了14.83%。研究表明:基于TiO_(2)粒子散射效应可有效改性转光膜和pc-WLED的光色性能,对于获得高效率、低成本和高均匀度pc-WLED具有参考价值。 展开更多
关键词 荧光转换型白光二极管 转光膜 TiO_(2)粒子 光通量
在线阅读 下载PDF
碳点的合成、发光机理及在WLEDs中的应用 被引量:2
20
作者 王园迟 《广州化工》 CAS 2021年第17期5-8,共4页
荧光碳点是新型碳基纳米材料的一个新兴类别,由于其优异的荧光可调谐性,来源广泛,成本低廉,作为一种“绿色材料”逐渐登上了荧光纳米材料的舞台,受到研究学者们的广泛关注,引发了包括生物医学、化学传感、光电器件在内的许多领域的研究... 荧光碳点是新型碳基纳米材料的一个新兴类别,由于其优异的荧光可调谐性,来源广泛,成本低廉,作为一种“绿色材料”逐渐登上了荧光纳米材料的舞台,受到研究学者们的广泛关注,引发了包括生物医学、化学传感、光电器件在内的许多领域的研究热潮。近年来,大量的新型荧光碳点材料被开发并应用于WLEDs。本文从碳点的合成、荧光机理及WLEDs的应用角度对该领域的最新研究进展进行了综述,重点介绍了该领域最新相关的研究成果。 展开更多
关键词 碳点 荧光机理 白光二极管
在线阅读 下载PDF
上一页 1 2 7 下一页 到第
使用帮助 返回顶部