The perfluorosulfonic acid(PFSA) membrane doped with two-dimensional conductive filler Ti_(3)C_(2)T_(x) is a fuel cell proton exchange membrane with high application potential. Experimental studies showed that the pro...The perfluorosulfonic acid(PFSA) membrane doped with two-dimensional conductive filler Ti_(3)C_(2)T_(x) is a fuel cell proton exchange membrane with high application potential. Experimental studies showed that the proton conductivity of Nafion/Ti_(3)C_(2)T_(x) composite membrane is improved significantly compared with that in pure Nafion. However, the microscopic mechanism of doping on the enhancement of membrane performance is remain unclear now. In this work, molecular dynamics simulation was used to investigate the microscopic morphology and proton transport behaviors of Nafion/Ti_(3)C_(2)T_(x) composite membrane at the molecular level. The results shown that there were significant differences about the diffusion kinetics of water molecules and hydroxium ions in Nafion/Ti_(3)C_(2)T_(x) at low and high hydration levels in the nanoscale region.With the increase of water content, Ti_(3)C_(2)T_(x) in membrane was gradually surrounded by ambient water molecules to form a hydration layer, and forming a relatively continuous proton transport channel between Nafion polymer and Ti_(3)C_(2)T_(x) monomer. The continuous proton transport channel could increase the number of binding sites of proton and thus achieving high proton conductivity and high mobility of water molecules at higher hydration level. The current work can provide a theoretical guidance for designing new type of Nafion composite membranes.展开更多
Hydrophilicity is critical in Nafion membranes during fuel cell operation as insufficient membrane hydration leads to brittle behavior and a drop in proton conductivity.The incorporation of APTS(3-(aminopro pyl)trieth...Hydrophilicity is critical in Nafion membranes during fuel cell operation as insufficient membrane hydration leads to brittle behavior and a drop in proton conductivity.The incorporation of APTS(3-(aminopro pyl)triethoxysilane)into exfoliated graphene oxide(EGO)by covalent functionalization to be used as filler into Nafion membranes allows higher hydrophilicity for these membranes.This is associated with promoting hydroxyl,carbonyl,siloxane,silane,and amine groups within the EGO-APTS matrix.The incorporation of these materials as Fuel Cell MEAs leads to a significant reduction of the ohmic resistance measured at high frequency resistance(HFR)in electrochemical impedance spectroscopy(EIS)experiments and achieves maximum power densities of 1.33 W cm^(-2)at 60℃ at 100%RH(APTS-EGO,0.2 wt%)and1.33 W cm^(-2)at 60℃ at 70%RH(APTS-EGO,0.3 wt%),which represents an improvement of 190%compared to the commercial Nafion 212 when utilizing low humidification conditions(70%).Moreover,the as-synthesized membrane utilizes lower Nafion ionomer mass,which,in conjunction with the excellent cell performance,has the potential to decrease the cost of the membrane from 87 to 80￡/W as well as a reduction of fluorinated compounds within the membrane.展开更多
Al 2O 3-SiO 2-TiO 2-ZrO 2 supported membranes were prepar ed by Sol-Gel method. These composite ceramic membranes are level, even and no macro crack. There exist several crystalline phases such as Al 2O 3, TiO...Al 2O 3-SiO 2-TiO 2-ZrO 2 supported membranes were prepar ed by Sol-Gel method. These composite ceramic membranes are level, even and no macro crack. There exist several crystalline phases such as Al 2O 3, TiO 2(a natase), Al 2SiO 5, and ZrO 2 in these membranes. Changing the molar ratio of Al∶Si∶Ti∶Zr,the kinds and content of crystal phases of composite membranes could be different, which may lead to a variety of microstructure of membranes. The surface nanoscale topography and microstructure of membranes were investiga ted by XRD,SEM,AFM,EPMA. The effects of additives and heat treatments on the sur face nanoscale topography and microstructure of composite ceramic membranes were also analyzed.展开更多
基金financially supported by the National Key R&D Program of China (Nos.2020YFB1505500 and 2020YFB1505503)。
文摘The perfluorosulfonic acid(PFSA) membrane doped with two-dimensional conductive filler Ti_(3)C_(2)T_(x) is a fuel cell proton exchange membrane with high application potential. Experimental studies showed that the proton conductivity of Nafion/Ti_(3)C_(2)T_(x) composite membrane is improved significantly compared with that in pure Nafion. However, the microscopic mechanism of doping on the enhancement of membrane performance is remain unclear now. In this work, molecular dynamics simulation was used to investigate the microscopic morphology and proton transport behaviors of Nafion/Ti_(3)C_(2)T_(x) composite membrane at the molecular level. The results shown that there were significant differences about the diffusion kinetics of water molecules and hydroxium ions in Nafion/Ti_(3)C_(2)T_(x) at low and high hydration levels in the nanoscale region.With the increase of water content, Ti_(3)C_(2)T_(x) in membrane was gradually surrounded by ambient water molecules to form a hydration layer, and forming a relatively continuous proton transport channel between Nafion polymer and Ti_(3)C_(2)T_(x) monomer. The continuous proton transport channel could increase the number of binding sites of proton and thus achieving high proton conductivity and high mobility of water molecules at higher hydration level. The current work can provide a theoretical guidance for designing new type of Nafion composite membranes.
基金financially supported by the UK Research Council EPRSC EP/W03395X/1the Program grant SynHiSel EP/V047078/1the Hydrogen and Fuel Cells Hub(H_(2)FC SUPERGEN)EP/P024807/1。
文摘Hydrophilicity is critical in Nafion membranes during fuel cell operation as insufficient membrane hydration leads to brittle behavior and a drop in proton conductivity.The incorporation of APTS(3-(aminopro pyl)triethoxysilane)into exfoliated graphene oxide(EGO)by covalent functionalization to be used as filler into Nafion membranes allows higher hydrophilicity for these membranes.This is associated with promoting hydroxyl,carbonyl,siloxane,silane,and amine groups within the EGO-APTS matrix.The incorporation of these materials as Fuel Cell MEAs leads to a significant reduction of the ohmic resistance measured at high frequency resistance(HFR)in electrochemical impedance spectroscopy(EIS)experiments and achieves maximum power densities of 1.33 W cm^(-2)at 60℃ at 100%RH(APTS-EGO,0.2 wt%)and1.33 W cm^(-2)at 60℃ at 70%RH(APTS-EGO,0.3 wt%),which represents an improvement of 190%compared to the commercial Nafion 212 when utilizing low humidification conditions(70%).Moreover,the as-synthesized membrane utilizes lower Nafion ionomer mass,which,in conjunction with the excellent cell performance,has the potential to decrease the cost of the membrane from 87 to 80￡/W as well as a reduction of fluorinated compounds within the membrane.
文摘Al 2O 3-SiO 2-TiO 2-ZrO 2 supported membranes were prepar ed by Sol-Gel method. These composite ceramic membranes are level, even and no macro crack. There exist several crystalline phases such as Al 2O 3, TiO 2(a natase), Al 2SiO 5, and ZrO 2 in these membranes. Changing the molar ratio of Al∶Si∶Ti∶Zr,the kinds and content of crystal phases of composite membranes could be different, which may lead to a variety of microstructure of membranes. The surface nanoscale topography and microstructure of membranes were investiga ted by XRD,SEM,AFM,EPMA. The effects of additives and heat treatments on the sur face nanoscale topography and microstructure of composite ceramic membranes were also analyzed.
