Oil cleaning agents generated from nuclear power plants(NPPs)are radioactive organic liquid wastes.To date,because there are no satisfactory industrial treatment measures,these wastes can only be stored for a long tim...Oil cleaning agents generated from nuclear power plants(NPPs)are radioactive organic liquid wastes.To date,because there are no satisfactory industrial treatment measures,these wastes can only be stored for a long time.In this work,the optimization for the supercritical water oxidation(SCWO)of the spent organic solvent was investigated.The main process parameters of DURSET(oil cleaning agent)SCWO,such as temperature,reaction time,and excess oxygen coefficient,were optimized using response surface methodology,and a quadratic polynomial model was obtained.The determination coefficient(R^(2))of the model is 0.9812,indicating that the model is reliable.The optimized process conditions were at 515 C,66 s,and an excess oxygen coefficient of 211%.Under these conditions,the chemical oxygen demand removal of organic matter could reach 99.5%.The temperature was found to be the main factor affecting the SCWO process.Ketones and benzene-based compounds may be the main intermediates in DURSET SCWO.This work provides basic data for the industrialization of the degradation of spent organic solvents from NPP using SCWO technology.展开更多
The emulsion stability of oilfield produced water is related to the oil-water interfacial film strength and the zeta potential of the oil droplets. We investigated the effects of water treatment agents （corrosion inh...The emulsion stability of oilfield produced water is related to the oil-water interfacial film strength and the zeta potential of the oil droplets. We investigated the effects of water treatment agents （corrosion inhibitor SL-2, scale inhibitor HEDP, germicide 1227, and flocculant polyaluminium chloride PAC） on the stability of oilfield produced water. The influence of these treatment agents on oil-water interfacial properties and the mechanism of these agents acting on the oilfield produced water were studied by measuring the interfacial shear viscosity, interfacial tension and zeta electric potential. The results indicated that the scale inhibitor HEDP could increase the oil-water interfacial film strength, and it could also increase the absolute value of the zeta potential of oil droplets. HEDP played an important role in the stability of the emulsion. Polyaluminum chloride （PAC） reduced the stability of the emulsion by considerably decreasing the absolute value of the zeta potential of oil droplets. Corrosion inhibitor SL-2 and germicide 1227 could decrease the oil-water interfacial tension, whereas they had little influence on oil-water interfacial shear viscosity and oil-water interfacial electricity properties.展开更多
The caustic alkali-free water extraction agents were studied for treating the oil sands excavated from Inner Mongolia, China. Several kinds of chemical reagents were evaluated, among which sodium carbonate(SC), sodium...The caustic alkali-free water extraction agents were studied for treating the oil sands excavated from Inner Mongolia, China. Several kinds of chemical reagents were evaluated, among which sodium carbonate(SC), sodium dodecyl benzene sulfonate(SD) and sodium chloride were confirmed as composite solutes. Their proportion was optimized by an orthogonal test. The optimum proportion of the composite agent covered 0.03% of SD, 0.50% of sodium chloride, 3.00% of SC, with the rest composed of water. The optimal operating condition was also confirmed. The oil sands were extracted at the following optimized conditions: a treating time of 15 min, a temperature of 80 ℃ and an extraction agent/feed ratio of 1:1, with the bitumen yield reaching more than 96%. The extraction agent after separation from the bitumen product can be recycled for reuse to carve out a good environmentally friendly route.展开更多
A self-developed ASP agent was used to separate bitumen from Indonesia's oil sands by its comprehensive effect and the separation condition was well investigated. The bitumen extraction conditions for industrial a...A self-developed ASP agent was used to separate bitumen from Indonesia's oil sands by its comprehensive effect and the separation condition was well investigated. The bitumen extraction conditions for industrial application were recommended to cover a mixing temperature of 80℃, a mixing time of 40 min, a mass ratio of ASP agent to oil sands of 4:10, and a floating time of 10 min. Under the above conditions, the bitumen recovery was about 86% and the residual bitumen content in tailings was about 6%. The relationship between the residual bitumen content and the particle size of tailings was studied in order to find the way to reducing the residual bitumen content in tailings. The results showed that the residual bitumen content in tailings decreased with a decreasing tailings particle size. After being milled for 30 min with a mortar, the tailings was reprocessed via extraction by means of the ASP agent, and the residual bitumen content in tailings decreased from 5.47% to 1.25%, which could comply with the disposal requirements.展开更多
A novel micro-emulsion was prepared by mixing an oil-soluble viscosity reducer,which was screened to aim at improving the heavy oil properties of Shengli oilfield with water-soluble surfactant and co-surfactant.The st...A novel micro-emulsion was prepared by mixing an oil-soluble viscosity reducer,which was screened to aim at improving the heavy oil properties of Shengli oilfield with water-soluble surfactant and co-surfactant.The static viscosity reduction and oil washing performance of the micro-emulsion were investigated,and the field application of the microemulsion used as heavy oil displacement agent was also reported.Results showed that the micro-emulsion exhibited excellent viscosity reduction performance for the studied heavy oil samples.When heavy oil was mixed with 0.5%of the micro-emulsion,a stable oil-in-water heavy oil emulsion could be formed.After the content of the micro-emulsion was increased to 3.0%,the oil removing rate reached up to 80%.Field application of the micro-emulsion to the Pai-601-Ping-115 well and the Pai-601-Ping-123 well was shown to be effective by increasing the periodic oil production up to 203 tons.展开更多
Soybean seed is a major source of protein and oil for human diet. Since not much information is available on the effects of chelating agents on soybean seed composition constituents, the current study aimed to investi...Soybean seed is a major source of protein and oil for human diet. Since not much information is available on the effects of chelating agents on soybean seed composition constituents, the current study aimed to investigate the effects of various chelating agents on soybean [(Glycine max (L.) Merr.)] seed protein, oil, fatty acids, and mineral concentrations. Three chelating agent [citric acid (CA), disodium EDTA (DA), and Salicylic acid (SA)] were applied separately or combined with ferrous (Fe2+) ion (CA + Fe, EDTA + Fe, and SA + Fe) to three-week-old soybean plants. After application, the plants were allowed to grow until harvest maturity under greenhouse conditions. The results showed that CA, DA, SA, and Fe resulted in an increase of oleic acid from 13.0% to 33.5%. However, these treatments resulted in a decrease of linolenic acid from 17.8 to 31.0%. The treatments with CA and SA applications increased protein from 2.9% to 3.4%. The treatments DA + Fe and SA + Fe resulted in an increase in oil from 6.8% to 7.9%. Seed macro- and micro-elements were also altered. The results indicated that the CA, SA, DA, and Fe treatments can alter seed protein, oil, fatty acids, and mineral concentrations. Further studies are needed for conclusive results.展开更多
The effect of expanding swept volume by iNanoW1.0 nanoparticles in ultra-low permeability core was studied by low-field nuclear magnetic resonance(LF-NMR)technology,and the mechanism of expanding swept volume was expl...The effect of expanding swept volume by iNanoW1.0 nanoparticles in ultra-low permeability core was studied by low-field nuclear magnetic resonance(LF-NMR)technology,and the mechanism of expanding swept volume was explained by oxygen spectrum nuclear magnetic resonance(17O-NMR)experiments and capillarity analysis.The results of the LF-NMR experiment show that the nano-sized oil-displacement agent iNanoW1.0 could increase the swept volume by 10%-20%on the basis of conventional water flooding,making water molecules get into the low permeable region with small pores that conventional water flooding could not reach.17O-NMR technique and capillary analysis proved that iNanoW1.0 nanoparticles could weaken the association of hydrogen bonds between water molecules,effectively change the structure of water molecular clusters,and thus increasing the swept volume in the low permeable region.The ability of weakening association of hydrogen bonds between water molecules of iNanoW1.0 nanoparticles increases with its mass fraction and tends to be stable after the mass fraction of 0.1%.展开更多
Two main challenges exist in enhancing oil recovery rate from tight oil reservoirs,namely how to create an effective complicated fracture network and how to enhance the imbibition effect of fracturing fluid.In respons...Two main challenges exist in enhancing oil recovery rate from tight oil reservoirs,namely how to create an effective complicated fracture network and how to enhance the imbibition effect of fracturing fluid.In response to the challenges,through modeling experiment in laboratory and evaluation of field application results,a set of integrated efficient fracturing and enhanced oil recovery(EOR)techniques suitable for tight oil development in China has been proposed.(1)Fracturing with temporary plugging agents to realize stimulation in multiple clusters,to form dense fracture network,and thus maximizing the drainage area;(2)Supporting induced fractures with micro-sized proppants during the prepad fluid fracture-making stage,to generate dense fracture network with high conductivity;(3)Using the liquid nanofluid as a fracturing fluid additive to increase oil-water displacement ratio and take advantage of the massive injected fracturing fluid and maximize the oil production after hydraulic fracturing.展开更多
The influence of different coating formulas and times on the water and oil resistance of paperboard was studied. The water and oil resistance of paperboard coated with a modified butadiene-styrene copolymer latex and ...The influence of different coating formulas and times on the water and oil resistance of paperboard was studied. The water and oil resistance of paperboard coated with a modified butadiene-styrene copolymer latex and fluorinated anion grease-proof agent was better than that coated with modified butadiene-styrene copolymer latex,where the modified butadiene-styrene copolymer latex was used as the pre-coating substrate and the F1516 fluorinated grease-proof agent was used as the top coating material. By coating modified butadiene-styrene copolymer latex with 30% solid content and F1516 fluorinated grease-proof agent with 24% solid content,the oil resistance of paperboard could reach anti-oil grade 12 and the water resistance could increased by98. 64%( compared with the base paperboard without any coating treatment).展开更多
基金supported by Shanghai Sail Program(No.19YF1458000).
文摘Oil cleaning agents generated from nuclear power plants(NPPs)are radioactive organic liquid wastes.To date,because there are no satisfactory industrial treatment measures,these wastes can only be stored for a long time.In this work,the optimization for the supercritical water oxidation(SCWO)of the spent organic solvent was investigated.The main process parameters of DURSET(oil cleaning agent)SCWO,such as temperature,reaction time,and excess oxygen coefficient,were optimized using response surface methodology,and a quadratic polynomial model was obtained.The determination coefficient(R^(2))of the model is 0.9812,indicating that the model is reliable.The optimized process conditions were at 515 C,66 s,and an excess oxygen coefficient of 211%.Under these conditions,the chemical oxygen demand removal of organic matter could reach 99.5%.The temperature was found to be the main factor affecting the SCWO process.Ketones and benzene-based compounds may be the main intermediates in DURSET SCWO.This work provides basic data for the industrialization of the degradation of spent organic solvents from NPP using SCWO technology.
文摘The emulsion stability of oilfield produced water is related to the oil-water interfacial film strength and the zeta potential of the oil droplets. We investigated the effects of water treatment agents （corrosion inhibitor SL-2, scale inhibitor HEDP, germicide 1227, and flocculant polyaluminium chloride PAC） on the stability of oilfield produced water. The influence of these treatment agents on oil-water interfacial properties and the mechanism of these agents acting on the oilfield produced water were studied by measuring the interfacial shear viscosity, interfacial tension and zeta electric potential. The results indicated that the scale inhibitor HEDP could increase the oil-water interfacial film strength, and it could also increase the absolute value of the zeta potential of oil droplets. HEDP played an important role in the stability of the emulsion. Polyaluminum chloride （PAC） reduced the stability of the emulsion by considerably decreasing the absolute value of the zeta potential of oil droplets. Corrosion inhibitor SL-2 and germicide 1227 could decrease the oil-water interfacial tension, whereas they had little influence on oil-water interfacial shear viscosity and oil-water interfacial electricity properties.
文摘The caustic alkali-free water extraction agents were studied for treating the oil sands excavated from Inner Mongolia, China. Several kinds of chemical reagents were evaluated, among which sodium carbonate(SC), sodium dodecyl benzene sulfonate(SD) and sodium chloride were confirmed as composite solutes. Their proportion was optimized by an orthogonal test. The optimum proportion of the composite agent covered 0.03% of SD, 0.50% of sodium chloride, 3.00% of SC, with the rest composed of water. The optimal operating condition was also confirmed. The oil sands were extracted at the following optimized conditions: a treating time of 15 min, a temperature of 80 ℃ and an extraction agent/feed ratio of 1:1, with the bitumen yield reaching more than 96%. The extraction agent after separation from the bitumen product can be recycled for reuse to carve out a good environmentally friendly route.
文摘A self-developed ASP agent was used to separate bitumen from Indonesia's oil sands by its comprehensive effect and the separation condition was well investigated. The bitumen extraction conditions for industrial application were recommended to cover a mixing temperature of 80℃, a mixing time of 40 min, a mass ratio of ASP agent to oil sands of 4:10, and a floating time of 10 min. Under the above conditions, the bitumen recovery was about 86% and the residual bitumen content in tailings was about 6%. The relationship between the residual bitumen content and the particle size of tailings was studied in order to find the way to reducing the residual bitumen content in tailings. The results showed that the residual bitumen content in tailings decreased with a decreasing tailings particle size. After being milled for 30 min with a mortar, the tailings was reprocessed via extraction by means of the ASP agent, and the residual bitumen content in tailings decreased from 5.47% to 1.25%, which could comply with the disposal requirements.
基金This work was supported by the 13th Fiveyear Plan National Key Project of China(No.2016ZX05011-003-004 and No.2017ZX05049-003-008).
文摘A novel micro-emulsion was prepared by mixing an oil-soluble viscosity reducer,which was screened to aim at improving the heavy oil properties of Shengli oilfield with water-soluble surfactant and co-surfactant.The static viscosity reduction and oil washing performance of the micro-emulsion were investigated,and the field application of the microemulsion used as heavy oil displacement agent was also reported.Results showed that the micro-emulsion exhibited excellent viscosity reduction performance for the studied heavy oil samples.When heavy oil was mixed with 0.5%of the micro-emulsion,a stable oil-in-water heavy oil emulsion could be formed.After the content of the micro-emulsion was increased to 3.0%,the oil removing rate reached up to 80%.Field application of the micro-emulsion to the Pai-601-Ping-115 well and the Pai-601-Ping-123 well was shown to be effective by increasing the periodic oil production up to 203 tons.
文摘Soybean seed is a major source of protein and oil for human diet. Since not much information is available on the effects of chelating agents on soybean seed composition constituents, the current study aimed to investigate the effects of various chelating agents on soybean [(Glycine max (L.) Merr.)] seed protein, oil, fatty acids, and mineral concentrations. Three chelating agent [citric acid (CA), disodium EDTA (DA), and Salicylic acid (SA)] were applied separately or combined with ferrous (Fe2+) ion (CA + Fe, EDTA + Fe, and SA + Fe) to three-week-old soybean plants. After application, the plants were allowed to grow until harvest maturity under greenhouse conditions. The results showed that CA, DA, SA, and Fe resulted in an increase of oleic acid from 13.0% to 33.5%. However, these treatments resulted in a decrease of linolenic acid from 17.8 to 31.0%. The treatments with CA and SA applications increased protein from 2.9% to 3.4%. The treatments DA + Fe and SA + Fe resulted in an increase in oil from 6.8% to 7.9%. Seed macro- and micro-elements were also altered. The results indicated that the CA, SA, DA, and Fe treatments can alter seed protein, oil, fatty acids, and mineral concentrations. Further studies are needed for conclusive results.
基金Supported by the PetroChina Scientifc Research and Technological Development Project(2018A-0907).
文摘The effect of expanding swept volume by iNanoW1.0 nanoparticles in ultra-low permeability core was studied by low-field nuclear magnetic resonance(LF-NMR)technology,and the mechanism of expanding swept volume was explained by oxygen spectrum nuclear magnetic resonance(17O-NMR)experiments and capillarity analysis.The results of the LF-NMR experiment show that the nano-sized oil-displacement agent iNanoW1.0 could increase the swept volume by 10%-20%on the basis of conventional water flooding,making water molecules get into the low permeable region with small pores that conventional water flooding could not reach.17O-NMR technique and capillary analysis proved that iNanoW1.0 nanoparticles could weaken the association of hydrogen bonds between water molecules,effectively change the structure of water molecular clusters,and thus increasing the swept volume in the low permeable region.The ability of weakening association of hydrogen bonds between water molecules of iNanoW1.0 nanoparticles increases with its mass fraction and tends to be stable after the mass fraction of 0.1%.
基金Supported by the China National Science and Technology Major Project(2016ZX05051-03,2016ZX05030-05)PetroChina Innovation Foundation(2018D-5007-0205)the Science Foundation of China University of Petroleum at Beijing(2462017YJRC031).
文摘Two main challenges exist in enhancing oil recovery rate from tight oil reservoirs,namely how to create an effective complicated fracture network and how to enhance the imbibition effect of fracturing fluid.In response to the challenges,through modeling experiment in laboratory and evaluation of field application results,a set of integrated efficient fracturing and enhanced oil recovery(EOR)techniques suitable for tight oil development in China has been proposed.(1)Fracturing with temporary plugging agents to realize stimulation in multiple clusters,to form dense fracture network,and thus maximizing the drainage area;(2)Supporting induced fractures with micro-sized proppants during the prepad fluid fracture-making stage,to generate dense fracture network with high conductivity;(3)Using the liquid nanofluid as a fracturing fluid additive to increase oil-water displacement ratio and take advantage of the massive injected fracturing fluid and maximize the oil production after hydraulic fracturing.
文摘The influence of different coating formulas and times on the water and oil resistance of paperboard was studied. The water and oil resistance of paperboard coated with a modified butadiene-styrene copolymer latex and fluorinated anion grease-proof agent was better than that coated with modified butadiene-styrene copolymer latex,where the modified butadiene-styrene copolymer latex was used as the pre-coating substrate and the F1516 fluorinated grease-proof agent was used as the top coating material. By coating modified butadiene-styrene copolymer latex with 30% solid content and F1516 fluorinated grease-proof agent with 24% solid content,the oil resistance of paperboard could reach anti-oil grade 12 and the water resistance could increased by98. 64%( compared with the base paperboard without any coating treatment).
