Nano-scale CuF_(2) with superior electrochemical activity was successfully prepared by a mixed solvent co-precipitation method.The SEM and TEM analyses demonstrated that the methanol concentration had a pronounced eff...Nano-scale CuF_(2) with superior electrochemical activity was successfully prepared by a mixed solvent co-precipitation method.The SEM and TEM analyses demonstrated that the methanol concentration had a pronounced effect on both the particle size and the extent of agglomeration.With the increase in methanol content,the particle size and agglomeration of CuF_(2) decreased first and then increased.When the volume ratio of methanol to deionized water was 1:1,the CuF_(2) particles exhibited the smallest size and the lowest degree of agglomeration.CuF_(2) synthesized with 50%methanol exhibited superior electrochemical performances with a voltage plateau above 3 V and a 1st discharge capacity of 525.8 mAh·g^(-1) at 0.01 C due to the synergistic influence of the particle size and dispersion.The analysis results using electrochemical impedance spectroscopy(EIS)and constant current intermittent titration technique(GITT)affirmed the addition of methanol was beneficial for promoting Li+diffusion and accelerating electrochemical reaction kinetics of CuF_(2).展开更多
The Richtmyer–Meshkov(RM)instability plays an important role in various natural and engineering fields such as inertial confinement fusion.In this study,the effect of relaxation time on the RM instability under resho...The Richtmyer–Meshkov(RM)instability plays an important role in various natural and engineering fields such as inertial confinement fusion.In this study,the effect of relaxation time on the RM instability under reshock impact is investigated using a two-component discrete Boltzmann method.The hydrodynamic and thermodynamic characteristics of the fluid system are comprehensively analyzed from the perspectives of the density gradient,vorticity,kinetic energy,mixing degree,mixing width and non-equilibrium intensity.Simulation results indicate that for longer relaxation time,the diffusion and dissipation are enhanced,the physical gradients decrease,and the growth of the interface is suppressed.Furthermore,the non-equilibrium manifestations show complex patterns,driven by the competitive physical mechanisms of the diffusion,dissipation,shock wave,rarefaction wave,transverse wave and fluid instabilities.These findings provide valuable insight into the fundamental mechanism of compressible fluid flows.展开更多
A wavelet collocation method with nonlinear auto companding is proposed for behavioral modeling of switched current circuits.The companding function is automatically constructed according to the initial error distri...A wavelet collocation method with nonlinear auto companding is proposed for behavioral modeling of switched current circuits.The companding function is automatically constructed according to the initial error distribution obtained through approximating the input output function of the SI circuit by conventional wavelet collocation method.In practical applications,the proposed method is a general purpose approach,by which both the small signal effect and the large signal effect are modeled in a unified formulation to ease the process of modeling and simulation.Compared with the published modeling approaches,the proposed nonlinear auto companding method works more efficiently not only in controlling the error distribution but also in reducing the modeling errors.To demonstrate the promising features of the proposed method,several SI circuits are employed as examples to be modeled and simulated.展开更多
Influence of three different preparation methods, i.e. impregnation, coprecipitation, and inverse coprecipitation, on the preferential oxidation of CO in excess hydrogen （PROX） over CuO-CeO2 catalysts has been inves...Influence of three different preparation methods, i.e. impregnation, coprecipitation, and inverse coprecipitation, on the preferential oxidation of CO in excess hydrogen （PROX） over CuO-CeO2 catalysts has been investigated and CuO-CeO2 catalysts are characterized using BET, XPS, XRD, UV Raman, and TPR techniques. The results show that the catalysts prepared by coprecipitation have smaller particle sizes, well-dispersed CuOx species, more oxygen vacancies, and are more active in the PROX than those prepared by the other methods. However. the inverse coprecipitation depresses the catalytic performance of CuO-CeO2 catalysts and causes the growth of CuO-CeO2 because of different pH value in the precipitation process.展开更多
A series of TiO 2-MoO 3 nano-composite photocatalysts were prepared by supercritical fluid dry method(SCFD) and an impregnation technique with TiCl 4 and (NH 4) 6Mo 7O 24 ·4H 2O as the starting materia...A series of TiO 2-MoO 3 nano-composite photocatalysts were prepared by supercritical fluid dry method(SCFD) and an impregnation technique with TiCl 4 and (NH 4) 6Mo 7O 24 ·4H 2O as the starting materials. The catalysts were characterized by the means of XRD, TEM and UV-Vis. Methyl orange was used as model compound for the evaluation of their catalytic activities. The results indicated that the photo-catalyst prepared by SCFD had the advantages of small size(12.84 nm), narrow distribution and good dispersivity. The presence of small amount of Mo in composite catalyst gives rise to the red shift of its absorbance wavelength, decrease of its energy gap and increase of the utility of visible light. Furthermore, higher surface acidity of the photo-catalyst was obtained as the result of the addition of MoO 3. Compared with pure TiO 2, the catalytic activity of the TiO 2-MoO 3 nano-composite photo-catalyst was improved significantly. As the doping concentration of the composite catalysts was controlled at 0.6%(molar percentage), 100% degradation of methyl orange was achieved with in 1.2 h irradiation time.展开更多
Mycotoxins and their derivatives since their discoveries and until the present time are behind unspecified economic and medical damages.Aflatoxins are classified according to their physical–chemical and toxicological...Mycotoxins and their derivatives since their discoveries and until the present time are behind unspecified economic and medical damages.Aflatoxins are classified according to their physical–chemical and toxicological characters in the most dangerous row of the mycotoxins.These aflatoxins are in part responsible,of irreversible medical disasters that are not easily manageable such as cancer of the liver and kidneys,and in the other part,of losses in the stored cereal products.Based on these crucial findings,monitoring of this toxin became imperative in post-harvest food products,during storage,during transformation chain and even during the long phases of conservation.Vigilance of this toxin is delivered by detection methods using very advanced technologies to respond in the shortest possible times.In addition,the knowledge of factors supporting the biosynthesis of aflatoxins such as the temperature,moisture content,concentration of nitrogen and carbon,and the molecules responsible for the genetic control of the synthesis will be reflected later in the choice of bio-control techniques.This control is currently based on new strategies using the bioactives substances of the plants,the lactic bacteria and some strains of actinomycetes that have good inhibiting activity against aflatoxins with fewer side effects on Man.On the other hand,this brief review summarizes the results of new studies demonstrating the toxicity of the toxin,new detection methods and bio-control.展开更多
Calcined kaolin/TiO2 composite particle material （CK/TCPM） was prepared with TiO2 coating on the surfaces of calcined kaolin particles by the mechano-chemical method. X-ray diffraction （XRD） and scanning electron ...Calcined kaolin/TiO2 composite particle material （CK/TCPM） was prepared with TiO2 coating on the surfaces of calcined kaolin particles by the mechano-chemical method. X-ray diffraction （XRD） and scanning electron microscope （SEM） were used to investigate the microstructures and morphologies, respectively. The mechanism of the mechano-chemical reaction between calcined kaolin and TiO2 was studied by infrared spectra （IR）. The results show that TiO2 coats evenly on the surfaces of calcined kaolin particles by Si-O-Ti and Al-O-Ti bonds on their interfaces. The hiding power and whiteness of CK/TCPM are 17.12 g/m^2 and 95.7%, respectively, presenting its similarity to TiO2 in pigment properties.展开更多
Since their seminal discovery in 2011,two-dimensional(2D)transition metal carbides/nitrides known as MXenes,that constitute a large family of 2D materials,have been targeted toward various applications due to their ou...Since their seminal discovery in 2011,two-dimensional(2D)transition metal carbides/nitrides known as MXenes,that constitute a large family of 2D materials,have been targeted toward various applications due to their outstanding electronic properties.MXenes functioning as co-catalyst in combination with certain photocatalysts have been applied in photocatalytic systems to enhance photogenerated charge separation,suppress rapid charge recombination,and convert solar energy into chemical energy or use it in the degradation of organic compounds.The photocatalytic performance greatly depends on the composition and morphology of the photocatalyst,which,in turn,are determined by the method of preparation used.Here,we review the four different synthesis methods(mechanical mixing,self-assembly,in situ decoration,and oxidation)reported for MXenes in view of their application as co-catalyst in photocatalysis.In addition,the working mechanism for MXenes application in photocatalysis is discussed and an outlook for future research is also provided.展开更多
The offshore pipeline network in the U.S. Gulf of Mexico is the largest and most transparent system in the world. A review of deepwater projects in the region provides insight into construction cost and installation m...The offshore pipeline network in the U.S. Gulf of Mexico is the largest and most transparent system in the world. A review of deepwater projects in the region provides insight into construction cost and installation methods and the evolution of contract strategies. Pipeline projects are identified as export systems, infield flowline systems, and combined export and infield systems, and three dozen deepwater pipeline installations from 1980–2014 are described based on Offshore Technology Conference(OTC) and Society of Petroleum Engineers(SPE) industry publications and press release data. Export lines and infield flowlines are equally represented and many projects used a combination of J-lay, S-lay and reel methods with rigid steel, flexible line, and pipe-in-pipe systems. The average 2014 inflation-adjusted cost for pipeline projects based on OTC/SPE publications was $2.76 million/mi and ranged from $520 000/mi to $12.94 million/mi. High cost pipelines tend to be short segments or specialized pipeline. Excluding the two cost endpoints, the majority of projects ranged from $1 to $6 million/mi. The average inflation-adjusted cost to install deepwater pipelines in the U.S. Gulf of Mexico based on available public data is estimated at $3.1 million/mi.展开更多
A cardiac vector model is presented and verified, and then the forward problem for cardiac magnetic fields and electric potential are discussed based on this model and the realistic human torso volume conductor model,...A cardiac vector model is presented and verified, and then the forward problem for cardiac magnetic fields and electric potential are discussed based on this model and the realistic human torso volume conductor model, including lungs. A torso-cardiac vector model is used for a 12-lead electrocardiographic （ECG） and magneto-cardiogram （MCG） simulation study by using the boundary element method （BEM）. Also, we obtain the MCG wave picture using a compound four-channel HTc.SQUID system in a magnetically shielded room. By comparing the simulated results and experimental results, we verify the cardiac vector model and then do a preliminary study of the forward problem of MCG and ECG. Therefore, the results show that the vector model is reasonable in cardiac electrophysiology.展开更多
The CuO-CeO2 catalyst prepared by chelating method has a superior catalytic performance for the preferential oxidation of CO in rich hydrogen, compared with the CuO-CeO2 catalyst prepared by coprecipitation method. Th...The CuO-CeO2 catalyst prepared by chelating method has a superior catalytic performance for the preferential oxidation of CO in rich hydrogen, compared with the CuO-CeO2 catalyst prepared by coprecipitation method. The CO conversions over these catalysts, at 120 ℃ and 120000 ml/（g-h） in the absence of CO2 and H2O, are 99.6% and 88.6%, respectively, and the selectivity of O2 over these catalysts is very close （i.e. 51.3% and 55.8%, respectively）. The influence of certain factors such as hydrogen concentration, carbon monoxide concentration, H2O, O2/CO ratios, and space velocity on the catalytic performance of CuO-CeO2 catalyst prepared by chelating method is also studied. The results show that the addition of hydrogen and H2O has a negative effect on the catalytic performance of CuO-CeO2 catalyst, however, the variation of space velocity and the O2/CO ratio causes a comparatively slight influence.展开更多
A novel, high-temperature, mechano-chemical（HTMC） method was developed to synthesise singlephase Sr_2CeO_4：Eu^（3＋）phosphor. Phosphors were characterised by X-ray diffraction（XRD）, scanning electron microscopy...A novel, high-temperature, mechano-chemical（HTMC） method was developed to synthesise singlephase Sr_2CeO_4：Eu^（3＋）phosphor. Phosphors were characterised by X-ray diffraction（XRD）, scanning electron microscopy（SEM）, and luminescence spectra. Compared with phosphors prepared by the traditional hightemperature solid state method and citric acid gel method, single-phase Sr_2CeO_4：Eu^（3＋）powders by using the HTMC method, with small average particle sizes of about 5 μm, a narrow size distribution range and uniform dispersion, were prepared at 800 ℃, and reached their maximum luminescent intensity at 900 ℃.Under ultraviolet excitation at 298 nm, the sample showed good luminescence with the strongest red light of 616 nm. However, Sr_2CeO_4：Eu^（3＋）was prepared at the higher temperature of 1100 ℃ by solid state method and citric acid gel method. The particle size was too large and uneven with phosphor agglomeration by high-temperature solid state method. The luminescent intensity reached a maximum for Sr_2CeO_4：Eu^（3＋）phosphor at a synthesis temperature of 1100 ℃ by using the high-temperature solid state method, and at 1200 ℃ by both citric acid gel and chemical precipitation methods. Furthermore, the advantages of the Sr_2CeO_4：Eu^（3＋）powder prepared by HTMC method were discussed compared with that prepared using traditional high-temperature solid state and citric acid gel methods.展开更多
In this article, we introduce a hybrid iterative scheme for finding a common element of the set of solutions for a generalized equilibrium problems, the set of common fixed point for a family of infinite k-strict pseu...In this article, we introduce a hybrid iterative scheme for finding a common element of the set of solutions for a generalized equilibrium problems, the set of common fixed point for a family of infinite k-strict pseudo-contractive mappings, and the set of solutions of the variational inclusion problem with multi-valued maximal monotone mappings and inverse-strongly monotone mappings in Hilbert space. Under suitable conditions, some strong convergence theorems are proved. Our results extends the recent results in G.L.Acedo and H.K.Xu [2], Zhang, Lee and Chan [8], Wakahashi and Toyoda [9], Takahashi and Takahashi [I0] and S. S. Chang, H. W. Joseph Lee and C. K. Chan [II], S.Takahashi and W.Takahashi [12]. Moreover, the method of proof adopted in this article is different from those of [4] and [12].展开更多
Mn-Zn ferrites doped with different contents of Sm^（3＋） and Gd^（3＋） ions were prepared by sol-gel auto-combustion method and characterized by Fourier transform infrared spectroscopy（FTIR）, thermogravimetric an...Mn-Zn ferrites doped with different contents of Sm^（3＋） and Gd^（3＋） ions were prepared by sol-gel auto-combustion method and characterized by Fourier transform infrared spectroscopy（FTIR）, thermogravimetric analysis（TG）, X-ray diffraction（XRD）, scanning electron microscopy（SEM） and vibrating sample magnetometer（VSM）. When samples were calcined in a relatively low temperature below 1100 °C, secondary phases（α-Fe_2O_3） could be identified. Therefore, in order to acquire pure and better crystallinity, the suitable calcining temperature of powders was selected at 1200 °C. It was also found that all the samples consisting of ferrite phases of typical spinel cubic structure and average crystallite sizes between 31.5 and 38.2 nm were obtained after calcining at 1200 oC for 4 h. The lattice parameters increased almost linearly with increasing Sm content. A dense microstructure was obtained after sintering at 1250 °C for 4 h. Through the analysis of magnetic properties, hysteresis loops for all the samples were narrow with low values of coercivity and retentivity, indicating the paramagnetic nature of these samples. And saturation magnetization Ms strongly depended on the type of additive to reach a maximum of 47.99 emu/g for x=0.015, which showed a great promise for hyperthermia applications.展开更多
Nanocrystalline ZnO thin films have been fabricated by a multi-step solgel method using spin coating technique. Zinc acetate dihydrate, 2-methoxyethanol and monoethanolamine were used as a starting material, solvent a...Nanocrystalline ZnO thin films have been fabricated by a multi-step solgel method using spin coating technique. Zinc acetate dihydrate, 2-methoxyethanol and monoethanolamine were used as a starting material, solvent and stabilizer, respectively. X-Ray Diffraction (XRD) and Scanning Electron Microscopy (SEM) were employed to characterize structure and morphologies of the as-deposited samples. The results of XRD and SEM showed that the heat treatment conditions, final rotational (spinning) speed, fume exhaust and precise control of concentration of reactants (precursor and solvent used) strongly affect the crystallographic orientation and morphology of the resultant ZnO films. The XRD pattern showed that the ZnO films formed the preferred orientation along c-axis and the grain size is 16nm for the samples. Only one peak corresponding to the (002) plane at 2θ = 34.34 appears on the diffractograms. The as-deposited films had a transparency of greater than 80% in the visible-near IR region from 400 nm - 800 nm. The optical band gap energy and thickness were calculated to be 3.296 eV and 266 nm respectively.展开更多
The combustion characteristics of biomass, anthracite coal and their blends were investigated using thermogravimetry, and the kinetic parameters and combustion reaction mechanisms were tested by combining the iso-conv...The combustion characteristics of biomass, anthracite coal and their blends were investigated using thermogravimetry, and the kinetic parameters and combustion reaction mechanisms were tested by combining the iso-conversional method and Avrami method in order to find out the kinetics characteristics responsible for the combustion of samples. In biomass combustion, two peaks were observed at 332.3 and 472.3℃, but the reactive rate curve of coal showed one peak with maximum mass loss rate at 552.8℃. The ignition temperature and burnout temperature of blends decreased, and the ignition index and combustibility index increased with the increase in biomass content. Calculation of kinetic parameters showed that the values of activation energy of blends increased with increasing biomass content from 150.77 to 215.93 kJ/mol. The reaction orders of blends lay in the range of 0.44 and 0.78.展开更多
Copper indium disulfide（CuInS2） nano-particles were synthesized by solvothermal method at 150 ℃ using copper（？） chloride,indium（Ш） chloride,thiourea and ethanol as raw materials,and characterized by X-ray dif...Copper indium disulfide（CuInS2） nano-particles were synthesized by solvothermal method at 150 ℃ using copper（？） chloride,indium（Ш） chloride,thiourea and ethanol as raw materials,and characterized by X-ray diffraction（XRD）,field-emission scanning electron microscope（FESEM）,and UV-Vis spectra.The effects of pH value on its micro-structures and optical properties were investigated.The results show that,with the pH value increasing,the particle size of the nano-crystalline CuInS2 increases,and its band gap becomes narrower under alkaline condition.The band gaps of CuInS2 nano-particles are from 1.52 eV to 1.93 eV,which makes them promising candidates as absorber materials for photovoltaic applications.展开更多
This paper obtains a strong convergence theorem for k-strictly pseudo-contractive mapping under the framework of Hilbert spaces using CQ method. Due to the fact that non-expansive mapping is only O-strictly pseudo-con...This paper obtains a strong convergence theorem for k-strictly pseudo-contractive mapping under the framework of Hilbert spaces using CQ method. Due to the fact that non-expansive mapping is only O-strictly pseudo-contractive, the main result obtained in this paper extends the corresponding main result of Nakajo-Takahashi from non-expansive mapping to k-strictly pseudo-contractive one, where k∈ [0,1）.展开更多
The microbially cemented sand(MCS)material is a new building material with a broad research prospect,although the nationwide cold wave affects the mechanical properties of the material in the practical application.The...The microbially cemented sand(MCS)material is a new building material with a broad research prospect,although the nationwide cold wave affects the mechanical properties of the material in the practical application.The microstructure of MCS is obtained by computed tomography(CT)and scanning electron microscope(SEM);the thermodynamic mathematical model is established by considering the particle shapes and bonding state based on direct element method(DEM).By studying the damage of temperature drop amplitude and cooling duration to MCS material under the effect of cold wave,the following conclusions are drawn.For a given temperature drop range,an increased cooling time can aggravate the material damage.In addition,a rapid drop in temperature can cause serious damage to the material.The cracks generated by the temperature stress propagate in the direction of the weaker component of the material.The DEM model can be better used to analyze the damage of the MCS structure induced by cold wave.展开更多
This paper proposes a new hybrid variant of extragradient methods for finding a common solution of an equilibrium problem and a family of strict pseudo-contraction mappings. We present an algorithmic scheme that combi...This paper proposes a new hybrid variant of extragradient methods for finding a common solution of an equilibrium problem and a family of strict pseudo-contraction mappings. We present an algorithmic scheme that combine the idea of an extragradient method and a successive iteration method as a hybrid variant. Then, this algorithm is modified by projecting on a suitable convex set to get a better convergence property. The convergence of two these algorithms are investigated under certain assumptions.展开更多
文摘Nano-scale CuF_(2) with superior electrochemical activity was successfully prepared by a mixed solvent co-precipitation method.The SEM and TEM analyses demonstrated that the methanol concentration had a pronounced effect on both the particle size and the extent of agglomeration.With the increase in methanol content,the particle size and agglomeration of CuF_(2) decreased first and then increased.When the volume ratio of methanol to deionized water was 1:1,the CuF_(2) particles exhibited the smallest size and the lowest degree of agglomeration.CuF_(2) synthesized with 50%methanol exhibited superior electrochemical performances with a voltage plateau above 3 V and a 1st discharge capacity of 525.8 mAh·g^(-1) at 0.01 C due to the synergistic influence of the particle size and dispersion.The analysis results using electrochemical impedance spectroscopy(EIS)and constant current intermittent titration technique(GITT)affirmed the addition of methanol was beneficial for promoting Li+diffusion and accelerating electrochemical reaction kinetics of CuF_(2).
基金supported by the National Natural Science Foundation of China(Grant No.U2242214)the Guangdong Basic and Applied Basic Research Foundation(Grant No.2024A1515010927)+3 种基金the Humanities and Social Science Foundation of the Ministry of Education in China(Grant No.24YJCZH163)the Fujian Provincial Units Special Funds for Education and Research(Grant No.2022639)Fundamental Research Funds for the Central Universities,Sun Yatsen University(Grant No.24qnpy044)partly supported by the Open Research Fund of Key Laboratory of Analytical Mathematics and Applications(Fujian Normal University),Ministry of Education,P.R.China(Grant No.JAM2405)。
文摘The Richtmyer–Meshkov(RM)instability plays an important role in various natural and engineering fields such as inertial confinement fusion.In this study,the effect of relaxation time on the RM instability under reshock impact is investigated using a two-component discrete Boltzmann method.The hydrodynamic and thermodynamic characteristics of the fluid system are comprehensively analyzed from the perspectives of the density gradient,vorticity,kinetic energy,mixing degree,mixing width and non-equilibrium intensity.Simulation results indicate that for longer relaxation time,the diffusion and dissipation are enhanced,the physical gradients decrease,and the growth of the interface is suppressed.Furthermore,the non-equilibrium manifestations show complex patterns,driven by the competitive physical mechanisms of the diffusion,dissipation,shock wave,rarefaction wave,transverse wave and fluid instabilities.These findings provide valuable insight into the fundamental mechanism of compressible fluid flows.
文摘A wavelet collocation method with nonlinear auto companding is proposed for behavioral modeling of switched current circuits.The companding function is automatically constructed according to the initial error distribution obtained through approximating the input output function of the SI circuit by conventional wavelet collocation method.In practical applications,the proposed method is a general purpose approach,by which both the small signal effect and the large signal effect are modeled in a unified formulation to ease the process of modeling and simulation.Compared with the published modeling approaches,the proposed nonlinear auto companding method works more efficiently not only in controlling the error distribution but also in reducing the modeling errors.To demonstrate the promising features of the proposed method,several SI circuits are employed as examples to be modeled and simulated.
文摘Influence of three different preparation methods, i.e. impregnation, coprecipitation, and inverse coprecipitation, on the preferential oxidation of CO in excess hydrogen （PROX） over CuO-CeO2 catalysts has been investigated and CuO-CeO2 catalysts are characterized using BET, XPS, XRD, UV Raman, and TPR techniques. The results show that the catalysts prepared by coprecipitation have smaller particle sizes, well-dispersed CuOx species, more oxygen vacancies, and are more active in the PROX than those prepared by the other methods. However. the inverse coprecipitation depresses the catalytic performance of CuO-CeO2 catalysts and causes the growth of CuO-CeO2 because of different pH value in the precipitation process.
文摘A series of TiO 2-MoO 3 nano-composite photocatalysts were prepared by supercritical fluid dry method(SCFD) and an impregnation technique with TiCl 4 and (NH 4) 6Mo 7O 24 ·4H 2O as the starting materials. The catalysts were characterized by the means of XRD, TEM and UV-Vis. Methyl orange was used as model compound for the evaluation of their catalytic activities. The results indicated that the photo-catalyst prepared by SCFD had the advantages of small size(12.84 nm), narrow distribution and good dispersivity. The presence of small amount of Mo in composite catalyst gives rise to the red shift of its absorbance wavelength, decrease of its energy gap and increase of the utility of visible light. Furthermore, higher surface acidity of the photo-catalyst was obtained as the result of the addition of MoO 3. Compared with pure TiO 2, the catalytic activity of the TiO 2-MoO 3 nano-composite photo-catalyst was improved significantly. As the doping concentration of the composite catalysts was controlled at 0.6%(molar percentage), 100% degradation of methyl orange was achieved with in 1.2 h irradiation time.
文摘Mycotoxins and their derivatives since their discoveries and until the present time are behind unspecified economic and medical damages.Aflatoxins are classified according to their physical–chemical and toxicological characters in the most dangerous row of the mycotoxins.These aflatoxins are in part responsible,of irreversible medical disasters that are not easily manageable such as cancer of the liver and kidneys,and in the other part,of losses in the stored cereal products.Based on these crucial findings,monitoring of this toxin became imperative in post-harvest food products,during storage,during transformation chain and even during the long phases of conservation.Vigilance of this toxin is delivered by detection methods using very advanced technologies to respond in the shortest possible times.In addition,the knowledge of factors supporting the biosynthesis of aflatoxins such as the temperature,moisture content,concentration of nitrogen and carbon,and the molecules responsible for the genetic control of the synthesis will be reflected later in the choice of bio-control techniques.This control is currently based on new strategies using the bioactives substances of the plants,the lactic bacteria and some strains of actinomycetes that have good inhibiting activity against aflatoxins with fewer side effects on Man.On the other hand,this brief review summarizes the results of new studies demonstrating the toxicity of the toxin,new detection methods and bio-control.
基金Funded by the National Key Technology R&D Program of China(No.2008BAE60B06)Beijing Municipal Science&Technology Commission (No.Z080003032208015)
文摘Calcined kaolin/TiO2 composite particle material （CK/TCPM） was prepared with TiO2 coating on the surfaces of calcined kaolin particles by the mechano-chemical method. X-ray diffraction （XRD） and scanning electron microscope （SEM） were used to investigate the microstructures and morphologies, respectively. The mechanism of the mechano-chemical reaction between calcined kaolin and TiO2 was studied by infrared spectra （IR）. The results show that TiO2 coats evenly on the surfaces of calcined kaolin particles by Si-O-Ti and Al-O-Ti bonds on their interfaces. The hiding power and whiteness of CK/TCPM are 17.12 g/m^2 and 95.7%, respectively, presenting its similarity to TiO2 in pigment properties.
基金supported by the National Natural Science Foundation of China(No.11574111 and No.11974129 to X.-F.W.)“the Fundamental Research Funds for the Central Universities.”.
文摘Since their seminal discovery in 2011,two-dimensional(2D)transition metal carbides/nitrides known as MXenes,that constitute a large family of 2D materials,have been targeted toward various applications due to their outstanding electronic properties.MXenes functioning as co-catalyst in combination with certain photocatalysts have been applied in photocatalytic systems to enhance photogenerated charge separation,suppress rapid charge recombination,and convert solar energy into chemical energy or use it in the degradation of organic compounds.The photocatalytic performance greatly depends on the composition and morphology of the photocatalyst,which,in turn,are determined by the method of preparation used.Here,we review the four different synthesis methods(mechanical mixing,self-assembly,in situ decoration,and oxidation)reported for MXenes in view of their application as co-catalyst in photocatalysis.In addition,the working mechanism for MXenes application in photocatalysis is discussed and an outlook for future research is also provided.
基金provided through the U.S. Department of the Interior, Bureau of Ocean Energy Management
文摘The offshore pipeline network in the U.S. Gulf of Mexico is the largest and most transparent system in the world. A review of deepwater projects in the region provides insight into construction cost and installation methods and the evolution of contract strategies. Pipeline projects are identified as export systems, infield flowline systems, and combined export and infield systems, and three dozen deepwater pipeline installations from 1980–2014 are described based on Offshore Technology Conference(OTC) and Society of Petroleum Engineers(SPE) industry publications and press release data. Export lines and infield flowlines are equally represented and many projects used a combination of J-lay, S-lay and reel methods with rigid steel, flexible line, and pipe-in-pipe systems. The average 2014 inflation-adjusted cost for pipeline projects based on OTC/SPE publications was $2.76 million/mi and ranged from $520 000/mi to $12.94 million/mi. High cost pipelines tend to be short segments or specialized pipeline. Excluding the two cost endpoints, the majority of projects ranged from $1 to $6 million/mi. The average inflation-adjusted cost to install deepwater pipelines in the U.S. Gulf of Mexico based on available public data is estimated at $3.1 million/mi.
基金supported by the State Key Development Program for Basic Research of China (Grant No. 2011CBA00106)the National Natural Science Foundation of China (Grant Nos. 10674006, 81171421, and 61101046)the National High Technology Research and Development Program of China (Grant No. 2007AA03Z238)
文摘A cardiac vector model is presented and verified, and then the forward problem for cardiac magnetic fields and electric potential are discussed based on this model and the realistic human torso volume conductor model, including lungs. A torso-cardiac vector model is used for a 12-lead electrocardiographic （ECG） and magneto-cardiogram （MCG） simulation study by using the boundary element method （BEM）. Also, we obtain the MCG wave picture using a compound four-channel HTc.SQUID system in a magnetically shielded room. By comparing the simulated results and experimental results, we verify the cardiac vector model and then do a preliminary study of the forward problem of MCG and ECG. Therefore, the results show that the vector model is reasonable in cardiac electrophysiology.
基金The work was supported by the National Basic Research Program of China (973 Program, No. 2004CB719504)
文摘The CuO-CeO2 catalyst prepared by chelating method has a superior catalytic performance for the preferential oxidation of CO in rich hydrogen, compared with the CuO-CeO2 catalyst prepared by coprecipitation method. The CO conversions over these catalysts, at 120 ℃ and 120000 ml/（g-h） in the absence of CO2 and H2O, are 99.6% and 88.6%, respectively, and the selectivity of O2 over these catalysts is very close （i.e. 51.3% and 55.8%, respectively）. The influence of certain factors such as hydrogen concentration, carbon monoxide concentration, H2O, O2/CO ratios, and space velocity on the catalytic performance of CuO-CeO2 catalyst prepared by chelating method is also studied. The results show that the addition of hydrogen and H2O has a negative effect on the catalytic performance of CuO-CeO2 catalyst, however, the variation of space velocity and the O2/CO ratio causes a comparatively slight influence.
文摘A novel, high-temperature, mechano-chemical（HTMC） method was developed to synthesise singlephase Sr_2CeO_4：Eu^（3＋）phosphor. Phosphors were characterised by X-ray diffraction（XRD）, scanning electron microscopy（SEM）, and luminescence spectra. Compared with phosphors prepared by the traditional hightemperature solid state method and citric acid gel method, single-phase Sr_2CeO_4：Eu^（3＋）powders by using the HTMC method, with small average particle sizes of about 5 μm, a narrow size distribution range and uniform dispersion, were prepared at 800 ℃, and reached their maximum luminescent intensity at 900 ℃.Under ultraviolet excitation at 298 nm, the sample showed good luminescence with the strongest red light of 616 nm. However, Sr_2CeO_4：Eu^（3＋）was prepared at the higher temperature of 1100 ℃ by solid state method and citric acid gel method. The particle size was too large and uneven with phosphor agglomeration by high-temperature solid state method. The luminescent intensity reached a maximum for Sr_2CeO_4：Eu^（3＋）phosphor at a synthesis temperature of 1100 ℃ by using the high-temperature solid state method, and at 1200 ℃ by both citric acid gel and chemical precipitation methods. Furthermore, the advantages of the Sr_2CeO_4：Eu^（3＋）powder prepared by HTMC method were discussed compared with that prepared using traditional high-temperature solid state and citric acid gel methods.
基金supported by Scientific Research Fund of Sichuan Provincial Education Department (09ZB102)Scientific Research Fund of Science and Technology Deportment of Sichuan Provincial (2011JYZ011)
文摘In this article, we introduce a hybrid iterative scheme for finding a common element of the set of solutions for a generalized equilibrium problems, the set of common fixed point for a family of infinite k-strict pseudo-contractive mappings, and the set of solutions of the variational inclusion problem with multi-valued maximal monotone mappings and inverse-strongly monotone mappings in Hilbert space. Under suitable conditions, some strong convergence theorems are proved. Our results extends the recent results in G.L.Acedo and H.K.Xu [2], Zhang, Lee and Chan [8], Wakahashi and Toyoda [9], Takahashi and Takahashi [I0] and S. S. Chang, H. W. Joseph Lee and C. K. Chan [II], S.Takahashi and W.Takahashi [12]. Moreover, the method of proof adopted in this article is different from those of [4] and [12].
基金Project supported by the National Natural Science Foundation of China(51102073)the Natural Science Foundation of Education Department of Anhui Province of China(KJ2015A232,KJ2015B1105906)+3 种基金the Natural Science Foundation of Anhui Province of China(1308085QB35)the research fund of State Key Laboratory of Structural Chemistry(20110012)Anhui Province Outstanding Young Teachers Visit Abroad Training Projects(gxfxZD2016220)the Outstanding Young Talent Project in Colleges and Universities of Anhui Province
文摘Mn-Zn ferrites doped with different contents of Sm^（3＋） and Gd^（3＋） ions were prepared by sol-gel auto-combustion method and characterized by Fourier transform infrared spectroscopy（FTIR）, thermogravimetric analysis（TG）, X-ray diffraction（XRD）, scanning electron microscopy（SEM） and vibrating sample magnetometer（VSM）. When samples were calcined in a relatively low temperature below 1100 °C, secondary phases（α-Fe_2O_3） could be identified. Therefore, in order to acquire pure and better crystallinity, the suitable calcining temperature of powders was selected at 1200 °C. It was also found that all the samples consisting of ferrite phases of typical spinel cubic structure and average crystallite sizes between 31.5 and 38.2 nm were obtained after calcining at 1200 oC for 4 h. The lattice parameters increased almost linearly with increasing Sm content. A dense microstructure was obtained after sintering at 1250 °C for 4 h. Through the analysis of magnetic properties, hysteresis loops for all the samples were narrow with low values of coercivity and retentivity, indicating the paramagnetic nature of these samples. And saturation magnetization Ms strongly depended on the type of additive to reach a maximum of 47.99 emu/g for x=0.015, which showed a great promise for hyperthermia applications.
文摘Nanocrystalline ZnO thin films have been fabricated by a multi-step solgel method using spin coating technique. Zinc acetate dihydrate, 2-methoxyethanol and monoethanolamine were used as a starting material, solvent and stabilizer, respectively. X-Ray Diffraction (XRD) and Scanning Electron Microscopy (SEM) were employed to characterize structure and morphologies of the as-deposited samples. The results of XRD and SEM showed that the heat treatment conditions, final rotational (spinning) speed, fume exhaust and precise control of concentration of reactants (precursor and solvent used) strongly affect the crystallographic orientation and morphology of the resultant ZnO films. The XRD pattern showed that the ZnO films formed the preferred orientation along c-axis and the grain size is 16nm for the samples. Only one peak corresponding to the (002) plane at 2θ = 34.34 appears on the diffractograms. The as-deposited films had a transparency of greater than 80% in the visible-near IR region from 400 nm - 800 nm. The optical band gap energy and thickness were calculated to be 3.296 eV and 266 nm respectively.
文摘The combustion characteristics of biomass, anthracite coal and their blends were investigated using thermogravimetry, and the kinetic parameters and combustion reaction mechanisms were tested by combining the iso-conversional method and Avrami method in order to find out the kinetics characteristics responsible for the combustion of samples. In biomass combustion, two peaks were observed at 332.3 and 472.3℃, but the reactive rate curve of coal showed one peak with maximum mass loss rate at 552.8℃. The ignition temperature and burnout temperature of blends decreased, and the ignition index and combustibility index increased with the increase in biomass content. Calculation of kinetic parameters showed that the values of activation energy of blends increased with increasing biomass content from 150.77 to 215.93 kJ/mol. The reaction orders of blends lay in the range of 0.44 and 0.78.
基金Funded by the 973 Project (No. 2009CB939704)the Program for Changjiang Scholars and Innovative Research Team in University (No.IRT0547)
文摘Copper indium disulfide（CuInS2） nano-particles were synthesized by solvothermal method at 150 ℃ using copper（？） chloride,indium（Ш） chloride,thiourea and ethanol as raw materials,and characterized by X-ray diffraction（XRD）,field-emission scanning electron microscope（FESEM）,and UV-Vis spectra.The effects of pH value on its micro-structures and optical properties were investigated.The results show that,with the pH value increasing,the particle size of the nano-crystalline CuInS2 increases,and its band gap becomes narrower under alkaline condition.The band gaps of CuInS2 nano-particles are from 1.52 eV to 1.93 eV,which makes them promising candidates as absorber materials for photovoltaic applications.
文摘This paper obtains a strong convergence theorem for k-strictly pseudo-contractive mapping under the framework of Hilbert spaces using CQ method. Due to the fact that non-expansive mapping is only O-strictly pseudo-contractive, the main result obtained in this paper extends the corresponding main result of Nakajo-Takahashi from non-expansive mapping to k-strictly pseudo-contractive one, where k∈ [0,1）.
基金Foundation item:the National Natural Science Foundation of China(No.51621096)
文摘The microbially cemented sand(MCS)material is a new building material with a broad research prospect,although the nationwide cold wave affects the mechanical properties of the material in the practical application.The microstructure of MCS is obtained by computed tomography(CT)and scanning electron microscope(SEM);the thermodynamic mathematical model is established by considering the particle shapes and bonding state based on direct element method(DEM).By studying the damage of temperature drop amplitude and cooling duration to MCS material under the effect of cold wave,the following conclusions are drawn.For a given temperature drop range,an increased cooling time can aggravate the material damage.In addition,a rapid drop in temperature can cause serious damage to the material.The cracks generated by the temperature stress propagate in the direction of the weaker component of the material.The DEM model can be better used to analyze the damage of the MCS structure induced by cold wave.
文摘This paper proposes a new hybrid variant of extragradient methods for finding a common solution of an equilibrium problem and a family of strict pseudo-contraction mappings. We present an algorithmic scheme that combine the idea of an extragradient method and a successive iteration method as a hybrid variant. Then, this algorithm is modified by projecting on a suitable convex set to get a better convergence property. The convergence of two these algorithms are investigated under certain assumptions.
