The recycling of spent batteries has become increasingly important owing to their wide applications,abundant raw material supply,and sustainable development.Compared with the degraded cathode,spent anode graphite ofte...The recycling of spent batteries has become increasingly important owing to their wide applications,abundant raw material supply,and sustainable development.Compared with the degraded cathode,spent anode graphite often has a relatively intact structure with few defects after long cycling.Yet,most spent graphite is simply burned or discarded due to its limited value and inferior performance on using conventional recycling methods that are complex,have low efficiency,and fail in performance restoration.Herein,we propose a fast,efficient,and“intelligent”strategy to regenerate and upcycle spent graphite based on defect‐driven targeted remediation.Using Sn as a nanoscale healant,we used rapid heating(~50 ms)to enable dynamic Sn droplets to automatically nucleate around the surface defects on the graphite upon cooling owing to strong binding to the defects(~5.84 eV/atom),thus simultaneously achieving Sn dispersion and graphite remediation.As a result,the regenerated graphite showed enhanced capacity and cycle stability(458.9 mAh g^(−1) at 0.2 A g^(−1) after 100 cycles),superior to those of commercial graphite.Benefiting from the self‐adaption of Sn dispersion,spent graphite with different degrees of defects can be regenerated to similar structures and performance.EverBatt analysis indicates that targeted regeneration and upcycling have significantly lower energy consumption(~99%reduction)and near‐zero CO_(2) emission,and yield much higher profit than hydrometallurgy,which opens a new avenue for direct upcycling of spend graphite in an efficient,green,and profitable manner for sustainable battery manufacture.展开更多
The synthesis of carbide coatings on graphite substrates using molten salt synthesis(MSS),has garnered significant interest due to its cost-effective nature.This study investigates the reaction process and growth kine...The synthesis of carbide coatings on graphite substrates using molten salt synthesis(MSS),has garnered significant interest due to its cost-effective nature.This study investigates the reaction process and growth kinetics involved in MSS,shedding light on key aspects of the process.The involvement of Ti powder through liquid-phase mass transfer is revealed,where the diffusion distance and quantity of Ti powder play a crucial role in determining the reaction rate by influencing the C content gradient on both sides of the carbide.Furthermore,the growth kinetics of the carbide coating are predominantly governed by the diffusion behavior of C within the carbide layer,rather than the chemical reaction rate.To analyze the kinetics,the thickness of the carbide layer is measured with respect to heat treatment time and temperature,unveiling a parabolic relationship within the temperature range of 700-1300℃.The estimated activation energy for the reaction is determined to be 179283 J·mol^(-1).These findings offer valuable insights into the synthesis of carbide coatings via MSS,facilitating their optimization and enhancing our understanding of their growth mechanisms and properties for various applications.展开更多
This study presents the first stage of a multi-scale numerical framework designed to predict the non-linear constitutive behavior of metal-composite interfaces in titanium-graphite fiber metal laminates. Scanning elec...This study presents the first stage of a multi-scale numerical framework designed to predict the non-linear constitutive behavior of metal-composite interfaces in titanium-graphite fiber metal laminates. Scanning electron microscopy and x-ray diffraction techniques are used to characterize the baseline physical and chemical state of the interface. The physics of adhesion between the metal and polymer matrix composite components are then evaluated on the atomistic scale using molecular dynamics simulations. Interfacial mechanical properties are subsequently derived from these simulations using classical mechanics and thermodynamics. These molecular-level property predictions are used in a companion study to parameterize a continuum-level finite element model of the interface by means of a traction-separation constitutive law. Extension of the proposed approach to other dissimilar metal- or metal oxide-polymer interfaces is also discussed.展开更多
In order to obtain anatase TiO2/expanded graphite with high expansion volume, titania gel was introduced to expandable graphite surface by sol-gel process, and then the composite was expanded and calcined at high temp...In order to obtain anatase TiO2/expanded graphite with high expansion volume, titania gel was introduced to expandable graphite surface by sol-gel process, and then the composite was expanded and calcined at high tempera- ture. The samples were analysed by using scanning electron microscope （SEM）, X-ray diffraction（XRD）, energy disperse spectroscopy （EDS）, and differential scanning calorimetry （DSC）. The optimal conditions for preparation are as follows： the molar ratio of tetrabutyl orthotitanate to triethanolamine is 1 ： 0.4, and the calcination and expansion temperature is in the range of 650--750 ~C. Under such conditions, the expansion volume of composites could reach 98 mE/g, and the mass loss ratio is less than 5%. The analysis shows that lower temperature and smaller particle size of graphite are helpful to the formation of anatase-type of TiO2, but larger particle size will lead to lower mass loss ratio, and higher temperature and larger particle size will lead to higher expansion volume.展开更多
Cathode samples of nano-diamond by graphitization pretreatment with different temperatures were fabricated by electrophoresis, then the structures and morphologies of the cathode samples were characterized by scanning...Cathode samples of nano-diamond by graphitization pretreatment with different temperatures were fabricated by electrophoresis, then the structures and morphologies of the cathode samples were characterized by scanning electron microscope(SEM) and X-ray diffraction(XRD), and the field emission tests were conducted. The effects of graphitization pretreatment on the field emission characteristics of nano-diamond cathode surface on titanium substrate are studied. The results indicate that the surface morphologies of nano-diamond cathode samples after graphitization pretreatment change a lot, and the field emission characteristics in low-voltage area are improved obviously. However, in high-voltage area, the curve distortion happens, and it doesn't conform the mechanism of field emission characteristics.展开更多
Neutron tube is a kind of accelerator neutron source, which has been applied extensively. It is mainly composed of an ion source system, an accelerator system, and a target system. The target system is one of the most...Neutron tube is a kind of accelerator neutron source, which has been applied extensively. It is mainly composed of an ion source system, an accelerator system, and a target system. The target system is one of the most important parameters of the neutron tube and it impacts directly the yield, the lifetime, and the stability. By far the relation between the property of neutron tube and target thickness has not been studied drastically in the Institute of Radiation Technology of Northeast Normal University. High-quality titanium target should be produced in order to manufacture the neutron tube with intense yield, long lifetime and high stability. In our experiment, the pure titanium film was evaporated on the ceramic target by using the evaporation technique. The impact of the thickness of the titanium film on the yield of the neutron tube was studied, and the yield of the neutron tube was on optimistic state if the thickness of titanium film was 2.2 μm. The properties of training and stability of neutron tubes with different thick titanium film target were also present in this paper.展开更多
基金The Fundamental Research Funds for the Central Universities,HUST,Grant/Award Number:2021GCRC046The Open Fund of State Key Laboratory of New Textile Materials and Advanced Processing Technologies,Grant/Award Number:FZ2022005Natural Science Foundation of Hubei Province,China,Grant/Award Number:2022CFA031。
文摘The recycling of spent batteries has become increasingly important owing to their wide applications,abundant raw material supply,and sustainable development.Compared with the degraded cathode,spent anode graphite often has a relatively intact structure with few defects after long cycling.Yet,most spent graphite is simply burned or discarded due to its limited value and inferior performance on using conventional recycling methods that are complex,have low efficiency,and fail in performance restoration.Herein,we propose a fast,efficient,and“intelligent”strategy to regenerate and upcycle spent graphite based on defect‐driven targeted remediation.Using Sn as a nanoscale healant,we used rapid heating(~50 ms)to enable dynamic Sn droplets to automatically nucleate around the surface defects on the graphite upon cooling owing to strong binding to the defects(~5.84 eV/atom),thus simultaneously achieving Sn dispersion and graphite remediation.As a result,the regenerated graphite showed enhanced capacity and cycle stability(458.9 mAh g^(−1) at 0.2 A g^(−1) after 100 cycles),superior to those of commercial graphite.Benefiting from the self‐adaption of Sn dispersion,spent graphite with different degrees of defects can be regenerated to similar structures and performance.EverBatt analysis indicates that targeted regeneration and upcycling have significantly lower energy consumption(~99%reduction)and near‐zero CO_(2) emission,and yield much higher profit than hydrometallurgy,which opens a new avenue for direct upcycling of spend graphite in an efficient,green,and profitable manner for sustainable battery manufacture.
基金This work was financially supported by the National Natural Science Foundation of China(No.52171144)the Fundamental Research Special Zone Program of Shanghai Jiao Tong University(No.21TQ1400215).
文摘The synthesis of carbide coatings on graphite substrates using molten salt synthesis(MSS),has garnered significant interest due to its cost-effective nature.This study investigates the reaction process and growth kinetics involved in MSS,shedding light on key aspects of the process.The involvement of Ti powder through liquid-phase mass transfer is revealed,where the diffusion distance and quantity of Ti powder play a crucial role in determining the reaction rate by influencing the C content gradient on both sides of the carbide.Furthermore,the growth kinetics of the carbide coating are predominantly governed by the diffusion behavior of C within the carbide layer,rather than the chemical reaction rate.To analyze the kinetics,the thickness of the carbide layer is measured with respect to heat treatment time and temperature,unveiling a parabolic relationship within the temperature range of 700-1300℃.The estimated activation energy for the reaction is determined to be 179283 J·mol^(-1).These findings offer valuable insights into the synthesis of carbide coatings via MSS,facilitating their optimization and enhancing our understanding of their growth mechanisms and properties for various applications.
文摘This study presents the first stage of a multi-scale numerical framework designed to predict the non-linear constitutive behavior of metal-composite interfaces in titanium-graphite fiber metal laminates. Scanning electron microscopy and x-ray diffraction techniques are used to characterize the baseline physical and chemical state of the interface. The physics of adhesion between the metal and polymer matrix composite components are then evaluated on the atomistic scale using molecular dynamics simulations. Interfacial mechanical properties are subsequently derived from these simulations using classical mechanics and thermodynamics. These molecular-level property predictions are used in a companion study to parameterize a continuum-level finite element model of the interface by means of a traction-separation constitutive law. Extension of the proposed approach to other dissimilar metal- or metal oxide-polymer interfaces is also discussed.
基金Supported by Applied Basic Research Project of Sichuan Province (No.2006J13-014)Innovation Fund of Panzhihua University
文摘In order to obtain anatase TiO2/expanded graphite with high expansion volume, titania gel was introduced to expandable graphite surface by sol-gel process, and then the composite was expanded and calcined at high tempera- ture. The samples were analysed by using scanning electron microscope （SEM）, X-ray diffraction（XRD）, energy disperse spectroscopy （EDS）, and differential scanning calorimetry （DSC）. The optimal conditions for preparation are as follows： the molar ratio of tetrabutyl orthotitanate to triethanolamine is 1 ： 0.4, and the calcination and expansion temperature is in the range of 650--750 ~C. Under such conditions, the expansion volume of composites could reach 98 mE/g, and the mass loss ratio is less than 5%. The analysis shows that lower temperature and smaller particle size of graphite are helpful to the formation of anatase-type of TiO2, but larger particle size will lead to lower mass loss ratio, and higher temperature and larger particle size will lead to higher expansion volume.
基金supported by the PH.D Start-up Foundation of Yan’an University(No.YD 2010-04)the Special Foundation of Yan’an University(No.YDZD 2011-01)+3 种基金the 2014 Education and Innovation Project of Yan’an University for Graduate Studentthe 2014 Local University National Training Project of Innovation and Entrepreneurship for Undergraduates(No.201410719023)the Special Research Funds for Discipline Construction of High Level University Construction(No.2015SXTS02)the Natural Science Foundation of Shaanxi Province(No.2014JM2-5058)
文摘Cathode samples of nano-diamond by graphitization pretreatment with different temperatures were fabricated by electrophoresis, then the structures and morphologies of the cathode samples were characterized by scanning electron microscope(SEM) and X-ray diffraction(XRD), and the field emission tests were conducted. The effects of graphitization pretreatment on the field emission characteristics of nano-diamond cathode surface on titanium substrate are studied. The results indicate that the surface morphologies of nano-diamond cathode samples after graphitization pretreatment change a lot, and the field emission characteristics in low-voltage area are improved obviously. However, in high-voltage area, the curve distortion happens, and it doesn't conform the mechanism of field emission characteristics.
文摘Neutron tube is a kind of accelerator neutron source, which has been applied extensively. It is mainly composed of an ion source system, an accelerator system, and a target system. The target system is one of the most important parameters of the neutron tube and it impacts directly the yield, the lifetime, and the stability. By far the relation between the property of neutron tube and target thickness has not been studied drastically in the Institute of Radiation Technology of Northeast Normal University. High-quality titanium target should be produced in order to manufacture the neutron tube with intense yield, long lifetime and high stability. In our experiment, the pure titanium film was evaporated on the ceramic target by using the evaporation technique. The impact of the thickness of the titanium film on the yield of the neutron tube was studied, and the yield of the neutron tube was on optimistic state if the thickness of titanium film was 2.2 μm. The properties of training and stability of neutron tubes with different thick titanium film target were also present in this paper.
