Gradient magnetic heterointerfaces have injected infinite vitality in optimizing impedance matching,adjusting dielectric/magnetic resonance and promoting electromagnetic(EM)wave absorption,but still exist a significan...Gradient magnetic heterointerfaces have injected infinite vitality in optimizing impedance matching,adjusting dielectric/magnetic resonance and promoting electromagnetic(EM)wave absorption,but still exist a significant challenging in regulating local phase evolution.Herein,accordion-shaped Co/Co_(3)O_(4)@N-doped carbon nanosheets(Co/Co_(3)O_(4)@NC)with gradient magnetic heterointerfaces have been fabricated via the cooperative high-temperature carbonization and lowtemperature oxidation process.The results indicate that the surface epitaxial growth of crystal Co_(3)O_(4) domains on local Co nanoparticles realizes the adjustment of magnetic-heteroatomic components,which are beneficial for optimizing impedance matching and interfacial polarization.Moreover,gradient magnetic heterointerfaces simultaneously realize magnetic coupling,and long-range magnetic diffraction.Specifically,the synthesized Co/Co_(3)O_(4)@NC absorbents display the strong electromagnetic wave attenuation capability of−53.5 dB at a thickness of 3.0 mm with an effective absorption bandwidth of 5.36 GHz,both are superior to those of single magnetic domains embedded in carbon matrix.This design concept provides us an inspiration in optimizing interfacial polarization,regulating magnetic coupling and promoting electromagnetic wave absorption.展开更多
The 304 austenitic stainless steel was processed by high-pressure torsion(HPT)at room temperature with 10,20,and 30 rotations under a pressure of 3 GPa and a rotation speed of 1 r/min.The phase transformation and micr...The 304 austenitic stainless steel was processed by high-pressure torsion(HPT)at room temperature with 10,20,and 30 rotations under a pressure of 3 GPa and a rotation speed of 1 r/min.The phase transformation and microstructural evolution of 304 stainless steel after HPT were investigated by X-ray diffraction(XRD)analysis,electron backscatter diffraction(EBSD)analysis,transmission electron microscopy(TEM),nanoindentation test and differential scanning calorimetry(DSC)analysis.The experimental results show that HPT causes elongated nanocrystalline grains of 25 nm width along the torsion direction.After 10 turns of HPT,the deformation-induced martensitic transformation is completed and the hardness increases from 3 GPa to 8.5 GPa at the edge of the disc.However,a local reverse phase transformation from martensite to austenite is observed in the peripheral regions of the sample after 30 turns of HPT,leading to a higher volume fraction of austenite,and the hardness of the sample also decreases accordingly.展开更多
Coal and rock dynamic disasters are always major hidden dangers threatening mine safety production.Many researchers use cement concrete material as filling and energy-absorption materials.However,the current material ...Coal and rock dynamic disasters are always major hidden dangers threatening mine safety production.Many researchers use cement concrete material as filling and energy-absorption materials.However,the current material toughness is not sufficient to meet the requirements of mine disaster prevention.Based on this,in order to find the optimal-ratio material that combines strength and toughness,the synergistic mechanism of lithium slag(LS),ethylene-vinyl acetate(EVA)copolymer,and polyvinyl alcohol(PVA)fiber mixtures in improving the mechanical properties of cement concrete,as well as the mechanism of microscopic phase evolution,was analyzed through macroscopic experiments,mesoscopic characterization,microscopic analysis,theoretical calculations,and comprehensive evaluation.The stress-strain curves obtained from the uniaxial compressive strength tests of specimens with different admixtures and fibers were investigated,and the characteristics of different stages were analyzed.The mechanical properties of different admixtures and fiber-reinforced materials,including their advantages and disadvantages,were compared through weighted comprehensive evaluation.The entire process of material failure,ranging from pore compaction,crack initiation,crack propagation,specimen instability to crack penetration,was explained via macroscopic fracture morphology,and the mechanical mechanism of how different admixtures affect the mechanical properties of concrete materials was revealed.The microscopic mechanism and the phase-evolution process of how the admixture affects concrete properties were elucidated using X-ray diffraction(XRD),hydration reaction theory,and Fourier transform infrared spectroscopy(FTIR).Furthermore,scanning electron microscopy-energy dispersive spectroscopy(SEM-EDS)was used to reveal the interfacial pore state and element distribution of the internal microstructure of concrete.The results show that PVA fiber bars can play the role of a“skeleton bridge”to improve the toughness of materials.LS can effectively promote the hydration process and cooperate with PVA fiber bars to enhance the mechanical properties of the material.EVA will inhibit the hydration reaction and degrade the material’s mechanical properties through the“organic isolation”effect.In addition,the on-site application has proven that the R3-group materials in this study can effectively inhibit the deformation of the roadway and possess strong reliability.Finally,the advantages and feasibility of LS-and-fiber-reinforced concrete were discussed from four perspectives:environmental protection,economy,disaster prevention,and development.This paper is expected to provide technical reference for the large-scale disposal of solid waste LS,the performance-optimization direction of concrete materials,and the prevention and control of coal and rock dynamic disasters.展开更多
The toughness of thermoplastic polymers such as polypropylene(PP)can be improved by adding elastomers-based toughening agents,and the phase morphology of these toughening agents is very important for the strength and ...The toughness of thermoplastic polymers such as polypropylene(PP)can be improved by adding elastomers-based toughening agents,and the phase morphology of these toughening agents is very important for the strength and toughness of PP.The low-temperature toughness of PP was improved by inserting high-density polyethylene(HDPE)between PP and polystyrene-b-ethylene-co-propyleneb-polystyrene(SEPS)to form an unusual SEPS@HDPE core–shell structure,with SEPS as the core and HDPE as the shell.Based on the microtopography and rheological behavior characterization,HDPE in PP/SEPS/HDPE composites was found to serve as an emulsifier,decrease the size of SEPS particles,and promote the homogeneous dispersion of dispersed phase particles in the matrix.An increase in the HDPE content shifted the toughening mechanism of PP composites from cavitation to matrix shear yielding.The reduction in the distance between the dispersed core–shell structure particles promoted shear yielding in the PP composites,leading to increased toughness.The creation of an intermediate HDPE layer with a moderate modulus was crucial for dispersing stress concentrations and significantly improving toughness without compromising the tensile strength.These findings will facilitate the fabrication of high-toughness PP products at low temperatures.展开更多
Exploring efficient transition-metal-based electrocatalysts is critical for the wide application of electrochemical hydrogen generation technology.Although the phase displays prominent influence on their performance,i...Exploring efficient transition-metal-based electrocatalysts is critical for the wide application of electrochemical hydrogen generation technology.Although the phase displays prominent influence on their performance,it remains a major challenge to achieve phase regulation in the same synthesis method and elucidate the intrinsic relationship between the phase and activity.Herein,we developed a sulfur induced electrodeposition strategy to achieve the precise phase regulation of nickel-based materials from Ni(OH)_(2)to Ni and Ni_(3)S_(2).S atoms can be introduced into Ni and Ni(OH)_(2)due to sulfur inducement,and the S proportion is finely controlled via changing the deposition parameters.Importantly,the obtained S-Ni catalyst displays enhanced hydrogen evolution activity with an ultralow overpotential of 27 mV at 10 mA cm^(-2),which is superior to the S-Ni(OH)_(2),Ni_(3)S_(2),and even Pt/C.Density functional theory(DFT)calculations disclose the S-Ni catalyst exhibits optimal charge state and local coordination,remarkably optimizing the water adsorption and Ni-H^(*)binding energy.This work provides new insights into phase regulation in electrodeposition and an understanding of the intrinsic relationship between phase and activity.展开更多
The remarkable power of chemistry over description and trans-formation of matters has been significantly enhanced through the development of dynamic chemistry and condensed matter chemistry[1].This progress has furthe...The remarkable power of chemistry over description and trans-formation of matters has been significantly enhanced through the development of dynamic chemistry and condensed matter chemistry[1].This progress has further elevated chemistry to a creative science and a thriving industry.The development of dynamic chemistry,span-ning from supramolecular chemistry to constitutional dynamic chem-istry,has witnessed significant advancements towards adaptive chemistry,which is characterized primarily by its self-adaption to external stimuli.This is particularly achieved in two-or three-dimensional dynamic frameworks.Meanwhile,the multi-phase evolution resulting from the emerging of solid-to-liquid transition plat-form is assuming an increasingly crucial role in condensed matter chemistry[2].展开更多
The evolution of the 3D Fe-rich phases of Al-7.0Si-1.2Fe alloys with different Mn contents was visualized and characterized using synchrotron X-ray computed tomography,and the effect of Fe-rich phases with typical mor...The evolution of the 3D Fe-rich phases of Al-7.0Si-1.2Fe alloys with different Mn contents was visualized and characterized using synchrotron X-ray computed tomography,and the effect of Fe-rich phases with typical morphologies on the fracture behavior during tensile testing was analyzed.The results showed that the Fe-rich phase changed from platelet-likeβ-Al_(5) Fe Si intoα-Al_(15)(Fe Mn)_(3)Si_(2)with various morphologies after the addition of Mn.The Mn addition not only significantly reduced the volume fraction,equivalent diameter and interconnectivity of the Fe-rich phase but also greatly increased the sphericity,surface thickness,and distribution of the mean curvature and surface thickness.Furthermore,the equivalent diameter ofα-Al_(15)(FeMn)_(3)Si_(2)had an inverse exponential function relationship with its sphericity.The 3D morphology ofα-Al_(15)(FeMn)_(3)Si_(2)can be summarized as massive and regular polyhedrons,hollow and regular polyhedrons,and multibranched polyhedrons.The fraction of the different 3D morphologies in each alloy is related to the Mn content,where excess Mn increased the number and volume fraction of the large Fe-rich particles with a low sphericity.The ductility of each alloy was significantly improved by the addition of Mn but gradually decreased when the Mn/Fe ratio exceeded 1.2.The increase in largeα-Al_(15)(Mn Fe)_(3)Si_(2)with a low sphericity was the main reason for the decreased ductility of alloys with a high Mn content.展开更多
The morphological evolution of Fe-rich phases in the Alalloy has been investigated with various contents of Fe,Mn,and Cr.The results show that coarse Chinese script Fe-rich phases appear in the alloy with 0.6 wt%Fe co...The morphological evolution of Fe-rich phases in the Alalloy has been investigated with various contents of Fe,Mn,and Cr.The results show that coarse Chinese script Fe-rich phases appear in the alloy with 0.6 wt%Fe combined with trace Mn,while the blocky Fe-rich phases appear combined with trace Cr.Under the coexistence of trace Mn and Cr,a large number of fine Chinese script Fe-rich phases could be visible in the low iron-bearing AlSi_9Cu_3-alloy（0.60 wt%）.At high Fe level（1.30 wt%）,numerous Fe-rich phases with hexagonal morphologies are observed with the trace Cr,while fish-bone and pentagonal morphologies of Fe-rich phases could be simultaneously observed with the addition of both Mn and Cr.The results reveal that the trace Mn and Cr promote the morphological evolution of Fe-rich phases.The morphology evolution mechanism of Fe-rich phases has been discussed by using the atom radius and electronegativity differences of Fe,Mn,and Cr.展开更多
Commercial nanosized alumina and titania particles were selected as raw materials to prepare the blended slurry with composition of A1203-13%TiO2 （mass fraction）, which were reconstituted into micrometer-sized granu...Commercial nanosized alumina and titania particles were selected as raw materials to prepare the blended slurry with composition of A1203-13%TiO2 （mass fraction）, which were reconstituted into micrometer-sized granules by spray drying, subsequently sintering at different temperatures to form nanostructured feedstock for thermal spraying, and then A1203-13%TiO2 nanocoatings were deposited by plasma spraying. The evolution of morphology, microstructure, and phase transformation of the agglomerated powder and as-sprayed coatings were characterized by X-ray diffraction （XRD） and scanning electron microscopy （SEM）. The results show that A1203 retains the same a phase as the raw material during sintering, while TiO2 changes from anatase to futile. During plasma spraying, some a-A1203 phases solidify to form metastable y-A1203, and the volume fraction of a-A1203 decreases as CPSP increases. However, peaks of the TiO2 phase are not observed from the as-sprayed coatings except for the coatings sprayed at the lower CPSP. As the CPSP increases, nanostructured TiO2 is dissolved easily in y-A1203 or z-A1203＇TiO2 phase. After heat treatment, y-A1203 in the coatings transforms to a-A1203, and rutile is precipitated.展开更多
The microstructural evolution and phase transformations during partial remelting of in-situ Mg2Sip/AM60B composite modified by SiC and Sr were investigated. The results indicate that SiC and Sr are effective for refi...The microstructural evolution and phase transformations during partial remelting of in-situ Mg2Sip/AM60B composite modified by SiC and Sr were investigated. The results indicate that SiC and Sr are effective for refining primary α-Mg grains and Mg2Si particles. After being partially remelted, a semisolid microstructure with small and spheroidal primary α-Mg particles can be obtained. The microstructural evolution during partial remelting can be divided into four stages： the initial rapid coarsening, structural separation, spheroidization and final coarsening, which are essentially caused by the phase transformations of β→α, α＋β→L and α→L, α→L, and α→L and L→α, respectively. The Mg2Si particles have not obvious effect on the general microstructural evolution steps, but can slower the evolution progress and change the coarsening mechanism. During partial remelting, Mg2Si particles first become blunt and then become spheroidal because of melting of their edges and corners, and finally are coarsened owing to Ostwald ripening.展开更多
Studies of lithology, sedimentary facies and the distribution regularity of SiO2 and Al2O3 contents and Al2O3/SiO2 ratio allow us to divide the Upper Pleistocene-Holocene Series represented by the MUanggouwan section ...Studies of lithology, sedimentary facies and the distribution regularity of SiO2 and Al2O3 contents and Al2O3/SiO2 ratio allow us to divide the Upper Pleistocene-Holocene Series represented by the MUanggouwan section in China＇s Salawnsu River valley into six segments： MGS1, MGS2, MGS3, MGS4, MGS5 and MGS6. The boundary ages for MGS1 （the Dishaogouwan and Dagouwan Formations）, MGS2 （the upper Chengchuan Formation）, MGS3 （the middle Chengchuan Formation）, MGS4 （the lower Chengchuan Formation）, MGS5 （most strata of the Salawusu Formation） and MGS6 （the bottom of the Salawusu Formation and the top of the Lishi Formation） correspond to those of MIS1, MIS2, MIS3, MIS4, MISS and MIS6, respectively, from deep sea sediments or continental glaciers. MGS5 can be subdivided into five subsegments （MGS5a, MGS5b, MGS5c, MGS5d and MGS5e） and the boundary ages of these subsegments correspond to those of MISSa, MISSb, MIS5c, MIS5d and MIS5e, respectively. Based on the paleoenvironment and paleoecology indicated by the primary chemical elements, fossil vertebrates, mollusks and pollen grains, we hypothesize that MGS1, MGS2, MGS3, MGS4, MGS5 and MGS6 and the subsegments of MGS5 match the corresponding stages for oxygen isotopes in the deep sea sediments and continental glaciers, and the substages of MIS5 in terms of climatic characters, further explaining the phenomena that determined the formation of the late Quaternary strata and the paleontology of the Salawusu River valley. These phenomena relate to fluctuations in the global climate （and particularly in the East Asian monsoon） during the glacial and interglacial periods.展开更多
The Sinian-Lower Paleozoic （also called the lower association） in Sichuan （四川） basin has undergone geologic evolution for several hundred million years. The subsidence history of the Sinian-Lower Paleozoic can b...The Sinian-Lower Paleozoic （also called the lower association） in Sichuan （四川） basin has undergone geologic evolution for several hundred million years. The subsidence history of the Sinian-Lower Paleozoic can be divided into four stages： the stable subsidence during Cambrian and Silurian; the uplift and denudation during Devonian and Carboniferous; the subsidence （main process） during Permian to Late Cretaceous; and the rapid uplift and denudation since Late Cretaceous. The later two stages could be regarded as critical factors for the development of oil and gas in the lower association. The evolution of energy field such as temperature, pressure, and hydrocarbon phase in the lower association during the deep burial and uplift in the third stage might be induced as follows： （1） super-high pressure was developed during oil-cracking, previous super-high pressure was sustained, or changed as normal pressure during late uplift; （2） temperature increased with deep burial during persistent subsidence and decreased during uplift in late stage; （3） as a response to the change of the energy field, hydrocarbon phase experienced a series of changes such as organic material （solid）, oil （liquid）, oil-cracking gas （gaseous） ＋ bitumen （solid） ＋ abnormal high pressure, gas cap gas with super-high pressure （gaseous） ＋ bitumen （solid） ＋ water soluble gas （liquid）, and gas in pool （gaseous） ＋ water soluble gas （liquid） ＋ bitumen （solid）. The restoration of hydrocarbon phase evolution is of important value for the exploration of natural gas in the Sinian-Lower Paleozoic in Sichuan basin.展开更多
The effects of solution treatment on the evolution of the second phases and mechanical properties of7075Al alloy werestudied with scanning electron microscopy(SEM),energy dispersive X-ray spectrometry(EDS),differentia...The effects of solution treatment on the evolution of the second phases and mechanical properties of7075Al alloy werestudied with scanning electron microscopy(SEM),energy dispersive X-ray spectrometry(EDS),differential scanning calorimetry(DSC),hardness and tensile tests.The results show that Mg(Zn,Cu,Al)2phases gradually dissolve into the matrix,yet the size andmorphology of Al7Cu2Fe phase exhibit no change with the increase of the solution treatment temperature and time due to its highmelting point.When the solution treatment temperature and time continue to increase,the formation of coarse black Mg2Si particlesoccurs.Compared to the as-cast alloy,the microhardness,tensile strength,and elongation of the sample under solution heat treatmentat460°C for5h are increased by55.1%,40.9%and109.1%,respectively.This is because the eutectic Mg(Zn,Cu,Al)2phases almostcompletely dissolve and basically no coarse black Mg2Si particles are formed.展开更多
Quantitative parameters of bed combustion, including the thickness of the combustion zone(TCZ), the maximum temperature of the combustion zone(MTCZ), and the bed shrinkage, were characterized through a series of sinte...Quantitative parameters of bed combustion, including the thickness of the combustion zone(TCZ), the maximum temperature of the combustion zone(MTCZ), and the bed shrinkage, were characterized through a series of sinter pot tests in transparent quartz pots. The results showed that TCZ first ascended and then descended as the sintering process proceeded. The sintering process was divided into four stages according to the variation rate of the TCZ. A "relative-coordinate" method was developed to obtain the actual reaction temperature of sinter along the height direction. With increasing the sintering temperature, the reactants transformed and entered into liquid phases. The mineral composition and microstructure of the sinter were characterized through X-ray diffraction and scanning electron microscopy–energy-dispersive X-ray spectroscopy. Liquid phases with greater Fe and Al contents were more likely to form acicular-like silico-ferrite of calcium and aluminum after crystallization because of the outward spread of Al, which led to a better fluidity of the liquid. An evolution mechanism of "solid-state reaction—liquid phases formation—crystallization" of the mineral phases is proposed.展开更多
The microstructure evolution law and the structure of precipitates produced during the tempering of steel AerMet100 based on TEM observation and the calibration of diffraction spot were revealed.The electronic structu...The microstructure evolution law and the structure of precipitates produced during the tempering of steel AerMet100 based on TEM observation and the calibration of diffraction spot were revealed.The electronic structure and the stability of the MoxCr2-xC phase were calculated using the plane-wave pseudo-potential method on basis of density functional theory.TEM observations show that the precipitation phases Fe3C and Fe2-xCx(x=0.05～0.14) between martensite lath are produced at 425 and 480 ℃,respectively.The increase of tempering temperature or time can lead to the redissolution of both phases Fe3C and Fe2-xCx,and also lead to the precipitation of the phase Cr2C in martensite lath.The calculation results of formation energies and the density of state(DOS) demonstrate that in point of MoxCr2-xC structures formed during tempering,the early precipitation phase is Cr2C and finally later evolves into Mo2C phase with diffusing of incorporation of Mo atom into the Cr2C crystal cell,lattice,which can results in a energy decreases of the structure MoxCr2-xC phase with the increase of x.展开更多
This paper examines the effect of Fe addition on the microstructure characterized by scanning electron microscopy/electron backscattered diffraction,neutron diffraction,and synchrotron X-ray tomography and the mechani...This paper examines the effect of Fe addition on the microstructure characterized by scanning electron microscopy/electron backscattered diffraction,neutron diffraction,and synchrotron X-ray tomography and the mechanical properties of Al-Mg-Mn-Fe-Cu alloys.The findings reveal that the microstructures of the alloys consisted of an Al matrix,Al_(6)(FeMn),and Al_(2)CuMg phase particles.The addition of Fe significantly increased the yield strength(YS),and ultimate tensile strength(UTS)of the alloys,while reducing elongation.The transformation of the 3D morphology of the Al_(6)(FeMn)phase from separated and fine particles with Chinese-script morphology to interconnected rod-like structure as Fe content increased from 0.1%to 0.8%.This strengthening effect was attributed to the slip lines being blocked at the vicinity of the inter-connected Fe-rich phase,leading to grain rotation and dislocation density increment around the Fe-rich phase,ultimately improving the strength of the alloys.However,the Fe-rich phases and Al_(2)CuMg phases were found to be prone to cracking under tensile stress,resulting in decreased elongation of the alloys.This study provides a potential application in the design and manufacturing of new non-heat-treatable Al alloys for the automotive industry.展开更多
The effect of the melt holding temperature on the morphological evolution and sedimentation behavior of iron-rich intermetallics in Al-7.0 Si-1.0 Fe-1.2 Mn-0.25 Mg alloy was investigated using an optical microscope,sc...The effect of the melt holding temperature on the morphological evolution and sedimentation behavior of iron-rich intermetallics in Al-7.0 Si-1.0 Fe-1.2 Mn-0.25 Mg alloy was investigated using an optical microscope,scanning electron microscope and differential thermal analyzer.The results show that as the holding temperature decreases,the morphologies of the primary iron-rich phase in matrix change from star-like to polygonal,and the number of the primary phases gradually decreases and disappears at 615°C.Finally,the Chinese script phases with small size,high compact and uniform distribution are obtained.In contrast,the primary iron-rich phases in slag transform into a coarser polygonal shape with lower roundness,and some of them have hollow structures.Furthermore,the area fraction of intermetallics and Fe content in the matrix decrease gradually due to the formation and growth of sludge and subsequent natural sedimentation during melt holding.With the decrease of holding temperature,the main factors hindering the settlement of the primary phases are morphology,size,and density in turn.展开更多
Molybdenum carbide(MoxC)with variable phase structure possesses flexible hydrogen-binding energy(HBE),which is a promising hydrogen evolution reaction(HER)catalyst.Herein,a hybrid multiphase MoxC freestanding film cou...Molybdenum carbide(MoxC)with variable phase structure possesses flexible hydrogen-binding energy(HBE),which is a promising hydrogen evolution reaction(HER)catalyst.Herein,a hybrid multiphase MoxC freestanding film coupled with Co3Mo(CM/MoxC@NC)is synthesized through the electrospinning method supplemented by the heteroatom incorporation.CM/MoxC@NC surpasses its pure phase counterparts and exhibits remarkable catalytic activity at 114mV to deliver a current density of 10mA cm^(−2) in acid,which is among the first-rate level performance reported for MoxC-based catalysts.The subsequent ex situ and in situ characterizations reveal a phase transition mechanism based on self-catalysis that CoOx depletes the coordinated C ofα-MoC via the interaction,which realizes the assembly of weak HBEα-MoC and strong HBEβ-Mo2C,and the enhanced utilization of active materials as well.The multiple structures with optimal HBE are in favor of the stepwise reactions of HER,as the study of the correlation between HBE and phase structure revealed.This study discloses the underlying phase transition mechanism and highlights the HBE–structure relationship that should be considered for catalyst design.展开更多
To make the ferroelectric BaTiO3 possess ferromagnetism simultaneously,magnetic Fe was doped into BaTiO3 ceramics at doping levels up to 10%(molar fraction).Both tetragonal and hexagonal phases coexisted in the Fe-dop...To make the ferroelectric BaTiO3 possess ferromagnetism simultaneously,magnetic Fe was doped into BaTiO3 ceramics at doping levels up to 10%(molar fraction).Both tetragonal and hexagonal phases coexisted in the Fe-doped BaTiO3 ceramics except at 1% doping level.X-ray diffraction analysis indicated that higher doping level of Fe,higher sintering temperature and longer sintering time promoted the formation of hexagonal phases in Fe-doped BaTiO3 ceramics.Ferroelectricity was observed in all samples at room temperature,but it was greatly depressed by Fe doping.Except at doping level of 1%,room-temperature ferromagnetism was observed in the BaTiO3 ceramics.The dependence of the saturation magnetization and coercivities of the Fe-doped BaTiO3 ceramics on doping level was systematically studied.Both the saturation magnetization and magnetic coercivities were found to be dependent on the doping level as well as the fraction of the hexagonal phase in the ceramics.展开更多
The effect of temperature variation owing to the cooling pattern （CP） on the microstructural evolution was investigated by establishing a thermomechanical coupled FE （finite element） model. A set of constitutive e...The effect of temperature variation owing to the cooling pattern （CP） on the microstructural evolution was investigated by establishing a thermomechanical coupled FE （finite element） model. A set of constitutive equations of phase transformation was implanted into the commercial FE solver MARC through the user defined subroutine CR- PLAW, and the temperature field was calculated by another user defined subroutine FILM. The results show that the final mierostructure is completely bainite phase for CP one, 98% of bainite phase and 2% of ferrite phase for CP two, and 55% of bainite phase, 35% of pearlite phase and 10% of ferrite phase for CP three.展开更多
基金financially supported by the National Natural Science Foundation of China(52373271)Science,Technology and Innovation Commission of Shenzhen Municipality under Grant(KCXFZ20201221173004012)+1 种基金National Key Research and Development Program of Shaanxi Province(No.2023-YBNY-271)Open Testing Foundation of the Analytical&Testing Center of Northwestern Polytechnical University(2023T019).
文摘Gradient magnetic heterointerfaces have injected infinite vitality in optimizing impedance matching,adjusting dielectric/magnetic resonance and promoting electromagnetic(EM)wave absorption,but still exist a significant challenging in regulating local phase evolution.Herein,accordion-shaped Co/Co_(3)O_(4)@N-doped carbon nanosheets(Co/Co_(3)O_(4)@NC)with gradient magnetic heterointerfaces have been fabricated via the cooperative high-temperature carbonization and lowtemperature oxidation process.The results indicate that the surface epitaxial growth of crystal Co_(3)O_(4) domains on local Co nanoparticles realizes the adjustment of magnetic-heteroatomic components,which are beneficial for optimizing impedance matching and interfacial polarization.Moreover,gradient magnetic heterointerfaces simultaneously realize magnetic coupling,and long-range magnetic diffraction.Specifically,the synthesized Co/Co_(3)O_(4)@NC absorbents display the strong electromagnetic wave attenuation capability of−53.5 dB at a thickness of 3.0 mm with an effective absorption bandwidth of 5.36 GHz,both are superior to those of single magnetic domains embedded in carbon matrix.This design concept provides us an inspiration in optimizing interfacial polarization,regulating magnetic coupling and promoting electromagnetic wave absorption.
基金Funded by the National Natural Science Foundation of China(No.51905215)the Postgraduate Research&Practice Innovation Program of Jiangsu Province(No.SJCX231233)。
文摘The 304 austenitic stainless steel was processed by high-pressure torsion(HPT)at room temperature with 10,20,and 30 rotations under a pressure of 3 GPa and a rotation speed of 1 r/min.The phase transformation and microstructural evolution of 304 stainless steel after HPT were investigated by X-ray diffraction(XRD)analysis,electron backscatter diffraction(EBSD)analysis,transmission electron microscopy(TEM),nanoindentation test and differential scanning calorimetry(DSC)analysis.The experimental results show that HPT causes elongated nanocrystalline grains of 25 nm width along the torsion direction.After 10 turns of HPT,the deformation-induced martensitic transformation is completed and the hardness increases from 3 GPa to 8.5 GPa at the edge of the disc.However,a local reverse phase transformation from martensite to austenite is observed in the peripheral regions of the sample after 30 turns of HPT,leading to a higher volume fraction of austenite,and the hardness of the sample also decreases accordingly.
基金supported by the National Natural Science Foundation of China(Nos.U23B2093 and 52034009)the National Key R&D Program of China(No.2024YFC3013801)the Fundamental Research Funds for the Central Universities(Ph.D.Top Innovative Talents Fund of CUMTB)(No.BBJ2025001).
文摘Coal and rock dynamic disasters are always major hidden dangers threatening mine safety production.Many researchers use cement concrete material as filling and energy-absorption materials.However,the current material toughness is not sufficient to meet the requirements of mine disaster prevention.Based on this,in order to find the optimal-ratio material that combines strength and toughness,the synergistic mechanism of lithium slag(LS),ethylene-vinyl acetate(EVA)copolymer,and polyvinyl alcohol(PVA)fiber mixtures in improving the mechanical properties of cement concrete,as well as the mechanism of microscopic phase evolution,was analyzed through macroscopic experiments,mesoscopic characterization,microscopic analysis,theoretical calculations,and comprehensive evaluation.The stress-strain curves obtained from the uniaxial compressive strength tests of specimens with different admixtures and fibers were investigated,and the characteristics of different stages were analyzed.The mechanical properties of different admixtures and fiber-reinforced materials,including their advantages and disadvantages,were compared through weighted comprehensive evaluation.The entire process of material failure,ranging from pore compaction,crack initiation,crack propagation,specimen instability to crack penetration,was explained via macroscopic fracture morphology,and the mechanical mechanism of how different admixtures affect the mechanical properties of concrete materials was revealed.The microscopic mechanism and the phase-evolution process of how the admixture affects concrete properties were elucidated using X-ray diffraction(XRD),hydration reaction theory,and Fourier transform infrared spectroscopy(FTIR).Furthermore,scanning electron microscopy-energy dispersive spectroscopy(SEM-EDS)was used to reveal the interfacial pore state and element distribution of the internal microstructure of concrete.The results show that PVA fiber bars can play the role of a“skeleton bridge”to improve the toughness of materials.LS can effectively promote the hydration process and cooperate with PVA fiber bars to enhance the mechanical properties of the material.EVA will inhibit the hydration reaction and degrade the material’s mechanical properties through the“organic isolation”effect.In addition,the on-site application has proven that the R3-group materials in this study can effectively inhibit the deformation of the roadway and possess strong reliability.Finally,the advantages and feasibility of LS-and-fiber-reinforced concrete were discussed from four perspectives:environmental protection,economy,disaster prevention,and development.This paper is expected to provide technical reference for the large-scale disposal of solid waste LS,the performance-optimization direction of concrete materials,and the prevention and control of coal and rock dynamic disasters.
基金supported by the Taiyuan Major Science and Technology Project Fund in 2021,Fund for Shanxi“1331 Project,”Key Research and Development Program of Shanxi Province(202102040201011)the Zhanjiang Marine Equipment and Marine Biological Industry Unveiled the Talent Team Project(2021E05034).
文摘The toughness of thermoplastic polymers such as polypropylene(PP)can be improved by adding elastomers-based toughening agents,and the phase morphology of these toughening agents is very important for the strength and toughness of PP.The low-temperature toughness of PP was improved by inserting high-density polyethylene(HDPE)between PP and polystyrene-b-ethylene-co-propyleneb-polystyrene(SEPS)to form an unusual SEPS@HDPE core–shell structure,with SEPS as the core and HDPE as the shell.Based on the microtopography and rheological behavior characterization,HDPE in PP/SEPS/HDPE composites was found to serve as an emulsifier,decrease the size of SEPS particles,and promote the homogeneous dispersion of dispersed phase particles in the matrix.An increase in the HDPE content shifted the toughening mechanism of PP composites from cavitation to matrix shear yielding.The reduction in the distance between the dispersed core–shell structure particles promoted shear yielding in the PP composites,leading to increased toughness.The creation of an intermediate HDPE layer with a moderate modulus was crucial for dispersing stress concentrations and significantly improving toughness without compromising the tensile strength.These findings will facilitate the fabrication of high-toughness PP products at low temperatures.
基金supported by the National Natural Science Foundation of China(52271210,22179032,52171176)。
文摘Exploring efficient transition-metal-based electrocatalysts is critical for the wide application of electrochemical hydrogen generation technology.Although the phase displays prominent influence on their performance,it remains a major challenge to achieve phase regulation in the same synthesis method and elucidate the intrinsic relationship between the phase and activity.Herein,we developed a sulfur induced electrodeposition strategy to achieve the precise phase regulation of nickel-based materials from Ni(OH)_(2)to Ni and Ni_(3)S_(2).S atoms can be introduced into Ni and Ni(OH)_(2)due to sulfur inducement,and the S proportion is finely controlled via changing the deposition parameters.Importantly,the obtained S-Ni catalyst displays enhanced hydrogen evolution activity with an ultralow overpotential of 27 mV at 10 mA cm^(-2),which is superior to the S-Ni(OH)_(2),Ni_(3)S_(2),and even Pt/C.Density functional theory(DFT)calculations disclose the S-Ni catalyst exhibits optimal charge state and local coordination,remarkably optimizing the water adsorption and Ni-H^(*)binding energy.This work provides new insights into phase regulation in electrodeposition and an understanding of the intrinsic relationship between phase and activity.
基金the BAGUI talent program(No.2019AC26001)the National Natural Science Foundation of China(Nos.U23A2080,22371173,22171075).
文摘The remarkable power of chemistry over description and trans-formation of matters has been significantly enhanced through the development of dynamic chemistry and condensed matter chemistry[1].This progress has further elevated chemistry to a creative science and a thriving industry.The development of dynamic chemistry,span-ning from supramolecular chemistry to constitutional dynamic chem-istry,has witnessed significant advancements towards adaptive chemistry,which is characterized primarily by its self-adaption to external stimuli.This is particularly achieved in two-or three-dimensional dynamic frameworks.Meanwhile,the multi-phase evolution resulting from the emerging of solid-to-liquid transition plat-form is assuming an increasingly crucial role in condensed matter chemistry[2].
基金supported by the National Natural Science Foundation of China(No.52074131)the Foundation and Applied Foundation Program of Guangdong Province(No.2020B1515120065)+2 种基金the Key-Area Research and Development Program of Guangdong Province(No.2020B010186002)the Science and Technology Plan Program of Guangdong Province(Nos.2015B090926013,2019B090905009)the WL13W1 beamline of Shanghai Synchrotron Radiation Facility,SSRF(proposal number 2018-SSRF-PT-006299,2020-SSRF-PT-011937)。
文摘The evolution of the 3D Fe-rich phases of Al-7.0Si-1.2Fe alloys with different Mn contents was visualized and characterized using synchrotron X-ray computed tomography,and the effect of Fe-rich phases with typical morphologies on the fracture behavior during tensile testing was analyzed.The results showed that the Fe-rich phase changed from platelet-likeβ-Al_(5) Fe Si intoα-Al_(15)(Fe Mn)_(3)Si_(2)with various morphologies after the addition of Mn.The Mn addition not only significantly reduced the volume fraction,equivalent diameter and interconnectivity of the Fe-rich phase but also greatly increased the sphericity,surface thickness,and distribution of the mean curvature and surface thickness.Furthermore,the equivalent diameter ofα-Al_(15)(FeMn)_(3)Si_(2)had an inverse exponential function relationship with its sphericity.The 3D morphology ofα-Al_(15)(FeMn)_(3)Si_(2)can be summarized as massive and regular polyhedrons,hollow and regular polyhedrons,and multibranched polyhedrons.The fraction of the different 3D morphologies in each alloy is related to the Mn content,where excess Mn increased the number and volume fraction of the large Fe-rich particles with a low sphericity.The ductility of each alloy was significantly improved by the addition of Mn but gradually decreased when the Mn/Fe ratio exceeded 1.2.The increase in largeα-Al_(15)(Mn Fe)_(3)Si_(2)with a low sphericity was the main reason for the decreased ductility of alloys with a high Mn content.
基金supported by the National Key Research and Development Plan (Nos. 2017YFB1103701, 2016YFB0701201, 2016YFB0701203)the National Natural Science Foundation of China (Nos. 51671101, 51464034, 51761037)+3 种基金the Natural Science Foundation of Jiangxi Province (Nos. 20161ACB21003, 20162BCB23013, and 20172BCB22002)the Scientific Research Foundation of the Education Department of Jiangxi Province (No. GJJ150010)the Innovative Funding for Graduate Students in Nanchang University (No. cx2016089)the Funding of Key Laboratory of Superlight Materials & Surface Technology (Harbin Engineering University), Ministry of Education
文摘The morphological evolution of Fe-rich phases in the Alalloy has been investigated with various contents of Fe,Mn,and Cr.The results show that coarse Chinese script Fe-rich phases appear in the alloy with 0.6 wt%Fe combined with trace Mn,while the blocky Fe-rich phases appear combined with trace Cr.Under the coexistence of trace Mn and Cr,a large number of fine Chinese script Fe-rich phases could be visible in the low iron-bearing AlSi_9Cu_3-alloy（0.60 wt%）.At high Fe level（1.30 wt%）,numerous Fe-rich phases with hexagonal morphologies are observed with the trace Cr,while fish-bone and pentagonal morphologies of Fe-rich phases could be simultaneously observed with the addition of both Mn and Cr.The results reveal that the trace Mn and Cr promote the morphological evolution of Fe-rich phases.The morphology evolution mechanism of Fe-rich phases has been discussed by using the atom radius and electronegativity differences of Fe,Mn,and Cr.
基金Projects(51072045,51102074)supported by the National Natural Science Foundation of China
文摘Commercial nanosized alumina and titania particles were selected as raw materials to prepare the blended slurry with composition of A1203-13%TiO2 （mass fraction）, which were reconstituted into micrometer-sized granules by spray drying, subsequently sintering at different temperatures to form nanostructured feedstock for thermal spraying, and then A1203-13%TiO2 nanocoatings were deposited by plasma spraying. The evolution of morphology, microstructure, and phase transformation of the agglomerated powder and as-sprayed coatings were characterized by X-ray diffraction （XRD） and scanning electron microscopy （SEM）. The results show that A1203 retains the same a phase as the raw material during sintering, while TiO2 changes from anatase to futile. During plasma spraying, some a-A1203 phases solidify to form metastable y-A1203, and the volume fraction of a-A1203 decreases as CPSP increases. However, peaks of the TiO2 phase are not observed from the as-sprayed coatings except for the coatings sprayed at the lower CPSP. As the CPSP increases, nanostructured TiO2 is dissolved easily in y-A1203 or z-A1203＇TiO2 phase. After heat treatment, y-A1203 in the coatings transforms to a-A1203, and rutile is precipitated.
基金Project(G2010CB635106)supported by the National Basic Research Program of ChinaProject(NCET-10-0023)supported by the Program for New Century Excellent Talents in University of ChinaProject supported by the Program for Hongliu Outstanding Talents of Lanzhou University of Technology,China
文摘The microstructural evolution and phase transformations during partial remelting of in-situ Mg2Sip/AM60B composite modified by SiC and Sr were investigated. The results indicate that SiC and Sr are effective for refining primary α-Mg grains and Mg2Si particles. After being partially remelted, a semisolid microstructure with small and spheroidal primary α-Mg particles can be obtained. The microstructural evolution during partial remelting can be divided into four stages： the initial rapid coarsening, structural separation, spheroidization and final coarsening, which are essentially caused by the phase transformations of β→α, α＋β→L and α→L, α→L, and α→L and L→α, respectively. The Mg2Si particles have not obvious effect on the general microstructural evolution steps, but can slower the evolution progress and change the coarsening mechanism. During partial remelting, Mg2Si particles first become blunt and then become spheroidal because of melting of their edges and corners, and finally are coarsened owing to Ostwald ripening.
基金This study was supported by the National Basic Research Program of China （No. 2004CB720206） the National Natural Science Foundation of China （No. 49971009）the RGC （HKU 7243/04H） Grant of the HKSAR and the Chinese Academy of Sciences （No. KZCX2-SW-118）
文摘Studies of lithology, sedimentary facies and the distribution regularity of SiO2 and Al2O3 contents and Al2O3/SiO2 ratio allow us to divide the Upper Pleistocene-Holocene Series represented by the MUanggouwan section in China＇s Salawnsu River valley into six segments： MGS1, MGS2, MGS3, MGS4, MGS5 and MGS6. The boundary ages for MGS1 （the Dishaogouwan and Dagouwan Formations）, MGS2 （the upper Chengchuan Formation）, MGS3 （the middle Chengchuan Formation）, MGS4 （the lower Chengchuan Formation）, MGS5 （most strata of the Salawusu Formation） and MGS6 （the bottom of the Salawusu Formation and the top of the Lishi Formation） correspond to those of MIS1, MIS2, MIS3, MIS4, MISS and MIS6, respectively, from deep sea sediments or continental glaciers. MGS5 can be subdivided into five subsegments （MGS5a, MGS5b, MGS5c, MGS5d and MGS5e） and the boundary ages of these subsegments correspond to those of MISSa, MISSb, MIS5c, MIS5d and MIS5e, respectively. Based on the paleoenvironment and paleoecology indicated by the primary chemical elements, fossil vertebrates, mollusks and pollen grains, we hypothesize that MGS1, MGS2, MGS3, MGS4, MGS5 and MGS6 and the subsegments of MGS5 match the corresponding stages for oxygen isotopes in the deep sea sediments and continental glaciers, and the substages of MIS5 in terms of climatic characters, further explaining the phenomena that determined the formation of the late Quaternary strata and the paleontology of the Salawusu River valley. These phenomena relate to fluctuations in the global climate （and particularly in the East Asian monsoon） during the glacial and interglacial periods.
基金supported by the National Basic Research Pro-gram of China (No. 2005CB422106)
文摘The Sinian-Lower Paleozoic （also called the lower association） in Sichuan （四川） basin has undergone geologic evolution for several hundred million years. The subsidence history of the Sinian-Lower Paleozoic can be divided into four stages： the stable subsidence during Cambrian and Silurian; the uplift and denudation during Devonian and Carboniferous; the subsidence （main process） during Permian to Late Cretaceous; and the rapid uplift and denudation since Late Cretaceous. The later two stages could be regarded as critical factors for the development of oil and gas in the lower association. The evolution of energy field such as temperature, pressure, and hydrocarbon phase in the lower association during the deep burial and uplift in the third stage might be induced as follows： （1） super-high pressure was developed during oil-cracking, previous super-high pressure was sustained, or changed as normal pressure during late uplift; （2） temperature increased with deep burial during persistent subsidence and decreased during uplift in late stage; （3） as a response to the change of the energy field, hydrocarbon phase experienced a series of changes such as organic material （solid）, oil （liquid）, oil-cracking gas （gaseous） ＋ bitumen （solid） ＋ abnormal high pressure, gas cap gas with super-high pressure （gaseous） ＋ bitumen （solid） ＋ water soluble gas （liquid）, and gas in pool （gaseous） ＋ water soluble gas （liquid） ＋ bitumen （solid）. The restoration of hydrocarbon phase evolution is of important value for the exploration of natural gas in the Sinian-Lower Paleozoic in Sichuan basin.
基金Project(51364035)supported by the National Natural Science Foundation of ChinaProject(CX2015055)supported by the Innovation Special Funds of Nanchang University for Graduate Student,China
文摘The effects of solution treatment on the evolution of the second phases and mechanical properties of7075Al alloy werestudied with scanning electron microscopy(SEM),energy dispersive X-ray spectrometry(EDS),differential scanning calorimetry(DSC),hardness and tensile tests.The results show that Mg(Zn,Cu,Al)2phases gradually dissolve into the matrix,yet the size andmorphology of Al7Cu2Fe phase exhibit no change with the increase of the solution treatment temperature and time due to its highmelting point.When the solution treatment temperature and time continue to increase,the formation of coarse black Mg2Si particlesoccurs.Compared to the as-cast alloy,the microhardness,tensile strength,and elongation of the sample under solution heat treatmentat460°C for5h are increased by55.1%,40.9%and109.1%,respectively.This is because the eutectic Mg(Zn,Cu,Al)2phases almostcompletely dissolve and basically no coarse black Mg2Si particles are formed.
基金financially supported by the National Science Foundation for Young Scientists of China (No.51304014)
文摘Quantitative parameters of bed combustion, including the thickness of the combustion zone(TCZ), the maximum temperature of the combustion zone(MTCZ), and the bed shrinkage, were characterized through a series of sinter pot tests in transparent quartz pots. The results showed that TCZ first ascended and then descended as the sintering process proceeded. The sintering process was divided into four stages according to the variation rate of the TCZ. A "relative-coordinate" method was developed to obtain the actual reaction temperature of sinter along the height direction. With increasing the sintering temperature, the reactants transformed and entered into liquid phases. The mineral composition and microstructure of the sinter were characterized through X-ray diffraction and scanning electron microscopy–energy-dispersive X-ray spectroscopy. Liquid phases with greater Fe and Al contents were more likely to form acicular-like silico-ferrite of calcium and aluminum after crystallization because of the outward spread of Al, which led to a better fluidity of the liquid. An evolution mechanism of "solid-state reaction—liquid phases formation—crystallization" of the mineral phases is proposed.
文摘The microstructure evolution law and the structure of precipitates produced during the tempering of steel AerMet100 based on TEM observation and the calibration of diffraction spot were revealed.The electronic structure and the stability of the MoxCr2-xC phase were calculated using the plane-wave pseudo-potential method on basis of density functional theory.TEM observations show that the precipitation phases Fe3C and Fe2-xCx(x=0.05～0.14) between martensite lath are produced at 425 and 480 ℃,respectively.The increase of tempering temperature or time can lead to the redissolution of both phases Fe3C and Fe2-xCx,and also lead to the precipitation of the phase Cr2C in martensite lath.The calculation results of formation energies and the density of state(DOS) demonstrate that in point of MoxCr2-xC structures formed during tempering,the early precipitation phase is Cr2C and finally later evolves into Mo2C phase with diffusing of incorporation of Mo atom into the Cr2C crystal cell,lattice,which can results in a energy decreases of the structure MoxCr2-xC phase with the increase of x.
基金support from the Natural Science Foundation of China(Nos.52104373,52074131,and 51974092)the Basic and Applied Basic Foundation of Guangdong Province(No.2020B1515120065)。
文摘This paper examines the effect of Fe addition on the microstructure characterized by scanning electron microscopy/electron backscattered diffraction,neutron diffraction,and synchrotron X-ray tomography and the mechanical properties of Al-Mg-Mn-Fe-Cu alloys.The findings reveal that the microstructures of the alloys consisted of an Al matrix,Al_(6)(FeMn),and Al_(2)CuMg phase particles.The addition of Fe significantly increased the yield strength(YS),and ultimate tensile strength(UTS)of the alloys,while reducing elongation.The transformation of the 3D morphology of the Al_(6)(FeMn)phase from separated and fine particles with Chinese-script morphology to interconnected rod-like structure as Fe content increased from 0.1%to 0.8%.This strengthening effect was attributed to the slip lines being blocked at the vicinity of the inter-connected Fe-rich phase,leading to grain rotation and dislocation density increment around the Fe-rich phase,ultimately improving the strength of the alloys.However,the Fe-rich phases and Al_(2)CuMg phases were found to be prone to cracking under tensile stress,resulting in decreased elongation of the alloys.This study provides a potential application in the design and manufacturing of new non-heat-treatable Al alloys for the automotive industry.
基金Project(2017GDASCX-0117)supported by the Guangdong Academy of Sciences,ChinaProject(201806010126)supported by the Pearl River S&T Nova Program of Guangzhou,China+3 种基金Projects(2017A050503004,2017A07071029)supported by the Guangdong Provincial Program of Science and Technology,ChinaProject(18126010)supported by the Guangxi Autonomous Regional Program of Science and Technology,ChinaProject(201802030012)supported by the Guangzhou Municipal Science and Technology Bureau,ChinaProject(2017A0109005)supported by the Sihui Plan Project of Science and Technology,China.
文摘The effect of the melt holding temperature on the morphological evolution and sedimentation behavior of iron-rich intermetallics in Al-7.0 Si-1.0 Fe-1.2 Mn-0.25 Mg alloy was investigated using an optical microscope,scanning electron microscope and differential thermal analyzer.The results show that as the holding temperature decreases,the morphologies of the primary iron-rich phase in matrix change from star-like to polygonal,and the number of the primary phases gradually decreases and disappears at 615°C.Finally,the Chinese script phases with small size,high compact and uniform distribution are obtained.In contrast,the primary iron-rich phases in slag transform into a coarser polygonal shape with lower roundness,and some of them have hollow structures.Furthermore,the area fraction of intermetallics and Fe content in the matrix decrease gradually due to the formation and growth of sludge and subsequent natural sedimentation during melt holding.With the decrease of holding temperature,the main factors hindering the settlement of the primary phases are morphology,size,and density in turn.
基金This study was supported by the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD).
文摘Molybdenum carbide(MoxC)with variable phase structure possesses flexible hydrogen-binding energy(HBE),which is a promising hydrogen evolution reaction(HER)catalyst.Herein,a hybrid multiphase MoxC freestanding film coupled with Co3Mo(CM/MoxC@NC)is synthesized through the electrospinning method supplemented by the heteroatom incorporation.CM/MoxC@NC surpasses its pure phase counterparts and exhibits remarkable catalytic activity at 114mV to deliver a current density of 10mA cm^(−2) in acid,which is among the first-rate level performance reported for MoxC-based catalysts.The subsequent ex situ and in situ characterizations reveal a phase transition mechanism based on self-catalysis that CoOx depletes the coordinated C ofα-MoC via the interaction,which realizes the assembly of weak HBEα-MoC and strong HBEβ-Mo2C,and the enhanced utilization of active materials as well.The multiple structures with optimal HBE are in favor of the stepwise reactions of HER,as the study of the correlation between HBE and phase structure revealed.This study discloses the underlying phase transition mechanism and highlights the HBE–structure relationship that should be considered for catalyst design.
基金Project(60661001) supported by the National Natural Science Foundation of China
文摘To make the ferroelectric BaTiO3 possess ferromagnetism simultaneously,magnetic Fe was doped into BaTiO3 ceramics at doping levels up to 10%(molar fraction).Both tetragonal and hexagonal phases coexisted in the Fe-doped BaTiO3 ceramics except at 1% doping level.X-ray diffraction analysis indicated that higher doping level of Fe,higher sintering temperature and longer sintering time promoted the formation of hexagonal phases in Fe-doped BaTiO3 ceramics.Ferroelectricity was observed in all samples at room temperature,but it was greatly depressed by Fe doping.Except at doping level of 1%,room-temperature ferromagnetism was observed in the BaTiO3 ceramics.The dependence of the saturation magnetization and coercivities of the Fe-doped BaTiO3 ceramics on doping level was systematically studied.Both the saturation magnetization and magnetic coercivities were found to be dependent on the doping level as well as the fraction of the hexagonal phase in the ceramics.
文摘The effect of temperature variation owing to the cooling pattern （CP） on the microstructural evolution was investigated by establishing a thermomechanical coupled FE （finite element） model. A set of constitutive equations of phase transformation was implanted into the commercial FE solver MARC through the user defined subroutine CR- PLAW, and the temperature field was calculated by another user defined subroutine FILM. The results show that the final mierostructure is completely bainite phase for CP one, 98% of bainite phase and 2% of ferrite phase for CP two, and 55% of bainite phase, 35% of pearlite phase and 10% of ferrite phase for CP three.
