Co-combustion biomass and coal can effectively reduce the emission of CO_2. O_2/H_2O combustion is regarded as the next generation of oxy-fuel combustion technology. By co-combustion biomass and coal under oxy-fuel co...Co-combustion biomass and coal can effectively reduce the emission of CO_2. O_2/H_2O combustion is regarded as the next generation of oxy-fuel combustion technology. By co-combustion biomass and coal under oxy-fuel condition, the emission of CO_2 can be minimized. This work investigates the co-combustion characteristics of single particles from pine sawdust(PS) and bituminous coal(BC) in O_2/N2, O_2/CO_2 and O_2/H_2O atmospheres at different O_2 mole fractions(21%, 30% and 40%). The experiments were carried out in a drop tube furnace(DTF), and a high speed camera was used to record the combustion process of fuel particles. The combustion temperature was measured by a two-color method. The experiments in O_2/N2 atmosphere indicate that the particles from pine sawdust and bituminous coal all ignite homogeneously. After replacing H_2O for N2, the combustion temperature of volatiles of blended fuel particles decreases, while the combustion temperature of char increases. The ignition delay time in O_2/H_2O atmosphere is shorter than that in O_2/N2 or O_2/CO_2 atmosphere. The combustion temperature of volatiles of blended fuel particles increases as the mass fraction of bituminous coal increases, while the combustion temperature of char of blended fuel particles is higher than that of biomass or bituminous coal. The ignition delay time of blended fuel particles increases with the increasing mass fraction of bituminous coal, and the experimental ignition delay time of blend fuel particles is shorter than the theoretical one. These reveal a synergy during co-combustion process of pine sawdust and bituminous coal.展开更多
In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to ...In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to obtain the maximal positive definite solution of nonlinear matrix equation X+A^(*)X|^(-α)A=Q with the case 0<α≤1.Based on this method,a new iterative algorithm is developed,and its convergence proof is given.Finally,two numerical examples are provided to show the effectiveness of the proposed method.展开更多
Objectives This review aimed to systematically synthesize the available research on the disclosure of diagnosis and related issues in childhood cancer from the perspectives of healthcare professionals,with the goal of...Objectives This review aimed to systematically synthesize the available research on the disclosure of diagnosis and related issues in childhood cancer from the perspectives of healthcare professionals,with the goal of informing the optimization of disclosure processes and meeting the communication needs of affected families.Methods In accordance with the Joanna Briggs Institute(JBI)methodology for mixed methods systematic reviews,the convergent segregated approach was used in this review.Articles were retrieved from 11 databases,including PubMed,Web of Science,CINAHL,CENTRAL,Embase,Ovid/Medline,PsycINFO,PsycArticles,Scopus,ERIC,and China National Knowledge Infrastructure(CNKI).The quality of the selected articles was assessed using the Mixed Method Appraisal Tool(MMAT).The review protocol was registered on PROSPERO(CRD42024542746).Results A total of 21 studies from 10 countries were included.Their methodological quality was generally medium to high,with MMAT scores ranging from 60%to 100%.The synthesis yielded three core themes:1)the spectrum of professional and societal attitudes toward disclosure;2)the dynamic practices of navigating disclosure amid uncertainty,including timing and environment,stakeholders,and content of disclosure;and 3)factors influencing disclosure,including children’s,parental,healthcare professionals’,and socio-cultural factors.Conclusions This review synthesized the perspectives and experiences of healthcare professionals regarding disclosure in childhood cancer,highlighting the complexity and multidimensional nature of this process in clinical practice.Future research should further investigate the experiences and needs of children and their parents,explore cultural variations in disclosure practices,develop context-appropriate assessment tools,and construct multidimensional intervention strategies to enhance the humanistic care and professional effectiveness of the disclosure process.展开更多
As binary geological media,soil-rock mixtures(SRMs)exhibit a distinct gradational composition,leading to their unique mechanical behaviors.To appraise the stability of SRM slopes,it is essential to determine equivalen...As binary geological media,soil-rock mixtures(SRMs)exhibit a distinct gradational composition,leading to their unique mechanical behaviors.To appraise the stability of SRM slopes,it is essential to determine equivalent parameters of SRMs,which are typically obtained through experimental and numerical methods.In contrasted to other numerical methods,the numerical manifold method(NMM)is more effective in addressing SRM problems.This is because the high-precision regular mathematical meshes in NMM can be used without aligning with the soil-rock interfaces and boundaries of SRMs.In the current research,the equivalent strength parameters of SRMs,i.e.the equivalent cohesion ce and internal friction angleϕ_(e),are determined using NMM.Initially,an NMM triaxial numerical model is established and validated based on triaxial experiments.Subsequently,the soil and rock parameters are derived through parameter inversion.Moreover,the impacts of rock content,size,shape and rock blocks'major-axis orientation on ce andϕ_(e) of SRMs are thoroughly examined using the NMM triaxial numerical model.Additionally,a fitting function is proposed to linkϕ_(e) to the rock content and size of SRMs.When other influencing factors are fixed,the above fitting model leads to the following conclusions:(1)the predictedϕ_(e) of SRMs increase with the increase of rock content;and(2)SRM samples with smaller rocks display a higher predictedϕ_(e).展开更多
The Good Wife is an American TV series that focuses on women’s independence,politics,and law.The drama has been remade in China,Japan,and South Korea.This research aims to use Nida’s Functional Equivalence Theory to...The Good Wife is an American TV series that focuses on women’s independence,politics,and law.The drama has been remade in China,Japan,and South Korea.This research aims to use Nida’s Functional Equivalence Theory to analyze the methods of its English-to-Chinese subtitle translation by considering social,cultural,and historic backgrounds between China and America.After data collection and case analysis,the study found that:(1)Five major translation methods are adopted in the subtitle translation of The Good Wife.They are free translation,variation,literal translation,addition,and omission.Among them,free translation is the most frequently used,while omission is used least.(2)The subtitle translation of films and TV series is limited by time and space restrictions,social-cultural differences,and other factors.When translating,translators should try to use humorous words,euphemism,intonation,and other ways,and combine different methods such as literal translation,free translation,variation,addition,omission,and other methods to seek equivalence both in the meaning and function of subtitles under the guidance of Functional Equivalence Theory.展开更多
This paper develops a semi-analytical solution for pile penetration in natural soft clays using the strain path method(SPM).The stress-strain behavior of soils is characterized by the S-CLAY1S model,which can capture ...This paper develops a semi-analytical solution for pile penetration in natural soft clays using the strain path method(SPM).The stress-strain behavior of soils is characterized by the S-CLAY1S model,which can capture the anisotropic evolution and destructuring nature of soft clays.By integrating the S-CLAY1S model into the theoretical framework of the SPM,a set of ordinary differential equations is formulated with respect to the vertical coordinate of soil particles.The distribution of excess pore water pressure(EPWP)following pile installation is approximated through one-dimensional(1D)radial integration around the pile shaft.The distribution of stresses and EPWP,along with the evolution of fabric anisotropy within the soil surrounding the pile,is presented to illustrate the response of pile penetration in natural soft clays.The proposed solution is validated against existing theoretical solutions using the SPM and cavity expansion method(CEM),along with experimental data.The findings demonstrate that the SPM reveals lower radial effective stresses and EPWP at the pile shaft than that of CEM.Pile penetration alters the soil's anisotropic properties,inducing rotational hardening and affecting post-installation stress distribution.Soil destructuration eliminates bonding among particles near the pile,resulting in a complete disruption of soil structure at the pile surface,which is particularly pronounced for higher initial soil structure ratios.Minimal variation was observed in the three principal stresses and shear stress on the cone side surface as the angle increased from 18°to 60°,except for a slight reduction in EPWP.展开更多
In this paper,a novel method for investigating the particle-crushing behavior of breeding particles in a fusion blanket is proposed.The fractal theory and Weibull distribution are combined to establish a theoretical m...In this paper,a novel method for investigating the particle-crushing behavior of breeding particles in a fusion blanket is proposed.The fractal theory and Weibull distribution are combined to establish a theoretical model,and its validity was verified using a simple impact test.A crushable discrete element method(DEM)framework is built based on the previously established theoretical model.The tensile strength,which considers the fractal theory,size effect,and Weibull variation,was assigned to each generated particle.The assigned strength is then used for crush detection by comparing it with its maximum tensile stress.Mass conservation is ensured by inserting a series of sub-particles whose total mass was equal to the quality loss.Based on the crushable DEM framework,a numerical simulation of the crushing behavior of a pebble bed with hollow cylindrical geometry under a uniaxial compression test was performed.The results of this investigation showed that the particle withstands the external load by contact and sliding at the beginning of the compression process,and the results confirmed that crushing can be considered an important method of resisting the increasing external load.A relatively regular particle arrangement aids in resisting the load and reduces the occurrence of particle crushing.However,a limit exists to the promotion of resistance.When the strain increases beyond this limit,the distribution of the crushing position tends to be isotropic over the entire pebble bed.The theoretical model and crushable DEM framework provide a new method for exploring the pebble bed in a fusion reactor,considering particle crushing.展开更多
Convex feasibility problems are widely used in image reconstruction, sparse signal recovery, and other areas. This paper is devoted to considering a class of convex feasibility problem arising from sparse signal recov...Convex feasibility problems are widely used in image reconstruction, sparse signal recovery, and other areas. This paper is devoted to considering a class of convex feasibility problem arising from sparse signal recovery. We first derive the projection formulas for a vector onto the feasible sets. The centralized circumcentered-reflection method is designed to solve the convex feasibility problem. Some numerical experiments demonstrate the feasibility and effectiveness of the proposed algorithm, showing superior performance compared to conventional alternating projection methods.展开更多
Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The t...Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The traditional thermal elastic-plastic finite element method(TEP-FEM)can accurately predict welding deformation.However,its efficiency is low because of the complex nonlinear transient computation,making it difficult to meet the needs of rapid engineering evaluation.To address this challenge,this study proposes an efficient prediction method for welding deformation in marine thin plate butt welds.This method is based on the coupled temperature gradient-thermal strain method(TG-TSM)that integrates inherent strain theory with a shell element finite element model.The proposed method first extracts the distribution pattern and characteristic value of welding-induced inherent strain through TEP-FEM analysis.This strain is then converted into the equivalent thermal load applied to the shell element model for rapid computation.The proposed method-particularly,the gradual temperature gradient-thermal strain method(GTG-TSM)-achieved improved computational efficiency and consistent precision.Furthermore,the proposed method required much less computation time than the traditional TEP-FEM.Thus,this study lays the foundation for future prediction of welding deformation in more complex marine thin plates.展开更多
To investigate the damage evolution caused by stress-driven and sub-critical crack propagation within the Beishan granite under multi-creep triaxial compressive conditions,the distributed optical fiber sensing and X-r...To investigate the damage evolution caused by stress-driven and sub-critical crack propagation within the Beishan granite under multi-creep triaxial compressive conditions,the distributed optical fiber sensing and X-ray computed tomography were combined to obtain the strain distribution over the sample surface and internal fractures of the samples.The Gini and skewness(G-S)coefficients were used to quantify strain localization during tests,where the Gini coefficient reflects the degree of clustering of elements with high strain values,i.e.,strain localization/delocalization.The strain localization-induced asymmetry of data distribution is quantified by the skewness coefficient.A precursor to granite failure is defined by the rapid and simultaneous increase of the G-S coefficients,which are calculated from strain increment,giving an earlier warning of failure by about 8%peak stress than those from absolute strain values.Moreover,the process of damage accumulation due to stress-driven crack propagation in Beishan granite is different at various confining pressures as the stress exceeds the crack initiation stress.Concretely,strain localization is continuous until brittle failure at higher confining pressure,while both strain localization and delocalization occur at lower confining pressure.Despite the different stress conditions,a similar statistical characteristic of strain localization during the creep stage is observed.The Gini coefficient increases,and the skewness coefficient decreases slightly as the creep stress is below 95%peak stress.When the accelerated strain localization begins,the Gini and skewness coefficients increase rapidly and simultaneously.展开更多
In this work,the Hierarchical Quadrature Element Method(HQEM)formulation of geometrically exact shells is proposed and applied for geometrically nonlinear analyses of both isotropic and laminated shells.The stress res...In this work,the Hierarchical Quadrature Element Method(HQEM)formulation of geometrically exact shells is proposed and applied for geometrically nonlinear analyses of both isotropic and laminated shells.The stress resultant formulation is developed within the HQEM framework,consequently significantly simplifying the computations of residual force and stiffness matrix.The present formulation inherently avoids shear and membrane locking,benefiting from its high-order approximation property.Furthermore,HQEM’s independent nodal distribution capability conveniently supports local p-refinement and flexibly facilitates mesh generation in various structural configurations through the combination of quadrilateral and triangular elements.Remarkably,in lateral buckling analysis,the HQEM outperforms the weak-form quadrilateral element(QEM)in accuracy with identical nodal degrees of freedom(three displacements and two rotations).Under high-load nonlinear response,the QEM exhibits a maximum relative deviation of approximately 9.5%from the reference,while the HQEM remains closely aligned with the benchmark results.In addition,for the cantilever beam under tip moment,HQEM produces virtually no out-of-plane deviation,compared to a slight deviation of 0.00001 with QEM,confirming its superior numerical reliability.In summary,the method demonstrates high accuracy,superior convergence,and robustness in handling large rotations and complex post-buckling behaviors across a series of benchmark problems.展开更多
Geological prospecting and the identification of adverse geological features are essential in tunnel construction,providing critical information to ensure safety and guide engineering decisions.As tunnel projects exte...Geological prospecting and the identification of adverse geological features are essential in tunnel construction,providing critical information to ensure safety and guide engineering decisions.As tunnel projects extend into deeper and more mountainous terrains,engineers face increasingly complex geological conditions,including high water pressure,intense geo-stress,elevated geothermal gradients,and active fault zones.These conditions pose substantial risks such as high-pressure water inrush,largescale collapses,and tunnel boring machine(TBM)blockages.Addressing these challenges requires advanced detection technologies capable of long-distance,high-precision,and intelligent assessments of adverse geology.This paper presents a comprehensive review of recent advancements in tunnel geological ahead prospecting methods.It summarizes the fundamental principles,technical maturity,key challenges,development trends,and real-world applications of various detection techniques.Airborne and semi-airborne geophysical methods enable large-scale reconnaissance for initial surveys in complex terrain.Tunnel-and borehole-based approaches offer high-resolution detection during excavation,including seismic ahead prospecting(SAP),TBM rock-breaking source seismic methods,fulltime-domain tunnel induced polarization(TIP),borehole electrical resistivity,and ground penetrating radar(GPR).To address scenarios involving multiple,coexisting adverse geologies,intelligent inversion and geological identification methods have been developed based on multi-source data fusion and artificial intelligence(AI)techniques.Overall,these advances significantly improve detection range,resolution,and geological characterization capabilities.The methods demonstrate strong adaptability to complex environments and provide reliable subsurface information,supporting safer and more efficient tunnel construction.展开更多
Stand age plays a crucial role in forest biomass estimation and carbon cycle modeling.Assessing the uncertainty of stand age prediction models and identifying the key driving factors in the modeling process have becom...Stand age plays a crucial role in forest biomass estimation and carbon cycle modeling.Assessing the uncertainty of stand age prediction models and identifying the key driving factors in the modeling process have become major challenges in forestry research.In this study,we selected the Shaanxi-Gansu-Ningxia region of Northeast China as the research area and utilized multi-source datasets from the summer of 2019 to extract information on spectral,textural,climatic,water balance,and stand characteristics.By integrating the Random Forest(RF)model with Monte Carlo(MC)simulation,we constructed six regression models based on different combina-tions of features and evaluated the uncertainty of each model.Furthermore,we investigated the driving factors influencing stand age modeling by analyzing the effects of different types of features on age inversion.Model performance and accuracy were assessed using the root mean square error(RMSE),mean absolute error(MAE),and the coefficient of determination(R^(2)),while the relative root mean square error(rRMSE)was employed to quantify model uncertainty.The results indicate that the scenarios with more obvious improve-ment in accuracy and effective reduction in uncertainty were Scenario 3 with the inclusion of climate and water balance information(RMSE=25.54 yr,MAE=18.03 yr,R^(2)=0.51,rRMSE=19.17%)and Scenario 5 with the inclusion of stand characterization informa-tion(RMSE=18.47 yr,MAE=13.05 yr,R^(2)=0.74,rRMSE=16.99%).Scenario 6,incorporating all feature types,achieved the highest accuracy(RMSE=17.60 yr,MAE=12.06 yr,R^(2)=0.77,rRMSE=14.19%).In this study,elevation,minimum temperature,and diameter at breast height(DBH)emerged as the key drivers of stand-age modeling.The proposed method can be used to identify drivers and to quantify uncertainty in stand-age estimation,providing a useful reference for improving model accuracy and uncertainty assessment.展开更多
In order to effectively recycle resource for the benefit of the global environment,the utilization of waste plastics as auxiliary injectant for blast furnaces is becoming increasingly important.Combustion kinetics of ...In order to effectively recycle resource for the benefit of the global environment,the utilization of waste plastics as auxiliary injectant for blast furnaces is becoming increasingly important.Combustion kinetics of plastics-coal blends with 0,10%,20%and 40%waste plastics(WP)are investigated separately by thermogravimetric analysis(TGA)from ambient temperature to 900℃in air atmosphere.These blends are combusted at the heating rates of 5,10 and 20℃/min.The results indicate that,with the increase of waste plastics content,the combustion processes of blends could be divided into one stage,two stages and three stages.The waste plastics content and heating rates have important effects on the main combustion processes of blends.With the increase of waste plastics content,the ignition temperature and the final combustion temperature of blends tend to decrease,while the combustion reaction becomes fiercer.With the increase of the heating rate,the ignition temperature,the mass loss rate of the peaks and the final combustion temperature of blends combustion tend to increase.The Flynn-Wall-Ozawa(FWO)iso-conversional method is used for the kinetic analysis of the main combustion process.The results indicate that,when the waste plastics content varied from 0 to 40%,the values of activation energy increase from 126.05 to 184.12 kJ/mol.展开更多
In this study,the thermogravimetric analysis(TGA)method has been used to evaluate the kinetic behavior of biomass,coal and its blends during oxyfuel co-combustion.The thermogravimetric results have been evaluated by t...In this study,the thermogravimetric analysis(TGA)method has been used to evaluate the kinetic behavior of biomass,coal and its blends during oxyfuel co-combustion.The thermogravimetric results have been evaluated by the Coats-Redfern method and validated by Criado’s method.TG and DTG curves indicate that as the oxygen concentration increases the ignition and burn out temperatures approach a lower temperature region.The combustion characteristic index shows that biomass to coal blends of 28%and 40%respectively can achieve enhanced combustion up to 60%oxygen enrichment.In the devolatilization region,the activation energies for coal and blends reduce while in the char oxidation region,they increase with rise in oxygen concentration.Biomass,however,indicates slightly different combustion characteristic of being degraded in a single step and its activation energies increase with rise in oxygen concentration.It is demonstrated in this work that oxygen enrichment has more positive combustion effect on coal than biomass.At 20%oxygen enrichment,28%and 40%blends indicate activation energy of 132.8 and 125.5 kJ·mol^-1 respectively which are lower than coal at 148.1 kJ·mol^-1 but higher than biomass at 81.5 kJ·mol^-1 demonstrating synergistic effect of fuel blending.Also,at char combustion step,an increase in activation energy for 28%blend is found to be 0.36 kJ·mol^-1 per rise in oxygen concentration which is higher than in 40%blend at 0.28 kJ·mol^-1.展开更多
Mixed incineration of municipal solid waste (MSW) in existing coal gangue power plant is a potentially highefficiency and low-cost MSW disposal way. In this paper, the co-combustion and pollutants emission characteris...Mixed incineration of municipal solid waste (MSW) in existing coal gangue power plant is a potentially highefficiency and low-cost MSW disposal way. In this paper, the co-combustion and pollutants emission characteristic of MSW and coal gangue was investigated in a circulating fluidized bed (CFB) combustor. The effect of MSW blend ratio, bed temperature and excess air ratio was detailedly studied. The results show the NOX and HC1 emission increases with the increasing MSW blend ratio and the SO2 emission decreases. With the increase of bed temperature, the CO emission decreases while the NOX and SO2 emission increases. The HC1 emission is nearly stable in the temperature range of 850-950℃. The increase of excess air ratio gradually increases the NOX emission but has no significant effect on the SO2 emission. The HC1 emission firstly increases and then decreases with the increase of excess air ratio. For a typical CFB operating condition with excess air ratio of 1.4, bed temperature of 900℃ and MSW blend ratio of 10%, the original CO, NOX, SO2 and HC1 emissions are 52, 181, 3373 and 58 mg/Nm^3 respectively.展开更多
A novel system combining sludge drying and co-combustion with coal was applied in disposing sludge and its atmospheric emission characteristics were tested. The system was composed of a hollow blade paddle dryer, a th...A novel system combining sludge drying and co-combustion with coal was applied in disposing sludge and its atmospheric emission characteristics were tested. The system was composed of a hollow blade paddle dryer, a thermal drying exhaust gas control system, a 75 tons/hr circulating fluidized bed and a flue gas cleaning system. The emissions of NH3, SO2, CH4 and some other pollutants released from thermal drying, and pollutants such as NOx, SO2 etc. discharged by the incinerator, were all tested. Polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans （PCDD/Fs） in the flue gas from the incinerator were investigated as well. The results indicated that the concentrations of NOx and SO2 in the flue gas from the incinerator were 145 and 16 mg/m^3, respectively, and the I-TEQ concentration of 2,3,7,8-substitued PCDD/Fs was 0.023 ng I-TEQ/Nm^3. All these values were greatly lower than the emission standards of China. In addition, there was no obvious odor in the air around the sludge dryer. The results demonstrated that this drying and co-combustion system is efficient in controlling pollutants and is a feasible way for large-scale treatment of industrial sludge and sewage sludge.展开更多
Based on the theory of computational fluid dynamics(CFD),pulverized coal combustion alone,and the co-combustion of pulverized coal and refuse-derived fuel(RDF)in a Trinal-sprayed calciner(TTF)precalciner were simulate...Based on the theory of computational fluid dynamics(CFD),pulverized coal combustion alone,and the co-combustion of pulverized coal and refuse-derived fuel(RDF)in a Trinal-sprayed calciner(TTF)precalciner were simulated.The results revealed that when coal was used as a single fuel,the velocity field in the precalciner had good symmetry,and formed three spray effects and multiple recirculation zones.The main combustion zone was distributed in the lower tertiary air and pulverized coal area,and the highest temperature reached up to 1,500 K.According to the simulation results,the predicted decomposing rate of raw meal was 90.12%,which is in good agreement with the actual measured result.In addition,with the increase in RDF content,the average temperature of the furnace,the decomposition rate of the raw meal,and the NO_(x) concentration all exhibited a downward trend.Under the condition of ensuring the normal operation of the precalciner,blending with 20%RDF is the most reasonable strategy,and the NO_(x) emissions decreased by approximately 16%.展开更多
The pulverized coal combustion in O2/CO2 atmosphere is one of the promising new technologies which can reduce the emission of carbon dioxide and NOx. In this study, the combustion behaviors of different mixing ratio o...The pulverized coal combustion in O2/CO2 atmosphere is one of the promising new technologies which can reduce the emission of carbon dioxide and NOx. In this study, the combustion behaviors of different mixing ratio of Shenhua coal with 20 μm and 74 μm particle size in the O2/CO2 atmosphere and air atmosphere were studied by using a thermal-gravimetric analyzer. The combustion characteristics such as ignition and burnout behavior were investigated in the temperature from 20℃ to 850℃. The influence of mixing ratio on combustion characteristics was conduced. The results obtained showed that the ignition temperature of the two kinds of particle size in O2/CO2 atmosphere is higher than in the air, while the activation energy in O2/CO2 atmosphere is lower. With the increasing ratio of 20 μm superfine pulverized coals, the ignition temperature and the activation energy decreased, while the DTG peak value increased, the maximum burning rate position advanced. There were three trends for the ignition temperature curve with the increasing of superfine coal ratio: the ignition of the mixed coal decreased rapidly, then changed less, at last reduced quickly.展开更多
The work is devoted to the study of combustion of brown coal,pine sawdust,and their mixtures in a fluidized bed of catalyst at 600-750℃.It is shown that an increase in the content of sawdust in a mixture with brown c...The work is devoted to the study of combustion of brown coal,pine sawdust,and their mixtures in a fluidized bed of catalyst at 600-750℃.It is shown that an increase in the content of sawdust in a mixture with brown coal leads to an increase in the burnout degree of solid fuel from 94.4%to 99.9%,while the emission of greenhouse gases in the form of CO_(2)CO and NOxis reduced(CO_(2)from the biomass is not included in the balance).The high content of alkaline earth metal oxides(CaO and MgO)in the mineral part of brown coal,sawdust,and their mixtures eliminates the emission of sulfur oxides and the slagging of heat-exchange surfaces during the combustion in a fluidized bed of catalyst.The optimal temperature,when the highest burnout degree of the above fuels is achieved in the combustion is 750℃.It is also shown that the increase in temperature and the content of sawdust in the composition of the fuel mixtures has a positive effect on the economic and environmental process indicators.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.51506091 and 51576100)the National Key R&D Program of China(Grant No.2016YFB0600100)the Fundamental Research Funds for the Central Universities(Grant No.30915011325)
文摘Co-combustion biomass and coal can effectively reduce the emission of CO_2. O_2/H_2O combustion is regarded as the next generation of oxy-fuel combustion technology. By co-combustion biomass and coal under oxy-fuel condition, the emission of CO_2 can be minimized. This work investigates the co-combustion characteristics of single particles from pine sawdust(PS) and bituminous coal(BC) in O_2/N2, O_2/CO_2 and O_2/H_2O atmospheres at different O_2 mole fractions(21%, 30% and 40%). The experiments were carried out in a drop tube furnace(DTF), and a high speed camera was used to record the combustion process of fuel particles. The combustion temperature was measured by a two-color method. The experiments in O_2/N2 atmosphere indicate that the particles from pine sawdust and bituminous coal all ignite homogeneously. After replacing H_2O for N2, the combustion temperature of volatiles of blended fuel particles decreases, while the combustion temperature of char increases. The ignition delay time in O_2/H_2O atmosphere is shorter than that in O_2/N2 or O_2/CO_2 atmosphere. The combustion temperature of volatiles of blended fuel particles increases as the mass fraction of bituminous coal increases, while the combustion temperature of char of blended fuel particles is higher than that of biomass or bituminous coal. The ignition delay time of blended fuel particles increases with the increasing mass fraction of bituminous coal, and the experimental ignition delay time of blend fuel particles is shorter than the theoretical one. These reveal a synergy during co-combustion process of pine sawdust and bituminous coal.
基金Supported in part by Natural Science Foundation of Guangxi(2023GXNSFAA026246)in part by the Central Government's Guide to Local Science and Technology Development Fund(GuikeZY23055044)in part by the National Natural Science Foundation of China(62363003)。
文摘In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to obtain the maximal positive definite solution of nonlinear matrix equation X+A^(*)X|^(-α)A=Q with the case 0<α≤1.Based on this method,a new iterative algorithm is developed,and its convergence proof is given.Finally,two numerical examples are provided to show the effectiveness of the proposed method.
基金supported by the Fuxing Nursing Research Foundation of Fudan University[FNF202352].
文摘Objectives This review aimed to systematically synthesize the available research on the disclosure of diagnosis and related issues in childhood cancer from the perspectives of healthcare professionals,with the goal of informing the optimization of disclosure processes and meeting the communication needs of affected families.Methods In accordance with the Joanna Briggs Institute(JBI)methodology for mixed methods systematic reviews,the convergent segregated approach was used in this review.Articles were retrieved from 11 databases,including PubMed,Web of Science,CINAHL,CENTRAL,Embase,Ovid/Medline,PsycINFO,PsycArticles,Scopus,ERIC,and China National Knowledge Infrastructure(CNKI).The quality of the selected articles was assessed using the Mixed Method Appraisal Tool(MMAT).The review protocol was registered on PROSPERO(CRD42024542746).Results A total of 21 studies from 10 countries were included.Their methodological quality was generally medium to high,with MMAT scores ranging from 60%to 100%.The synthesis yielded three core themes:1)the spectrum of professional and societal attitudes toward disclosure;2)the dynamic practices of navigating disclosure amid uncertainty,including timing and environment,stakeholders,and content of disclosure;and 3)factors influencing disclosure,including children’s,parental,healthcare professionals’,and socio-cultural factors.Conclusions This review synthesized the perspectives and experiences of healthcare professionals regarding disclosure in childhood cancer,highlighting the complexity and multidimensional nature of this process in clinical practice.Future research should further investigate the experiences and needs of children and their parents,explore cultural variations in disclosure practices,develop context-appropriate assessment tools,and construct multidimensional intervention strategies to enhance the humanistic care and professional effectiveness of the disclosure process.
基金supported by the National Natural Science Foundation of China(Grant Nos.12272393 and 52130905).
文摘As binary geological media,soil-rock mixtures(SRMs)exhibit a distinct gradational composition,leading to their unique mechanical behaviors.To appraise the stability of SRM slopes,it is essential to determine equivalent parameters of SRMs,which are typically obtained through experimental and numerical methods.In contrasted to other numerical methods,the numerical manifold method(NMM)is more effective in addressing SRM problems.This is because the high-precision regular mathematical meshes in NMM can be used without aligning with the soil-rock interfaces and boundaries of SRMs.In the current research,the equivalent strength parameters of SRMs,i.e.the equivalent cohesion ce and internal friction angleϕ_(e),are determined using NMM.Initially,an NMM triaxial numerical model is established and validated based on triaxial experiments.Subsequently,the soil and rock parameters are derived through parameter inversion.Moreover,the impacts of rock content,size,shape and rock blocks'major-axis orientation on ce andϕ_(e) of SRMs are thoroughly examined using the NMM triaxial numerical model.Additionally,a fitting function is proposed to linkϕ_(e) to the rock content and size of SRMs.When other influencing factors are fixed,the above fitting model leads to the following conclusions:(1)the predictedϕ_(e) of SRMs increase with the increase of rock content;and(2)SRM samples with smaller rocks display a higher predictedϕ_(e).
文摘The Good Wife is an American TV series that focuses on women’s independence,politics,and law.The drama has been remade in China,Japan,and South Korea.This research aims to use Nida’s Functional Equivalence Theory to analyze the methods of its English-to-Chinese subtitle translation by considering social,cultural,and historic backgrounds between China and America.After data collection and case analysis,the study found that:(1)Five major translation methods are adopted in the subtitle translation of The Good Wife.They are free translation,variation,literal translation,addition,and omission.Among them,free translation is the most frequently used,while omission is used least.(2)The subtitle translation of films and TV series is limited by time and space restrictions,social-cultural differences,and other factors.When translating,translators should try to use humorous words,euphemism,intonation,and other ways,and combine different methods such as literal translation,free translation,variation,addition,omission,and other methods to seek equivalence both in the meaning and function of subtitles under the guidance of Functional Equivalence Theory.
基金support from the National Natural Science Foundation of China(Grant No.42407256)the State Key Laboratory of Hydraulics and Mountain River Engineering,China(Grant No.SKHL2113)the Sichuan Science and Technology Program(Grant No.2024YFHZ0341).
文摘This paper develops a semi-analytical solution for pile penetration in natural soft clays using the strain path method(SPM).The stress-strain behavior of soils is characterized by the S-CLAY1S model,which can capture the anisotropic evolution and destructuring nature of soft clays.By integrating the S-CLAY1S model into the theoretical framework of the SPM,a set of ordinary differential equations is formulated with respect to the vertical coordinate of soil particles.The distribution of excess pore water pressure(EPWP)following pile installation is approximated through one-dimensional(1D)radial integration around the pile shaft.The distribution of stresses and EPWP,along with the evolution of fabric anisotropy within the soil surrounding the pile,is presented to illustrate the response of pile penetration in natural soft clays.The proposed solution is validated against existing theoretical solutions using the SPM and cavity expansion method(CEM),along with experimental data.The findings demonstrate that the SPM reveals lower radial effective stresses and EPWP at the pile shaft than that of CEM.Pile penetration alters the soil's anisotropic properties,inducing rotational hardening and affecting post-installation stress distribution.Soil destructuration eliminates bonding among particles near the pile,resulting in a complete disruption of soil structure at the pile surface,which is particularly pronounced for higher initial soil structure ratios.Minimal variation was observed in the three principal stresses and shear stress on the cone side surface as the angle increased from 18°to 60°,except for a slight reduction in EPWP.
基金supported by Anhui Provincial Natural Science Foundation(2408085QA030)Natural Science Research Project of Anhui Educational Committee,China(2022AH050825)+3 种基金Medical Special Cultivation Project of Anhui University of Science and Technology(YZ2023H2C008)the Excellent Research and Innovation Team of Anhui Province,China(2022AH010052)the Scientific Research Foundation for High-level Talents of Anhui University of Science and Technology,China(2021yjrc51)Collaborative Innovation Program of Hefei Science Center,CAS,China(2019HSC-CIP006).
文摘In this paper,a novel method for investigating the particle-crushing behavior of breeding particles in a fusion blanket is proposed.The fractal theory and Weibull distribution are combined to establish a theoretical model,and its validity was verified using a simple impact test.A crushable discrete element method(DEM)framework is built based on the previously established theoretical model.The tensile strength,which considers the fractal theory,size effect,and Weibull variation,was assigned to each generated particle.The assigned strength is then used for crush detection by comparing it with its maximum tensile stress.Mass conservation is ensured by inserting a series of sub-particles whose total mass was equal to the quality loss.Based on the crushable DEM framework,a numerical simulation of the crushing behavior of a pebble bed with hollow cylindrical geometry under a uniaxial compression test was performed.The results of this investigation showed that the particle withstands the external load by contact and sliding at the beginning of the compression process,and the results confirmed that crushing can be considered an important method of resisting the increasing external load.A relatively regular particle arrangement aids in resisting the load and reduces the occurrence of particle crushing.However,a limit exists to the promotion of resistance.When the strain increases beyond this limit,the distribution of the crushing position tends to be isotropic over the entire pebble bed.The theoretical model and crushable DEM framework provide a new method for exploring the pebble bed in a fusion reactor,considering particle crushing.
基金Supported by the Natural Science Foundation of Guangxi Province(Grant Nos.2023GXNSFAA026067,2024GXN SFAA010521)the National Natural Science Foundation of China(Nos.12361079,12201149,12261026).
文摘Convex feasibility problems are widely used in image reconstruction, sparse signal recovery, and other areas. This paper is devoted to considering a class of convex feasibility problem arising from sparse signal recovery. We first derive the projection formulas for a vector onto the feasible sets. The centralized circumcentered-reflection method is designed to solve the convex feasibility problem. Some numerical experiments demonstrate the feasibility and effectiveness of the proposed algorithm, showing superior performance compared to conventional alternating projection methods.
基金Supported by the National Natural Science Foundation of China under Grant No.51975138the High-Tech Ship Scientific Research Project from the Ministry of Industry and Information Technology under Grant No.CJ05N20the National Defense Basic Research Project under Grant No.JCKY2023604C006.
文摘Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The traditional thermal elastic-plastic finite element method(TEP-FEM)can accurately predict welding deformation.However,its efficiency is low because of the complex nonlinear transient computation,making it difficult to meet the needs of rapid engineering evaluation.To address this challenge,this study proposes an efficient prediction method for welding deformation in marine thin plate butt welds.This method is based on the coupled temperature gradient-thermal strain method(TG-TSM)that integrates inherent strain theory with a shell element finite element model.The proposed method first extracts the distribution pattern and characteristic value of welding-induced inherent strain through TEP-FEM analysis.This strain is then converted into the equivalent thermal load applied to the shell element model for rapid computation.The proposed method-particularly,the gradual temperature gradient-thermal strain method(GTG-TSM)-achieved improved computational efficiency and consistent precision.Furthermore,the proposed method required much less computation time than the traditional TEP-FEM.Thus,this study lays the foundation for future prediction of welding deformation in more complex marine thin plates.
基金supported by the National Natural Science Foundation of China(Grant No.52339001).
文摘To investigate the damage evolution caused by stress-driven and sub-critical crack propagation within the Beishan granite under multi-creep triaxial compressive conditions,the distributed optical fiber sensing and X-ray computed tomography were combined to obtain the strain distribution over the sample surface and internal fractures of the samples.The Gini and skewness(G-S)coefficients were used to quantify strain localization during tests,where the Gini coefficient reflects the degree of clustering of elements with high strain values,i.e.,strain localization/delocalization.The strain localization-induced asymmetry of data distribution is quantified by the skewness coefficient.A precursor to granite failure is defined by the rapid and simultaneous increase of the G-S coefficients,which are calculated from strain increment,giving an earlier warning of failure by about 8%peak stress than those from absolute strain values.Moreover,the process of damage accumulation due to stress-driven crack propagation in Beishan granite is different at various confining pressures as the stress exceeds the crack initiation stress.Concretely,strain localization is continuous until brittle failure at higher confining pressure,while both strain localization and delocalization occur at lower confining pressure.Despite the different stress conditions,a similar statistical characteristic of strain localization during the creep stage is observed.The Gini coefficient increases,and the skewness coefficient decreases slightly as the creep stress is below 95%peak stress.When the accelerated strain localization begins,the Gini and skewness coefficients increase rapidly and simultaneously.
基金supported by the National Natural Science Foundation of China(Grant Nos.12472194,12002018,11972004,11772031,11402015).
文摘In this work,the Hierarchical Quadrature Element Method(HQEM)formulation of geometrically exact shells is proposed and applied for geometrically nonlinear analyses of both isotropic and laminated shells.The stress resultant formulation is developed within the HQEM framework,consequently significantly simplifying the computations of residual force and stiffness matrix.The present formulation inherently avoids shear and membrane locking,benefiting from its high-order approximation property.Furthermore,HQEM’s independent nodal distribution capability conveniently supports local p-refinement and flexibly facilitates mesh generation in various structural configurations through the combination of quadrilateral and triangular elements.Remarkably,in lateral buckling analysis,the HQEM outperforms the weak-form quadrilateral element(QEM)in accuracy with identical nodal degrees of freedom(three displacements and two rotations).Under high-load nonlinear response,the QEM exhibits a maximum relative deviation of approximately 9.5%from the reference,while the HQEM remains closely aligned with the benchmark results.In addition,for the cantilever beam under tip moment,HQEM produces virtually no out-of-plane deviation,compared to a slight deviation of 0.00001 with QEM,confirming its superior numerical reliability.In summary,the method demonstrates high accuracy,superior convergence,and robustness in handling large rotations and complex post-buckling behaviors across a series of benchmark problems.
基金supported by the National Natural Science Foundation of China(Grant Nos.52021005,52325904,and 51991391)。
文摘Geological prospecting and the identification of adverse geological features are essential in tunnel construction,providing critical information to ensure safety and guide engineering decisions.As tunnel projects extend into deeper and more mountainous terrains,engineers face increasingly complex geological conditions,including high water pressure,intense geo-stress,elevated geothermal gradients,and active fault zones.These conditions pose substantial risks such as high-pressure water inrush,largescale collapses,and tunnel boring machine(TBM)blockages.Addressing these challenges requires advanced detection technologies capable of long-distance,high-precision,and intelligent assessments of adverse geology.This paper presents a comprehensive review of recent advancements in tunnel geological ahead prospecting methods.It summarizes the fundamental principles,technical maturity,key challenges,development trends,and real-world applications of various detection techniques.Airborne and semi-airborne geophysical methods enable large-scale reconnaissance for initial surveys in complex terrain.Tunnel-and borehole-based approaches offer high-resolution detection during excavation,including seismic ahead prospecting(SAP),TBM rock-breaking source seismic methods,fulltime-domain tunnel induced polarization(TIP),borehole electrical resistivity,and ground penetrating radar(GPR).To address scenarios involving multiple,coexisting adverse geologies,intelligent inversion and geological identification methods have been developed based on multi-source data fusion and artificial intelligence(AI)techniques.Overall,these advances significantly improve detection range,resolution,and geological characterization capabilities.The methods demonstrate strong adaptability to complex environments and provide reliable subsurface information,supporting safer and more efficient tunnel construction.
基金Under the auspices of the Natural Science Foundation of China(No.32371875,32001249)。
文摘Stand age plays a crucial role in forest biomass estimation and carbon cycle modeling.Assessing the uncertainty of stand age prediction models and identifying the key driving factors in the modeling process have become major challenges in forestry research.In this study,we selected the Shaanxi-Gansu-Ningxia region of Northeast China as the research area and utilized multi-source datasets from the summer of 2019 to extract information on spectral,textural,climatic,water balance,and stand characteristics.By integrating the Random Forest(RF)model with Monte Carlo(MC)simulation,we constructed six regression models based on different combina-tions of features and evaluated the uncertainty of each model.Furthermore,we investigated the driving factors influencing stand age modeling by analyzing the effects of different types of features on age inversion.Model performance and accuracy were assessed using the root mean square error(RMSE),mean absolute error(MAE),and the coefficient of determination(R^(2)),while the relative root mean square error(rRMSE)was employed to quantify model uncertainty.The results indicate that the scenarios with more obvious improve-ment in accuracy and effective reduction in uncertainty were Scenario 3 with the inclusion of climate and water balance information(RMSE=25.54 yr,MAE=18.03 yr,R^(2)=0.51,rRMSE=19.17%)and Scenario 5 with the inclusion of stand characterization informa-tion(RMSE=18.47 yr,MAE=13.05 yr,R^(2)=0.74,rRMSE=16.99%).Scenario 6,incorporating all feature types,achieved the highest accuracy(RMSE=17.60 yr,MAE=12.06 yr,R^(2)=0.77,rRMSE=14.19%).In this study,elevation,minimum temperature,and diameter at breast height(DBH)emerged as the key drivers of stand-age modeling.The proposed method can be used to identify drivers and to quantify uncertainty in stand-age estimation,providing a useful reference for improving model accuracy and uncertainty assessment.
基金Item Sponsored by National Key Technology Research and Development Program in 11th Five-Year Plan of China(2008BAB32B05)
文摘In order to effectively recycle resource for the benefit of the global environment,the utilization of waste plastics as auxiliary injectant for blast furnaces is becoming increasingly important.Combustion kinetics of plastics-coal blends with 0,10%,20%and 40%waste plastics(WP)are investigated separately by thermogravimetric analysis(TGA)from ambient temperature to 900℃in air atmosphere.These blends are combusted at the heating rates of 5,10 and 20℃/min.The results indicate that,with the increase of waste plastics content,the combustion processes of blends could be divided into one stage,two stages and three stages.The waste plastics content and heating rates have important effects on the main combustion processes of blends.With the increase of waste plastics content,the ignition temperature and the final combustion temperature of blends tend to decrease,while the combustion reaction becomes fiercer.With the increase of the heating rate,the ignition temperature,the mass loss rate of the peaks and the final combustion temperature of blends combustion tend to increase.The Flynn-Wall-Ozawa(FWO)iso-conversional method is used for the kinetic analysis of the main combustion process.The results indicate that,when the waste plastics content varied from 0 to 40%,the values of activation energy increase from 126.05 to 184.12 kJ/mol.
基金Financed by the International Cooperation Foundation for ChinaUSA(NSFC-NSF 51661125012)。
文摘In this study,the thermogravimetric analysis(TGA)method has been used to evaluate the kinetic behavior of biomass,coal and its blends during oxyfuel co-combustion.The thermogravimetric results have been evaluated by the Coats-Redfern method and validated by Criado’s method.TG and DTG curves indicate that as the oxygen concentration increases the ignition and burn out temperatures approach a lower temperature region.The combustion characteristic index shows that biomass to coal blends of 28%and 40%respectively can achieve enhanced combustion up to 60%oxygen enrichment.In the devolatilization region,the activation energies for coal and blends reduce while in the char oxidation region,they increase with rise in oxygen concentration.Biomass,however,indicates slightly different combustion characteristic of being degraded in a single step and its activation energies increase with rise in oxygen concentration.It is demonstrated in this work that oxygen enrichment has more positive combustion effect on coal than biomass.At 20%oxygen enrichment,28%and 40%blends indicate activation energy of 132.8 and 125.5 kJ·mol^-1 respectively which are lower than coal at 148.1 kJ·mol^-1 but higher than biomass at 81.5 kJ·mol^-1 demonstrating synergistic effect of fuel blending.Also,at char combustion step,an increase in activation energy for 28%blend is found to be 0.36 kJ·mol^-1 per rise in oxygen concentration which is higher than in 40%blend at 0.28 kJ·mol^-1.
基金This work was supported by the National Natural Science Foundation of China (Grant No.U1610254)Shanxi Province Coal-based key Technology Research and Development Program (Grant No.MD2014-03).
文摘Mixed incineration of municipal solid waste (MSW) in existing coal gangue power plant is a potentially highefficiency and low-cost MSW disposal way. In this paper, the co-combustion and pollutants emission characteristic of MSW and coal gangue was investigated in a circulating fluidized bed (CFB) combustor. The effect of MSW blend ratio, bed temperature and excess air ratio was detailedly studied. The results show the NOX and HC1 emission increases with the increasing MSW blend ratio and the SO2 emission decreases. With the increase of bed temperature, the CO emission decreases while the NOX and SO2 emission increases. The HC1 emission is nearly stable in the temperature range of 850-950℃. The increase of excess air ratio gradually increases the NOX emission but has no significant effect on the SO2 emission. The HC1 emission firstly increases and then decreases with the increase of excess air ratio. For a typical CFB operating condition with excess air ratio of 1.4, bed temperature of 900℃ and MSW blend ratio of 10%, the original CO, NOX, SO2 and HC1 emissions are 52, 181, 3373 and 58 mg/Nm^3 respectively.
基金supported by the National High Technology Research and Development Program (863) of China (No.SS2012AA063305)the Major Science and Technology Program for Water Pollution Control and Treatment (No.2009ZX07317-003)
文摘A novel system combining sludge drying and co-combustion with coal was applied in disposing sludge and its atmospheric emission characteristics were tested. The system was composed of a hollow blade paddle dryer, a thermal drying exhaust gas control system, a 75 tons/hr circulating fluidized bed and a flue gas cleaning system. The emissions of NH3, SO2, CH4 and some other pollutants released from thermal drying, and pollutants such as NOx, SO2 etc. discharged by the incinerator, were all tested. Polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans （PCDD/Fs） in the flue gas from the incinerator were investigated as well. The results indicated that the concentrations of NOx and SO2 in the flue gas from the incinerator were 145 and 16 mg/m^3, respectively, and the I-TEQ concentration of 2,3,7,8-substitued PCDD/Fs was 0.023 ng I-TEQ/Nm^3. All these values were greatly lower than the emission standards of China. In addition, there was no obvious odor in the air around the sludge dryer. The results demonstrated that this drying and co-combustion system is efficient in controlling pollutants and is a feasible way for large-scale treatment of industrial sludge and sewage sludge.
基金the General Institute of Building Materials Research of China(No.2017YFC0210801)the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)。
文摘Based on the theory of computational fluid dynamics(CFD),pulverized coal combustion alone,and the co-combustion of pulverized coal and refuse-derived fuel(RDF)in a Trinal-sprayed calciner(TTF)precalciner were simulated.The results revealed that when coal was used as a single fuel,the velocity field in the precalciner had good symmetry,and formed three spray effects and multiple recirculation zones.The main combustion zone was distributed in the lower tertiary air and pulverized coal area,and the highest temperature reached up to 1,500 K.According to the simulation results,the predicted decomposing rate of raw meal was 90.12%,which is in good agreement with the actual measured result.In addition,with the increase in RDF content,the average temperature of the furnace,the decomposition rate of the raw meal,and the NO_(x) concentration all exhibited a downward trend.Under the condition of ensuring the normal operation of the precalciner,blending with 20%RDF is the most reasonable strategy,and the NO_(x) emissions decreased by approximately 16%.
文摘The pulverized coal combustion in O2/CO2 atmosphere is one of the promising new technologies which can reduce the emission of carbon dioxide and NOx. In this study, the combustion behaviors of different mixing ratio of Shenhua coal with 20 μm and 74 μm particle size in the O2/CO2 atmosphere and air atmosphere were studied by using a thermal-gravimetric analyzer. The combustion characteristics such as ignition and burnout behavior were investigated in the temperature from 20℃ to 850℃. The influence of mixing ratio on combustion characteristics was conduced. The results obtained showed that the ignition temperature of the two kinds of particle size in O2/CO2 atmosphere is higher than in the air, while the activation energy in O2/CO2 atmosphere is lower. With the increasing ratio of 20 μm superfine pulverized coals, the ignition temperature and the activation energy decreased, while the DTG peak value increased, the maximum burning rate position advanced. There were three trends for the ignition temperature curve with the increasing of superfine coal ratio: the ignition of the mixed coal decreased rapidly, then changed less, at last reduced quickly.
基金funded by the Ministry of Science and Higher Education of the Russian Federation,within the governmental order for the Boreskov Institute of Catalysis(project AAAA-A21-121011390007-7)The economic assessment and Environmental impact calculation were performed as part of the Tyumen University state assignment[project No.FEWZ2021–0014(Scientific and technical foundations and applied solutions for integrated energy and thermal processing of biomass to ensure environmentally friendly technologies in energy industry and metallurgy)]。
文摘The work is devoted to the study of combustion of brown coal,pine sawdust,and their mixtures in a fluidized bed of catalyst at 600-750℃.It is shown that an increase in the content of sawdust in a mixture with brown coal leads to an increase in the burnout degree of solid fuel from 94.4%to 99.9%,while the emission of greenhouse gases in the form of CO_(2)CO and NOxis reduced(CO_(2)from the biomass is not included in the balance).The high content of alkaline earth metal oxides(CaO and MgO)in the mineral part of brown coal,sawdust,and their mixtures eliminates the emission of sulfur oxides and the slagging of heat-exchange surfaces during the combustion in a fluidized bed of catalyst.The optimal temperature,when the highest burnout degree of the above fuels is achieved in the combustion is 750℃.It is also shown that the increase in temperature and the content of sawdust in the composition of the fuel mixtures has a positive effect on the economic and environmental process indicators.
