The present work aims to investigate the effects of quenching, lamellarizing, and tempering(QLT)heat treatment on the microstructure and mechanical properties of ZG14Ni3Cr1Mo V high-strength low-alloy(HSLA) steel by c...The present work aims to investigate the effects of quenching, lamellarizing, and tempering(QLT)heat treatment on the microstructure and mechanical properties of ZG14Ni3Cr1Mo V high-strength low-alloy(HSLA) steel by comparing with traditional quenching and tempering(QT) heat treatment. Following the various QLT heat treatments, a dual-phase microstructure consisting of “soft” ferrite and “hard” tempered bainite is obtained, exhibiting significantly refined grain sizes(38.87 to 46.51 μm for QLT samples) compared to QT samples(64.93 μm). As the lamellar quenching temperature increases from 750 ℃ to 810 ℃, the yield strength and tensile strength of the QLT samples increase, although they remain lower than those of the QT samples. Conversely, elongation at fracture, reduction of area, and the product of strength and elongation synergy decrease, yet consistently exceed QT levels. Notably, the QLT samples demonstrate superior cryogenic impact toughness within the range of-80 ℃ to-120 ℃, achieving optimal values after 910 ℃ quenching + 780 ℃ lamellar quenching + 670 ℃ tempering: 215.97 J at-80 ℃, 207.80 J at-100℃, and 183.17 J at-120 ℃. This exceptional cryogenic toughness is attributed to two key mechanisms in the dual-phase microstructure:(i) a low dislocation density that suppresses crack initiation, and(ii) crack-tip passivation by soft ferrite, coupled with crack deflection and hindrance at high-angle grain boundaries(HAGBs). The results establish QLT as a viable method for enhancing cryogenic toughness in ZG14Ni3Cr1Mo V HSLA steels.展开更多
基金supported by the Science and Technology Planning Joint Program of Liaoning Province(Applied Basic Research Project,No.2023JH2/101700054).
文摘The present work aims to investigate the effects of quenching, lamellarizing, and tempering(QLT)heat treatment on the microstructure and mechanical properties of ZG14Ni3Cr1Mo V high-strength low-alloy(HSLA) steel by comparing with traditional quenching and tempering(QT) heat treatment. Following the various QLT heat treatments, a dual-phase microstructure consisting of “soft” ferrite and “hard” tempered bainite is obtained, exhibiting significantly refined grain sizes(38.87 to 46.51 μm for QLT samples) compared to QT samples(64.93 μm). As the lamellar quenching temperature increases from 750 ℃ to 810 ℃, the yield strength and tensile strength of the QLT samples increase, although they remain lower than those of the QT samples. Conversely, elongation at fracture, reduction of area, and the product of strength and elongation synergy decrease, yet consistently exceed QT levels. Notably, the QLT samples demonstrate superior cryogenic impact toughness within the range of-80 ℃ to-120 ℃, achieving optimal values after 910 ℃ quenching + 780 ℃ lamellar quenching + 670 ℃ tempering: 215.97 J at-80 ℃, 207.80 J at-100℃, and 183.17 J at-120 ℃. This exceptional cryogenic toughness is attributed to two key mechanisms in the dual-phase microstructure:(i) a low dislocation density that suppresses crack initiation, and(ii) crack-tip passivation by soft ferrite, coupled with crack deflection and hindrance at high-angle grain boundaries(HAGBs). The results establish QLT as a viable method for enhancing cryogenic toughness in ZG14Ni3Cr1Mo V HSLA steels.
