期刊文献+

铁素体球墨铸铁损伤力学特性 被引量:1

Damage mechanics of ferrite ductile iron
在线阅读 下载PDF
导出
摘要 根据损伤力学的基本原理,利用测量电阻的方法,研究了拉伸受力状态下,铁素体球墨铸铁的损伤力学特性。得出了损伤变量随应力和应变而变化的演变规律。认为球墨铸铁存在损伤阈值,其大小随球化率提高而呈直线增大,但损伤阈值皆小于屈服强度;临界损伤变量与球化率的关系不大,在本试验条件下,约为0.060~0.068。研究结果表明,当应力大于一定程度时,损伤发生,且随应力增加而逐渐增大。 According to principle of damage mechanics,the damage charcteristics of ferrite nodular cast iron under uniaxial stress was studied by measuring its electric resistance.The evolutional law of damage variable as a function of stress was obtained.The damage threshold of nodular cast iron increases with nodularity,but it is below the yield strength.The critical damage variable is not related to the nodularity,which is about 0060~0068.The results show that the damage in nodular cast iron happens when the applied atress is more than a certain extent,and the damage variable increases with stress.
出处 《长安大学学报(自然科学版)》 EI CAS CSCD 北大核心 2003年第6期103-107,共5页 Journal of Chang’an University(Natural Science Edition)
关键词 铁素体球墨铸铁 损伤力学 损伤阈值 临界损伤变量 metal technology nodular cast iron damage mechanics damage threshold critical damage variable
  • 相关文献

参考文献3

二级参考文献2

  • 1楼志文,损伤力学基础,1991年
  • 2徐灏,疲劳强度,1988年

共引文献5

同被引文献5

  • 1Hill R. The mathematical theory of plasticity[M].Oxford:Oxford University Press, 1967.
  • 2Marciniak Z, Kuczynski K. Limit strains in the processes of stretch-forming sheet metal[J].Int J Mech Sci, 1967,(9):609-620.
  • 3Narasimhan K, Wagoner R H. Finite element modeling of in-plane forming limit diagrams of sheets containing finite defects[J]. Metall Trans, 1991, (22A) :2655-2665.
  • 4Keeler S P, Backofen W A. Plastic instability and fracture in sheets stretched over rigid punches [J].Trans Am Soc Metals, 1963,(56):25-48.
  • 5程侠,贾争现,邰卫华.一个用于预测金属板材断裂的损伤破坏准则[J].长安大学学报(建筑与环境科学版),2003,20(2):62-65. 被引量:4

引证文献1

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部