期刊文献+

部分剪力连接钢—砼简支组合梁变形计算 被引量:5

Predicting deflection of simply supported steel-concrete composite beams with partial shear connection
在线阅读 下载PDF
导出
摘要 由于组合梁交界面滑移的存在,随着剪力连接程度的降低,部分剪力连接钢—砼组合梁变形会显著增加,精确计算也变得非常困难和复杂。本文在曲率微分方程和滑移应变微分方程的基础上,采用两种不同的方法,建立了精确计算部分剪力连接钢—砼简支组合梁变形的一般公式,得出了部分剪力连接简支组合梁的变形和附加变形与剪力连接程度系数之间的关系与规律,公式简单、实用。对其它类型的部分剪力连接组合梁变形分析也具有很高的指导意义。 On account of the slips in the interface, the deflection of the steelconcrete composite beams with partial shear connection increases notably with decrease in the shear connection degree, and it is very difficult and complex to predict it accurately. Basing on the differential equations of curvature and slip strain, this paper sets two general formula to predict the deflection of simply supported steelconcrete composite beams with partial shear connection by two different methods, and puts forward the relationships and laws between the deflection and additional deflection of beams and the shear connection degree coefficient. All general formula are simple and practical, they have a well guideline to predict accurately the deflection of other types of composite beams too.
作者 孙文彬
出处 《辽宁工程技术大学学报(自然科学版)》 CAS 北大核心 2003年第1期71-73,共3页 Journal of Liaoning Technical University (Natural Science)
基金 淮阴工学院立项资助项目(0014) 淮阴工学院骨干教师基金资助项目(0111)
关键词 钢-砼简支组合梁 附加变形 剪力连接程度系数 变形 计算方法 部分剪力连接 partial shear connection simply supported beam degree coefficient deflection predicting methods
  • 相关文献

参考文献5

  • 1中华人民共和国建设部标准.钢结构设计规范(GBJ17-88)[S].北京:中国计划出版社,1988..
  • 2中华人民共和国建设部标准.高层民用建筑钢结构规程[S](JGJ99-98)[M].北京:中国建筑工业出版社,1998..
  • 3朱聘儒 国明超 朱起 等.钢-砼组台梁协同工作的分析及试验.建筑结构学报,1987,8(5):42-51.
  • 4南京工学院数学教研组编.高等数学(第二版)(上册)[M].北京:高等教育出版社,1985.197.
  • 5孙文彬.部分剪力连接钢-砼组合梁的滑移及曲率分析[J].力学与实践,2001,23(6):44-47. 被引量:17

二级参考文献2

共引文献16

同被引文献32

引证文献5

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部