期刊文献+

小角x射线散射法研究甲基改性氧化硅凝胶的双分形结构 被引量:2

Two fractal structures of methyl-modified Silica gels by SAXS
原文传递
导出
摘要 以正硅酸乙酯 [Si(OC2 H5) 4,TEOS]和甲基三乙氧基硅烷 [CH3Si(OC2 H5) 3,MTES]为前驱体 ,通过共水解法和两步法制备出两种不同的甲基改性氧化硅凝胶 ,在北京同步辐射光源 (BSRF)小角x射线散射 (SAXS)站测量了凝胶的散射强度 ,计算了凝胶的平均粒径、两相间比表面积等参数 ,在此基础上分析了凝胶的分形特征 ,发现存在两个尺度上的分形结构 ,分别对应于从SiO2 原生颗粒到一次团聚体和从一次团聚体到簇团两种尺度 .辅以透射电子显微镜 (TEM)观测 ,证实由两种方法获得的凝胶具有非常不同的微观结构 .实验证明 ,利用SAXS技术研究甲基改性凝胶的分形特征是获得凝胶微观结构的有力工具 . With tetraethoxysilane [ Si(OC2 H-5)(4), TEOS] and methyltriethoxysilane [ CH3 Si(OC2 H-5)(3), MTES] as precursors, two kinds of methyl-modified silica gels were prepared by the two-step method and co-hydrolysis method. The gels were tested at the small angle x-ray scattering( SAXS) Station of Beijing Synchrotron Radiation Facility( BSRF). We calculated the average particle diameter and the special surface area between the two phases. On the basis of these data the fractal characters of gels were analyzed, and two fractal structures were found in all the samples. The two fractal dimensions indicated two fractal structures on two scales, i.e., from primary SiO2 particles to first-aggregates and from first- aggregates to clusters. Aided by transmission electronic microscope (TEM) we confirmed the two different microstructures of the gels prepared using the two different methods. It can be said that SAXS is a powerful technigue to study microstructures of gel systems by studying its fractal structure.
出处 《物理学报》 SCIE EI CAS CSCD 北大核心 2003年第2期442-447,共6页 Acta Physica Sinica
基金 国家自然科学基金重点项目 (批准号 :2 0 13 3 0 40 )资助的课题~~
关键词 甲基改性凝胶 氧化硅 小角X射线散射 SAXS 双分形结构 散射强度 methyl-modified gel silica SAXS fractal structure
  • 相关文献

参考文献15

  • 1[1]Peter W J G Wijnen, Theo P M Beelen, Kees P J Rummens, Han C P L Saeijs and Rutger A Van Santen 1991 J.Appl.Cryst. 24 759
  • 2[2]Matejka L, Plestil J and Dusek K 1998 J.Non-Cryst.Solids 226 114
  • 3[3]Li Z H, Gong Y J, Zhang Y, Wu D, Sun Y H, Wang J, Liu Y and Dong B Z 2001 Chin. Phys. 10 429
  • 4[4]Brinker C J and Scherer G W 1990 SOL-GEL SCIENCE:The Physics and Chemistry of Sol-Gel Processing (San Diego:Academic) p97
  • 5[5]Zarzycki J 1990 J.Non-Cryst.Solids 121 110
  • 6[6]Keefer K D and Schaefer D W 1986 Phys.Rev.Lett. 56 2376
  • 7[7]Craievich A F 1987 J.Appl.Cryst 20 327
  • 8[8]Marliere C, Despetis F, Etienne P and Phalippou J 2001 J.Non-Cryst.Solids 285 148
  • 9[9]Marliere C, Despetis F, Etienne P and Phalippou J 2001 J.Non-Cryst.Solids 285 175
  • 10[10]Vollet D R, Donatti D A and Ibanez Ruiz A 2001 J.Non-Crytst.Solids 288 81

同被引文献17

  • 1王建军,徐西鹏.花岗石磨抛表面的双分形研究[J].金刚石与磨料磨具工程,2006,26(5):32-35. 被引量:4
  • 2陈群元,喻定权.湖南省城市体系规模分布的分形特征[J].国土与自然资源研究,2007(1):1-3. 被引量:6
  • 3Cowley J M, X-Ray measurement of order in single crystals of CuAu[J]. J Appl Phys, 1950,21: 24-30.
  • 4Elliott S R. Medium-range structural order in covalent a- morphous solids[J]. Nature, 1991, 354:445- 452.
  • 5Bernal J D. Geometric approach to the structure of liquids [J]. Nature, 1959,183:141-147.
  • 6Waseda Y. The structure of non-crystalline materials: liquids and amorphous solids[M]. New York: McGraw-Hill, 2 : 1980..32-33.
  • 7Jin Guoqiang, Liang Ping, Guo Xiangyun, Novel method for sythesis of silicon carbide nanowires[J]. J Mater Sci Lett,2003, 22:767-770
  • 8Methivier C, Beguin B, Brun M, et al. Pd/SiC catalysts characterization and catalytic activity for the methane total oxidation[J]. J Catal, 1998,173:374-382
  • 9Huu C P, Bouchy C, Dintzer T, et al. High surface area silicon carbide doped with zirconium for use as catalyst support.Preparation, characterization and catalytic application[J].Appl Catal A, 1999,180:385-397
  • 10Jin Guoqiang, Guo Xiangyun. Synthesis and characterization of mesoporous silicon carbide[J]. Microporous and Mesoporous Mater, 2003,60 : 207-212

引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部