摘要
在传统蛇形流道的基础上,提出交变式、渐变式、喇叭式及分散式等非均匀样式的流道结构,通过建立等温、稳态质子交换膜燃料电池(PEMFC)三维仿真模型,分析非均匀流道对PEMFC传质及输出性能的影响。结果表明,相比普通蛇形流道,非均匀流道可有效改善流道内反应气体及产物的输运与分布,强化电化学反应过程,具有更高的膜电流密度,且可进一步平衡输运性能与压力损失匹配,有效提高PEMFC能量利用效率。其中,多样性分散流道(MD-Ⅵ)使PEMFC峰值电流密度提高10.2%,峰值功率密度提高14.2%,非均匀设计有望为PEMFC流道结构创新及优化提供更多思路。
Based on the traditional serpentine flow channel,several non-uniform flow channel structures with alternating,gradient,trumpet,and dispersed types were proposed in this paper.By establishing a three-dimensional isothermal steady-state PEMFC simulation model,the effects of non-uniform flow channels on the mass transfer characteristics and output performance of PEMFCs were analyzed.The results show that compared to the conventional serpentine flow channel,non-uniform designs can effectively improve the transport and distribution of reactant gases and products within the flow channel,enhance the electrochemical reaction process,and achieve higher membrane current densities.Furthermore,these designs can better balance transport performance and pressure loss matching,effectively improving the energy utilization efficiency of PEMFCs.Specifically,the MD-Ⅵflow channel increases the peak current density of PEMFCs by 10.2%and the peak power density by 14.2%.The non-uniform designs are expected to provide more ideas for the innovation and optimization of PEMFC flow channel structures.
作者
王乃潇
程友良
丁瑞
樊小朝
Wang Naixiao;Cheng Youliang;Ding Rui;Fan Xiaochao(Department of Power Engineering,North China Electric Power University,Baoding 071003,China;Hebei Key Laboratory of Low Carbon and High Efficiency Power Generation Technology,North China Electric Power University,Baoding 071003,China;School of Energy Engineering,Xinjiang Institute of Engineering,Urumqi 830023,China)
出处
《太阳能学报》
北大核心
2025年第10期173-179,共7页
Acta Energiae Solaris Sinica
基金
国家自然科学基金(52266018)
新疆工程学院博士启动金项目(2023XGYBQJ01)
新疆天山英才—青年科技拔尖人才项目(2022TSYCCX0051)。
关键词
氢能
质子交换膜燃料电池
非均匀流道
数值模拟
输出性能
传质
hydrogen energy
PEMFC
non-uniform flow channel
numerical simulation
output performance
mass transfer
