摘要
精确的木材引燃模拟方法在建筑及森林消防安全领域具有应用潜力。该研究基于Fluent模拟环境及小尺寸柱状木块在正庚烷火源下的引燃实验结果,提出了基于Fluent UDF的木块引燃模拟方法。通过木块引燃实验揭示了引燃过程的3个阶段,并建立了炭化层内部生物质转化率分布模型。基于实验数据和转化率分布模型对木块引燃过程进行模拟复现,木块热重模拟结果与实验结果相吻合,证明该模拟方法有效。该研究可为火蔓延模拟研究提供Fluent模拟环境下的方法参考。
[Objective]The accurate combustion simulation of wood is essential for improving fire safety in architectural and wildland contexts.Existing studies,which predominantly rely on fire dynamics simulators(FDS),face considerable limitations,particularly in terms of grid adaptability for curved geometries and the oversimplification of pyrolysis models.These limitations often result in substantial deviations from experimental data,thereby reducing the reliability of fire safety predictions.This study develops a comprehensive simulation framework for wood ignition using ANSYS Fluent to address the above gaps.This framework is validated through controlled experiments to improve its predictive accuracy for fire dynamics.[Methods]The experimental phase of this study employed small cylindrical Finnish pine wood blocks,each with a diameter and length of 30 mm.The wood blocks had an average moisture content of 8.68%and an apparent density of 460.27 kg/m3.Thermogravimetric analysis(TGA)was conducted to quantify wood moisture content,which was found to be 8.87%,and pyrolysis conversion rate,which reached 0.745 at 500°C.Ignition tests were performed under a heptane flame,revealing mass loss ratios of 20%50%within just 2 min.This remarkable mass loss was attributed to surface charring and the development of internal pyrolysis gradients.Combustion was further characterized by three distinct stages:an evaporation stage(Stage I)marked by slow mass loss;a rapid pyrolysis stage(Stage II)defined by accelerated degradation;and a slow mass decline stage(Stage III),wherein the accumulation of a char layer inhibited further reactions.Postcombustion analysis highlighted the formation of a uniform 5 mm char layer,with internal conversion rate gradients showing a surface value of 19.14%and low internal values.These gradients were influenced by gas permeability and temperature distribution within the wood.In the numerical simulation phase,ANSYS Fluent was employed to model the complex multiphase processes involved in wood ignition.User-defined functions(UDFs)were developed to incorporate drying and pyrolysis.Wood components were simplified into moisture and organic matter,with porosity values of 0.6760.679 derived from cell wall density measurements.Pyrolysis kinetics were modeled using a modified Arrhenius model,integrating parameters obtained from TGA.A virtual heat-exchange layer was introduced to adjust surface heating rates,effectively mimicking the insulating effect of water vapor observed in experiments.A rotating slip-grid method ensured the uniform heating of the wood sample.Meanwhile,the large eddy simulation was employed to capture the turbulent combustion of heptane.Radiation effects were modeled using the discrete ordinates approach,which was coupled with energy equations to account for stage changes and chemical reactions.[Results]The key innovations of this study include the development of a spatially resolved conversion rate gradient model for char layers with the thickness x,expressed asαs(x)=e-0.28-x,and dynamic porosity adjustments to reflect gas transport limitations within the wood.Simulation results demonstrate strong agreement with experimental mass losses,thereby validating the proposed method.This study reveals that surface charring substantially decelerates pyrolysis by reducing gas permeability,whereas internal temperature gradients govern the cessation of reactions within the wood.[Conclusions]This work establishes a robust Fluent-based framework for simulating wood ignition,effectively overcoming the limitations of FDS through advanced mesh resolution and detailed pyrolysis modeling.By integrating experimental data into UDFs,the method established herein enhances predictive capabilities for fire spread in structural and environmental fire scenarios.Future research could focus on expanding the model to incorporate heterogeneous secondary reactions,thereby further bridging the gap between simulations and real-world fire behavior.
作者
陈凡宝
朱国庆
孔得朋
Rajnish SHARMA
CHEN Fanbao;ZHU Guoqing;KONG Depeng;Rajnish SHARMA(College of Mechanical and Electronic Engineering,China University of Petroleum(East China),Qingdao 266580,China;School of Safety Engineering,China University of Mining and Technology,Xuzhou 221116,China;Department of Mechanical Engineering,University of Auckland,Auckland 1142,New Zealand)
出处
《清华大学学报(自然科学版)》
北大核心
2025年第6期1120-1127,共8页
Journal of Tsinghua University(Science and Technology)
基金
国家自然科学基金面上项目(51874344)
中央高校基本科研业务费专项资金资助项目(24CX06058A)
山东省泰山学者项目(tsqn202408092)
国家留学基金委资助项目(202206420073)。
