摘要
为压缩电务因电缆、电路故障处理时间,合理有效地降低电务责任故障事故率,针对站联电路故障发生后故障判断隐蔽,涉及反应本站、邻站之间区段空闲、占用,以及信号开放的条件的问题,提出站联故障报警方案,改善复杂站联条件下故障处理长大延时的问题。经过实际实验结果表明,提出的站联电路故障报警方案能有效缩短应急人员的处理时间,降低故障处理中的事故率。
In order to reduce the processing time of cable and circuit faults and reduce the accident rate of signaling and communication reasonably and eff ectively,a fault alarm scheme is proposed for the liaison circuits between stations.This scheme aims to reduce the prolonged delays in fault processing under complex conditions of these liaison circuits.It addresses the diffi culties in identifying the faults after they occur in liaison circuits,which involve the accurate display of cleared and occupied sections between the current station and neighboring stations,as well as the conditions of signal at clear.The experimental results show that the proposed scheme can eff ectively shorten the processing time for emergency personnel and reduce the accident rate during fault processing.
出处
《铁路通信信号工程技术》
2024年第S1期29-33,共5页
Railway Signalling & Communication Engineering
关键词
站联电路
故障报警
长大延时
降低事故率
liaison circuit between stations
fault alarm
prolonged delay
reduce the accident rate
