摘要
This article aims tomodel and analyze the heat and fluid flow characteristics of a carboxymethyl cellulose(CMC)nanofluid within a convergent-divergent shaped microchannel(Two-dimensional).The base fluid,water+CMC(0.5%),is mixed with CuO and Al2O3 nanoparticles at volume fractions of 0.5%and 1.5%,respectively.The research is conducted through the conjugate usage of experimental and theoretical models to represent more realistic properties of the non-Newtonian nanofluid.Three types of microchannels including straight,divergent,and convergent are considered,all having the same length and identical inlet cross-sectional area.Using ANSYS FLUENT software,Navier-Stokes equations are solved for the laminar flow of the non-Newtonian nanofluid.The study examines the effects of Reynolds number,nanoparticle concentration and type,and microchannel geometry on flow and heat transfer.The results prove that the alumina nanoparticles outperform copper oxide in increasing the Nusselt number at a 0.5% volume fraction,while copper oxide nanoparticles excel at a 1.5%volume fraction.Moreover,in the selected case study,as the Reynolds number increases from 100 to 500,the Nusselt number rises by 56.26% in straight geometry,52.93% in divergent geometry,and 59.10%in convergent geometry.Besides,the Nusselt number enhances by 18.75% when transitioning from straight to convergent geometry at a Reynolds number of 500,and by 19.81%at a Reynolds number of 1000.Finally,the results of the research depict that the use of thermophysical properties derived from the experimental achievements,despite creating complexity in the modeling and the solution method,leads to more accurate and realistic outputs.
