期刊文献+

温度对煤造气制备碳化铁的影响

The influence of temperature on iron carbide made with the gas from coal
在线阅读 下载PDF
导出
摘要 研究了以煤造气为还原剂制备碳化铁过程中温度对还原度、金属化率、碳化铁率的影响 ,实验条件为压力 0 3MPa、反应时间 1 80min、还原气体中CO/CO2 分别为 3和 1 5,反应温度在 550~ 70 0℃之间变化。通过实验研究得到如下结论 :产物的还原度、金属化率随温度的升高而逐渐增大 ;碳化铁率在 60 0℃时最小 ;在气体成分达到一定还原势 (CO/CO2 =3 )的条件下 ,70 0℃时碳化铁率最高 ;而在CO/CO2 =1 5时 ,高温下不利于碳化铁的生成。 This paper studied the effects of the temperature on the reduction degree,metallic ratio and iron carbide ratio in the process of iron carbide production gas out of coal in the condition of 550~700℃,0 3 MPa,180 min.,CO/CO 2=3 or 1 5.The results showed that the reduction degree and the metallic ratio increased with the increase of the temperature;Iron Carbide ratio is the minimum at 600℃;When CO/CO 2=3,at the temperature of 700℃,iron Carbide ratio is the maximum;When CO/CO 2=1 5,high temperature is unufavorable for the iron carbide.
出处 《河北理工学院学报》 2002年第4期12-15,19,共5页 Journal of Hebei Institute of Technology
关键词 温度 制备 煤造气 碳化铁 还原 高炉炼铁 gas out of coal iron carbide temperature
  • 相关文献

参考文献1

  • 1王光辉.利用CO·CO·H2混合气体生产碳化铁的研究[M].沈阳:东北大学,1998..

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部