摘要
目的在包装机变频调速控制系统设计中,受到控制方式的影响,使得控制系统所需能耗较高,为提高控制系统效能,基于PLC技术提出包装机变频调速控制系统设计。方法硬件部分,对可编程控制箱、变频器进行设计。软件部分,通过变频器参数的设计保证变频调速系统正常运行。针对PLC技术,设计控制系统中所需的PLC程序,达到控制包装机变频调速的效果。依靠触摸屏的方式呈现PLC程序输出结果,最终完成包装机变频调速控制系统的设计。结果实验结果表明,文中设计的控制系统与2种传统控制系统相比,所需能耗分别降低了49.5%和39.2%。结论控制系统运行所需的能耗降低,该设计在实际应用中具有良好的效果。
In the design of variable frequency speed control system of packaging machine,due to the influence of control mode,the energy consumption of the control system is high.The work aims to design a variable frequency speed control system of packaging machine based on PLC technology.In the hardware part,the programmable control box and the frequency converter were designed.In the software part,through the design of the inverter parameters,the normal operation of the frequency control system was ensured.Aiming at PLC technology,the PLC program needed in the control system was designed to achieve the effect of controlling the frequency conversion speed regulation of the packaging machine.Finally the output of PLC program was presented through touch screen.The design of variable frequency speed control system of packaging machine was completed.The experimental results showed that compared with the two traditional control systems,the energy consumption of the control system designed in this work was reduced by 49.5%and 39.2%respectively.The energy consumption of the control system is reduced,and the research has a good effect in practical application.
作者
杜瑞涛
冯振华
DU Rui-tao;FENG Zhen-hua(Xuchang Electrical Vocational College,Henan Xuchang 461000,China)
出处
《包装工程》
CAS
北大核心
2022年第21期260-265,共6页
Packaging Engineering
关键词
可编程逻辑控制器
包装机
变频调速
变频器
programmable logic controller(PLC)
packaging machine
variable frequency speed regulation
frequency converter
