摘要
为揭示高速燃油离心泵内部空化形态及隔舌区域空化的发生工况,对其进行了非定常数值计算,分析了不同流量下高速燃油泵内空化流场特性及压力瞬态特性。结果表明:在不同流量下,空泡首先在叶片前缘生成;随着空化数降低,空泡在叶片根部及延伸叶片背面产生;在1.2倍设计流量下隔舌区域的空化在低空化数下发生;空化对叶片表面根部的压力载荷影响较大;叶轮流道监测点压力脉动主频为叶轮轴频;隔舌监测点脉动主频为叶频,在1.2倍设计流量下的低空化数下隔舌区域监测点压力脉动频谱上轴频倍频特征增强。
In order to reveal the cavitation form in the high-speed fuel centrifugal pump and the occurrence condition of cavitation in the tongue region,unsteady numerical calculation was carried out,and the characteristics of cavitation flow field and pressure transient characteristics in the high-speed fuel pump at different flow rates were analyzed. The results show that the cavitation first appears on the leading edge of the blade under different flow rates. As the cavitation number decreases,cavitation occurs at the root of the blade and the back of the extended blade. The cavitation in the tongue region is at a low cavitation number under 1.2 times design flow rate.Cavitation has a greater impact on the pressure load on the root of the blade surface. The main frequency of the impeller channel monitoring point is the axial passing frequency. The main frequency of the pulsation of the tongue monitoring point is the blade passing frequency. Under the 1.2 times design flow rate,the frequency doubling characteristic of axial frequency is enhanced in the pressure fluctuation spectrum of monitoring point in tongue region.
作者
王凯
龚永祥
罗光钊
刘厚林
王玥
王航
WANG Kai;GONG Yong-xiang;LUO Guang-zhao;LIU Hou-lin;WANG Yue;WANG Hang(Research Center of Fluid Machinery Engineering and Technology,Jiangsu University,Zhenjiang 212013,China;Xinxiang Aviation Industry(Group)Co.,Ltd.,Xinxiang 453003,China;Xi’an Aerospace Propulsion Institute,Xi’an 710199,China;AECC Xi’an Power Control Technology Co.Ltd.,Xi’an 710077,China)
出处
《推进技术》
EI
CAS
CSCD
北大核心
2022年第10期299-312,共14页
Journal of Propulsion Technology
基金
国家自然科学基金(51979124)
中国博士后科学基金(2021M692709)。
关键词
高速燃油离心泵
空化特性
临界空化数
叶片
载荷
压力脉动
数值计算
High-speed fuel centrifugal pump
Cavitation characteristics
Critical cavitation number
Blades
Pressure loads
Pressure fluctuation
Numerical calculation
