摘要
以双蛇形流场为基础,利用流体仿真软件Fluent建立燃料电池三维分布参数模型,采用数值模拟的方法,研究操作参数中进气加湿度和电池工作温度对PEMFC膜内温度分布、膜内含水量分布的影响。研究结果表明:随着PEMFC进气加湿度的增加,膜内温度和膜内含水量均逐渐增大;随着PEMFC工作温度的增加,膜内含水量逐渐减少,膜内温度逐渐增加且膜内温度分布均匀性不断提高。
Based on the double serpentine flow field,the fluid simulation software Fluent is used to establish the three-dimensional fuel celldistribution parameter model.And,the numerical simulation method is used to study the influence of the operating parameters of the intake air humidity and the battery operating temperature on the temperature and water distribution of the PEMFC membrane.The research results show thatthe temperature and water content in the membrane gradually increase with the increasing of PEMFC air intake and humidity.With the increasing of PEMFC working temperature,the water content in the membrane gradually decreases,the temperature in the membrane gradually increases,and the uniformity of internal temperature distribution increases.
作者
凌感
屈翔
贾秋红
张君
LING Gan;QU Xiang;JIA Qiuhong;ZHANG Jun(Key Laboratory of Advanced Manufacturing Technology for Automobile Parts,Ministry of Education,Chongqing University of Technology,Chongqing 400054,China;China Automotive Engineering Research Institute Co.,Ltd.,Chongqing 401120,China)
出处
《重庆理工大学学报（自然科学）》
CAS
北大核心
2022年第5期84-90,共7页
Journal of Chongqing University of Technology：Natural Science
基金
重庆市科委基金项目(cstc2019jscx-fxydX0020)。
关键词
质子交换膜燃料电池
水热均衡
进气加湿度
工作温度
proton exchange membrane fuel cell
water and heat balance
intake and humidity
operating temperature
