期刊文献+

Design and preliminary experimental research on a new biogas fermentation system by solar heat pipe heating 被引量:2

原文传递
导出
摘要 Biogas fermentation requires appropriate temperature,while the biogas fermentation can be affected by the low ambient temperature in winter.In order to overcome the negative effects of low temperature fermentation,a new type of solar heat pipe biogas fermentation heating system was designed and a preliminary experiment research on this system was conducted using cow manure as the raw material at 6%concentration and total fermentation volume of 175 L.The experimental results showed that when the system was in normal operation,the fermentation temperature rose every day by gradient.This gradient will gradually become smaller with the increase of fermentation liquid temperature,and the temperature can reach 38°C after stability.Using this solar heat pipe heating system,the fermentation liquid temperature can be increased by 5°C every sunny day.This solar heat pipe heating system plays a significant role in biogas fermentation.The results of economic analysis show that the system can realize the fermentation at constant temperatures of 25°C and 35°C respectively,and it can also save standard coal equivalent of 40 kg and 80 kg in winter and spring,respectively.
出处 《International Journal of Agricultural and Biological Engineering》 SCIE EI CAS 2016年第2期153-162,共10页 国际农业与生物工程学报(英文)
基金 Special Fund for Agro-scientific Research in the Public Interest,Ministry of Agriculture,China(No.201403019-1) the National Natural Science Foundation of China(Grant No.U1204523) Science and technology open cooperation project of Henan Province(Grant No.152106000046).
  • 相关文献

参考文献4

二级参考文献18

  • 1腾传钧,汪国英.沼气及节能综合利用技术[M].贵州科技出版社,2003:1-6.
  • 2Ali R Tekin,A Coskun Dalgic.Biogas production from olive pomace Resources[J].Conservation and Recycling,2000,(30):301-313.
  • 3[8]KAMOUN N,BOUZOUITA H,REZIG B.Fabrication and characterization of Cu2ZnSnS4 thin films deposited by spray pyrolysis technique[J].Thin Solid Films,2007,515(15):5949-5952.
  • 4[9]VIJAY K K,BANSAL A,LE PHUCAN,et al.Non-vacuum processing of CuIn1-xGaxSe2 solar cells on rigid and flexible substrates using nanoparticle precursor inks[J].2003,431(1):53-57.
  • 5[10]KAELIN M,RUDMANN D,TIWARI A N.Low cost processing of CIGS thin film solar cells[J].Solar Energy,2004,77(6):749-756.
  • 6[11]KAELIN M,RUDMANN D,TIWARI A N.Low-cost CIGS solar cells by paste coating and selenization[J].Thin Solid Films,2005,480(1):486-490.
  • 7[1]BENEDETTO F D,BERNARDINI G P,BORRINI D,et al.57Fe-and 119Sn-M(o)ssbauer study on stannite (Cu2FeSnS4)-kesterite(Cu2ZnSnS+4solid solution[J].Physics and Chemistry of Minerals,2005,10:269.
  • 8[2]SEOL J S,LEE S Y,LEE J C,et al.Electrical and optical properties of Cu2ZnsoS4 thin films prepared by magnetron sputtering process[J].Solar Energy Materials & Solar Cells,2003,75(1/2):155-162.
  • 9[3]KATAGIRI H.Cu2ZnSnS4 thin film solar cells[J].Thin Solid Films,2005,480/481(1):426-432.
  • 10[4]TANAKA T,NAGATOMO T,KAWASAKI D,et al.Preparation of Cu2ZnSnS4 thin films by hybrid sputtering[J].Journal of Physics and Chemistry of Solids,2005,66(11):1978-1981.

共引文献60

同被引文献3

引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部