摘要
针对丘陵山区地块面积小、道路狭窄,大型联合收割机运输难、进地难、转场难、操作难等现状,解决胡麻茎秆易缠绕、易堵塞、难喂入等问题,该研究设计了一种履带式丘陵山地胡麻联合收割机。该机采用防缠绕低损割台、纹杆+杆齿组合式小锥度横轴流脱粒滚筒、组合式窄栅格凹板等结构,可实现胡麻茎秆的防缠绕快速喂入、分段式脱粒与分离、清选等作业。试验结果表明:胡麻籽粒含水率为5.42%时,脱净率为98.76%、含杂率3.61%、破损率0.18%、割台损失率1.07%、夹带损失率0.25%,清选损失率0.81%、飞溅损失率0.26%、总损失率2.36%。作业期间整机运行平稳,作业指标符合胡麻机械化收获标准,满足胡麻机械化收获要求,可以作为丘陵山地胡麻联合收割机使用。
Flax is an important oil crop that is widely cultivated in the dry farming areas of Loess Plateau in Northwest and North China.The seed of flax is rich in high nutrition with many beneficial effects,such as anti-inflammatory,anti-cancer,and regulating blood lipid.A staged harvest is generally used to collect the flax seed in previous manual operations in remote mountainous areas.However,high labor intensity and low operating efficiency have seriously restricted mechanized harvesting in the sustainable development of the flax industry.Since Gansu Province is one of the main hilly planting areas of flax,large combine harvesters cannot run smoothly in the operation of transportation,field entry,and transfer,due mainly to the small blocks and narrow roads.In this study,a track combine harvester was designed for hilly mountain flax,combining with easy winding,high strength,and low mobility of flax stem.This machine included a crawler-type walking system,a low damage header to prevent winding,a transverse-flow beater with the grain rod and rod teeth with small taper,narrow-grid concave plates,and secondary cleaning.The whole feeding realized the joint harvest of flax in hilly areas,including dividing,cutting,conveying,threshing,separating,and cleaning.The crawler walking system adopted hydraulic steering and variable speed,showing the 360°in-situ steering with a turning radius of only 700 mm.In the anti-winding low damage header,an anti-winding plate was set in the feed section of the agitator wheel,while the number of telescopic teeth was reduced.As such,the rotational speeds of the threshing and agitator wheel were adjusted to realize the anti-winding of the flax stem.The threshing roller included the transverse-flow beater with the grain rod and rod teeth with small taper,thereby realizing the complete threshing and separation of the flax capsule.The secondary cleaning was composed of a large air-duct fan,a centrifugal fan,and a cyclone separator to implement two cleaning for flax threshing materials.A field experiment was carried out to evaluate the performance of the combine harvester.The results showed that when the water content of flax seeds was 5.42%,an optimal combination of parameters was achieved,where the threshing rate was 98.76%,the impurity rate was 3.61%,the damage rate was 0.18%,the header loss rate was 1.07%,the entrainment loss rate was 0.25%,the cleaning loss rate was 0.81%,the splash loss rate was 0.26%,and the total loss rate was 2.36%.The whole machine ran smoothly during the operation.The operation indexes fully reached the mechanized harvest requirements of flax to serve as a hilly flax combine harvester.
作者
史瑞杰
戴飞
刘小龙
赵武云
瞿江飞
张锋伟
秦大国
Shi Ruijie;Dai Fei;Liu Xiaolong;Zhao Wuyun;Qu Jiangfei;Zhang Fengwei;Qin Daguo(College of Mechanical and Electrical Engineering,Gansu Agricultural University,Lanzhou 730070,China;Chongqing SHINERAY Agricultural Machinery Co.,Ltd.,Chongqing 401329,China)
出处
《农业工程学报》
EI
CAS
CSCD
北大核心
2021年第5期59-67,共9页
Transactions of the Chinese Society of Agricultural Engineering
基金
现代农业产业技术体系专项资金项目(CARS-14-1-28)
甘肃省重点研发计划项目(20YF3WA019)
甘肃农业大学伏羲青年英才培养计划项目(Gaufx-03Y01)。
关键词
农业机械
联合收割机
试验
胡麻
丘陵山地
脱粒滚筒
凹板
agricultural machinery
combine harvester
experiments
flax
hilly and mountainous
threshing cylinder
concave
