期刊文献+

双侧独立电驱动履带车辆自动机械变速器线控换挡控制方法 被引量:7

Control Method for AMT Shifting of a Shift-by-wire Bilateral Electric Drive Tracked Vehicle
在线阅读 下载PDF
导出
摘要 为应用自动机械变速器(AMT)实现双侧独立电驱动履带车辆的换挡,降低换挡控制难度,设计非道路行驶时的换挡控制方法。基于无离合器、有同步器的两挡行星AMT,通过线控系统及纯电动换挡机构进行换挡操纵;对驱动电机调速以实现主动同步,接近同步后开始挂挡,由同步器辅助精确同步;使两侧变速器同时开始换挡,但不要求两侧精确同时完成。在软土路面进行实车正向行驶试验,连续换挡多次均成功,换挡过程稳定流畅。试验结果表明:同步器未明显发生锁止与磨损;升挡及减挡时间均会随换挡起始车速的增高而增加;换挡起始车速不变时,升挡时间常大于减挡时间;两侧换挡用时差异性较小,基本同时完成;换挡期间,外界影响主要表现为行驶阻力,导致车辆减速,车辆未因路面的随机差异性而出现两侧明显差速现象。 A suitable simplified shifting control method is designed for using automated mechanical transmission(AMT)to realize the shifting of bilateral electric drive tracked vehicle.AMT is a clutchless two-speed planetary gearbox.Gear shifting is electric and driven by wire.During synchronizing phase,the speed of input shaft is roughly synchronized using traction motor;during gear engaging phase,the accurate speed matching is supposed to be ensured by the synchronizer.Two gearboxes are used for vehicle shifting.Their shifting processes start simultaneously and last independently.Upshifting and downshifting are tested for many times when driving forwardly on soft soil land.Test results show that shifting is executed successfully and efficiently;the synchronizers hardly lock to cause wear;upshifting needs longer time than downshifting as vehicle speed remains unchanged;upshifting and downshifting times both tend to be longer as vehicle speed becomes higher;two gearboxes accomplish shifting almost simultaneously;while shifting,the environment mainly causes vehicle speed reduction,and hardly causes the speed difference of vehicle track.
作者 赵屹东 陈慧岩 胡家铭 ZHAO Yidong;CHEN Huiyan;HU Jiaming(School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081, China)
出处 《兵工学报》 EI CAS CSCD 北大核心 2021年第3期459-467,共9页 Acta Armamentarii
关键词 履带车辆 两挡行星自动机械变速器 双侧独立电驱动 线控换挡 tracked vehicle two-speed planetary automated mechanical transmission bilateral electric drive shifting by wire
  • 相关文献

参考文献7

二级参考文献54

  • 1魏湘君,富亮.短程同步器的结构与设计特点[J].汽车技术,1989(11):13-18. 被引量:3
  • 2黄亚玲,秦大同,罗同云,龚为伦.基于ANSYS的斜齿轮接触非线性有限元分析[J].四川兵工学报,2006,27(4):31-33. 被引量:29
  • 3顾守丰,连小珉,颜磊,蒋孝煜.斜齿轮轮齿三维有限元网格自动生成及细化[J].清华大学学报(自然科学版),1996,36(8):77-82. 被引量:8
  • 4Glielmo L,Iannelli L,Vacca V,et al.Gearshift control for automated manual transmissions[J].IEEE Transactions on Mechatronics,2006,11(1):17-26.
  • 5Vasca V,Iannelli L,Senatore A,et al.Modeling torque transmissibility for automotive dry clutch engagement[C]∥American Control Conference,Seattle:IEEE,2008:306-311.
  • 6Yin X F,Xue D L,Cai Y.Application of time-optimal strategy and fuzzy logic to the engine speed control during the gear-shifting process of AMT[J].Fuzzy Systems and Knowledge Discovery,2007,(4):468-472.
  • 7王望予.汽车设计[M].第4版.北京:机械工业出版社,2006:100-108.
  • 8陈家瑞.汽车构造[M].第2版.北京:机械工业出版社,2006:52-50.
  • 9Gisbert L,Harald N.Automotive transmissions funamentals,selection,design and application[M].Germany:Springer-Verlag Berlin Heidelberg,1999.
  • 10王望予.汽车设计[M].4版.北京:机械工业出版社,2004:209-210.

共引文献81

同被引文献85

引证文献7

二级引证文献15

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部