期刊文献+

圆弧树杈型压电能量收集器的设计与研究 被引量:2

Design and Research of Circular Bifurcation Piezoelectric Energy Harvester
在线阅读 下载PDF
导出
摘要 由于单自由度的圆弧型悬臂梁具备多方向同频率吸收能量的优点,因此该圆弧树杈型压电能量收集器可以扩宽系统的工作频带并且具有较高的功率输出。文中建立了器件阵子模型用于描述多自由度圆弧树杈型压电能量收集器,通过理论模型分析可得四阶谐振频率为:4.08、4.38、4.50、4.74 Hz。基于非线性构型的压电方程,可得谐振频率下输出开路电压均在20 V左右,且水平与竖直方向上均有有效输出。 Since the single circular arc cantilever beam has the advantage of absorbing energy in multiple directions and at the same frequency,the circular bifurcation piezoelectric energy harvester can enlarge the working frequency band of the system and has a higher power output.A device array model which can describe the multi-degree of freedom structure such as the circular bifurcation piezoelectric energy harvester is established,through analyzing the theoretical model,the theoretical fourth order resonance frequency are:4.08 Hz,4.38 Hz,4.5 Hz,4.74 Hz.Based on the voltage equation of the nonlinear configuration,it can be obtained that the output open-circuit voltage at the resonant frequency is about 20 V,and there are effective outputs in both horizontal and vertical directions.
作者 宋娟 刘琪才 陆颢瓒 杨佳慧 朱宇宬 王德波 SONG Juan;LIU Qi-cai;LU Hao-zan;YANG Jia-hui;ZHU Yu-chen;WANG De-bo(College of Intelligent Manufacturing Institute,Qingdao Huanghai University,Qingdao 266427,China;College of Electronic and Optical Engineering,Nanjing University of Posts and Telecommunications,Nanjing 210023,China)
出处 《仪表技术与传感器》 CSCD 北大核心 2020年第7期38-42,共5页 Instrument Technique and Sensor
基金 国家青年自然科学基金项目(61704086) 中国博士后科学基金项目(2017M621692) 江苏省博士后基金项目(17011318) 南京邮电大学国自基金孵化项目(NY215139,NY217039) 南京大学近代声学教育部重点实验室开放课题资助项目(1704) 青岛黄海学院重点科研项目(2019KJ03)。
关键词 圆弧树杈型 多方向振动 宽频带 阵子模型 circular arc bifurcation multi-directional vibration broadband array model
  • 相关文献

参考文献7

二级参考文献66

  • 1王建华,敬大德,曹少飞.基于双悬臂梁结构的应变测量传感器研究[J].传感技术学报,2005,18(3):589-592. 被引量:16
  • 2娄利飞,杨银堂,樊永祥,李跃进.压电薄膜微传感器振动模态的仿真分析[J].振动与冲击,2006,25(4):165-169. 被引量:16
  • 3张晓星,唐炬,彭文雄,孟延辉,孙才新.GIS局部放电检测的微带贴片天线研究[J].仪器仪表学报,2006,27(12):1595-1599. 被引量:31
  • 4胡洪平,高发荣,薛欢,胡元太.低频螺旋状压电俘能器结构性能分析[J].固体力学学报,2007,28(1):87-92. 被引量:9
  • 5ROUNDY S J. Energy scavenging for wireless sensor nodes with a focus on vibration electricity conversion [D]. UC Berkeley, 2003: 19- 32.
  • 6WILLIAMS C B, SHEARWOOD S, YATES R B, et al. Development of an electromagnetic micro-generator[J]. IEEE Proc: Circuits, Devices and Syst, 2001, 148: 337-342.
  • 7KEE S M, LIANG H, YI J G, et al. Tire tread deformation sensor and energy harvester development for "smart tire" applications[C] //Proc of Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems. San Diego, USA, 2007: 1- 12.
  • 8JEONG S J, KIM M S, SONG J S. Two-layered piezoelectric bender device for micro-power generator [J]. Sensors and Actuators, 2008, 148 (1):158- 167.
  • 9LEE B S, LIN S C, WU W J. Comparison of the piezoelectric MEMS generators with interdigitat electrodes and laminated electrodes[C]//Proc of Smart Sensor Phenomena, Technology, Networks and Systems. San Diego, USA, 2008:1 - 8.
  • 10RAJENDRA K S. Piezoelectric micro power generator (PMPG) : A MEMS-based energy scavenger[M]. Massachusetts : Massachusetts Institute of Technol. 2003: 23-31.

共引文献112

同被引文献42

引证文献2

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部