期刊文献+

基于方差分解的堆芯下封头熔池模型敏感性分析 被引量:1

Sensitivity Analysis of Core Lower Head Molten Pool Model Based on Variance Decomposition
在线阅读 下载PDF
导出
摘要 下封头熔池模型是熔融物堆内滞留(IVR)有效性评价的重要模型,具有关系式复杂、输入参数多且具有较大不确定性的特点,传统的局部敏感性分析方法在进行复杂模型敏感性分析时具有计算量大、效率低的缺点。本文基于方差分解的全局敏感性分析方法,采用中国核动力研究设计院自主研发的敏感性分析工具SALib和熔融物堆内滞留软件CISER,针对下封头壁面热流密度比等5个关键结果参数开展了输入参数敏感性分析,得到了输入参数对关键结果的敏感性系数及影响趋势,可为下封头熔池模型和严重事故策略的优化提供参考。 The lower head molten pool model is an important model for the in-vessel retention(IVR)effectiveness evaluation.It has the characteristics of complex relationship,many input parameters and large uncertainty.The traditional local sensitivity analysis method has the disadvantages of large amount of calculation and low efficiency when performing sensitivity analysis of complex models.In the paper,based on variance decomposition of the global sensitivity analysis method,the sensitivity analysis library(SALib)and IVR analysis code CISER developed by Nuclear Power Institute of China were adopted to analyze the sensitivity of the input parameters for five key parameters,such as the lower head wall heat flux ratio.The sensitivity coefficient and influence tread of input parameters on key results were obtained,which provides a reference for the optimization of the lower head molten pool model and severe accident mitigation strategies.
作者 李治刚 安萍 明平洲 潘俊杰 芦韡 余红星 LI Zhigang;AN Ping;MING Pingzhou;PAN Junjie;LU Wei;YU Hongxing(Nuclear Power Institute of China,Chengdu 610041,China;Science and Technology on Reactor System Design Technology Laboratory,Chengdu 610041,China)
出处 《原子能科学技术》 EI CAS CSCD 北大核心 2020年第8期1409-1417,共9页 Atomic Energy Science and Technology
关键词 方差分解 熔池模型 全局敏感性分析 SALib variance decomposition molten pool model global sensitivity analysis SALib
  • 相关文献

参考文献3

二级参考文献19

  • 1Esmaili H, Khatib-Rahbar M. Analysis of In-vessel Retention and Ex-vessel Fuel Coolant Interaction for AP 1000[R].NUREG/CR-6849, Washington, U.S:Nuclear Regulatory Commission Office of Nuclear Regulatory Research,2004.
  • 2Powers D, Behbahani A. Density Stratification of Core Debris. In: Proceedings of the OECD [R]. Paris, France: MASCA Seminar, 2004.. Jean Marie Seiler,2007.
  • 3Consequences of Material Effects on In-vessel Retention[J]. Nuclear Engineer and Design, 2007,237:1752-1758.
  • 4Zhang Y P, Qiu S Z, Analysis of Safety Margin of In-Vessel Retention for AP1000[J]. Nuclear Engineering and Design. 2010,240:2023-2033.
  • 5Henry R E, Fauske K. External cooling of reactor vessel lower head under severe accident conditions[J]. Nuclear Engineering and Design, 1993, 64, 433-455.
  • 6Theofanous T G, Liu C, Addition S, et al. In-vessel coolability and retention of a core melt[J]. Nuclear Engineering and Design, 1997, 169, 1-48.
  • 7Kymalainen O, Yuomisto H, Theofanous T CL In-vessel retention of corium at the Loviisa plant[J]. Nuclear Engineering and Design, 1997, 169, 109-130.
  • 8Rempe J L, Knudson D L. Margin for in-vessel retention in the APRI400 -VESTA and SCDAP/RELAP5-3D analyses[R]. Technical Evaluation Report, INEEL/EXT- 04-02549, 2004.
  • 9Park J H, Jeong Y H, Won-pil B, et al. An assessment methodology for in-vessel corium retention by external reactor vessel cooling during severe accidents in PWRs[J]. Annals of Nuclear Energy, 2001, 28, 1237-1250.
  • 10Esmaili H, Khatib-Rahbar M. Analysis of likelihood of lower head failure and ex-vessel fuel coolant interaction energetics for API000[J]. Nuclear Engineering and Design, 2005, 235, 1583-1605.

共引文献14

同被引文献6

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部