期刊文献+

预改性片层粘土在溴化丁基橡胶中的应用 被引量:7

Application of Pre-modified Lamellar Clay in BIIR
在线阅读 下载PDF
导出
摘要 研究预改性片层粘土(100份丁苯橡胶纳米复合80份粘土)在溴化丁基橡胶(BIIR)中的应用。结果表明:预改性片层粘土在BIIR中能够实现均匀的纳米分散,粘土片层与橡胶分子链的作用力增强;与未加预改性片层粘土的胶料相比,预改性片层粘土/BIIR复合材料的交联密度减小,正硫化时间缩短,拉伸强度、拉断伸长率和拉断永久变形增大,60℃时的损耗因子减小,气密性明显提高,其具有很高的性价比。 The application of pre-modified lamellar clay[SBR/clay(dosage ratio 100/80)nanocomposite]in brominated butyl rubber(BIIR)was studied.The results showed that,uniform nano dispersion of the pre-modified lamellar clay in BIIR was achieved,and the interaction force between the lamellar clay and rubber molecular chain increased.Compared with the compound without the pre-modified lamellar clay,the crosslinking density of the pre-modified lamellar clay/BIIR composite decreased,the optimum curing time was shortened,the tensile strength,elongation at break and permanent deformation at break increased,the loss factor at 60℃decreased,the air tightness was significantly improved.The composite had a high performance cost ratio.
作者 李昭 刘磊 杨艳平 刘豫皖 程茹 吴晓辉 卢咏来 LI Zhao;LIU Lei;YANG Yanping;LIU Yuwan;CHENG Ru;WU Xiaohui;LU Yonglai(Beijing University of Chemical Technology,Beijing 100029,China;Aeolus Tyre Co.,Ltd,Jiaozuo 454000,China)
出处 《橡胶工业》 CAS 2020年第3期187-191,共5页 China Rubber Industry
关键词 粘土 有机改性 溴化丁基橡胶 复合材料 气密层 动态力学性能 气密性 clay organic modification BIIR composite inner liner dynamic mechanical property air tightness
  • 相关文献

参考文献3

二级参考文献15

  • 1罗萌春.子午线轮胎气密层BIIR配方研究[J].轮胎工业,2005,25(12):744-745. 被引量:2
  • 2贾清秀,向平,杨军,叶欣,吴友平,张立群.粘土/炭黑/NR纳米复合材料的性能研究[J].橡胶工业,2006,53(1):5-9. 被引量:9
  • 3赵蔚,吴友平,黄希,张立群.炭黑/蒙脱土/SBR纳米复合材料的性能研究[J].橡胶工业,2007,54(4):221-224. 被引量:3
  • 4Wu Y P,Wang Y Q,Zhang H F. Rubber-pristine Clay Nanocomposites Prepared by Co-coagulating Rubber Latex and Clay Aqueous Suspension[J].Composites Science and Technology,2005,(7/8):1195-1202.
  • 5Gent A N, Zhang L Q. Strain-induced Crystallization and Strength of Rubber[J]. Rubber Chemistry and Technology, 2002,75(5) :923-934.
  • 6Wu Y P,Wang Y Q,Zhang H F,et al. Rubber-Pristine Clay Nanocomposites Prepared by Co-coagulating Rubber Latex and Clay Aqueous Suspension[J]. Composites Science and Technology, 2005,65 (7-8) :1195-1202.
  • 7Wu X H,Wang Y O, Zhang L Q. Improved Crack Growth Resistance and Its Molecular Origin of Natural Rubber/Car- bon Black by Nanodispersed Clay[J]. Polymer Engineering & Science,2012,52(5) : 1027-1036.
  • 8Ma J H,Wang Y X,Zhang L Q,et al. Improvement of Cutting and Chipping Resistance of Carbon Back-filled Styrene Buta- diene Rubber by Addition of Nano-dispersed Clay[J]. Journal of Applied Polymer Science,2012,125(5) : 3484-3489.
  • 9Wu Y P, Zhao W, Zhang L Q. Improvement of Flex-fatigue Life of Carbon Black Filled Styrene-Butadiene Rubber by Ad- dition of Nanodispersed Clay [J]. Macromol. Mater. Eng., 2006,291: 944-949.
  • 10Chakraborty S,Kar S,Dasgupta S, et al. Effect of Treatment of Bis (3-triethoxysilyl propyl) Tetra Sulfane on Physical Property of in situ Sodium Activated and Organ Modified Bentonite Clay-SBR Rubber Nano-eomposite[J]. Journal of ADDlled Polymer Science,2010,116(3) :1660-1670.

共引文献12

同被引文献37

引证文献7

二级引证文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部