期刊文献+

煤体渗透率随酸化时间和压力及温度的变化规律 被引量:3

Change Laws of Coal Permeability with Acidification Time, Pressure and Temperature
在线阅读 下载PDF
导出
摘要 通过对3种不同煤样酸化前后的渗透率测试,分析每种煤样渗透率的变化趋势,在不同压力、温度条件下测试不同酸化时间下的渗透率,分析得出煤体酸化后渗透率随酸化时间、压力和温度变化的规律。结果表明:13#烟煤、2#贫瘦煤的渗透率优于3#无烟煤,即中低阶煤的酸化效果比高阶煤好;围压对于渗透率的影响较为明显,随着围压的增加,渗透率呈现出减小的趋势;不同煤样在温度增加的前期阶段,随着温度的升高,渗透率呈现出加速增大的态势;在酸化的中间阶段,渗透率逐渐下降;在温度增加的后期阶段,渗透率随温度的升高虽还有所降低,但变化趋势不再特别明显,逐渐进入平稳阶段。 Through the permeability test of three different coal samples before and after acidification,the change trend of permeability of each coal sample is analyzed,and then the permeability under different pressures and temperature conditions is tested under different acidification time,and the laws of permeability changing with acidification time,pressure and temperature are obtained.The results show that the permeability of 13^# bituminous coal and 2^# lean coal is better than that of 3#anthracite,that is,the acidification effect of medium and low rank coal is better than that of high rank coal;the influence of confining pressure on permeability is more obvious,with the increase of confining pressure,the permeability shows a decreasing trend;in the early stage of temperature increase,with the increase of temperature,the permeability of different coal samples decreases.In the intermediate stage of acidification,the permeability decreases gradually;in the later stage of temperature increase,the permeability decreases with the increase of temperature,but the change trend is no longer particularly obvious,and gradually enters a stable stage.
作者 李紫竹 LI Zizhu(China Coal Technology and Engineering Group Shenyang Research Institute,Fushun 113122,China;State Key Laboratory of Coal Mine Safety Technology,Fushun 113122,China)
出处 《煤矿安全》 CAS 北大核心 2019年第12期36-40,共5页 Safety in Coal Mines
关键词 煤体渗透率 酸化时间 压力 温度 变化规律 瓦斯抽采 coal permeability acidification time pressure temperature change law gas drainage
  • 相关文献

参考文献7

二级参考文献73

共引文献281

同被引文献57

引证文献3

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部