摘要
为适应摩擦焊接设备的发展,降低制造成本,在对惯性摩擦焊接过程运动学方程分析基础上,结合电模拟惯量技术,开发出了电模拟惯性摩擦焊接技术及设备.结果表明,电模拟惯性摩擦焊接过程中各参数随时间的变化规律,以及惯量大小对焊接参数的影响规律,符合惯性摩擦焊接的一般规律.相同惯量下,电模拟惯性摩擦焊接与机械惯量惯性摩擦焊接过程转速曲线变化趋势一致.采用电模拟惯性摩擦焊接技术,所需惯量可以设定成大于系统基本惯量,也可以设定成等于或低于系统基本惯量,还可以补偿主轴机械摩擦阻力对焊接过程参数的影响.
In order to adapt to the current development of friction welding equipment and reduce the manufacturing cost,the electro-simulated inertia friction welding technology and equipment are developed,based on the analysis of the kinematics equation of inertia friction welding process and the electric simulation inertia technology.The result shows that the regularity of the change of parameters over time and the influence of inertia size on welding parameters are in accordance with the general law of inertia friction welding during the electric simulation.The rotational speed curve of inertial friction welding is consistent with that of mechanical inertia friction welding process under the same inertia.The inertia can be set to be larger than the basic inertia of the system,and can be set to equal or lower than the basic inertia of the system by electric simulation inertial friction welding technology.The effect of friction resistance of spindle on the parameters of welding process can be compensated by electrosimulated inertial friction welding technique.
作者
杜随更
赵鑫哲
李志远
DU Suigeng;ZHAO Xinzhe;LI Zhiyuan(Key Laboratory of High Performance Manufacturing for Aero Engine(Northwestern Polytechnical University),Ministry of Industry and Information Technology,Xi′an 710072,China;State Owned Assets Supervision and Administration Commission of Zhangjiakou,Zhangjiakou 075000,China)
出处
《焊接学报》
EI
CAS
CSCD
北大核心
2019年第10期8-14,I0001,共8页
Transactions of The China Welding Institution
基金
国家自然科学基金资助项目(51675434)
关键词
惯性摩擦焊
电模拟惯量
摩擦焊
inertia friction welding
electrical inertia simulation
friction welding
