期刊文献+

垂直列管加热的搅拌槽中温度场的测量与数值模拟 被引量:1

MEASUREMENT AND NUMERICAL SIMULATION OF TEMPERATURE DISTRIBUTIONS IN AGITATED TANK EQUIPPED WITH PBT IMPELLER
在线阅读 下载PDF
导出
摘要 在装有 4组对称垂直加热列管、直径为 5 0 0mm的搅拌槽中使用PBT桨进行搅拌 ,以甘油为工作物料 ,采用液晶测温技术测量搅拌槽内温度的分布 .实验研究了温度随时间的变化以及搅拌转速对温度分布的影响 .采用计算流体力学软件CFX - 4对槽内轴向、径向温度分布进行数值模拟 ,并将模拟结果与实验结果进行了比较 。 A liquid crystal technique was used to investigate the temperature profile in an agitated tank equipped with a PBT impeller. Four sets of vertical tubes were symmetrically fixed in the agitated tank with diameter of 500 mm. A mixture of cholesteric liquid crystals was dispersed homogeneously in glycerol. The effects of time, rotation speeds on the temperature profile were discussed. The commercial CFD code CFX-4.3 was used to simulate the axial and radial temperature profiles in the tank. And the results of the simulation were compared to the experimental data. The CFD predictions are in good with experimental data.
出处 《化工学报》 EI CAS CSCD 北大核心 2002年第11期1175-1181,共7页 CIESC Journal
基金 国家自然科学基金 (No .2 99760 0 2 ) 橡胶新型材料合成国家工程研究中心基金资助项目~~
关键词 垂直列管 加热 温度场 搅拌槽 液晶测温技术 温度分布 数值模拟 Computer simulation Liquid crystals Measurements Temperature distribution
  • 相关文献

参考文献4

二级参考文献8

共引文献14

同被引文献15

  • 1覃文洁,胡春光,郭良平,左正兴.近壁面网格尺寸对湍流计算的影响[J].北京理工大学学报,2006,26(5):388-392. 被引量:53
  • 2钱小静,王志峰,黄雄斌.搅拌槽中垂直列管外壁表面传热系数的模拟计算[J].过程工程学报,2007,7(5):853-858. 被引量:2
  • 3Zakrzewska B,Jaworski Z.CFD modelling of turbulent jacket heat transfer in a Rushton turbine stirred vessel[J].Chemical Engineering&Technology,2004,27(3):237-242.
  • 4Lakghomi B,Kolahchian E,Jalali A,et al.Coil and jacket's effects on internal flow behavior&heat transfer in stirred tanks[J].World Academy of Science,Engineering and Technology,2008,24:873-877.
  • 5Jayakumar J S,Mahajani S M,Mandal J C,et al.Experimental and CFD estimation of heat transfer in helically coiled heat exchangers[J].Chemical Engineering Research and Design,2008,86(3):221-232.
  • 6Kumar V,Faizee B,Mridha M,et al.Numerical studies of a tube-in-tube helically coiled heat exchanger[J].Chemical Engineering and Processing,2008,47(12):2287-2295.
  • 7ZHANG Shi-shuai(张师帅).计算流体动力学及其应用[M].武汉:华中科技大学出版社,2011.
  • 8Kelly W J,Humphrey A E.Computational fluid dynamics model for predicting flow of viscous fluids in a large fermentor with hydrofoil flow impellers and internal cooling coils[J].Biotechnol Prog,1998,14(2):248-258.
  • 9STOESSEL F(弗朗西斯·施特塞尔).化工工艺的热安全-风险评估与工艺设计[M].北京:科学出版社,2009.
  • 10Bourne J R,Buerli M,Regnass,W.Heat transfer and power measurement in stirred tanks using heat flow calorimetry[J].Chem Eng Sci,1981,36(2):347-354.

引证文献1

二级引证文献12

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部