摘要
以试件轮廓算数平均值作为表面粗糙度的判别标准,采用格丽斯仿古涂饰工艺对改性杨木进行表面涂饰,分析涂饰工艺对改性杨木表面粗糙度的影响。结果表明:砂纸目数对改性杨木表面漆膜粗糙度影响最大,底漆喷涂道数影响最小。漆膜粗糙度优化工艺条件为底漆喷涂道数2道、砂纸目数240目、素材修色喷涂道数1道、表面修色道数1道。
In order to analyze the influence of the antique painting process on the film roughness of the modified poplar, the average value of the contour of test wood was used as the criterion for the film roughness. The modified poplar was surface-painted by the Glaze method. The results showed that the number of sandpaper has the greatest influence on the film roughness of modified poplar,and the influence of primer coating number is the smallest. The optimum process conditions of film roughness are: the primer coatings is 2,the number of sandpaper is 240 mesh,the painting number of wood color correction is 1 and the surface color correction is also 1.
作者
陶鑫
毛泽南
徐伟
陈昌华
唐先良
TAO Xin;MAO Ze-nan;XU Wei;CHEN Chang-hua;TANG Xian-liang(College of Furnishings and Industrial Design, Nanjing Forestry University, Nanjing 210037, China;Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing Forestry University, Nanjing 210037, China;Jiangsu Youzun Furnishings Manufacturing CO., LTD., Yancheng 224000, China;Yuhuan Zhongchuang Scientific & Technological Center, Yuhuan 317605, China)
出处
《林产工业》
北大核心
2019年第6期33-36,共4页
China Forest Products Industry
基金
国家重点研发计划资助(2017YFD0601104)
盐城市“515”领军人才项目(2016)
台州市“500精英计划”项目(2014)
