摘要
针对故障齿轮振动信号的非平稳和调制特性,提出了在变分模态分解(VMD)-模平方阈值降噪的基础上利用概率神经网络(PNN)进行齿轮故障诊断的方法。首先,利用VMD将原始振动信号分解为若干个本征模态函数分量,采用模平方阈值方法对各分量处理后并重构;然后,提取重构信号的峭度和均方根作为特征值组成特征向量;最后,将特征向量输入PNN实现故障类型识别。通过齿轮故障试验分析,将其与基于EMD-模平方阈值、LMD-模平方阈值和EEMD-模平方阈值的BP神经网络故障诊断方法相比较。结果表明,该方法能有效的提取特征信息,故障诊断准确率高达96.875%,证明了所提方法的可行性和有效性。
Aiming at non-stationary and modulation characteristics of fault vibration signals of gear,a fault diagnosis method is proposed by using the probabilistic neural network(PNN)on the basis of the variational mode decomposition(VMD)-modulo square threshold diagnosing.Firstly,the signals was decomposed into the several intrinsic mode functions(IMF)and each one was processed with the modulo squared threshold method.Then,the kurtosis and root mean square of the signals which were reconstructed with IMFs after the modulo squared threshold method were extracted as fault feature vectors for pattern recognition.Finally,the feature vector was input PNN model to realize the fault type identification.Through gear fault tests,based on EMD-modulo square threshold,LMD-modulo square threshold and EEMD-modulo square threshold,the accuracy was up to 96.875%comparing with BPNN,in which the feasibility and effectiveness of the present method was verified.
作者
张雪英
刘秀丽
栾忠权
Zhang Xueying;Liu Xiuli;Luan Zhongquan(The Ministry of Education Key Laboratory of Modern Measurement and Control Technology, Beijing Information Science and Technology University,Beijing 100192,China)
出处
《机械科学与技术》
CSCD
北大核心
2018年第12期1895-1901,共7页
Mechanical Science and Technology for Aerospace Engineering
基金
国家自然科学基金项目(51275052)
国家高技术发展研究计划项目(2015AA043702)
北京市教育委员会科技计划一般项目(KM201811232023)资助
关键词
变分模态分解
模平方阈值
概率神经网络
齿轮
故障诊断
variational mode decomposition(VMD)
modulo square threshold
probabilistic neural network(PNN)
gear
fault diagnosis
