期刊文献+

高温退火Fe-Cr基减振合金的阻尼性能与晶界析出相 被引量:3

Damping Capacity and the Grain Boundary Precipitates in Fe-Cr Based Damping Alloys
在线阅读 下载PDF
导出
摘要 对 14 73K退火的 Fe- Cr- 2 Al- Si,Fe- Cr- Al,Fe- Cr- Si以及 Fe- Cr- Al- Si(L)等 Fe- Cr基减振合金的阻尼性能和晶界析出相进行了研究。结果表明 ,这些合金中所析出的晶界相均由 Cr和 Fe两种元素构成 ,并且合金的阻尼性能与这种晶界相析出量的多少以及晶界相中 Cr含量的高低存在对应关系。Fe- Cr- 2 Al- Si合金中晶界相的析出量最少且Cr含量最低 ,这种合金的阻尼性能最好 ;Fe- Cr- Al- Si(L)合金中晶界相的析出量最多且 Cr含量最高 ,该合金的阻尼性能最差 ;Fe- Cr- Al和 Fe- Cr- Si两种合金的晶界析出相中的 Cr含量十分接近 ,但前者晶界相的析出量明显低于后者 。 The damping capacity and grain boundary precipitates of some Fe Cr based damping alloys annealed at 1473K was studied The results indicate that the precipitates on the grain boundaries are chemically composed of chromium and iron and the damping capacity of the alloys is definitely related to the amount of the precipitates as well as to chromium content in the precipitates Among the alloys investigated, the damping capacity of Fe Cr 2Al Si alloy is the highest while its amount of grain boundary precipitates is the least with the lowest chromium content and vice versa to that of Fe Cr Al Si(L) alloy Though chromium content in the grain boundary precipitates of Fe Cr Al alloy is very close to that of Fe Cr Si alloy, the amount of grain boundary precipitates in the former is obviously lower than that in the latter and the damping capacity of the former is apparently higher than that of the latter
出处 《材料工程》 EI CAS CSCD 北大核心 2002年第9期3-6,25,共5页 Journal of Materials Engineering
关键词 高温退火 Fe-Cr基减振合金 阻尼性能 晶界析出相 铁铬基合金 减振材料 Fe Cr based damping alloy damping capacity grain boundary precipitates
  • 相关文献

参考文献2

二级参考文献2

共引文献15

同被引文献20

引证文献3

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部